Panels Non-Weatherproof Weatherproof MurphyLink Designed & Built in Australia for Australian conditions of Macquarrie
Non-Weatherproof Our range of non-weatherproof panels provide high-quality and reliable engine monitoring. mounting options for indoor protected installations. With a range of panel options covering everything from basic engine protection panels, to the advanced irrigation control panels complete with engine run-down timer, you can be sure to find the right panel at the right price. Designed & Built in Australia for ustralian conditions
Weatherproof Our range of weatherproof panels are designed with Australian conditions in mind. Enclosed in PolyCarbonate plastic enclosures that provide excellent resistance against water, dust and mud ingress; the WP-Range of panels are built to last. With a range of panel options covering everything from basic engine protection panels, to the advanced irrigation panels complete with an engine run-down timer and first-outindication for fault finding, you can be sure to find the right panel at the right price. Designed & Built in Australia for ustralian conditions Controller Conditions C Features reference Non- Weather proof Weather proof Oil pressure Water temp Air temp Tacho hrs-alt Volts Pump pressure Time clock Key switch Shutdown relay First out indication Annunciation Wiring schematics are also provided to assist in installation. to suit and gauge capillaries of the same length. Wiring schematics are also provided to assist in installation.
MurphyLink ML2000 The Next-Generation Murphy Control Panel Automatic control, monitoring and regulation for your diesel-powered irrigation or industrial application. Electronic Engine Options The ML2000 is well-suited to a large range of electronically governed engines that support SAE J1939 CAN communications. The controller is able to monitor a range of parameters transmitted by the ECM and provide text descriptions for a wide range of common fault codes. The controller is able to dictate desired engine speeds via TSC1 messaging and supports a range of engine and pump protection functions such as warm-up, cool-down and line-fill. It will also dynamically calculate and adjust engine speed in order to regulate a desired parameter (such as pump discharge pressure). Interfacing with an electronic engine is often a simple procedure, but please be sure to contact us for information on you specific engine and requirements. Mechanical Engine Options The ML2000 is equally compatible with mechanically governed engines when coupled with a range of sensors to monitor engine health. The controller supports a large number of sensor inputs to monitor and protect common engine parameters and will protect the engine with fully-configurable safe operating ranges. The two primary applications for mechanical engines are those which involve a fixed run-speed, and those which require variable run speed. Fortunately the ML2000 happily supports both, with the addition of a throttle actuator (the Murphy ATO3069) which provides all of the fine throttle control you would require for functions such as warm-up, cool-down, line-fill and parameter regulation. Kits are available which include engine sensors and a basic loom which runs from the ML2000 controller to bare ends for customer up-fit. Variable speed kits also include the Murphy ATO3069 throttle actuator, a throttle cable and a powder-coated stand to mount the ML2000 and ATO3069 throttle actuator. Macquarrie Corporation stocks and manufactures a range of engine harnesses to suit most major engine manufacturers, so please be sure to contact us for information on your specific engine and requirements.
About us Macquarrie Corporation has been operating for over 65 years and has grown from a company that specialised in diesel engine reconditioning to one which now offers a multitude of products to a wide range of markets. The company is a second generation family owned business and has two executive directors - Adrian Macquarrie (Managing Director) and Russell Macquarrie (Director). The company employs 90 staff and has an annual turnover of approximately AUD$40 million. of Macquarrie www.macquarrie.com.au Macquarrie Corporation Pty Ltd Head Office, Melbourne 1620 Sydney Road Campbellfield, Victoria 3061 Tel (03) 9358 5555 Fax (03) 9358 5556 Brisbane Branch 1262 Boundary Road Wacol, QLD 4076 Tel (07) 3271 5011 Fax (07) 3271 5022 Townsville Branch 485 Woolcock Street Garbutt, QLD 4814 Tel (07) 4725 0799 Fax (07) 4725 0811 Cairns Branch 101-103 Aumuller Street Portsmith, QLD 4870 Tel (07) 4035 3442 Fax (07) 4035 3443