Mauritian Standards/Amendments Published in 2013 Reference Title 2013 Notice No. Date Gazetted 2013 1 R MS 200:2013 Energy efficiency and labelling requirements Household room air conditioners 2 MS 207:2013 Energy efficiency and labelling requirements Household tumble driers 3 MS EN 1147:2010 Portable ladders for fire service use 4 R MS ISO 3864- Graphical symbols Safety colours and safety signs Part 1: Design principles for safety signs and safety markings 5 R MS ISO 15189:2012 Medical laboratories Requirements for quality and competence 6 MS ISO/IEC TS 17021-2:2012 7 MS ISO/IEC 17065:2012 Conformity assessment Requirements for bodies providing audit and certification of management Part 2: Competence requirements for auditing and certification of environmental management Conformity assessment Requirements for bodies certifying products, processes and services 8 MS ISO 22300:2012 Societal security -- Terminology 9 MS ISO 22301:2012 Societal security -- Business continuity management --- Requirements 10 MS ISO 22313:2012 Societal security Business continuity management Guidance 11 MS IEC 60335-2-11:2008 Household and similar electrical appliances - Safety - Part 2-11: Particular requirements for tumble dryers 12 MS ISO 361:1975 Basic ionizing radiation symbol 13 MS ISO 2919:2012 Radiological protection -- Sealed radioactive sources - General requirements and classification 14 R MS ISO 3758: 2012 Textiles Care labelling code using symbols 15 MS ISO 9978:1992 Radiation protection - Sealed radioactive sources - Leakage test methods 16 MS ISO 17088:2012 Specifications for compostable plastics 17 MS ISO 18589-1:2005 18 MS ISO 18589-2:2007 19 R MS ISO 20344: 2011 Measurement of radioactivity in the environment - Soil - Part 1: General guidelines and definitions Measurement of radioactivity in the environment -- Soil -- Part 2: Guidance for the selection of the sampling strategy, sampling and pre-treatment of samples Personal protective equipment Test methods for footwear 1
25 MS ISO 81060-2:2009 +Tech corrigendum 26 MS ISO/IEC 2382-20 R MS ISO 20345: Personal protective equipment Safety 2011 footwear 21 R MS ISO 20347: Personal protective equipment Occupational 2012 footwear 22 MS ISO 21482:2007 Ionizing-radiation warning -- Supplementary symbol 23 MS ISO 22311: 2012 Societal security- Video surveillance Export interoperability 24 MS ISO 81060- Non-invasive sphygmomanometers Part 1: 1:2007 Requirements and test methods for nonautomated measurement type Non-invasive sphygmomanometers - Part 2: Clinical validation of automated measurement type Information technology -- Vocabulary -- Part 8: 8:1998 Security 27 MS ISO/IEC 27013:2012 Guidance on the integrated implementation of ISO/IEC 27001 and ISO/IEC 20000-1 28 MS ISO/IEC 27032:2012 Guidelines for cybersecurity 29 MS ISO/IEC 27034- Information technology Security techniques Application security Part 1: Overview and concepts 30 MS ISO/IEC 27037:2012 Guidelines for identification, collection, acquisition and preservation of digital evidence 31 MS IEC Crystalline silicon terrestrial photovoltaic (PV) 61215:2005 modules Design qualification and type approval 32 MS IEC Thin-film terrestrial photovoltaic (PV) modules 61646:2008 Design qualification and type approval 33 MS IEC 61702:1995 Rating of direct coupled photovoltaic (PV) pumping 34 MS IEC 61724:1998, Photovoltaic system performance monitoring Guidelines for measurement, data exchange and analysis 35 MS IEC 61730-1:2004 + A 36 MS IEC 61730-2:2012 37 MS IEC 62108:2007 Photovoltaic (PV) module safety qualification Part 1: Requirements for construction Photovoltaic (PV) module safety qualification Part 2: Requirements for testing Concentrating photovoltaic (CPV) modules and assemblies - Design qualification and type approval 38 MS IEC 62116:2008 Test procedure of islanding prevention measures for utility-interconnected photovoltaic inverters 39 MS IEC 62124:2004 Photovoltaic Stand-alone Design verification 40 MS IEC 62446:2009 Grid connected photovoltaic - Minimum requirements for system documentation, commissioning tests and inspection 41 MS IEC PVRS 11A + A:1:2009 Portable solar photovoltaic (PV) lanterns Design qualification and type approval 42 MS EN 837-3:1996 Pressure gauges - Part 3: Diaphragm and capsule pressure gauges - Dimensions, metrology, requirements and testing 2
43 MS EN 1060-3:1997 + A 2:2009 Non-invasive sphygmomanometers Part 3: Supplementary requirements for electromechanical blood pressure measuring 44 MS EN 1060-4:2004 Non-invasive sphygmomanometers Part 4: Test procedures to determine the overall system accuracy of automated non-evasive sphygmomanometers 45 MS EN 16247-1:2012 Energy audits - Part 1: General requirements 46 MS 182:2013 Technical standard for limited payout machine 47 A 48 Amd 1:2013 to MS 1- MS EN 12811-1:2003 The National Flag - Part 1-Specifications Temporary works equipment Part 1: Scaffolds Performance requirements and general design 49 MS ISO 10004:2012 Quality management Customer satisfaction Guidelines for monitoring and measuring 50 MS ISO 10018:2012 Quality management Guidelines on people involvement and competence 51 MS IEC 61386-1:2008 52 MS IEC 61386-21:2002 53 MS IEC 61386-22:2002 54 MS IEC 61386-23:2002 55 MS IEC 61386-24:2004 56 MS IEC 61386-25:2011 57 R MS EN 420:2003 + A1:2009 incorporating Corrigendum November 2006 58 R MS EN 659:2003 + A1:2008 incorporating Corrigendum 2009 1: General requirements 21: Particular requirements Rigid conduit 22: Particular requirements Pliable conduit 23: Particular requirements Flexible conduit 24: Particular requirements Conduit buried underground 25: Particular requirements Conduit fixing devices Protective gloves General requirements and test methods Protective gloves for firefighters 59 R MS ISO 14040:2006 Environment management Life cycle assessment Principles and framework 3
60 MS ISO 14044:2006 Environment management - Life cycle assessment Requirements and guidelines 61 MS ISO/TS 14033:2012 62 MS ISO/TR 14047:2012 63 MS ISO/TR 14049:2012 64 MS EN 50525-65 MS EN 50525-2-1 66 MS EN 50525-2-12:2011 67 MS EN 50525-2- 2 68 MS EN 50525-2- 3 69 MS EN 50525-2- 5 70 MS EN 50525-2- 7 71 MS EN 50525-2- 83:2011 Environmental management -- Quantitative environmental information -- Guidelines and examples Environmental management -- Life cycle assessment -- Illustrative examples on how to apply ISO 14044 to impact assessment situations Environmental management -- Life cycle assessment -- Illustrative examples on how to apply ISO 14044 to goal and scope definition and inventory analysis (U 0 /U) Part 1: General requirements rated voltages up to and including 450/750V (U 0 /U) Part 2-11: Cables for general applications - Flexible cables with thermoplastic PVC insulation (U 0 /U) Part 2-12: Cables for general applications - Cables with thermoplastic PVC insulation for extensible leads (U 0 /U) Part 2-21: Cables for general applications - Flexible cables with crosslinked elastomeric insulation (U 0 /U) Part 2 31: Cables for general applications - Single core non-sheathed cables with thermoplastic PVC insulation (U 0 /U) Part 2 51: Cables for general applications - Oil resistant control cables with thermoplastic PVC insulation (U 0 /U) Part 2 71: Cables for general applications - Flat tinsel cables (cords) with thermoplastic PVC insulation (U 0 /U) Part 2 83: Cables for general applications - Multicore cables with crosslinked silicone rubber insulation 4
72 MS EN 50525-3- 2 73 MS EN 50525-3- 4 (U 0 /U) Part 3 21: Cables with special fire performance - Flexible cables with halogen-free crosslinked insulation, and low emission of smoke (U 0 /U) Part 3 41: Cables with special fire performance - Single core non-sheathed cables with halogen-free crosslinked insulation, and low emission of smoke 74 MS ISO 39001:2012 Road traffic safety (RTS) management - Requirements with guidance for use 75 MS ISO 14470:2011 Food irradiation Requirements for the development, validation and routine control of the process of irradiation using ionizing radiation for the treatment of food 76 R 77 R 78 79 80 R 81 MS 148-1:2013 1:1995+A4:2012) MS 148-2:2013 2:1995+A4:2012) MS 148-4:2013 4:1995+A4:2012) MS 148-5:2013 5:2008) MS 173:2013 (BS 7889:2012) MS ISO 20349:2010 82 MS EN 14682:2007 83 connection units Part 1: Specification for rewirable and non-rewirable 13 A fused plugs connection units Part 2: Specification for 13 A switched and unswitched socket-outlets connection units Part 4: Specification for 13 A fused connection units switched and unswitched connection units Part 5: Specification for fused conversion plugs Electric cables Thermosetting insulated, nonarmoured cables with a voltage of 600/1 000 V, for fixed installations Personal protective equipment Footwear protecting against thermal risks and molten metal splashes as found in foundries and welding Requirements and test method Safety of children s clothing Cords and drawstrings on children s clothing Specifications MS ISO 10008:2013 Quality management -- Customer satisfaction -- Guidelines for business-to-consumer electronic commerce transactions 2033 31 August R Revised standards 5