WH-1404, Rev. Feb 97

Similar documents
WYLE LABORATORIES, INC. Huntsville Facility

TABLE OF CONTENTS. 1.0 INTRODUCTION Scope References Test Specimen Description Summary 1

TABLE OF CONTENTS. 1.0 INTRODUCTION Scope References Test Specimen Description Summary 3

Test Report. Appliance EMF Testing

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

Engineering Report Vibration Test for Intertek Testing Services Prepared by Approved by 9725 Girard Avenue South Minneapolis, MN 55431

PQS performance specification

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

Certificate of Compliance

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

An Urgent Bulletin from CSA Group

City of Los Angeles RECOGNIZED ELECTRICAL FIELD TESTING AGENCIES

PQS performance specification

PQS Independent type-testing protocol

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

Certificate of Compliance

Michael J. Caron, Test Engineer. Lee R. Senne, Test Technician. Kent L. Erickson, Dynamics Division Manager

Certificate of Compliance

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

Part 2-55: Medical electrical equipment. Particular requirements for the basic safety and essential performance of respiratory gas monitors

Laboratory Authorization Certificate

Certificate of Compliance

ISO INTERNATIONAL STANDARD. Oscillation-type density meters Part 1: Laboratory instruments

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

REVISION HISTORY Rev Description Author. Approved by Date A Initial release per ECO Dean King Dean King November 16, 2012

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

Model OEM-2 INSTRUCTIONS FOR USE

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SECTION ULTRASONIC TRANSIT TIME CLAMP-ON FLOW MEASURING SYSTEM

ULT Freezer Performance Testing Emerson Design Services Network Project #

PROCEDURES FOR APPROVAL OF LIFE-SAVING APPLIANCES AND FIRE SAFETY SYSTEMS, EQUIPMENT AND PRODUCTS

Technical Assessment Guideline Applicable for the Kiwa KQ Certification Scheme:

EC Type Examination Certificate

L1L2L3. 99 Washington Street Melrose, MA Phone Toll Free Visit us at

Declaration of Conformity

Flexible Schedule of Accreditation. SIRA CERTIFICATION SERVICE Unit 6, Hawarden Industrial Park, Hawarden, CH5 3US.

Flexible Schedule of Accreditation. SIRA CERTIFICATION SERVICE Unit 6, Hawarden Industrial Park, Hawarden, CH5 3US.

PQS Independent type-testing protocol

IAS Accreditation Number UL International Germany GmbH Address Admiral Rosendahl Strasse 23 Neu Isenburg Germany

Federal Law of the Russian Federation of December 27, 2009 N 347-FZ "Technical regulation on safety of low-voltage equipment" Part I

7.3 Design and Development Design and development planning Design and development inputs Design and development outputs 7.3.

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

OPR Power Series AC to DC POWER SUPPLY SERIES WITH REMOTE MANAGEMENT AND ALARM SYSTEMS. Model Nos. OPR200-24S / OPR200-24R. Manual

4000TOC Sensor. Continuous On-Line Measurement Total Organic Carbon Monitoring. THORNTON Leading Pure Water Analytics

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

Energy Efficiency Labelling

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SECTION INCLINE WHEELCHAIR LIFTS. Display hidden notes to specifier by using Tools / Options / View / Hidden Text.

SCOPE OF ACCREDITATION TO ISO/IEC 17065:2012

Circuit Breakers JANUARY The electronic pdf version of this document found through is the officially binding version

AUGUST 2016 CONTENTS:

13799 Commerce Parkway Richmond, British Columbia V6V 2N9 Canada Benjamin Barker, Senior Manager Accreditations

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SINGAPORE I. RATIONALE FOR REGULATION. COUNTRY RATIONALE FOR REGULATION Singapore Consumer Protection II. REGULATION BODY

INTERNATIONAL STANDARD

SUGGESTED SPECIFICATION For Series 300 Manual Transfer Switches (3MTS)

EU Declaration of Conformity

10606 Bloomfield Ave Santa Fe Springs, CA USA

A Review of America s First Step Towards the Harmonization of Portable Battery Standards: UL 62133

INTERNATIONAL STANDARD

SHORT CIRCUIT ISOLATOR TO NEXT COMPONENT REQUIRING POWER TO NEXT KEYPAD (** IF REQUIRED) STROBE RELAY MODULE KEYSWITCH ISOLATION MODULE STROBE

SINGAPORE I. RATIONALE FOR REGULATION. COUNTRY RATIONALE FOR REGULATION Singapore Consumer Protection II. REGULATION BODY

IEC60601_1K. Medical electrical equipment Part 1: General requirements for basic safety and essential performance

Liquid Helium Level Instruments

(Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2018/C 209/02)

CO-ORDINATION OF NOTIFIED BODIES PPE Regulation 2016/425 RECOMMENDATION FOR USE

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

EOTec 2C32 Installation Guide

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

IEC60601_1J. Medical electrical equipment Part 1: General requirements for basic safety and essential performance

IEC60601_1J. Medical electrical equipment Part 1: General requirements for basic safety and essential performance

RENAR Accreditation Activities

REACTION TO FIRE CLASSIFICATION REPORT No. RA ACCORDING TO THE EUROPEAN STANDARD NF EN A1:2013

UltraLITE Model ELU Centralized Emergency Lighting Inverter 4.2 KW- 5 KW

Supertron Sensing Pte Ltd Certificate No. : LA C Blk 16 Kallang Place #07-04 Issue No. : 4 Singapore Date : 04 February 2015

Certificate of Compliance

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

Operating Instructions

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

ISO INTERNATIONAL STANDARD

UL TEST REPORT AND PROCEDURE

D R A F T. ISO/TC 211 N 31xx. ISO/TC 211 Geographic information/geomatics Number of pages: 9

NATIONAL TECHNICAL SYSTEMS

INTERNATIONAL STANDARD

Mark 25 Ultrapure Water Conductivity Analyzer

Listing Constructional Data Report (CDR)

TECHNICAL MANUAL for FIRE TAPE. E-Z TAPING SYSTEM PO BOX GREEN BAY, WI

FEB. 17 Rev. A1

ISO 3999 INTERNATIONAL STANDARD. Radiation protection Apparatus for industrial gamma radiography Specifications for performance, design and tests

CERTIFICATION BODY ACCREDITATION PROGRAM QUALITY AUDITING INSTITUTE

TECHNICAL SPECIFICATION

Ohio Medical is the only name you need to know for your medical suction and oxygen therapy and medgas equipment needs.

INTERNATIONAL STANDARD

Certificate of Compliance

Transcription:

WH-1404, Rev. Feb 97

Page No. i REVISIONS REPORT NO. T56737 DATE December 20, 2011 REV DATE PAGE OR PARAGRAPH AFFECTED BY APP'L DESCRIPTION OF CHANGES A 12/16/11 Cover Page Changed total of pages and title. A 12/16/11 TOC-1 of 1 Updated Attachment H. A 12/16/11 Page No. 1 of 4 1.1 Scope Added second paragraph. A 12/16/11 Page No. 1 of 4 1.2 Product Description Revised. A 12/16/11 Page No. 2 of 4 1.4 Compliance Summary Revised first paragraph.

Page No. ii A 12/16/11 Page No. 2 of 4 2.1 Details of Test System Revised Table 2-1 Components List A 12/16/11 Page No. 3 of 4 2.3 Construction Details Revised first paragraph. A 12/16/11 Page No. 3 of 4 2.3 Construction Details Table 2-2 Load Ratings A 12/16/11 Page No. A-2 of 4 through A-4 of 4 Revised titles of Photograph Nos. 1 and 6. A 12/16/11 Page No. G-1 of 7 ATTACHMENT G Changed title page and updated specification sheets. A 12/16/11 Page No. H-1 of 20 ATTACHMENT H Updated attachment contents.

Page No. TOC-1 of 1 TABLE OF CONTENTS Page No. 1.0 INTRODUCTION...1 1.1 Scope...1 1.2 Product Description...1 1.3 References...1 1.4 Compliance Summary...2 2.0 SYSTEM TEST CONFIGURATION...2 2.1 Details of Tested System...2 2.2 Electrical...3 2.3 Construction Details...3 2.4 Quality Assurance...3 2.5 Test Equipment and Instrumentation...3 ATTACHMENTS ATTACHMENT A PHOTOGRAPHS...A-1 ATTACHMENT B SAFETY CRITICAL COMPONENTS...B-1 ATTACHMENT C TEST DATA...C-1 ATTACHMENT D INSTRUMENTATION EQUIPMENT SHEET...D-1 ATTACHMENT E UL 746C TEST REPORT...E-1 ATTACHMENT F AMERICANS WITH DISABILITIES ACT ACCESSIBILITY GUIDELINES 1009.2... F-1 ATTACHMENT G PATRIOT PORTABLE PRO LIFT SPECIFICATIONS...G-1 ATTACHMENT H INSTALLATION AND OPERATING INSTRUCTIONS... H-1 A

Page No. 1 of 4 1.0 INTRODUCTION 1.1 Scope This report documents conformance of the Aqua Creek Products Model F-12PPL-HD Patriot Portable Pro Pool Lift with the applicable requirements of the American with Disabilities Act (ADA): 1990 (Amendments Act of 2008): Accessibility Guidelines 1009.2, ANSI/AAMI ES60601-1:2005 "Medical Electrical Equipment Part 1: General Requirements for Basic Safety and Essential Performance", and Clause 27 of the "Standard for Polymeric Materials" UL 746C. Testing and evaluation of the Patriot Portable Pro Pool Lift was conducted at Wyle Laboratories facility in Huntsvile, AL and Aqua Creek Products facility in Missoula, MT. The testing and evaluation was authorized by Mr. Brian Goettlich of Aqua Creek Products and conducted during July 7-10, 2009. This report also includes two (2) optional models: 1) Patriot AC Portable F-12PPL-TSA and 2) Rebel Portable F-2PR. These models are modified versions of the Patriot Portable Pro Pool Lift as described in Section 2.1 of this report. A Contact: Mr. Brian Goettlich Telephone: (888) 687-3552 E-mail: bgoettlich@aquacreek.com 1.2 Product Description The Patriot Portable Pro Pool Lift, Patriot AC Portable F-12PPL-TSA Pool Lift, and Rebel Portable F-2PR Pool Lift are 24-VDC battery-powered, self-operable, portable lifts designed to assist physically challenged individuals with access to swimming pools and/or spas. A A detailed description of the subject pool lifts, hereinafter referred to as the Equipment Under Test (EUT), and support equipment is provided in Section 2.1. 1.3 References Aqua Creek Products Purchase Order No. 4253 Wyle Laboratories' Quotation No. HSV 545/048441/NB American with Disabilities Act: 1990 (Amendments Act Of 2008): Accessibility Guidelines 1009.2 ANSI/AAMI ES60601-1:2005, "Medical Electrical Equipment Part 1: General Requirements for Basic Safety and Essential Performance" (IEC 60601-1:2005) UL 746C "Standard for Polymeric Materials" Wyle Laboratories Quality Asurance Program Manual, Revision 3 ANSI/NCSL Z540-1, "Calibration Laboratories and Measuring and Test Equipment, General Requirements" ISO 10012-1, "Quality Assurance Requirements for Measuring Equipment"

Page No. 2 of 4 1.4 Compliance Summary The subject pool lifts detailed in Section 1.2 above complied with the applicable requirements of ANSI/AAMI ES60601-1:2005 and ADA Guidelines 1009.2 as indicated in Table 1-1 with no modifications necessary. This evaluation report is valid for the Patriot Portable Pro Pool Lift, the Patriot AC Portable F-12PPL-TSA lift, and the Rebel Portable F-2PR lift. Any safety changes, revisions, or corrections made to the lifts after this evaluation shall be reevaluated, and a revised report shall be issued. A Test Description Table 1-1 Compliance Summary Requirements ANSI/AAMI ES60601-1 Compliant/Non-Compliant General Tests Section 4 Compliant Accessible Parts Section 5.9 Compliant Equipment Identification Section 7 Compliant Protection Against Mechanical Hazards Maximum Temperature During Normal Use Section 8 Section 11 Compliant Compliant Test Description Requirements ADA Accessibility Guidelines Compliant/Non-Compliant ADA Requirements 1009.2 Compliant 2.0 SYSTEM TEST CONFIGURATION 2.1 Details of Tested System The EUT and associated components of the test system are identified in Table 2-1. Table 2-1 Components List * Item Part Number Quantity Battery/Control Combination CBJH18 1 24-Volt Battery BAJ 1 Control Box CBJ2 1 Battery Charger, Wall Mount CHJ2 1 Battery Charger, Plug-In CH08 1 Linak Actuator LA-34 1 Derock Actuator (2) YLSDTZ01 1 Handset, DIN Connector HB00-U017 1 Handset, RG11 Connector HB00-U038 1 A * See model specifications for specific components list.

Page No. 3 of 4 2.2 Electrical Ratings Battery Charger 100/240 VAC, 50/60 Hz Battery 24 VDC, 6.5A 2.3 Construction Details Each of the pool lift frames are constructed of stainless steel coated with a UV resistant powder coat finish. For specific construction details see Attachments G and H. Approximate weight and measurements of the lifts are as follows: A Weight: 960 lbs. (including weights) Dimensions (Retracted Mode): 41 3/8 (105 cm) height x 50 5/8 (128.5 cm) deep x 53 5/8 (128.5 cm) wide Table 2-2 Load Ratings Model Load Capacity (lbs.) Static Load Capacity (lbs.) A Patriot Portable F-12PPL-HD 450 675 Patriot AC Portable F-12PPL-TSA 300 450 Rebel Portable F-2PR 300 450 2.4 Quality Assurance All work performed on this program was in accordance with Wyle Laboratories' Quality Assurance Program and Wyle Laboratories Quality Program Manual, which conforms to the applicable portions of International Standard Organization (ISO) Guide 17025. The Wyle Laboratories,, Quality Management System is registered in compliance with the ISO-9001 International Quality Standard. Registration has been completed by Quality Management Institute (QMI), a Division of Canadian Standards Association (CSA). Wyle Laboratories is accredited (Certificate No. 845.01) by the American Association for Laboratory Accreditation (A2LA), and the results documented in this test report have been determined in accordance with Wyle s scope of accreditation unles otherwise stated in the report. 2.5 Test Equipment and Instrumentation All instrumentation, measuring, and test equipment used in the performance of this test program was calibrated in accordance with Wyle Laboratories' Quality Assurance Program which complies with the requirements of ANSI/NCSL Z540-1, ISO 10012-1, and ISO/IEC 17025. Standards used in performing all calibrations are traceable to the National Institute of Standards and Technology (NIST) by report number and date. When no national standards exist, the standards are traceable to international standards or the basis for calibration is otherwise documented. Attachment D contains of the instrumentation, measuring, and test equipment that were used to perform the tests.

Page No. A-1 of 4 Test Report No.T56737-02

Page No. B-1 of 2 ATTACHMENT B SAFETY CRITICAL COMPONENTS

Page No. B-2 of 2

Page No. C-1 of 10 ATTACHMENT C TEST DATA

Page No. C-2 of 10

Page No. C-3 of 10

Page No. C-4 of 10

Page No. C-5 of 10

Page No. C-6 of 10

Page No. C-7 of 10

Page No. C-8 of 10

Page No. C-9 of 10

Page No. C-10 of 10

Page No. F-11 of 4

Page No. G-1 of 7 ATTACHMENT G A PORTABLE LIFT SPECIFICATIONS

Page No. G-2 of 7 A

Page No. G-3 of 7 A

Page No. G-4 of 7 A

Page No. G-5 of 7 A

Page No. G-6 of 7 A

Page No. G-7 of 7 A

Page No. H-1 of 20