Submittal Prepared For: All Bidders Sold To: Date: January 8, 209 Customer P.O. Customer Project Job Job Name: City of Carrollton Fire Splits 623 Beltline Road CARROLLTON, TX 75006 Trane U.S. Inc. dba Trane is pleased to provide the enclosed submittal for your review and approval. Product Summary Qty Product 4 Split System Air Conditioning Units (Small) The attached information describes the equipment we propose to furnish for this project, and is submitted for your approval. Scott Sherbit Trane 67 HUTTON DRIVE Carrollton, TX 750068336 Phone: (469) 7583077 Product performance and submittal data is valid for a period of 6 months from the date of submittal generation. If six months or more has elapsed between submittal generation and equipment release, the product performance and submittal data will need to be verified. It is the customer s responsibility to obtain such verification. Table of Contents Product Summary... Split System Air Conditioning Units (Small) (Items A A3) Tag Data... 2 Product Data... 2 Mechanical Specifications... 4 Unit Dimensions... 6 J:\JOBS\63\320936\2\City of Carrollton Fire Splits submittal.doc
Item Tag(s) Qty Description Model Number A No Tag Kitchen 4TTR4060L0000 S8XC00M5PSA 4TXCC009DS3HC A2 No Tag 2 Dorm Area, Toilet Area 4TTR4036L0000 S8XB060M3PSA 4TXCB004DS3HC A3 No Tag Workout 4TTR408L0000 S8XA026M2PSA 4TXCA002DS3HC Product Data Split System Air Conditioning Units (Small) Item: A Qty: Split System Cooling Outdoor Unit 5 Ton Nominal Cooling Capacity 200 230 Volt Phase 60 Hertz Single Stage Gas NonCond. 2" Wide 00,000 Heating input BTUH 4Way (Upflow/Horz Left/Right, Downflow) 5 Ton Capacity Permanent split capacitor Two Speed Standard 24 Volt Major Design Squence A Cased upflow/dnflow/horiz left 2.0"/9.8" cabinet Brazed 60,000 Nominal cooling capacity Hi efficiency TXVNon bleed Convupflow/dnflw,left airflow coil st Year labor warranty Item: A2 Qty: 2 Split System Cooling Outdoor Unit 3 Ton Nominal Cooling Capacity 200 230 Volt Phase 60 Hertz Single Stage Gas NonCond. 7.5" Wide 60,000 Heating input BTUH 4Way (Upflow/Horz Left/Right, Downflow) 3 Ton Capacity Permanent split capacitor Two Speed Standard 24 Volt Major Design Squence A Cased upflow/dnflow/horiz left 7.5"/6.3"cabinet Brazed 36,000 Nominal cooling capacity Hi efficiency TXVNon bleed Convupflow/dnflw,left airflow coil st Year labor warranty Item: A3 Qty: Split System Cooling Outdoor Unit.5 Ton Nominal Cooling Capacity 200 230 Volt Phase 60 Hertz Single Stage Gas NonCond. 4.5" Wide 26,000 Heating input BTUH 4Way (Upflow/Horz Left/Right, Downflow) 2 Ton Capacity Permanent split capacitor Two Speed Equipment Submittal Page 2 of 6
Standard 24 Volt Major Design Squence A Cased upflow/dnflow/horiz left 4.5" /3.3"cabinet Brazed 24,000 Nominal cooling capacity Hi efficiency TXVNon bleed Convupflow/dnflw,left airflow coil st Year labor warranty Equipment Submittal Page 3 of 6
Mechanical Specifications Split System Air Conditioning Units (Small) Item: A A3 Qty: 4 4TXC General Upflow, Downflow, or Horizontal coils shall be designed for cooling and heat pump applications. The coil shall be 3/8" seamless aluminum tubing me chanically bonded to aluminum plate fin. Refrigerant for the TXC coils shall be controlled with factory installed NonBleed TXV refrigerant control. Refrigerant connections are brazed fittings with an additional Schrader Valve for system service. The coil cabinet shall have a removable front and interior access panel for evaporator coil entering air surface cleaning. The coil includes a drain pan with drain connections for vertical or horizontal operation and a horizontal auxiliary drain pan. These coils are A.R.I. certified with Trane's matching condensing units. 4TXC Accessories Evaporator Defrost Control installed on coil for lower ambient operating conditions. 4TTR4 General The Outdoor Units are fully charged from the factory for up to 5 feet of piping. This unit is designed to operate at outdoor ambient temperatures as high as 5F. Cooling capacities are matched with a wide selection of air handlers and furnace coils that are AHRI certified. The unit is certified to UL 995. Exterior is designed for outdoor application. 4TTR4 Casing Unit casing is constructed of heavy gauge, G60 galvanized steel and painted with a weather resistant powder paint on all louvered panels and prepaint on all other panels. Corrosion and weatherproof CMBPG30 base. 4TTR4 Refrigerant Controls Refrigeration system controls include condenser fan, compressor contactor and high pressure switch. High and low pressure controls are inherent to the compressor. A factory supplied liquid line drier is standard. Some models may require field installation. 4TTR4 Compressor The compressor features internal over temperature, pressure protection and total dipped hermetic motor. Other features include: Centrifugal oil pump and low vibration and noise. 4TTR4 Condenser Coil The outdoor coil provides low airflow resistance and efficient heat transfer. The coil is protected on all four sides by louvered panels. 4TTR4 Low Ambient Cooling As manufactured, this system has a cooling capacity to 55F. The addition of an evaporator defrost control permits operation to 40F. The addition of an evaporator defrost control with TXV permits low ambient cooling to 30F. S8X GENERAL OPERATION The SSeries furnace utilizes a Silicon Nitride Hot Surface Ignition system, which eliminates the waste of a constant burning pilot. The integrated system control lights the main burners upon a demand for heat from the room thermostat. Complete front service access. a. Low energy power venter b. Vent proving pressure switches. S8X NATURAL GAS MODELS Central Heating furnace designs are certified by Intertek for both natural and L.P. gas. Limit setting and rating data were established and approved under standard rating conditions using American National Standards Institute standards. S8X SAFE OPERATION The Integrated System Control is a solid state device which continuously monitors for presence of flame when the system is in the heating mode of operation. Dual solenoid combination gas valve and regulator provide additional safety. S8X QUICK HEATING Durable, cycle tested, heavy gauge tubular aluminized steel heat exchanger quickly transfers heat to provide warm conditioned air to the structure. Low energy power vent blower, to increase efficiency and provide a discharge of gas fumes to the outside. Equipment Submittal Page 4 of 6
S8X BURNERS Multiport, Inshot burners will give years of quiet and efficient service. All models can be converted to L.P. gas with LP conversion kit. S8X INTEGRATED SYSTEM CONTROL Exclusively designed operational program provides total control of furnace limit sensors, blowers, gas valve, flame control and includes self diagnostics for ease of service. S8X ENERGY EFFICIENT OPERATION AirTite? cabinet design is certified to <% air leakage per ASHRAE 93?Method of Test for Determining the Airtightness of HVAC Equipment.? S8X AIR DELIVERY The 9 speed constant torque blower motor has sufficient airflow for most heating and cooling requirements and will switch from heating to cooling speeds on demand from room thermostat. S8X STYLING Heavy gauge steel and "wraparound" cabinet construction is used in the cabinet with bakedon enamel finish for strength and beauty. Every orientation has at least two venting options. There are no knockouts on cabinet. Equipment Submittal Page 5 of 6
Item: A Qty: 37 /4" UNIT DIMENSTIONS DIM D 7/8" DIM E 3/8" SERVICE PANEL SEE NOTE 2 34 /4" NOTES. TOP DISCHARGE AREA SHOULD BE UNRESTRICTED FOR AT LEAST 60" ABOVE UNIT. UNIT SHOULD BE PLACED SO ROOF RUNOFF WATER DOES NOT POUR DIRECTLY ON UNIT, AND SHOULD BE AT LEAST 2" FROM WALL AND ALL SURROUNDING SHRUBBERY ON TWO SIDES. OTHER TWO SIDES UNRESTRICTED. 2. ELECTRICAL AND REFRIGERANT COMPONENT CLEARANCES PER PREVAILING CODES. " ELECTRICAL SERVICE PANEL 7/8" DIA. HOLE LOW VOLTAGE 20" /8" DIA. K.O. WITH 7/8" DIA. HOLE IN CONTROL BOX BOTTOM FOR ELECTRICAL POWER SUPPLY " 37 /8" LIQUID LINE SERVICE VALVE, "E" I.D. FEMALE BRAZE 8 5/8" 6" 8 5/8" 6" LIQUID LINE SERVICE VALVE, "E" I.D. FEMALE BRAZE 3 3/8" 3 7/8" GAS LINE /4" TURN BALL SERVICE VALVE, "D" I.D. FEMALE BRAZED 3 3/8" 3 7/8" GAS LINE SERVICE VALVE, "D" I.D. FEMALE BRAZED Equipment Submittal Page 6 of 6
Item: A Qty: ELECTRICAL / GENERAL DATA GENERAL Model: Voltage: Unit Hertz: Unit POWER CONN. 4TTR4060 Minimum Circuit Ampacity: 3.0 208 230 60 Maximum Circuit Breaker: Minimum Protection Rating: 50.0 50.0 COMPRESSOR Rated Load Amps: Locked Rotor Amps: 23.7 52.5 OUTDOOR MOTOR Horsepower: Motor Speed (RPM): Full Load Amps: Locked Rotor Amps: 0.20 0.95 NOTES:. Certified in accordance with the Unitary AirConditioner equipment certification program which is based on AHRI Standard 20/240. 2. Calculated in accordance with N.E.C. Use only HACR circuit breakers or fuses. 3. Standard line lengths 60'. Standard lift 60' Suction and Liquid line. For Greater lengths and lifts refer to refrigerant piping software Pub# 323320 4. * = 5, 20, 25, 30, 40 and 50 foot lineset available. REFRIGERANT Charge: Line Size O.D. Gas: Line Size O.D. LIQ: R40 7.6 lb 7/8" 3/8" NET SHIPPING WEIGHT 2.0 lb 246.0 lb NOTES: C. TOP DISCHARGE SHOULD BE UNRESTRICTED FOR AT LEAST 60" ABOVE UNIT C2. PLACE UNIT FROM WALL C3. PLACE SHRUBBERY AT LEAST 2" FROM UNIT ON TWO SIDES, OTHER SIDES UNRESTRICTED C4. PLACE UNIT SO ROOF RUNOFF DOES NOT FALL DIRECTLY ON UNIT C DISCHARGE C4 C3 C2 C3 WEIGHT AND CLEARANCE Equipment Submittal Page 7 of 6
Item: A Qty: A 4 7/6" DUCT FLANGE SCHRADER VALVE GAS CONNECTION LIQUID CONNECTION /2" /6" 2 /2" 3 /6" /4" 3/4" 5 /2" 9/6" 3/6" 3 5/8" 3/4" D C B 3/4" 2 /2" PLUGGED SECONDARY DRAIN 3/4" 4 NPT FOR HORIZONTAL POSITION PLUGGED PRIMARY DRAIN 3/4" 4 NPT FOR HORIZONTAL POSITION PRIMARY DRAIN 3/4" 4 NPT FOR VERTICAL POSITION PLUGGED SECONDARY DRAIN 3/4" 4 NPT FOR VERTICAL POSITION 4TXCD009 DIMENSION (A) DIMENSION (B) DIMENSION (C) DIMENSION (D) MATCHED FURNACE WIDTH GAS CONNECTION LIQUID CONNECTION DRAIN PAN WEIGHT NET 30 /6" 2" 20 /8" 9 /4" 24 /2" 3/4" BRAZE 3/8" BRAZE REFRIGERANT CONTROL TXV (NONBLEED) PLASTIC 68.0 lb 9 5/6" 3/4" 8 /8" OPENING IN WRAPPER 2 /2" Equipment Submittal Page 8 of 6
Item: A Qty: Furnace ELECTRICAL / GENERAL DATA GENERAL POWER CONN COMBUSTION FAN BLOWER DRIVE Model: Voltage: Ampacity (Amps): Max Over. Pro. (Amps): S8XC00M5PSAA 20//60 4. 5.0 Motor HP: Motor Speed RPM: Full Load Amps: Centrifugal 3300 0.30 Drive: No. Used: Motor HP: Speed RPM: FLA: Direct.0 075 0.9 ORIFICES RATINGS (b) FILTERS Nat. Gas Qty Drill Size: L.P. Gas Qty. Drill Size: Gas Valve: 5 45 Redundant Single Stage st Stage input BTUH: st Stage Capacity BTUH (ICS): 00000 80000 2st Stage input BTUH: 2st Stage Capacity BTUH (ICS) (c,d) : Furnished: Recommended High Velocity No 20"x25"x" BURNERS 20 V SiNi Igniter 5 st Stage Temp. Rise (Min.Max.) : 2nd Stage Temp. Rise (Min.Max.): AFUE ( %) (c,d): 3060 80 WEIGHT / DIMENSIONS Shipping: Net: Dimension (Crated): 44.0 lb 36.0 lb 35 /2"x23"x30 7/8" Notes: (a) Meets Energy Star (b) For U.S. applications, above input ratings (BTUH) are up to 2,000 feet, derate 4 % per,000 feet for elevations above 2,000 feet above sea level. For Canadian applications, above input ratings (BTUH) are up to 4,500 feet, derate 4 % per,000 feet for elevations above 4,500 feet above sea level. (c) Central Furnace heating designs are certified to ANSI Z2.47 / CSA 2.3 latest edition. (d) Based on U.S. government standard tests. (e) Refer to the Vent Length Table in the Installer's Guide. (f) All S9V2 furnace models have a vent outlet diameter that equals 2 in. (g) The above wiring specifications are in accordance with National Electrical Code; however, installations must comply with local codes. Equipment Submittal Page 9 of 6
Item: A2 Qty: 2 32 5/8" SERVICE PANEL SEE NOTE 2 29 3/4" NOTES. TOP DISCHARGE AREA SHOULD BE UNRESTRICTED FOR AT LEAST 60" ABOVE UNIT. UNIT SHOULD BE PLACED SO ROOF RUNOFF WATER DOES NOT POUR DIRECTLY ON UNIT, AND SHOULD BE AT LEAST 2" FROM WALL AND ALL SURROUNDING SHRUBBERY ON TWO SIDES. OTHER TWO SIDES UNRESTRICTED. 2. ELECTRICAL AND REFRIGERANT COMPONENT CLEARANCES PER PREVAILING CODES. " ELECTRICAL SERVICE PANEL 7/8" DIA. HOLE LOW VOLTAGE 20" /8" DIA. K.O. WITH 7/8" DIA. HOLE IN CONTROL BOX BOTTOM FOR ELECTRICAL POWER SUPPLY " 32 3/4" LIQUID LINE SERVICE VALVE, 3/8" I.D. FEMALE BRAZE 7 3/4" 5" 7 3/4" 5" LIQUID LINE SERVICE VALVE, 3/8" I.D. FEMALE BRAZE 2 3/8" 3" GAS LINE /4" TURN BALL SERVICE VALVE, 3/4" I.D. FEMALE BRAZED 2 3/8" 3" GAS LINE SERVICE VALVE, 3/4" I.D. FEMALE BRAZED Equipment Submittal Page 0 of 6
Item: A2 Qty: 2 ELECTRICAL / GENERAL DATA GENERAL Model: Voltage: Unit Hertz: Unit POWER CONN. 4TTR4036 Minimum Circuit Ampacity: 8.0 208 230 60 Maximum Circuit Breaker: Minimum Protection Rating: 30.0 30.0 COMPRESSOR Rated Load Amps: Locked Rotor Amps: 4. 72.0 OUTDOOR MOTOR Horsepower: Motor Speed (RPM): Full Load Amps: Locked Rotor Amps: 0.25 0.64 NOTES:. Certified in accordance with the Unitary AirConditioner equipment certification program which is based on AHRI Standard 20/240. 2. Calculated in accordance with N.E.C. Use only HACR circuit breakers or fuses. 3. Standard line lengths 60'. Standard lift 60' Suction and Liquid line. For Greater lengths and lifts refer to refrigerant piping software Pub# 323320 4. * = 5, 20, 25, 30, 40 and 50 foot lineset available. REFRIGERANT Charge: Line Size O.D. Gas: Line Size O.D. LIQ: R40 6. lb 3/4" 3/8" NET SHIPPING WEIGHT 56.0 lb 83.0 lb NOTES: C. TOP DISCHARGE SHOULD BE UNRESTRICTED FOR AT LEAST 60" ABOVE UNIT C2. PLACE UNIT FROM WALL C3. PLACE SHRUBBERY AT LEAST 2" FROM UNIT ON TWO SIDES, OTHER SIDES UNRESTRICTED C4. PLACE UNIT SO ROOF RUNOFF DOES NOT FALL DIRECTLY ON UNIT C DISCHARGE C4 C3 C2 C3 WEIGHT AND CLEARANCE Equipment Submittal Page of 6
Item: A2 Qty: 2 A 4 7/6" DUCT FLANGE SCHRADER VALVE GAS CONNECTION LIQUID CONNECTION /2" /6" 2 /2" 3 /6" /4" 3/4" 5 /2" 9/6" 3/6" 3 5/8" 3/4" D C B 3/4" 2 /2" PLUGGED SECONDARY DRAIN 3/4" 4 NPT FOR HORIZONTAL POSITION PLUGGED PRIMARY DRAIN 3/4" 4 NPT FOR HORIZONTAL POSITION PRIMARY DRAIN 3/4" 4 NPT FOR VERTICAL POSITION PLUGGED SECONDARY DRAIN 3/4" 4 NPT FOR VERTICAL POSITION 4TXCB004 DIMENSION (A) DIMENSION (B) DIMENSION (C) DIMENSION (D) MATCHED FURNACE WIDTH GAS CONNECTION LIQUID CONNECTION DRAIN PAN WEIGHT NET 22 /2" 7 /2" 6 5/8" 5 3/4" 7 /2" 3/4" BRAZE 3/8" BRAZE REFRIGERANT CONTROL TXV (NONBLEED) PLASTIC 50.0 lb 9 5/6" 3/4" 8 /8" OPENING IN WRAPPER 2 /2" Equipment Submittal Page 2 of 6
Item: A2 Qty: 2 Furnace ELECTRICAL / GENERAL DATA GENERAL POWER CONN COMBUSTION FAN BLOWER DRIVE Model: Voltage: Ampacity (Amps): Max Over. Pro. (Amps): S8XB060M3PSAA 20//60 0. 5.0 Motor HP: Motor Speed RPM: Full Load Amps: Centrifugal 3300.39 Drive: No. Used: Motor HP: Speed RPM: FLA: Direct 0.5 075 6.8 ORIFICES RATINGS (b) FILTERS Nat. Gas Qty Drill Size: L.P. Gas Qty. Drill Size: Gas Valve: 3 45 Redundant Single Stage st Stage input BTUH: st Stage Capacity BTUH (ICS): 60000 48000 2st Stage input BTUH: 2st Stage Capacity BTUH (ICS) (c,d) : Furnished: Recommended High Velocity No 6"x25"x" BURNERS 20 V SiNi Igniter 3 st Stage Temp. Rise (Min.Max.) : 2nd Stage Temp. Rise (Min.Max.): AFUE ( %) (c,d): 3060 80 WEIGHT / DIMENSIONS Shipping: Net: Dimension (Crated): 30.0 lb 22.0 lb 35 /2"x9 /2"x30 7/8" Notes: (a) Meets Energy Star (b) For U.S. applications, above input ratings (BTUH) are up to 2,000 feet, derate 4 % per,000 feet for elevations above 2,000 feet above sea level. For Canadian applications, above input ratings (BTUH) are up to 4,500 feet, derate 4 % per,000 feet for elevations above 4,500 feet above sea level. (c) Central Furnace heating designs are certified to ANSI Z2.47 / CSA 2.3 latest edition. (d) Based on U.S. government standard tests. (e) Refer to the Vent Length Table in the Installer's Guide. (f) All S9V2 furnace models have a vent outlet diameter that equals 2 in. (g) The above wiring specifications are in accordance with National Electrical Code; however, installations must comply with local codes. Equipment Submittal Page 3 of 6
Item: A3 Qty: SERVICE PANEL SEE NOTE 2 28 /2" 25 5/8" NOTES. TOP DISCHARGE AREA SHOULD BE UNRESTRICTED FOR AT LEAST 60" ABOVE UNIT. UNIT SHOULD BE PLACED SO ROOF RUNOFF WATER DOES NOT POUR DIRECTLY ON UNIT, AND SHOULD BE AT LEAST 2" FROM WALL AND ALL SURROUNDING SHRUBBERY ON TWO SIDES. OTHER TWO SIDES UNRESTRICTED. 2. ELECTRICAL AND REFRIGERANT COMPONENT CLEARANCES PER PREVAILING CODES. " ELECTRICAL SERVICE PANEL 7/8" DIA. HOLE LOW VOLTAGE 8" /8" DIA. K.O. WITH 7/8" DIA. HOLE IN CONTROL BOX BOTTOM FOR ELECTRICAL POWER SUPPLY " 28 3/4" LIQUID LINE SERVICE VALVE, 3/8" I.D. FEMALE BRAZE 7 5/8" 5" 7 5/8" 5" LIQUID LINE SERVICE VALVE, 3/8" I.D. FEMALE BRAZE /2" 2 /4" GAS LINE /4" TURN BALL SERVICE VALVE, 3/4" I.D. FEMALE BRAZED /2" 2 /4" GAS LINE SERVICE VALVE, 3/4" I.D. FEMALE BRAZED Equipment Submittal Page 4 of 6
Item: A3 Qty: ELECTRICAL / GENERAL DATA GENERAL Model: Voltage: Unit Hertz: Unit POWER CONN. 4TTR408 Minimum Circuit Ampacity: 2.0 208 230 60 Maximum Circuit Breaker: Minimum Protection Rating: 20.0 20.0 COMPRESSOR Rated Load Amps: Locked Rotor Amps: 9.0 63.0 OUTDOOR MOTOR Horsepower: Motor Speed (RPM): Full Load Amps: Locked Rotor Amps: 0.06 0.60 NOTES:. Certified in accordance with the Unitary AirConditioner equipment certification program which is based on AHRI Standard 20/240. 2. Calculated in accordance with N.E.C. Use only HACR circuit breakers or fuses. 3. Standard line lengths 60'. Standard lift 60' Suction and Liquid line. For Greater lengths and lifts refer to refrigerant piping software Pub# 323320 4. * = 5, 20, 25, 30, 40 and 50 foot lineset available. REFRIGERANT Charge: Line Size O.D. Gas: Line Size O.D. LIQ: R40 4.5 lb 3/4" 3/8" NET SHIPPING WEIGHT 33.0 lb 53.0 lb NOTES: C. TOP DISCHARGE SHOULD BE UNRESTRICTED FOR AT LEAST 60" ABOVE UNIT C2. PLACE UNIT FROM WALL C3. PLACE SHRUBBERY AT LEAST 2" FROM UNIT ON TWO SIDES, OTHER SIDES UNRESTRICTED C4. PLACE UNIT SO ROOF RUNOFF DOES NOT FALL DIRECTLY ON UNIT C DISCHARGE C4 C3 C2 C3 WEIGHT AND CLEARANCE Equipment Submittal Page 5 of 6
Item: A3 Qty: Furnace ELECTRICAL / GENERAL DATA GENERAL POWER CONN COMBUSTION FAN BLOWER DRIVE Model: Voltage: Ampacity (Amps): Max Over. Pro. (Amps): S8XA026M2PSAA 20//60 7.6 5.0 Motor HP: Motor Speed RPM: Full Load Amps: Centrifugal 3300.39 Drive: No. Used: Motor HP: Speed RPM: FLA: Direct 0.333 075 4.8 ORIFICES RATINGS (b) FILTERS Nat. Gas Qty Drill Size: L.P. Gas Qty. Drill Size: Gas Valve: 2 5 Redundant Single Stage st Stage input BTUH: st Stage Capacity BTUH (ICS): 26000 24000 2st Stage input BTUH: 2st Stage Capacity BTUH (ICS) (c,d) : Furnished: Recommended High Velocity No 4"x25"x" BURNERS 20 V SiNi Igniter 2 st Stage Temp. Rise (Min.Max.) : 2nd Stage Temp. Rise (Min.Max.): AFUE ( %) (c,d): 2555 80 WEIGHT / DIMENSIONS Shipping: Net: Dimension (Crated): 02.0 lb 94.0 lb 35 /2"x6 /2"x30 7/8" Notes: (a) Meets Energy Star (b) For U.S. applications, above input ratings (BTUH) are up to 2,000 feet, derate 4 % per,000 feet for elevations above 2,000 feet above sea level. For Canadian applications, above input ratings (BTUH) are up to 4,500 feet, derate 4 % per,000 feet for elevations above 4,500 feet above sea level. (c) Central Furnace heating designs are certified to ANSI Z2.47 / CSA 2.3 latest edition. (d) Based on U.S. government standard tests. (e) Refer to the Vent Length Table in the Installer's Guide. (f) All S9V2 furnace models have a vent outlet diameter that equals 2 in. (g) The above wiring specifications are in accordance with National Electrical Code; however, installations must comply with local codes. Equipment Submittal Page 6 of 6