The assembly of a modern and universal access system based on outdoor BKT Elektronik distribution cabinets is possible thanks to the application of cutting - edge solutions in compliance with Polish as well as international telecommunication standards. Outdoor cabinets constitute a protection of passive and active devices mounted inside in every weather condition. Double-wall structure protects against heat, cold, rain, snow, as well as not permitted access. Due to its IK10 impact rating, the structure also protects against mechanical damage. Their ingress protection has been rated to IP55. The cabinets are made of 2 mm aluminum sheet and are coated with outdoor paint. They are estimated to be usable for 30 years as a result of tests conducted in an independent research lab. Contents External and internal tight cabinets, heating and cooling systems IP55 outdoor distribution cabinets Underground plinths for single-and double-jacket distribution cabinets MFG outdoor telecommunications cabinets Positioning of outdoor telecommunications cabinet type MFG IP55 Heating and cooling systems for external and internal distribution cabinets Internal industrial cabinets IP54, accessories Heating and cooling systems for internal industrial cabinets Environmental Condition Monitoring System External street distribution cabinets IP protection Outdoor FTTx Cabinets Certificates Realizations 1 1-4 5 5 6 6-7 8-9 10-11 12-13 14 15 16 17 18-22
External and internal tight cabinets, heating and cooling systems Protection of equipment against changeable whether conditions and against acts of vandalism and theft is a very important issue. External and internal cabinets are fitted both in generally available places and places with an adverse effect and must provide protection for the equipment inside. BKT cabinets are designed and made to meet all relevant requirements for cabinets to be placed inside and on the outside of buildings. Requirements to be met by external casing are contained in the following standards: ź Series of environmental tests for environmental conditions as per PN-ETSI EN 300 019-1-4, class 4.1 for cold tests Ae - PN-EN 60068-2-1:2007 and dry heat Be - PN- EN 60068-2-2:2007, Be sample. ź Simulated solar radiation at ground level and guidance for solar radiation testing PN-EN 60068-2-5; ź Acoustic tests - PN-EN-ISO 11200; ź Vibration tests - PN-EN 60068-2-6; ź Mechanical resistance tests PN-EN 60439-5; ź IP rating (degree of protection) PN-EN 60529. Cabinets are made to standards specified in the following certificates: ź ISO 9001:2008 ź ISO 14001:2004 ź EN ISO 15085-2 ź EN ISO 3834-2 Application of EU standards compliant procedures in the making of the structures as reflected in ISO certificates results in the external casing having a long life of up to 30 years as confirmed by the independent Testing Laboratory. IP55 external distribution cabinets The changeable environmental conditions affecting adversely the electronics require that casing manufacturers use corrosion resistant materials and ensure appropriate rating (IP55) providing protection against dust or liquid penetration, unauthorised entry or mechanical damage (IK10). External distribution cabinets are made of aluminium sheet metal with standard RAL7035 coating; they have a double wall (air insulation) ensuring free air flow in the space. BKT external cabinets come as a standard with: ź 3 - or 4 - point locking system (bolting), depending on the height; ź Transitional spacer base with a height of 50 mm as a middle point between the underground base and the cabinet; ź Cable glands at the cabinet bottom; ź Vertical assembly sections; ź Assembly panel in DASZ - P models; ź Earth strip; ź Assembly holders on the roof; ź Door opening stop There are two BKT external cabinet families depending on the type of fabrication. 1
IP55 external distribution cabinets Heating of cabinet via heater with thermo ventilator. 2
Outdoor distribution cabinets IP55 Outdoor distribution cabinets IP55 single wall Construction features: ź A structure consisting of a single wall made of an aluminium sheet painted to RAL7035 with paint for outdoor use; ź A door designed in the double-wall technology; ź A removable rear wall, an external and internal roof; ź A polyurethane gasket poured on the internal door panel, the rear wall and the internal roof; ź A 3-point locking system Equipment: ź Vertical 19 assembly sections one set (right and left) per each chamber ź A foam cable gland unit mounted in the floor one per each chamber ź A copper earth strip all components of the cabinet are electrically concentrated in one point for the earth strip ź A 19 1U bracket in the floor and on the side walls, e.g. for mounting a power strip ź A door stop ź A door opening sensor bracket ź A handle with insert, code 1333 ź Transport lugs in the internal roof ź TH 35 mm strips for mounting, e.g. heaters ź Plugs in the internal roof for mounting a ventilation system (fan and filtration grill) ź A punched barrier separating cabinet chambers (for two-chamber cabinets) Single-wall cabinets: Outdoor cabinet BKT 19 15U (aluminium, single-wall, single-chamber, single-door) Width Height IP degree RAL7035 800 450 885 IP55 110A1600 Outdoor cabinet BKT 19 22U (aluminium, single-wall, single-chamber, single-door) 800 450 1195 IP55 110A1601 Outdoor cabinet BKT 19 22U (aluminium, single-wall, double-chamber, double-door) 1200 450 1195 IP55 110A1602 Outdoor cabinet BKT 19 22U (aluminium, single-wall, single-chamber, single-door) 800 800 1195 IP55 110A1603 Outdoor cabinet BKT 19 22U (aluminium, single-wall, double-chamber, double-door) 1200 800 1195 IP55 110A1604 Outdoor cabinet BKT 19 30U (aluminium, single-wall, single-chamber, single-door) 800 450 1555 IP55 110A1605 Outdoor cabinet BKT 19 30U (aluminium, single-wall, double-chamber, double-door) 1200 450 1555 IP55 110A1606 Outdoor cabinet BKT 19 30U (aluminium, single-wall, single-chamber, single-door) 800 800 1555 IP55 110A1607 Outdoor cabinet BKT 19 30U (aluminium, single-wall, double-chamber, double-door) 1200 800 1555 IP55 110A1608 Outdoor cabinet BKT 19 35U (aluminium, single-wall, single-chamber, single-door) 800 800 1775 IP55 110A1609 3
Construction features: ź A structure consisting of a single wall made of an aluminium sheet painted to RAL7035 with paint for outdoor use; ź A door designed in the double-wall technology; ź A removable rear wall, an external and internal roof; ź A polyurethane gasket poured on the internal door panel, the rear wall and the internal roof; ź A 3-point locking system; Equipment: ź Vertical 19 assembly sections one set (right and left) per each chamber ź A foam cable gland unit mounted in the floor one per each chamber ź A copper earth strip all components of the cabinet are electrically concentrated in one point for the earth strip ź A 19 1U bracket in the floor and on the side walls, e.g. for mounting a power strip ź A door stop ź A door opening sensor bracket ź A handle with insert, code 1333 ź Transport lugs in the internal roof ź TH 35 mm strips for mounting, e.g. heaters ź Plugs in the internal roof for mounting a ventilation system (fan and filtration grill) ź A punched barrier separating cabinet chambers (for two-chamber cabinets) Double-wall cabinets: Outdoor distribution cabinets IP55 Outdoor distribution cabinets IP55 double wall Width Height IP degree RAL7035 Outdoor cabinet BKT 19 15U (aluminium, double-wall, single-chamber, single-door) 800 450 15U IP55 110A1500 Outdoor cabinet BKT 19 22U (aluminium, double-wall, single-chamber, single-door) 800 450 22U IP55 110A1501 Outdoor cabinet BKT 19 22U (aluminium, double-wall, double-chamber, double-door) 1200 450 22U IP55 110A1502 Outdoor cabinet BKT 19 22U (aluminium, double-wall, single-chamber, single-door) 800 800 22U IP55 110A1503 Outdoor cabinet BKT 19 22U (aluminium, double-wall, double-chamber, double-door) 1200 800 22U IP55 110A1504 Outdoor cabinet BKT 19 30U (aluminium, double-wall, single-chamber, single-door) 800 450 30U IP55 110A1505 Outdoor cabinet BKT 19 30U (aluminium, double-wall, double-chamber, double-door) 1200 450 30U IP55 110A1506 Outdoor cabinet BKT 19 30U (aluminium, double-wall, single-chamber, single-door) 800 800 30U IP55 110A1507 Outdoor cabinet BKT 19 30U (aluminium, double-wall, double-chamber, double-door) 1200 800 30U IP55 110A1508 Outdoor cabinet BKT 19 35U (aluminium, double-wall, single-chamber, single-door) 800 800 35U IP55 110A1509 4
Underground plinths for single-and double-jacket distribution cabinets For the purpose of permanent installation of an outdoor cabinet in the ground, BKT offers bases adopted to each type of a cabinet. The line of bases matches both single- and double-shell cabinets of the same outer dimensions (width/depth). Construction features: ź A structure made of a stainless steel sheet painted to RAL7035 with paint for outdoor use ź The base features 4 extendable feet for levelling the base before filling ź There is a bracket inside the base for mounting (fixing) pipes or cables led to the cabinet; the bracket corresponds to the location of the foam cable gland unit in the cabinet floor. Available models: Width Height RAL7035 Underground plinth BKT (steel-hot-dip galvanised) 800 450 15U 110A4000 Underground plinth BKT (steel-hot-dip galvanised) 800 450 22U 110A4001 Underground plinth BKT (steel-hot-dip galvanised) 1200 450 22U 110A4002 Underground plinth BKT (steel-hot-dip galvanised) 800 800 22U 110A4003 MFG outdoor telecommunications cabinets MFG series cabinets are applied when designing telecommunications networks serving as via points between a service provider and a customer. Construction features: ź A structure consists of a double-wall made of an aluminium sheet painted to RAL7038 with paint for outdoor use; ź A polyurethane gasket is poured on the internal door panel; ź A 3-point locking system; ź A removable internal roof for mounting, e.g. air-air heat exchangers or a ventilation system (fan and ventilation grill); ź A punched barrier separating cabinet chambers (for MFG12 and MFG18 cabinets); ź A battery compartment is located under the chambers. Available models: BKT MFG 19" outdoor cabinet type 8, 22U (single-chamber, single-door) Width Height IP degree RAL7038 1000 500 1500 IP55 110A8000 BKT MFG 19" outdoor cabinet type 12, 22U (double-chamber, double-door) 1300 500 1500 IP55 110A8001 BKT MFG 19" outdoor cabinet type 18, 22U (triple- chamber, triple-door) 2000 500 1500 IP55 110A8002 5
Positioning of outdoor telecommunications cabinet type MFG IP55 A series of bases provided for MFG cabinets serving as a perfect component for their permanent installation in the ground. Each MFG series cabinet has its corresponding base of a specific size. Construction features: ź A structure made of a stainless steel sheet painted to RAL7038 with paint for outdoor use; ź The base features 4 extendable feet for levelling the base before filling; ź There is a bracket inside the base for mounting (fixing) pipes or cables led to the cabinet and a space provided for connection of an earthing conductor. Available models: Width Height RAL7038 BKT underground plinth for MFG cabinet type 8 1000 500 ok.700 110A8100 BKT underground plinth for MFG cabinet type 12 1300 500 ok.700 110A8101 BKT underground plinth for MFG cabinet type 18 800 500 ok.700 110A8102 Heating and cooling systems for external and internal distribution cabinets Environmental conditions have a significant influence on the operation of devices installed in the cabinet. Therefore, BKT offers ventilation systems, air conditioners and heaters necessary to heat the cabinet chamber in colder periods and to cool the devices down (in periods of increased temperatures) to a safe temperature, i.e. to the max operating temperature of a given device specified in technical documentation of the product, depending on total power losses of these devices. The cooling system installed in the cabinet is intended to control the rotation speed of the fans in an intelligent way with respect to variable temperatures inside the cabinet. The rotation speed of the fans can be programmed depending on the preset temperature in the cabinet. A variable rotation speed contributes also to lower energy consumption and reduces a noise emission within the cabinet. The system consists of the following components: ź 48VDC fan, pumped air capacity of 350m³/h 2 pcs ź Power pack 230V/48VDC pc ź Fan operation controller with temperature sensor - pc ź Aluminium mounting elements for the fans ź Aluminium grills with filter mats ź Cable bundles for system connection and mounting screws When ordering the above ventilation system, specify the model of a cabinet in which it will be installed. : 10352125 : 10352119 Thermostat BKT TRT-10A230VAC-NO, -10 C/+80 C for fans Thermostat BKT TRT-10A230V-NC, -10 C/+80 C for heaters Cooling system two fans : 110A9300 : 10352167 : 10352148 Fan with a filter BKT RAL7032 FPF08KR230BE-110 Hygrotherm BKT ETF 012 (6A, 250V-NC, 0 C/60 C) Heater BKT 400 CSL-028-400W/230VAC 6
Heating and cooling systems for external and internal distribution cabinets Available models: Air conditioner BKT EMO04 (230V, 50-60Hz, 380W) IP54 - side Air conditioner BKT EMO06 (230V, 50-60Hz, 640W) IP54 - side Air conditioner BKT EMO08 (230V, 50-60Hz, 820W) IP54 - side Air conditioner BKT EMO10 (230V, 50-60Hz, 1000W) IP54 - side Air conditioner BKT EMO12 (230V, 50-60Hz, 1250W) IP54 - side Air conditioner BKT EMO16 (230V, 50-60Hz, 1600W) IP54 - side Air conditioner BKT EMO20 (230V, 50-60Hz, 2000W) IP54 - side Air conditioner BKT EMO30 (230V, 50-60Hz, 2900W) IP54 - side Air conditioner BKT EMO40 (230V, 50-60Hz, 3850W) IP54 - side Air conditioner BKT EMO60 (400V, 3~50Hz, 5800W) IP54 - side Air conditioner BKT EMO80 (400V, 3~50Hz, 7600W) IP54 - side Air conditioner BKTEMOA0 (400V, 3~50Hz, 9400W) IP54 - side Width 285 180 Height Weight (kg) Cooling power (W) Noise level (db) 460 17 380 60 110A9100 316 212 606 21 640 65 110A9101 348 215 783 27 820 65 110A9103 348 215 783 28 1000 65 110A9105 405 237 999 38 1250 65 110A9107 405 237 999 40 1600 65 110A9109 406 237 999 52 2000 65 110A9111 500 336 1270 80 2900 70 110A9113 500 336 1270 82 3850 70 110A9115 600 380 2000 150 5800 72 110A9117 800 380 2000 160 7600 75 110A9119 800 380 2000 180 9400 77 110A9121 Working temperature range for external air conditioners: -20 C - 55 C, air conditioners available in RAL7035 7
Internal industrial cabinets IP54, accessories BKT-IP54 Expected operating conditions of devices make manufacturers of enclosures increase technological and performance requirements. Indoor BKT IP54 industrial cabinets were designed to firmly secure their internal equipment. In many cases, locations of the cabinets arranged by the designers include very dusty places and production halls with unfavourable operating conditions which affect electronic components. Wherever it is not possible to air-condition rooms or install volume extinguishing systems, e.g. in historical sites the conditions are imposed by a restorer indoor BKT industrial cabinets of IP55 protection degree fit perfectly. With their tightness performance of IP55, it is possible to install air-conditioners and extinguishers which form a perfect product protecting equipment mounted in it. It is a cost-efficient solution meeting customers demands. Standard equipment of 32U and 42U cabinets ź Two sets of 19 42U mounting profiles ź Removable sectional floor with a foam-sealed cable penetration ź Three-point lock ź Handles with inserts, code 1333 ź One side wall included (second wall: optional accessory) ź 100mm tall pedestal with knock-out cable penetration blanks ź Max. static load : 1500kg ź Left or right-hand door installation with cabinet installation in rows ź Roof with blanc for a foam-sealed cable penetration and lifting lug installation ź Door opening angle: ca. 270 ź All parts electrically bonded Structural features of 32U and 42U cabinets ź Galvanised steel sheet ź Steel section frame ź Metal sheet/glass front/back door ź Two component polyurethane gasket (hot melt foamed-in-place) ź RAL7035 colour ź IP54 protection degree Available models 42U door front/rear: metal sheet BKT industrial rack cabinet, 19 42U BKT industrial rack cabinet, 19 42U BKT industrial rack cabinet, 19 42U BKT industrial rack cabinet, 19 42U BKT industrial rack cabinet, 19 42U BKT industrial rack cabinet, 19 42U Width 600 600 600 800 600 1000 800 600 Height IP degree RAL7035 2086 IP54 110A2610 2086 IP54 110A2611 2086 IP54 110A2612 2086 IP54 110A2613 800 800 2086 IP54 110A2614 800 1000 2086 IP54 110A2615 Available models 42U door front/rear: metal BKT industrial rack cabinet, 19 42U BKT industrial rack cabinet, 19 42U BKT industrial rack cabinet, 19 42U BKT industrial rack cabinet, 19 42U BKT industrial rack cabinet, 19 42U BKT industrial rack cabinet, 19 42U Width 600 600 600 800 600 1000 800 600 Height IP degree RAL7035 2086 IP54 110A2710 2086 IP54 110A2711 2086 IP54 110A2712 2086 IP54 110A2713 800 800 2086 IP54 110A2714 800 1000 2086 IP54 110A2715 Available models of walls for cabinets 42U Side wall for industrial cabinet BKT 42U, with mounting screws Side wall for industrial cabinet BKT 42U, with mounting screws Side wall for industrial cabinet BKT 42U, with mounting screws 600 800 1000 RAL7035 110A5244 110A5245 110A5246 8
Internal industrial cabinets IP54, accessories Available models 32U door front/rear: metal sheet/glass BKT industrial rack cabinet, 19 32U BKT industrial rack cabinet, 19 32U BKT industrial rack cabinet, 19 32U BKT industrial rack cabinet, 19 32U BKT industrial rack cabinet, 19 32U BKT industrial rack cabinet, 19 32U Width 600 600 600 800 600 1000 800 600 Height IP degree RAL7035 1641 IP54 110A2600 1641 IP54 110A2601 1641 IP54 110A2602 1641 IP54 110A2603 800 800 1641 IP54 110A2604 800 1000 1641 IP54 110A2605 Available models 32U door front/rear: metal sheet BKT industrial rack cabinet, 19 32U (front/back door: metal sheet, steel profile), without one side wall BKT industrial rack cabinet, 19 32U (front/back door: metal sheet, steel profile), without one side wall BKT industrial rack cabinet, 19 32U (front/back door: metal sheet, steel profile), without one side wall BKT industrial rack cabinet, 19 32U (front/back door: metal sheet, steel profile), without one side wall BKT industrial rack cabinet, 19 32U (front/back door: metal sheet, steel profile), without one side wall BKT industrial rack cabinet, 19 32U (front/back door: metal sheet, steel profile), without one side wall Width 600 600 600 800 600 1000 800 600 Height IP degree RAL7035 1641 IP54 110A2700 1641 IP54 110A2701 1641 IP54 110A2702 1641 IP54 110A2703 800 800 1641 IP54 110A2704 800 1000 1641 IP54 110A2705 Available models of walls for cabinets 32U Side wall for industrial cabinet BKT 32U, with mounting screws Side wall for industrial cabinet BKT 32U, with mounting screws Side wall for industrial cabinet BKT 32U, with mounting screws 600 800 1000 RAL7035 110A5241 110A5242 110A5243 As a standard, BKT indoor industrial cabinets are delivered without one wall. This results from individual needs of our customers who, in many cases, require a wall designed with special reinforcement and openings necessary to mount an air-conditioner or filtration grills with fans responsible for cooling devices installed in the cabinet. Walls for installation of an air-conditioner are customised to individual cooling demands of the cabinet. If the customer requires a cabinet without an air-conditioner, the wall needs to be ordered separately. 9
Heating and cooling systems for internal industrial cabinets As cabinets are installed in various places and with different equipment fitted inside, stable ambient conditions inside the cabinet must be ensured. For this purpose, we offer systems for heating and cooling the inside of the cabinet. The heating system consists of heaters with air flow controlled with a thermostat or hygrostat; cooling is performed with air conditioners. Air conditioners are to be selected taking into account the power of equipment fitted inside the cabinet. Make sure that the power of an air conditioner is not more than 20% of the total power of the equipment provided inside the cabinet. Available models: : 110A9300 Fan with a filter BKT RAL7032 FPF08KR230BE-110 : 10352125 : 10352119 Thermostat BKT TRT-10A230VAC-NO, -10ºC/+80ºC for fans Thermostat BKT TRT-10A230V-NC, -10ºC/+80ºC for heaters : 10352167 : 10352148 Electronic hygotherm BKT ETF 012 (6A,250V-NC, 0ºC/60ºC) Heater BKT 400 CSL-028-400W/230VAC 10
Heating and cooling systems for internal industrial cabinets Air conditioners are part of a precision cooling system. Appropriate power of an air conditioner compared to the total power loss of the equipment inside the cabinet will ensure trouble-free operation and an optimum temperature of 35 C inside the cabinet (default setting). Available models: Air conditioner BKT EGOS3 (230V, 50-60Hz, 300W) - side Air conditioner BKT EGO04 (230V, 50-60Hz, 380W) - side Air conditioner BKT EGO06 (230V, 50-60Hz, 640W) - side Air conditioner BKT EGO08 (230V, 50-60Hz, 820W) - side Air conditioner BKT EGO10 (230V, 50-60Hz, 1050W) - side Air conditioner BKT EGO12 (230V, 50-60Hz, 1250W) - side Air conditioner BKT EGO16 (230V, 50-60Hz, 1600W) - side Air conditioner BKT EGO20 (230V, 50-60Hz, 2000W) - side Air conditioner BKT EGO30 (230V, 50-60Hz, 2900W) - side Air conditioner BKT EGO40 (230V, 50-60Hz, 3850W) - side Air conditioner BKT EGO40A (400V, 3~50Hz, 3850W) - side Air conditioner BKT EGO60 (400V, 3~50Hz, 5800W) - side Air conditioner BKT EGO80 (400V, 3~50Hz, 7600W) - side Air conditioner BKT EGOA0 (400V, 3~50Hz, 9400W) - side Air conditioner BKT EGOA5 (400V, 3~50Hz, 14800W) - side Width 585 125 Height Weight (kg) Cooling power (W) Noise level (db) 340 14 300 61 110A9024 285 176 450 17 380 60 110A9000 306 209 605 21 640 65 110A9001 348 213 783 27 820 65 110A9003 348 213 783 28 1000 65 110A9005 406 237 1003 38 1250 65 110A9007 406 237 999 40 1600 65 110A9009 406 237 1003 52 2000 70 110A9011 535 335 1265 80 2900 70 110A9013 535 335 1265 82 3850 70 110A9015 535 335 1265 85 3850 70 110A9016 600 380 2000 150 5800 72 110A9017 800 380 2000 160 7600 75 110A9019 800 380 2000 180 10000 77 110A9021 800 550 2000 240 14800 67 110A9023 Working temperature range of air conditioners used for internal applications: -20 C 55 C, air conditioners available in RAL7035 11
Environmental Condition Monitoring System EC335 4DC Environmental Condition Controller The controller is designed to monitor environmental parameters (temperature, humidity, etc.) in a telecommunications cabinet or in small rooms. Its purpose is to warn users about a potential hazard and report any failures. 28 analogue sensors, 36 sensors with a potential-contact output and two signalling devices can be connected to the controller. Device characteristics and technical parameters Hardware Analogous inputs Potential-free inputs Outputs 4 inputs (RJ12 sockets) for specific analogous sensors. Any combination of 4 sensors can be connected to the device. Some sensors can be connected in stacks. The type of a sensor is detected automatically. 4 inputs (removable terminal strip) for any sensors with output and potential-free contacts. 2 voltage outputs (removable terminal strip) 12V/250mA Software Operating system Configuration Supported protocols Alarm notifications Functionality Linux Through a web interface HTTP, HTTPS, PING, DHCP, RADIUS, SYSLOG, FTP, SNTP, SMTP, SNMP (v1,v2,v3) Email, SNMP trap, SMS (optionally) See tables below CAN connector Connector for up to 8 extension modules for additional EA321 analogous inputs and additional EE322 potential-free inputs Other connectors Other Power supply 10/100Mbps Ethernet port (RJ45 socket) USB 2.0 port (Mini-B socket) Optional card of a GSM module External plug adapter 12V/1A, power consumption 10W Dimensions 180x80x33 (width x depth x height) Operating conditions Temperature: 0 C - 60 C Humidity: 0% - 90% RH (no condensation) Weight 400g Basic functionality ź Automatic sensor presence and type detection ź Adjustable logic functions ź Monitoring of conditions of other devices in a network through PING, SNMP Get protocols ź Access to a limited history of measurement values ź Loading an object map for the device ź 4 alarm thresholds for the sensor ź SMS, email, SNMP Trap notofications ź Support for a USB camera (e.g. Logitech C210) for remote monitoring of IT infrasturcture ź Creating users of different access rights ź Visualisation of device status from external software, e.g. SM4DC : 122EC003350 Analogue sensors Type Description ES350 Temperature sensor Measurement range: -10 C - +100 C Dimensions: 60x18x18 Maximum length of a connection cable: 100m ES351 Humidity sensor Measurement range: 10% - 95% RH Dimensions: 60x18x18 Maximum length of a connection cable: 50m ES352 Voltage sensor 230V AC Measurement range: 90VAC - 250VAC Dimensions: 63x66x30 Maximum length of a connection cable: 100m ES353 Door sensor (reed relay + magnet) Possible stack connection of up to 10 sensors Dimensions: 60x18x18 Maximum length of a connection cable: 150m 122ES003500 122ES003510 122ES003520 122ES003530 12
Environmental Condition Monitoring System EC335 4DC Environmental Condition Controller Analogue sensors Type Description ES354 Vibration sensor Possible stack connection of up to 10 sensors Dimensions: 60x18x18 Maximum length of a connection cable: 150m ES356 Optical smoke sensor Possible stack connection of up to 10 sensors Dimensions: 100x45 Maximum length of a connection cable: 150m ES357 Passive infrared sensor Movement detection range: 100 x 12m Dimensions: 105x57x40 Maximum length of a connection cable: 50m ES358 External temperature sensor Measurement range: -40 C - +100 C Dimensions: 7x30 + 15m cable Maximum length of a connection cable: 100m ES359 Flood sensor Detection delay: 1s Dimensions: 60x18x18 Maximum length of a connection cable: 100m ES360 Flood sensor for a water detection cable For connection of an ES361 water detection cable Dimensions: 60x18x18 Maximum length of a connection cable: 100m ES361 - Sensor detecting water and other conductive liquids An ES360 sensor is required for connection Dimensions: 60x18x18 Available lengths: 6m, 10m, 25m, 50m ES362-4-20mA sensor Any sensors with 4-20mA output can be connected to the controller Galvanic insulation 1kV between the input and output Dimensions: 60x18x18 122ES003540 122ES003560 122ES003570 122ES003580 122ES003590 122ES003600 122ES003610 122ES003620 ES363-60V DC voltage sensor Galvanic insulation 1kV between the input and output. Measurement range: 0VDC - 60VDC Dimensions: 60x18x18 122ES003630 Extension modules and accessories Type Description EE321 Extension module with additional 8 analogous inputs The module is connected to a CAN controller connector. The controller supports up to 28 analogous sensors. The module has no 19 brackets. Dimensions: 110x68x40 EE322 Extension module with additional 32 potential-free inputs The module is connected to a CAN controller connector. The controller supports up to 32 additional potential-free inputs. 19 brackets included. Dimensions: 215x40x40 EA311-1U bracket for a 19'' cabinet for EC335 4DC Dimensions: 482x44x80 122EE003210 122EE003220 122EA003110 EA315 - Light indicator Power voltage 12V, 80mA Dimensions: ɸ73x45 Flashing frequency: 1Hz EA317 - GSM modem for EC300 4DC Dimensions: 60x50x15 A modem for SMS communication operating in GSM 850/900/1800/1900 MHz networks. 122EA003150 122EA003170 13
External street distribution cabinets External street distribution cabinets are used for ICT networks and form an intermediate point between the operator and the subscriber. Such cabinets are intended for inclusion of passive copper and fibre optic elements which do not require specific ambient conditions as is the case with external distribution cabinets. Standard cabinets are equipped with the following elements: ź Assembly panel ź 19 sections (only model 11150010.1) width of 580 mm makes it possible to install 19 sections ź Retractable integrated base ź Single - point lock with a cylinder ź Removable doors facilitating assembly All cabinet made of steel sheet metal with RAL7035 powder coating. BKT-ZSD Available models: Width Height Equipment RAL7035 BKT external street distribution cabinet 480 225 1250 Assembly panel 11150001.1 BKT external street distribution cabinet 580 240 1250 Assembly panel 11150012.1 BKT external street distribution cabinet 580 240 1250 19" section 11150010.1 BKT external street distribution cabinet 780 240 1250 Assembly panel 11150020.1 BKT external street distribution cabinet 930 240 1250 Assembly panel 11150030.1 14
IP protection Classification of degrees of protection provided by enclosures (IP code) Classification of degrees of protection of electrical equipment provided by enclosures according to the standards PN-92/E-08106. Identical standards: EN 60529:1991, IEC 529:1989. Also : VDE 0470, DIN 40050, BS 5490:1977 Example of IP code: IP54 First IP number: 5 = protection from unauthorized access with the use of wire, dust protection Second IP number: 4 = protected against water sprayed from all directions First IP number Protection of device against solid objects Protection from people's access 0 no protection no protection 1 diameter > 50 mm with a hand 2 diameter > 12,5 mm with a finger 3 diameter > 2,5 mm with a tool 4 diameter > 1,0 mm with a wire 5 limited dust protection with a wire 6 dust protection with a wire Second IP number Protection of device against liquids 0 no protection 1 2 protection against vertically falling drops of water protection against falling drops of water up to 15 from the vertical 3 protected against direct sprays of water 4 protection against water sprayed from all directions 5 protected against low pressure jets of water protected against moderate pressure jets 6 of water 7 protected against temporary flooding 8 protected against the effect of immersion 9K protected against jets of water under pressure 80-100 [bar] up to +80 C according to DIN 400050 15
Outdoor FTTx Cabinets The cabinets are applied in the construction of fibre optic networks and are used as points for the execution of subscriber utility connections. Construction features: ź Cabinet made of an aluminium sheet; ź Plinth made of stainless steel (for FTTx cabinets); ź Powder painted in RAL7035; ź All the elements of the cabinet are earthed; ź Lock with a cylinder with key. Available models: Width Height RAL7035 Outdoor distribution cabinet BKT for FTTx 48xSC Simplex 317 214 1280 110A6111 Outdoor distribution cabinet BKT for FTTx for 216 fibres 317 214 1280 110A6112 Ground-standing optical distribution box 450/920/355 IP55 for 144 subscriber lines (aluminium) 450 355 920 11194930.1 16
17
System of weighing trucks on access road to cities System of weighing trucks on access road to cities 18
Bydgoszcz Industrial and Technological Park power supply distribution System of weighing trucks on access road to cities 19
Dolnośląska Broadband Network Internet Development in Poland Bydgoszcz Główna Railway Station Information totem 20
Provincial Broadband Network Internet for Mazovia Internet development in Poland System of weighing trucks on access road to cities 21
Bydgoszcz Główna Railway Station Information totem 22
Notes 23