GAS FURNACES. RGFD- SERIES Models with Input Rates from 60,000 to 120,000 BTU/HR [17.58 to kw] (All Models 92% A.F.U.E.

Similar documents
GAS FURNACES. RGFD- SERIES Models with Input Rates from 60,000 to 120,000 BTU/HR [17.58 to kw] (All Models 92% A.F.U.E.

GAS FURNACES 90 PLUS COMMUNICATING MODULATING UPFLOW GAS FURNACES EQUIPPED WITH THE COMFORT CONTROL 2 SYSTEM AND CONTOUR COMFORT CONTROL

GAS FURNACES 90 PLUS COMMUNICATING MODULATING DOWNFLOW GAS FURNACES EQUIPPED WITH THE COMFORT CONTROL 2 SYSTEM AND

Rheem Prestige Series Modulating Horizontal Gas Furnace equipped with the Comfort Control 2. System

GAS FURNACES. RGRK- SERIES Models with Input Rates 120,000 BTU/HR [35.17 kw] (All Models 90% A.F.U.E. or Above)

GAS FURNACES. Visit taxcredit for complete details.

COMFORT CONTROL 90 PLUS WITH DUAL TWO-STAGE UPFLOW GAS FURNACES

GAS FURNACES CLASSIC 90 PLUS HIGH EFFICIENCY UPFLOW GAS FURNACES

90 HIGH EFFICIENCY UPFLOW GAS FURNACES

90 HIGH EFFICIENCY UPFLOW GAS FURNACES

GAS FURNACES 90 PLUS WITH DUAL COMFORT CONTROL TWO-STAGE UPFLOW GAS FURNACES

GAS FURNACES CLASSIC 95% A.F.U.E. HIGH EFFICIENCY UPFLOW GAS FURNACES

GAS FURNACES CLASSIC 90 PLUS HIGH EFFICIENCY DOWNFLOW/ HORIZONTAL GAS FURNACES

90 HIGH EFFICIENCY UPFLOW GAS FURNACES

90 HIGH EFFICIENCY DOWNFLOW/ HORIZONTAL GAS FURNACES

Ruud Acheiver Series Upflow Gas Furnaces

FORM NO. G REV. 2 Supersedes Form No. G Rev. 1 GAS FURNACES

TZ96MDV SERIES Model with Input Rates from 60 to 100 kbtu [17.58 to kw] (All Models 95% A.F.U.E. )

Rheem Classic Series Downflow/ Horizontal Gas Furnaces

TZ95MSX SERIES Model with Input Rates from 40 to 115 kbtu [11.72 to kw] (All Models 95% A.F.U.E. )

GAS FURNACES SELECT 90 PLUS HIGH EFFICIENCY DOWNFLOW/ HORIZONTAL GAS FURNACES

90 HIGH EFFICIENCY DOWNFLOW/ HORIZONTAL GAS FURNACES

Rheem Prestige Series Communicating Two Stage Variable Speed Multi position. Gas Furnaces

TZ96MDP SERIES Model with Input Rates from 40 to 115 kbtu [11.72 to kw] (All Models 96% A.F.U.E. )

Rheem Prestige Series Communicating Two Stage Variable Speed Multi position. Gas Furnaces

Rheem Classic Plus Series Two Stage Multi position Gas Furnaces

Rheem Classic Plus Series Multi position Gas Furnaces

GAS FURNACES SILHOUETTE II PLUS 2 LXE TWO STAGE 80% A.F.U.E. UPFLOW/HORIZONTAL GAS FURNACES

GAS FURNACES. ACHIEVER SERIES SUPER QUIET 80 80% A.F.U.E. DOWNFLOW GAS FURNACES w/ecm MOTOR

FORM NO. G REV. 4 Supersedes Form No. G Rev. 3

Multi-Position Gas Furnaces

W92P- SERIES Models with Input Rates from 40 to 115 kbtu [11.72 to kw] (92% A.F.U.E. )

GAS FURNACES. Communicating Furnace Thermostat. FORM NO. G Supersedes Form No. G RHC-TST550CMMS MID HIGH

Ruud Achiever Plus Series Multi-position Gas Furnaces

Multi-Position Gas Furnaces

Series Two- Stage Multi-position Gas Furnaces. Ruud Achiever Plus. R96T- Series 96% A.F.U.E. * Input Rates from 40 to 115 kbtu [11.72 to 33.

MULTI POSITION GAS FURNACE

Rheem Classic Series Multi-position Gas Furnaces

GAS FURNACES SUPER QUIET 80 TWO STAGE 80% A.F.U.E. DOWNFLOW GAS FURNACES

MULTI POSITION GAS FURNACE

80% A.F.U.E. DOWNFLOW GAS FURNACES

Rheem Prestige Series EcoNet Enabled Modulating Upflow Gas Furnaces

Rheem Prestige Series Two-Stage Downflow Gas Furnace equipped with the Comfort Control 2. System. RGLE- Series 80% A.F.U.E. Input Rates kbtu

Rheem Prestige Series Communicating Two-Stage Variable Speed Multi-Position. Gas Furnaces

Rheem Prestige Series Communicating Two Stage Variable Speed Multi position. Gas Furnaces

90 HIGH EFFICIENCY UPFLOW GAS FURNACES

GAS FURNACES II 78% A.F.U.E. UPFLOW GAS FURNACES CRITERION

COMMUNICATING TWO-STAGE VARIABLE SPEED MULTI-POSITION GAS FURNACES

Ruud Achiever Series Multi position Gas Furnaces

Rheem Prestige Series Communicating Two-Stage Variable Speed Downflow Gas Furnace

90TJ SERIES Models with Input Rates from 45,000 to 120,000 BTU/HR [13.19 to kw] (All Models 90% A.F.U.E. or Above)

Rheem Prestige Series Communicating Two-Stage Variable Speed Upflow/Horizontal Gas Furnace

OIL FURNACES PREMIUM CLASS UPFLOW OIL FURNACES. ROBF- SERIES Heating Capacities 56,000 to 151,200 BTU/HR [16.41 to kw]

Ruud Ultra Series EcoNet Enabled Two-Stage Variable Speed Multi- Position Gas Furances

INTEGRATED HVAC & WATER HEATING

KG6RC Series TECHNICAL SPECIFICATIONS FEATURES AND BENEFITS

TECHNICAL SPECIFICATIONS

TECHNICAL SPECIFICATIONS

FG7T (C and L Series)

G6RC Series TECHNICAL SPECIFICATIONS

Hydronic Air Handler Powered by Tankless Technology

TECHNICAL SPECIFICATIONS

KG6TE Series. High Efficiency / Direct Vent or Non Direct Vent 2-Stage Condensing Gas Furnace with Variable Speed Blower TECHNICAL SPECIFICATIONS

Hydronic Air Handler Powered by Tankless Technology

TECHNICAL SPECIFICATIONS

RG7D 1-Stage Heat Series

FG6T(C,L) Series. High Efficiency / Direct Vent or Non Direct Vent 2-Stage Condensing Gas Furnace with Variable Speed Blower TECHNICAL SPECIFICATIONS

Comfort, Quality and Efficiency.

M3RL Series TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS. High Efficiency / Direct Vent Condensing Downflow Gas Furnace

For More Information Click Here or Call General Supply M7RL Series TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS

Energy Saving. Space Saving.

Rheem Classic. Series Highboy & Lowboy Oil Furnaces with PSC/Direct Drive Motor

TECHNICAL GUIDE MODELS: P*DH GAS-FIRED CONDENSING / HIGH EFFICIENCY DOWNFLOW / HORIZONTAL FURNACES 91 AFUE DESCRIPTION WARRANTY FEATURES

DM80HE. Two-Stage Convertible Multi-Speed ECM Gas Furnace 80% AFUE. Heating Input: 60, ,000 BTU/h

80% Variable Speed, Two Stage Heating Furnace. Cooling Capacity CFM in. w.c. (125 Pa)

GME8 80% AFUE. Multi-Position, TwinComfort. Heating Input: 60, ,000 BTU/h

G34M Bulletin #69/ August 2003

Hydronic Air Handler Powered by Tankless Technology

Wt. Lbs Model Number (BTUH) Hz

Model GB1AAV UPFLOW GAS FURNACE. Series G SS-GB1A-04 FEATURES

VNE GAS FURNACE 2- STAGE VARIABLE SPEED UPFLOW/HORIZONTAL

TECHNICAL GUIDE MODELS: P*UR GAS-FIRED CONDENSING / HIGH EFFICIENCY UPFLOW FURNACES 92 AFUE DESCRIPTION WARRANTY FEATURES Rev.

MERIT SERIES Downflow

G71MPP WARNING. WARNING Sharp edges. Be careful when servicing unit to avoid sharp edges which may result in personal injury. Service Literature

G I E TECHNICAL GUIDE 95.5% AFUE SINGLE STAGE RESIDENTIAL GAS FURNACES MULTI-POSITION MODELS: TG9S DESCRIPTION FEATURES WARRANTY SUMMARY

FEATURES. Gas Furnace provides the efficiency customers want with 78% Annual Fuel Utilization Efficiency (AFUE).

AIR HANDLERS AIR HANDLERS RBHP- Models featuring R-22 Refrigerant Models featuring Earth-Friendly R-410A Refrigerant

SL280DFV. DAVE LENNOX SIGNATURE COLLECTION Downflow - Two-Stage Heat - Variable Speed Blower

8+* Bulletin No November 1997

Product Data. 95% AFUE Single Stage Furnace Upflow / Downflow / Horizontal. ama ! WARNING

ELITE SERIES Downflow - High Efficiency Blower Motor

G60UH(X) WARNING. WARNING Sharp edges. Be careful when servicing unit to avoid sharp edges which may result in personal injury. Service Literature

Downflow/Horizontal Right Induced Draft Gas Furnace

XV80i. Upflow/Horizontal 80% 2-Stage, Variable Speed Gas-Fired Furnace with Whole House Air Cleaner PUB. NO

XC80 TUD2B060ACV32A TUD2B080ACV32A TUD2C080ACV42A TUD2B100ACV32A TUD2C100ACV52A TUD2D120ACV52A TUD2D140ACV52A

Upflow/ Horizontal Downflow/Horizontal Condensing, Direct Vent Gas-Fired Furnace

THERMOSTATS. 100-Series. 200-Series. 300-Series. 400-Series. 500-Series. Model Number Identification RHC TST 101 GE MS

H9MPV. 2- Stage Variable Speed 90. Flexibility. Quality. Comfort. Efficiency. Service (7/2004)

ADSH8. Two-Stage Convertible. Heating Input: 40, ,000 BTU/h

HIGH EFFICIENCY AIR HANDLER

Transcription:

FORM NO. G11-468 REV. 15 Supersedes Form No. G11-468 Rev. 14 GAS FURNACES Visit www.rheemac.com/ taxcredit for complete details. RGFD- SERIES Models with Input Rates from 60,000 to 120,000 BTU/HR [17.58 to 35.16 kw] (All Models 92% A.F.U.E. or Above) Modulating Furnace Thermostat RHC-TST412MDMS 90 PLUS MODULATING UPF GAS FURNACES WITH CONTOUR COMFORT CONTROL The Rheem Prestige Series 90 Plus High Efficiency line of upflow gas furnaces are designed for utility rooms, closets, or alcoves. Because of the low-profile 34 inch height, the RGFD- model can be used vertically to satisfy most applications that traditionally call for a horizontal furnace. The design is certified by CSA. Features Heat exchanger is constructed of all stainless steel for maximum corrosion resistance and thermal fatigue reliability. Modulating Function: when used with a modulating thermostat, modulation rate between 40% and 100% of total capacity. Two-stage Function: when used with a two-stage thermostat, furnace operates at 40% on first stage, and stages up to 65%, then 100% for second stage. Multistage Function: when used with a single-stage thermostat, furnace functions as a three stage furnace operating at 40%, 65% and 100% of total capacity. Reduced firing rates, electrically efficient ECM2+ motor, and solid doors provide the ultimate in quiet operation. Low speed constant fan. Constant temperature rise for superior comfort. Seven segment LED for system diagnostics. Diagnostic history for troubleshooting. Two-speed induced draft motor. Direct spark ignition with remote sense. Top electrical connections, left or right gas and condensate drainage connections on downflow models. Optional indoor or outdoor combustion air. All models comply with Department of Energy test procedures for 2% or less electrical efficiency ratings. A variety of cooling coils and plenums designed to use with the Prestige Series 90 Plus gas furnaces are available as optional accessories. A.F.U.E. (Annual Fuel Utilization Efficiency) calculated in accordance with Department of Energy test procedures.

PRESTIGE SERIES 90 PLUS EFFICIENCY MODULATING UPF GAS FURNACE REMOTE SENSOR IN-SHOT BURNERS DIRECT SPARK IGNITION PRIMARY AND SECONDARY HEAT EXCHANGER GAS VALVE PRESSURE SWITCHES IGNITION CONTROL INTEGRATED FURNACE CONTROL BER ASSEMBLY WITH ECM MOTOR DRAFT INDUCER STANDARD EQUIPMENT Completely assembled and wired; heat exchanger; primary: 409 and aluminized 409 stainless steel, secondary: 29-4C stainless steel; induced draft; pressure switches; redundant modulating main gas control; blower compartment door safety switch; solid state time on/off blower control; limit controls; manual shutoff valve; 100% safety lock out; cool fan off delay; one hour automatic retry; power and self-test diagnostics; flame sense current diagnostics; electronic air cleaner connections; humidifier connections; humidifier on/off delay; dehumidifier connection; low speed continuous fan option; transformer; direct drive, ECM variable speed blower motor. (Please note: a thermostat is not included as standard equipment. See Accessories ) 2 Rheem Heating, Cooling and Water Heating OPTIONAL EQUIPMENT Side and bottom filter racks; return air cabinet for all sizes. NOTE: Furnace is not listed for use with fuels other than natural or L.P. (propane) gas. All models can be converted by a qualified distributor or local service dealer to use L.P. (propane) gas without changing burners. Factory approved kits must be used to convert from natural to L.P. (propane) gas and may be ordered as optional accessories from a parts distributor. For L.P. (propane) operation, refer to Conversion Kit Index Form. Fossil Fuel Kits for use with Heat Pumps. WARNING THIS FURNACE IS NOT APPROVED OR RECOMMENDED FOR USE IN MOBILE HOMES

BEFORE PURCHASING THIS APPLIANCE, READ IMPORTANT ENERGY COST AND EFFICIENCY INFORMATION AVAILABLE FROM YOUR RETAILER. PHYSICAL DATA AND SPECIFICATIONS UPF MODELS U.S. and Canadian Models MODEL NUMBERS RGFD-06EMCK RGFD-07EMCK RGFD-09EZCM RGFD-10EZCM RGFD-12ERCM INPUT MAXIMUM (BTU/HR) [kw] 60,000 [17.58] 75,000 [21.98] 90,000 [26.38] 105,000 [30.77] 120,000 [35.17] HEATING CAPACITY MAXIMUM [kw] 55,800 [16.35] 72,000 [21.10] 86,000 [25.20] 100,000 [29.31] 115,000 [33.70] INPUT MINIMUM (BTU/HR) [kw] 24,000 [7.03] 30,000 [8.79] 36,000 [10.55] 42,000 [12.31] 48,000 [14.07] HEATING CAPACITY MINIMUM [kw] 22,560 [6.61] 28,200 [8.26] 33,840 [9.92] 39,000 [11.57] 45,120 [13.22] HEATING EXT. STATIC PRESSURE [kpa] 0.12 [.029] 0.12 [.029] 0.15 [.037] 0.20 [.049] 0.20 [.049] BER (D X W IN.) [mm] 11 x 7 [279 x 178] 11 x 7 [279 x 178] 12 x 11 [305 x 279] 12 x 11 [305 x 279] 11 x 10 [279 x 254] ECM MOTOR HP [W] 1/2 [373] 1/2 [373] 1 [746] 1 [746] 1 [746] UNIT AMPS 8.7 8.7 12.0 12.0 12.0 MAXIMUM OVERCURRENT PROTECTION 15 15 15 15 15 HEATING CFM MAXIMUM [L/s] 795 [375] 995 [470] 1195 [564] 1395 [658] 1595 [753] HEATING CFM MINIMUM [L/s] 320 [151] 430 [203] 515 [243] 600 [283] 685 [323] COOLING CFM RANGE [L/s] 600-1200 [283-566] 600-1200 [283-566] 1200-2000 [566-944] 1200-2000 [566-944] 1200-2000 [566-944] MAXIMUM EXT. STATIC PRESSURE [kpa] 0.80 [0.20] 0.80 [0.20] 0.80 [0.20] 0.80 [0.20] 0.80 [0.20] TEMPERATURE RISE RANGE F [ C] 40-70 [22.2-38.9] 40-70 [22.2-38.9] 40-70 [22.2-38.9] 40-70 [22.2-38.9] 40-70 [22.2-38.9] MAX OUTLET AIR TEMPERATURE F [ C] 170 [76.7] 180 [82.2] 180 [82.2] 180 [82.2] 180 [82.2] RETURN AIR CABINETS RXGR- C17B C17B C21B C21B C24B FILTER SIZE (IN.) [mm] BOTTOM 19 1 /4 x 25 [489 x 635] 19 1 /4 x 25 [489 x 635] 22 3 /4 x 25 [578 x 635] FILTER SIZE (IN.) [mm] SIDE APPROX. SHIPPING WEIGHT (LBS.) [kg] 127 [57.6] 133 [60.3] 158 [71.7] 162 [73.5] 170 [77.1] AFUE 93.4% 92.8% 94.1% 92.4% 92.5% MODEL IDENTIFICATION R G F D 07E M C K S Rheem Gas Furnace Modulating Prestige Series 90 Plus Gas Furnace Design Series Electric Ignition 06E 07E 09E 10E 12E Heating Input Designation Electric Ignition Nox Models 06N 07N 09N 10N Input BTU/HR 60,000 [17.6 kw] 75,000 [20.5 kw] 90,000 [26.4 kw] 105,000 [30.7 kw] 120,000 [35.2 kw] Blower Size M = 11 x 7 [279 x 178 mm] R = 11 x 10 [279 x 254 mm] Z = 12 x 11 [305 x 279 mm] Variations C = Single/ Multi Zone Heat/Cool Designation K = 600-1200 CFM [283-566 L/s] M = 1200-2000 CFM [566-944 L/s] Fuel Code S = U.S. and Canadian Natural Gas Option 278 278 = Factory Supplied High Altitude Conversion Kit Rheem Heating, Cooling and Water Heating 3

UPF MODELS MINIMUM CLEARANCE (IN.) [mm] MODEL LEFT A B C D E F RGFD- SIDE RIGHT BACK TOP FRONT VENT SIDE 06 17 1 /2 [445] 16 3 /8 [416] 15 5 /8 [397] 2 [51] 15 [422] 13 13 /16 [351] 0 0 0 1 [25] 2 [51] 0 07 17 1 /2 [445] 16 3 /8 [416] 15 5 /8 [397] 2 [51] 15 [422] 13 13 /16 [351] 0 0 0 1 [25] 2 [51] 0 09 21 [533] 19 7 /8 [505] 19 1 /8 [487] 2 [51] 18 1 /2 [511] 17 5 /16 [440] 0 0 0 1 [25] 2 [51] 0 10 21 [533] 19 7 /8 [505] 19 1 /8 [487] 2 [51] 18 1 /2 [511] 17 5 /16 [440] 0 0 0 1 [25] 2 [51] 0 12 24 1 /2 [622] 23 3 /8 [594] 22 5 /8 [575] 2 [51] 22 [600] 20 13 /16 [529] 0 0 0 1 [25] 2 [51] 0 4 Rheem Heating, Cooling and Water Heating

BER PERFORMANCE DATA RGFD MODELS MODEL RGFD- BER SIZE (D x W) IN. [mm] ECM MOTOR H.P. [W] BER SPEED CFM [L/s] AIR DELIVERY EXTERNAL STATIC PRESSURE INCHES WATER COLUMN [kpa] 0.1 [.02]-0.8 [.20] 06 11 x 7 [279 x 178] 1/2 [373] 1000 [472] 800 [378] 600 [283] 07 11 x 7 [279 x 178] 1/2 [373] 1000 [472] 800 [378] 600 [283] 09 12 x 11 [305 x 279] 1 [746] 2000 [944] 1600 [755] 1400 [661] 10 12 12 x 11 [305 x 279] 11 x 10 [279 x 254] 1 [746] 1 [746] 2000 [944] 1600 [755] 1400 [661] 2000 [944] 1600 [755] 1400 [661] GENERAL TERMS OF LIMITED WARRANTY* Rheem will furnish a replacement for any part of this product which fails in normal use and service within the applicable period stated, in accordance with the terms of the limited warranty. Primary and Secondary Heat Exchanger...Limited Lifetime Conditional Unit Replacement Warranty (Registration Required)...Limited Lifetime Conditional Parts Warranty (Registration Required)...Ten (10) Years *For Complete Details of the Limited Warranty, Including Applicable Terms and Conditions, See Your Local Installer or Contact the Manufacturer for a Copy of the Product Warranty Card. Rheem Heating, Cooling and Water Heating 5

ACCESSORIES UPF VENT TERMINATION KITS CONCENTRIC: HORIZONTAL/ VERTICAL = RXGY-E03A (US & Canadian Installations) HORIZONTAL TWO PIPE: RXGY-D02, RXGY-D03, RXGY-D04 (US Installations) RXGY-D02A, RXGY-D03A, RXGY-D04A (Canadian Installations) RXGY-G02 (US Only) CONDENSATE PUMP KIT: RXGY-B01 NEUTRALIZER KIT: RXGY-A01 RETURN AIR PLENUM: RXGR-C17B RXGR-C21B RXGR-B24B EXTERNAL BOTTOM FILTER RACK: RXGF-CB EXTERNAL SIDE FILTER RACK: RXGF-CA MODEL RGFD- 06 07 09 10 12 FILTER RACK FILTER SIZES* INCHES [mm] RXGF-CB (BOTTOM) 19 1 /4 x 25 [489 x 635] 19 1 /4 x 25 [489 x 635] 22 3 /4 x 25 [578 x 635] RXGF-CA (SIDE) *Filter racks are shipped without filters. Filters shipped with furnace may be used or a suitable 1" [25.4 mm] filter. PLENUM DATA FOR A COILS Plenum adapters are required in some instances for use on upflow applications when plenum and furnace size do not match. FURNACE WIDTH IN. [mm] PLENUM WIDTH IN. [mm] PLENUM ADAPTER UPF COIL PLENUM 17 1 /2 [445] 16 1 /4 [413] RXAA-C185 RXAL-B16BU 17 1 /2 [445] 20 1 /4 [514] RXAA-C173 RXAL-B20BU 17 1 /2 [445] 21 5 /8 [549] RXAA-C187 RXAL-B21BU 17 1 /2 [445] 25 1 /4 [641] RXAA-C174 RXAL-B25BU 21 [533] 25 1 /4 [641] RXAA-C175 RXAL-B25BU 21 [533] 22 1 /4 [565] RXAA-C176 RXAL-B22BU 21 [533] 21 5 /8 [549] RXAA-C188 RXAL-B21BU 24 1 /2 [622] 25 1 /4 [641] RXAA-C177 RXAL-B25BU 24 1 /2 [622] 21 5 /8 [549] RXAA-C187 RXAL-B21BU Note: See Form Number C11-206 for MultiFlex coil data. THERMOSTATS RECOMMENDED MODULATING FURNACE THERMOSTAT RHC-TST412MDMS 7 Day 5/1/1 Programmable Modulating/Two Cool Hardwired Works in Modulating Furnace and Modulating Furnace Dual Fuel applications (requires optional external sensor) Bright, 12 sq. inch touchscreen display Keypad lockout option Hardwired Easy, menu-driven programming Audio prompting to ensure program change confirmation Intuitive red/blue temperature keys Large, easy-to-see characters Available only through professional contractors FOSSIL FUEL KIT RXPF-F02 *PROGRAMMABLE THERMOSTAT ACCESSORIES: Adapter Plate = F61-2600 Remote F1451328 and F1451378 Sensor *Available through PROSTOCK. LP KIT: (Available through PROSTOCK ) U.S./Canadian = RXGJ-FP07 6 Rheem Heating, Cooling and Water Heating

ACCESSORIES UPF (con t.) FOR ALTITUDES: MODEL -GFD RGFD ALTITUDE CONVERSION KITS INPUT (BTU) 06 60,000 [17.58] KIT NO. RXGY-F06 07 75,000 [21.98] RXGY-F07 09 90,000 [26.37] 10 105,000 [30.77] 12 120,000 [35.16] RXGY-F06 RXGY-F05 RXGY-F05 *For installations over 5000 ft. OPTION CODE FOR ALTITUDE: US & Canada 278 NOTE: High altitude kits and options do NOT include additional burner orifices. If a burner orifice change is necessary, they must be ordered through PROSTOCK. See Installation Instructions for more information. Option 278 furnaces are shipped with #51 DMS orifices installed. This is one drill size smaller than standard furnaces to account for expected average elevations and heating values typically seen in these areas. CAUTION: Always follow National Fuel Gas Code (NFGC) guidelines when converting furnaces for high altitudes. For all installations above 2000 ft. (including all option 278 models), the burner orifice size needs to be recalculated and verified at elevations above 2000 ft. A burner orifice change may still be required. See Installation Instructions for more information. Manifold gas pressure reduction methods to adjust for altitude may NOT be used on these models. The only method permitted on modulating furnace models is to recalculate the burner orifice size. See Installation Instructions for more information. Rheem Heating, Cooling and Water Heating 7

Before proceeding with installation, refer to installation instructions packaged with each model, as well as complying with all Federal, State, Provincial, and Local codes, regulations, and practices. Rheem Heating, Cooling and Water Heating P.O. Box 17010, Fort Smith, AR 72917 In keeping with its policy of continuous progress and product improvement, Rheem reserves the right to make changes without notice. PRINTED IN U.S.A. 5-09 DC FORM NO. G11-468 REV. 15 Supersedes Form No. G11-468 Rev. 14