CERTIFICATE. Issued Date: Apr. 16, 2014 Report No. : R-ITCEP11V04

Similar documents
CERTIFICATE. Issued Date: Dec. 23, 2010 Report No.: 10C142R-ITCEP7V05

Test Report. Appliance EMF Testing

EU Declaration of Conformity

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

EU Declaration of Conformity

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

REVISION HISTORY Rev Description Author. Approved by Date A Initial release per ECO Dean King Dean King November 16, 2012

EU Declaration of Conformity

Sound Pressure Level Test Report Report No. : PH2_09_ Date : 2009/6/30

EU Declaration of Conformity

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

CO-ORDINATION OF NOTIFIED BODIES PPE Regulation 2016/425 RECOMMENDATION FOR USE

Report No.: SQE Page 2 of 11 Issued: Test Report No. : EMC -- T E S T R E P O R T SQE Equipment under Test : 24Bit Barometer

C-Bus Bus Coupler with Scenes 5102BCLEDL 5104BCL

APPLICATION FOR THE CERTIFICATION/ ASSESSMENT OF A MANAGEMENT SYSTEM C C C

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

Clipsal is a registered trademark of Clipsal Australia Pty Ltd. Saturn is a trademark of Clipsal Australia Pty Ltd.

safety & regulatory information

AUGUST 2016 CONTENTS:

INTERNATIONAL STANDARD

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. F2 LABS Peters Road Middlefield, OH Wendy Fuster Phone: Ext.

Commentary from a Certification Body. Mike Violette Director American Certification Body

Guidance Note No 21/1. CE Marking Windows and doorsets to BS EN 16034

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

INTERNATIONAL STANDARD

Implementation of the Construction Products Regulation (CPR) in harmonized standards - Template for Annex ZA -

7.3 Design and Development Design and development planning Design and development inputs Design and development outputs 7.3.

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

MPE TEST REPORT 2APNR-GW631Q R1805A0254-M1V1

GNB-CPR Position Paper: Issuance of certificates under CPR

Taiwantrade Supplier Business Information Verification Report

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

Declaration of conformity maintenance record. No Revised date Contents Reasons Approval

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

Implementation of the Construction Products Regulation (CPR) in harmonized standards - Template for Annex ZA -

C-Bus Black & White MK II Desktop Touchscreen. 5000CTD2 Series. User s Guide REGISTERED DESIGN REGISTERED PATENT

RADAR REFLECTOR STANDARD FOR CERTIFICATION. DET NORSKE VERITAS Veritasveien 1, N-1322 Høvik, Norway Tel.: Fax:

1. Which national directives/laws control the placing on the market of equipment for explosive atmospheres?

SAFETY/ SECURITY - FIRE FIGHTING INTEGRATED SYSTEMS

CE marking & your legal obligations

RF TEST REPORT. ZTE Corporation SRQ-VFD510 ZTE LTE/WCDMA/GSM GPRS RXC RF07

INTERNATIONAL STANDARD

MARINE GYRO COMPASS STANDARD FOR CERTIFICATION. DET NORSKE VERITAS Veritasveien 1, N-1322 Høvik, Norway Tel.: Fax:

This annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation

Light Level Detector, Surface Mount 5754PE. Installation Instructions

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

C-Bus PIR Occupancy Sensor. Installation Instructions 5751L

C-Bus Black & White MK II Touch Screen. 5000CT2 Series. User s Guide

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 1

SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. FCC MPE REPORT

Test Report to AS/NZS :2015. Report No. T160402_S

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017

This annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation

INTERNATIONAL STANDARD

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

CERTIFICATE OF ACCREDITATION

INTERNATIONAL STANDARD

(Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2016/C 054/02)

EN50438 TEST REPORT SUMMARY. Requirements for the connection of micro-generators in parallel with public low-voltage distribution networks

(Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2018/C 209/02)

PQS performance specification

Draft for Comment Please comments to Part A(i)

The Impact of Marking Requirements. on Design and Performance of Power Converters and Electrical Drives

OFFICIAL JOURNAL OF IN VITRO DIAGNOSTIC MEDICAL DEVICES DIRECTIVE (98/79/EC)

TEST REPORT IEC60529 Edition TD990426C02

Cisco TelePresence MCU 4200 Series safety and compliance information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

ISO INTERNATIONAL STANDARD. Oscillation-type density meters Part 1: Laboratory instruments

INTERNATIONAL STANDARD

How to Self-Certify For the CE Mark A Quick Start Guide by Dennis King - EMI Test Lab

CE marking & your legal obligations

Technical Assessment Guideline Applicable for the Kiwa KQ Certification Scheme:

This document is a preview generated by EVS

FCC COMPLIANCE REPORT. SHENZHEN STARWELL TECHNOLOGY CO., Ltd. AC/DC ADAPTER

C-Bus Pascal Automation Controller 5500PACA. Installation Instructions

EMC TEST REPORT for HUIZHOU FREEWAY ELECTRONIC CO., LTD. Car DVD/Navigation Player

INTERNATIONAL STANDARD

DUST TEST REPORT. :Gold Apollo Co., Ltd. Company Model Name :A27. Date of Received :APR. 19, 2006 Date of Tested :APR. 19, 2006

Declaration of Conformity

GigaCore RPSU. Redundant power supply for GigaCore 14R and 16Xt. Quick Start Guide. V2.0.0 Rev1. English

ni.com/manuals For specifications, refer to the NI USB-TC01 Device Specifications document available at ni.com/manuals.

2015 /9C EN-00 OSRAM GmbH Marcel-Breuer-Str München Germany. LED module PL-LIN-HV-DC-G1. M see attached list

Australian Standard. Electroacoustics Sound calibrators AS IEC This is a free 7 page sample. Access the full version online.

EMC in Industrial electronics PE:Region EMC/EMI in overview basic principles, current state of technology

This is a preview - click here to buy the full publication

INTERNATIONAL STANDARD

Supplement. Title: 365 Users Supplement Issue: 8 Part Number: Issue Date: 7/16 Print Date: August 2010 Page Count: 6 Revision/Date:

INSTALLATION GUIDE. AXIS A1001 Network Door Controller

TEMPORARY IMMERSION AND DUST TEST REPORT

INTERNATIONAL STANDARD

AS/NZS IEC :2015

Tekniske Data. GreenMatic har svaret. GreenMatic har her samlet nogle tekniske data finder du ikke det du søger så ring og vi skaffer det til dig.

This document is a preview generated by EVS

Transcription:

CERTIFICATE Issued Date: Apr. 16, 2014 Report No. : 131418R-ITCEP11V04 This is to certify that the following designated product Product : HMI (Human Machine Interface) Model Number : MT8070iE, MT607iE, MT6070iE, Company Name : Weintek Labs.,Inc. This product, which has been issued the test report listed as above in QuieTek Laboratory, is based on a single evaluation of one sample and confirmed to comply with the requirements of the following EMC standard. E EN 55022: 2010+AC: 2011 Class B EN 55024: 2010 EN 61000-3-2: 2006+A2: 2009 IEC 61000-4-2 Ed. 2.0: 2008 EN 61000-3-3: 2008 IEC 61000-4-3 Ed. 3.2: 2010 IEC 61000-4-4 Ed. 3.0: 2012 IEC 61000-4-5 Ed. 2.0: 2005 IEC 61000-4-6 Ed. 3.0: 2008 IEC 61000-4-8 Ed. 2.0: 2009 AS/NZS CISPR 22: 2009+A1: 2010 IEC 61000-4-11 Ed. 2.0: 2004 TEST LABORATORY Vincent Lin / Director No.5-22, Ruishukeng, Linkou Dist., New Taipei City 24451, Taiwan, R.O.C. TEL:+886-2-8601-3788 FAX:+886-2-8601-3789 Email:service@quietek.com http://www.quietek.com

Report No:131418R-ITCEP11V04 CE Test Report Product Name : HMI (Human Machine Interface) Model No. : MT8070iE, MT607iE, MT6070iE, Applicant : Weintek Labs.,Inc. Address : 3F, No. 910, Zhongzheng Rd., Zhonghe Dist., New Taipei City, Taiwa Date of Receipt : 2013/01/23 Issued Date : 2014/04/16 Report No. : 131418R-ITCEP11V04 Report Version : V2.1-Draft The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standard through the calibration of the equipment and evaluated measurement uncertainty herein. This report must not be used to claim product endorsement by TAF or any agency of the government. The test report shall not be reproduced without the written approval of QuieTek Corporation. Page: 1 of 59

CE Declaration of Conformity We herewith confirm the following designated products to comply with the requirements set out in the Council Directive on the approximation of the laws of the Member States relating to Electromagnetic Compatibility Directive (2004/108/EC) with applicable standards listed below. Product Trade name Model Number Applicable Harmonized Standards under Directive 2004/108/EC : HMI (Human Machine Interface) : EasyView WeinView Weintek : MT8070iE, MT607iE, MT6070iE, : EN 55022: 2010+AC: 2011, Class B EN 55024: 2010 EN 61000-3-2: 2006+A2: 2009 EN 61000-3-3: 2008 AS/NZS CISPR 22: 2009+A1: 2010 Company Name : Company Address : Telephone : Facsimile : Person in responsible for marking this declaration: Name (Full Name) Title/ Department Date Legal Signature

Date: Apr. 16, 2014 QTK No.: 131418R-ITCEP11V04 CE Statement of Conformity This statement is to certify that the designated product below. Product Trade name : HMI (Human Machine Interface) : EasyView WeinView Weintek Model Number : MT8070iE, MT607iE, MT6070iE, Company Name : Weintek Labs.,Inc. Applicable Standards : EN 55022: 2010+AC: 2011, Class B EN 55024: 2010 EN 61000-3-2: 2006+A2: 2009 EN 61000-3-3: 2008 AS/NZS CISPR 22: 2009+A1: 2010 One sample of the designated product has been tested and evaluated in our laboratory to find in compliance with the applicable standards above. The issued test report(s) show(s) it in detail. Report Number : 131418R-ITCEP11V04 TEST LABORATORY Vincent Lin / Director The verification is based on a single evaluation of one sample of above-mentioned products. It does not imply an assessment of the whole production and does not permit the use of the test lab. Logo. QuieTek Corporation / No.5-22, Ruishukeng, Linkou Dist., New Taipei City 24451, Taiwan, R.O.C. Tel: 886-2- 8601-3788, Fax: 886-2- 8601-3789, E-mail: service@quietek.com

Report No: 131418R-ITCEP11V04 Test Report Issued Date : 2014/04/16 Report No. : 131418R-ITCEP11V04 Product Name : HMI (Human Machine Interface) Applicant : Weintek Labs.,Inc. Address : 3F, No. 910, Zhongzheng Rd., Zhonghe Dist., New Taipei City, Taiwan Manufacturer : Weintek Labs.,Inc. Model No. : MT8070iE, MT607iE, MT6070iE, EUT Rated Voltage : DC 24V EUT Test Voltage : DC 24V Trade Name : EasyView WeinView Weintek Applicable Standard : EN 55022: 2010+AC: 2011, Class B EN 55024: 2010 EN 61000-3-2: 2006+A2: 2009 EN 61000-3-3: 2008 AS/NZS CISPR 22: 2009+A1: 2010 Test Result : Complied Performed Location : Quietek Corporation (Linkou Laboratory) No.5-22, Ruishukeng, Linkou Dist., New Taipei City 24451, Taiwan, R.O.C. TEL:+866-2-8601-3788 / FAX:+886-2-8601-3789 Documented By : ( Adm. Specialist / Anny Chou ) Reviewed By : Approved By : ( Assistant Engineer /Mark Lu ) ( Director / Vincent Lin ) Page: 2 of 59

Report No: 131418R-ITCEP11V04 Laboratory Information We, QuieTek Corporation, are an independent EMC and safety consultancy that was established the whole facility in our laboratories. The test facility has been accredited/accepted (audited or listed) by the following related bodies in compliance with ISO 17025, EN 45001 and specified testing scopes: Taiwan R.O.C. : BSMI, NCC, TAF Norway : DNV USA : FCC Japan : VCCI The related certificate for our laboratories about the test site and management system can be downloaded from QuieTek Corporation s Web Site : http://www.quietek.com/tw/ctg/cts/accreditations.htm The address and introduction of QuieTek Corporation s laboratories can be founded in our Web site : http://www.quietek.com/ If you have any comments, Please don t hesitate to contact us. Our contact information is as below: HsinChu Testing Laboratory : No.75-2, 3rd Lin, Wangye Keng, Yonghxing Tsuen, Qionglin Shiang, Hsinchu County 307, Taiwan, R.O.C. TEL:+886-3-592-8858 / FAX:+886-3-592-8859 E-Mail : service@quietek.com LinKou Testing Laboratory : No.5-22, Ruishukeng, Linkou Dist., New Taipei City 24451, Taiwan, R.O.C. TEL : 886-2-8601-3788 / FAX : 886-2-8601-3789 E-Mail : service@quietek.com Suzhou (China) Testing Laboratory : No. 99 Hongye Rd., Suzhou Industrial Park Loufeng Hi-Tech Development Zone., Suzhou,China. TEL : +86-512-6251-5088 / FAX : +86-512-6251-5098 E-Mail : service@quietek.com Page: 3 of 59