AVANI Grinding Booth GB-6066-DD Customer: Kelly Walsh Customer PO#: 11305 AVANI SO#: Serial #: 153920-153921 Ship Date / Install Date: Tested By: Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference. SMT-20151207
AVANI Grinding Booth GB-6066-DD General Safety Information MACHINE WARNING SIGNS Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. Used without the safety alert symbol ( ) indicates potentially hazardous situation which, if not avoided, may result in property damage. Warning of electric shock Do not expose the equipment to rain or use in damp locations. Figure 1 Do not use the equipment around flammable products, if not avoided, sparks can ignite vapors from flammable products. Read and understand all warnings and operating instructions before using this equipment. Failure to follow all instructions may result in electric shock, fire, and/or serious personal injury or property damage. Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference. SMT-20151207
AVANI Grinding Booth GB-6066-DD TABLE OF CONTENT MACHINE WARNING SIGNS... 2 Specifications... 4 ADDITIONAL WELDING BOOTH SAFETY RULES... 6 Assembly... 7 Installation... 7 ELECTRICAL INSTALLATION... 7 Operation... 8 Dimensions (in mm/inches)... 10 Parts... 11 Contact Information... 19 Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference. SMT-20151207
GB-6066-DD AVANI Grinding Booth Specifications - Top Panel Dimensions: 72.1" x 72.1" x 2.1" - Back Draft Dimensions: 82" x 56.7" x 9.4" (NOT incl. clean out drawer) - Back Draft Adjustable Inlet Slots: (10) 1" x 50" - Side Panel Dimensions: (2) 72.1" x 96.1" - Working Lights: (2) Explosion Proof Lights (110V, Single Phase, 60 Hz, 20W) - Adjustable Knobs: (20) 2 ½" Five Star Twists - Panel Construction: 16-gauge welded steel single wall with cross and up bracing - Powder Coated: Avani Safety Blue Standard (custom colors available) - Five Piece Configuration: (2) side panels, (1) backdraft assembly, (1) Top panel, (1) double door - Booths can be mounted back-to-back, side-to-side or both options - Electrical Outlets: (2) 110V Outlets @ (1) Switch (additional single or three phase outlets available) - Light Switch: For overhead lights - Compressed Air Connection ***Double Door with center opening: (2) 36" x 81.6" ***Adjustable Louver: (2) 30.2" x 9.6" ***Reference: GB-6066-DD Submittal Drawing 2015.10.22 Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference. SMT-20151207
AVANI Grinding Booth GB-6066-DD General Safety Information (Continued) Use this product carefully to effectively avoid any possible danger. Observe the following safety regulations to avoid bodily injury due to electrocution during use. Read this Manual carefully before operating the product and preserve the Operation Manual properly. 1. Keep work area clean and organized. A disorderly working environment will cause inconvenience and danger during operation. 2. Check if the working environment is suitable for using the product. Do not use the product in a humid environment. Use the product in a good working environment to reduce risks. Do not use the product in a flammable gas or liquid environment to avoid danger. 3. Keep other persons away from the product, except for the operator, to avoid danger. Do not let children get close to the product. All wires used by the product shall be in a safe location to prevent children from touching them. 4. All tools shall be safely stored. When the tools are not used, please store them in a dry place safely beyond the reach and access of children. 5. If the machine breaks down, contact a service technician. Do not attempt to repair and possibly damage the machine. 6. When using the product, be sure to put on a welding suit and mask. 7. Use the electrical wires correctly. During use, do not drag the electrical wires forcefully. Do not use these wires if fraying or current leakage occurs to avoid injury to the operator. 8. Before replacing parts, shut off power to the machine. Check that the switch is in on or off position. Do not attempt the replacement when the machine is running. To replace parts or filter material, make certain that the switch Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference. SMT-20151207
GB-6066-DD AVANI Grinding Booth is off. 9. Use the power cord correctly. The total length of power cord shall not exceed 10 feet to avoid low power due to a drop in voltage and to prevent a possible hazard. When connecting the product, always follow the instructions in the Operation Manual to avoid injuries. 10. Care and Maintenance: Confirm that the parts/accessories have been fully assembled and will not adversely affect the machine operation. Check if the machine is operated properly. Replace damaged parts or accessories according to the instructions of the Manual. If the said instructions are not specified in the Manual, have a professional technician carry out the maintenance or replacement. Check that the electrical specifications of this machine meet safety requirements, and that the maintenance is carried out by a professional technician. Use original manufacturer s parts and accessories to avoid injury. If a problem occurs, contact your dealer immediately. ADDITIONAL WELDING BOOTH SAFETY RULES The Welding Booth can be dangerous if it is operated incorrectly. Therefore, the product must be used cautiously to avoid causing a hazard or damage. Unnecessary injuries may occur by failing to follow the instructions of the Safety Rules Manual. Be sure to put on protection equipment or suit that can protect your body, such as helmet and eye mask to avoid injuries from occurring. If any doubts or any unfitness occurs during use, be sure to stop the operation immediately. Keep in mind that the user shall be liable for using according to the specified safety rules and for operating the machine correctly. 1. Read this Manual carefully before operating the product. 2. Be sure to follow local electrical and safety regulations and observe the electrical safety standards practiced in the relevant area. All electrical wire Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference. SMT-20151207
GB-6066-DD AVANI Grinding Booth connections and installation shall be carried out by a professional technician. 3. Do not operate the product near flammable materials, as sparks may ignite these materials and cause an explosion. Please confirm there aren t any flammables near the working site to avoid hazard. 4. This product is suitable for collecting smoke and welding oil gas. Do not use it in collecting iron chips and dust at the same time to avoid producing sparks. 5. Before replacement of parts or filter materials, be certain that the switch is disconnected. 6. Do not kink the power cord and keep it away from oil, chemicals or flammables. 7. Check that the voltage, phase count and grounding wire match the machine requirements. 8. When the fan blades are operated at high speed, do not reach hand near these blades to prevent finger from breaking or clothes/necktie from getting caught. Do not put the hand or foreign matter into the air inlet to avoid getting caught in the high-speed rotation of fan blades. 9. When not in use, all air inlets of Welding Booth shall be covered. Assembly Do not connect the Welding Booth before the assembly is finished and you have read and understood all of the precautions stated in the Manual. NOTE: For correct assembly, refer to the Illustrations and Parts List on pages 13-18. Installation MOVING AND TRANSPORTATION The net weight of this machine is about lbs. It CANNOT be handled and transported without the help of lifting tools. For your safety, read all instructions carefully. Do not move without the help of others to avoid causing danger. ELECTRICAL INSTALLATION POWER CONNECTION 1. Confirm that the power is properly connected under normal power supply condition. It is recommended to provide manual shutdown device before Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference. SMT-20151207
GB-6066-DD AVANI Grinding Booth connecting power. 2. It is recommended to protect the control equipment with suitable grade of fuse, and the length of fuse and power cord shall not be over 10 feet. SHUTDOWN 1. Disconnect power by manual method. 2. When stopping operation, check if the switch is under off status. EARTHING WIRE Connect yellow/green wires to the earthing wire power jack. Confirm that the earthing wire has been properly connected before connecting main power cord to the machine at all times. Do not disconnect the wiring jack before cutting off power! POWER INSTALLATION AND STORAGE The electrical power is configured as following. If conditions are beyond the scope stated below, then it is required to ensure that the power is well arranged and safe. Ambient temperature: Between 41 F and 131 F. If the time is over 24 hours, then the ambient average temperature shall not be over 122 F. Humidity: Between 30% and 95% Altitude: 3,280 feet Moving and Storing: -13 F to 131 F. For short-time storage (less than 24 hours), the storage temperature can be up to 158 F. Operation PRIOR TO START UP Purpose: The Welding Booth is specially suitable for treating the smoke generated during ordinary welding processing work, which can effectively collect and screen the smoke resulting from the welding work in maintaining the air quality of the working environment. Before starting the machine, be sure to read this Manual carefully. Before starting the machine, check if relevant safety protection measures have been taken according to the Manual. Before starting the machine, watch the motor turning direction according to the instruction of arrow direction. START UP 1. To ensure satisfactory performance for Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference. SMT-20151207
GB-6066-DD AVANI Grinding Booth the Welding Booth, please confirm the air volume, power and the matching table of the Welding Booth. 2. Connect power according to electrical installation procedure after installing the Welding Booth and the table. Disconnect power according to electrical installation procedure when the machine is not used. 3. The Welding Booth shall be turned on and off by pushing I/O button. Under normal operation status, use such I/O button. Unpacking The machine should be unpacked carefully. Check if the machine and components are consistent with those indicated in the Parts List. If any doubt arises or when the components are incomplete, contact your dealer. Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference. SMT-20151207
AVANI Grinding Booth GB-6066-DD Dimensions (in mm/inches) fixed louver Backdraft Double Door right wall: 1/2 closed front fixed louver plug receptacle 110v, 1ph: -has 2 plug connections Reference: GB-6066-DD Submittal Drawing 2015.10.22 Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference. SMT-20151207
GB-6066-DD AVANI Grinding Booth Parts Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference. SMT-20151207
AVANI Grinding Booth GB-6066-DD Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference. SMT-20151207
AVANI Grinding Booth GB-6066-DD Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference. SMT-20151207
GB-6066-DD AVANI Grinding Booth Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference. SMT-20151207
GB-6066-DD AVANI Grinding Booth Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference. SMT-20151207
GB-6066-DD AVANI Grinding Booth Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference. SMT-20151207
GB-6066-DD AVANI Grinding Booth Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference. SMT-20151207
GB-6066-DD AVANI Grinding Booth Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference. SMT-20151207
GB-6066-DD AVANI Grinding Booth Contact Information Avani Environmental Intl. Inc. 95 Cypress Drive, Youngsville, NC 27596 Email: info@avanienvironmental.com www.avanienvironmental.com Customer Service: info@avanienvironmental.com Tel: 919-570-2862 ext. 5162 Engineering Service: engineering@avanienvironmental.com Tel: 919-570-2862 ext. 5169 Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference. SMT-20151207
WB-1055 AVANI Welding Booth Customer: Customer PO#: 11305 AVANI SO#: Serial #: 153901~153918 Ship Date / Install Date: Tested By: Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference. SMT-20141016
WB-1055 AVANI Welding Booth TABLE OF CONTENT Submittal Dimensions (in mm/inches)... 3 Assembly Label Configuration... 4 Assembly Procedure... 6 Assembly Hardware... 8 Repair Parts List... 15 Contact Information... 16 2
WB-1055 AVANI Welding Booth Submittal Dimensions (in mm/inches) Revisions WB-1055 WELDING BOOTH SPECIFICATIONS Standard * Panel Construction: 12 Gauge welded steel * Three piece construction (2) side panels (1) back panel * 2" Square Stock support * Fixed rear shelf: 60"W x 20"D with 2" Hole (located as per drawing) * Walk-in booth * Powder coated Avani Blue * Adjustable feet with mounting plate * Welding curtain rod * Adjustable rear shelf * Arm 1620 : 6" x 7' Hanging Fume Arm Note: Booths can be mounted back to back and/or side to side and based on configuration will share common panels. Options Available Date AVANI ENVIRONMENTAL INTL. INC. Sales Department 2015.08.10 *** ** WB-1055 with Arm 1620 95 Cypress Drive (919) 570-2862 Youngsville, NC 27596 The drawings, AutoCAD, 3-D Models, and specifications are the property of Avani info@avanienvironmental.com Environmental Intl. Inc. (AE) and may not be reproduced, distributed, modified, or otherwise used, except provided herein, without the express written permission of AE. Scale 1 = 30 WB-1055 Name 3
WB-1055 AVANI Welding Booth Assembly Label Configuration Revisions AVANI ENVIRONMENTAL INTL. INC. 95 Cypress Drive Youngsville, NC 27596 Sales Department (919) 570-2862 info@avanienvironmental.com PRELIMINARY Date 2015-08-10 Name *** REVISION A The drawings, AutoCAD, 3-D Models, and specifications are the property of Avani Environmental Intl. Inc. (AE) and may not be reproduced, distributed, modified, or otherwise used, except provided herein, without the express written permission of AE. LAYOUT FOR KELLY WALSH Scale 1 = 40 LAYOUT KELLY WALSH PAGE 1 OF 1 4
WB-1055 AVANI Welding Booth Revisions AVANI ENVIRONMENTAL INTL. INC. 95 Cypress Drive Youngsville, NC 27596 Sales Department (919) 570-2862 info@avanienvironmental.com PRELIMINARY Date 2015-08-10 Name *** REVISION A The drawings, AutoCAD, 3-D Models, and specifications are the property of Avani Environmental Intl. Inc. (AE) and may not be reproduced, distributed, modified, or otherwise used, except provided herein, without the express written permission of AE. LAYOUT FOR KELLY WALSH Scale LAYOUT KELLY WALSH 1 = 40 PAGE 1 OF 1 5
WB-1055 AVANI Welding Booth Assembly Procedure 1. 3. 2. 4. DO NOT FASTEN BOLTS ON BOOTH BEFORE ADJUSTING WELDING BOOTH FEET TO LEVEL OUT BOOTH WITH GROUND. 6
WB-1055 AVANI Welding Booth 5. 7. 6. 8 DO NOT FASTEN BOLTS ON BOOTH BEFORE ADJUSTING WELDING BOOTH FEET TO LEVEL OUT BOOTH WITH GROUND. 5. 7
WB-1055 AVANI Welding Booth 9. 11. 10. DO NOT FASTEN BOLTS ON BOOTH BEFORE ADJUSTING WELDING BOOTH FEET TO LEVEL OUT BOOTH WITH GROUND. 8 12.
WB-1055 AVANI Welding Booth 13. 14. DO NOT FASTEN BOLTS ON BOOTH BEFORE ADJUSTING WELDING BOOTH FEET TO LEVEL OUT BOOTH WITH GROUND. 9
WB-1055 AVANI Welding Booth BP A PART(Curtain Rod) AS SP TA DO NOT TIGHTEN BOLTS ON BOOTH BEFORE ADJUSTING WELDING BOOTH FEET TO LEVEL OUT BOOTH WITH GROUND. 10
WB-1055 AVANI Welding Booth Installations for WB-1055 (booth side to side). Take out the number: BP and SP. Join Back Panel(BP) and Side Panel(SP) together with: Part name Description Photos Q ty Hex Screw 5/16 x 3 4 Flat Washer 5/16 x OD23 x 2T 4 (*) Hardware item at similar spec available locally. 11
WB-1055 AVANI Welding Booth Installations for WB-1055 (booth side to side). Take out the number: TA and BP and SP. Join Adjustable Table (TA) to Back Panel (BP) and Side Panel (SP)together with: Part name Description Photos Q ty Hex Bolt 5/16 x 3/4 8 Flat Washer 5/16 x OD23 x 2T 8 (*) Hardware item at similar spec available locally. 12
WB-1055 AVANI Welding Booth Installations for WB-1055 (booth side to side). Take out the number: AS. Join Arm Support (AS) to Back Panel (BP) together with: Part name Description Photos Q ty Hex Bolt 5/16 x 3 1 Flat Washer 5/16 x OD23 x 2T 2 Hex Nut 5/16" 1 (*) Hardware item at similar spec available locally. 13
WB-1055 AVANI Welding Booth Assembly Hardware 14
WB-1055 AVANI Welding Booth Repair Parts List Repair Parts List for Welding Booth Reference Number Description Part Number Quantity 1 Back Panel A02-01-WB-5x5S-1 1 2 Side Panel A02-01-WB-5x5S-2 2 3 Hex Screw 5/16"*3" A02-01-WB-5x5S-3 4 4 Flat Washer 5/16"xOD23x2t A02-01-WB-5x5S-4 4 5 Adjustable Feet M16*100 A02-01-WB-5x5S-5 4 6 Hex Nut M16 A02-01-WB-5x5S-6 4 7 Curtain Bar (long) A02-01-WB-5x5S-7 1 8 Phillips Head Sheet Metal Screw 1/4"*3/4" A02-01-WB-5x5S-8 1 9 Curtain Bar (short) A02-01-WB-5x5S-9 1 10 Hex Screw 5/16"*3/4" A02-01-WB-5x5S-10 2 11 Flat Washer 5/16"xOD23x2t A02-01-WB-5x5S-11 2 12 TABLE A02-01-WB-5x5S-12 1 13 Knob Screw 5/16"*3/4" A02-01-WB-5x5S-13 1 14 Hex Screw 5/16"*3/4" A02-01-WB-5x5S-14 8 15 Flat Washer 5/16"xOD18x2t A02-01-WB-5x5S-15 8 16 Arm Support A02-01-WB-5x5S-16 1 17 Hex Screw 5/16"*3/4" A02-01-WB-5x5S-17 4 18 Flat Washer 5/16"xOD23x2t A02-01-WB-5x5S-18 4 19 HOOK A02-01-WB-5x5S-19 2 20 Hex Screw 5/16"*3/4" A02-01-WB-5x5S-20 4 21 Flat Washer 5/16"xOD23x2t A02-01-WB-5x5S-21 4 15
WB-1055 AVANI Welding Booth Contact Information Avani Environmental International Inc. 95 Cypress Drive, Youngsville, NC 27596 Email: info@avanienvironmental.com www.avanienvironmental.com Customer Service: info@avanienvironmental.com Tel: 919-570-2862 ext.5167 Engineering Service: enginnering@avanienvironmental.com Tel: 919-570-2862 ext.5162 16
Avani Environmental Intl.,Inc. 95 Cypress Drive Youngsville, NC 27596 Ph: 919-570-2862 E-mail: info@avanienvironmental.com www.avanienvironmental.com Owners Manual Hanging Fume Arms Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference. 032211 AV-AM-003 Rev.0 12/23/2013
Avani Environmental Intl.,Inc. 95 Cypress Drive Youngsville, NC 27596 Ph: 919-570-2862 E-mail: info@avanienvironmental.com www.avanienvironmental.com Caution: The fume arm spring has been pre-set at the factory and is under high tension. Do not attempt to make any type of adjustment to or manipulation of the spring as it can cause bodily injury. Please contact Avani Environmental if you have any questions related to the spring and/or its adjustment. TABLE OF CONTENTS Optional Light Kit assembly... 3 Grounding Fume Arms... 7 Wall Mount Bracket Installation... 9 Wall Mount Bracket Specifications...11 Maintenance Instructions... 16 Parts List.. 15 Contact Information..16 032211 AV-AM-003 Rev.0 12/23/2013
Avani Environmental Intl.,Inc. 95 Cypress Drive Youngsville, NC 27596 Ph: 919-570-2862 E-mail: info@avanienvironmental.com www.avanienvironmental.com LIGHT KIT ASSEMBLY (Optional) 1 Use Phillips Head Screwdriver to remove (2) 3/16"*5/8" Phillips Head Screws. Light Cover Working Light Fixing Plate 2 Take off the Light Cover and Working Light Fixing Plate. Drill a 3/8 Hole in the hood, located midway in the angled section of the hood. Install a 5/16 ID rubber grommet in this hole. 3. Cut light wires to a length of 4 long and strip insulation back approximately 1/4'. 4. Locate power cord and strip outer insulation back about 4. Strip insulation from individual wires back about ¼. 5. Feed power cord through the hood grommet from the outside and then route through the light hole. 6. Using a wire nut connector attach the white power wire to one of the light wires. Locate toggle switch and wire nut connect the remaining wire off of the light to one of the wires on the toggle switch. Wire nut connect the black 032211 AV-AM-003 Rev.0 12/23/2013
Avani Environmental Intl., Inc. 95 Cypress Drive Youngsville, NC 27596 Ph: 919-570-2862 E-mail: info@avanienvironmental.com www.avanienvironmental.com power wire to the remaining wire on the toggle switch. Install a spade terminal on the green (ground) wire coming from the power cord. 7. Remove the flex hose from the hood end at both the hood and tube. 8. Loosen any one of the 10mm. bolts on the inside of the hood. 9. Insert the spade connector from the ground wire under the bolt and tighten. 10. Drill a 1/2 hole in the air diverter plate outside of the light fixing plate area. 11. Install the toggle switch in this hole and tighten. 12. Then push the Light and Light Cord through the air diverter plate. 13. Insert the light into the air diverter plate. 14. Install glass cover plate over light. (remove plexi-glass cover if already in 4 SMT-081127
Avani Environmental Intl., Inc. 95 Cypress Drive Youngsville, NC 27596 Ph: 919-570-2862 E-mail: info@avanienvironmental.com www.avanienvironmental.com place) 17. Plug in wire to the appropriate power source (110Volt) to verify that the light is working. 18. Route the wire along the arm and connect to the tube using zip ties. Leave sufficient slack at each joint. 15. Install the fixing plate and then tighten the (2) 3/16 *5/8 Phillips Head Screws that originally locked the fixing plate. 16. Re-attach hose. 5 SMT-081127
Avani Environmental Intl., Inc. 95 Cypress Drive Youngsville, NC 27596 Ph: 919-570-2862 E-mail: info@avanienvironmental.com www.avanienvironmental.com Light Kit Parts List 5. Toggle switch- 125 volt 10amp (PN 0811) 1. Power cord with plug (120 volt 15 ) 2. Aluminum Lamp Housing & Lamp Base 3. Glass lamp cover plate (2 ) 4. Lamp (120volt-35 watt- GU10) 6. Rubber Grommet 5/8 OD-3/8 ID (1) PN 55055 7. Wire Nuts (3) Blue 8. Spade Connector (1) (16-14AWG Blue) 9. Heavy Duty Cable Ties 36 (2) 6 SMT-081127
Avani Environmental Intl.,Inc. 95 Cypress Drive Youngsville, NC 27596 Ph: 919-570-2862 E-mail: info@avanienvironmental.com www.avanienvironmental.com GROUNDING FUME ARMS (If Desired) Fume arms have connectivity between the swivel base and the pipe closest to the hood. Grounding is achieved by mounting a grounding strap between the swivel base and the nearest off-arm grounding source and also between the hood and the nearest bolt on the arm pipe (see below). Ground strap required Between hood and bolt On joint Grounding strap required between swivel base and nearest off arm ground source. 7 SMT-081127
Avani Environmental Intl.,Inc. 95 Cypress Drive Youngsville, NC 27596 Ph: 919-570-2862 E-mail: info@avanienvironmental.com www.avanienvironmental.com Grounding strap locations: 8 SMT-081127
Avani Environmental Intl.,Inc. 95 Cypress Drive Youngsville, NC 27596 Ph: 919-570-2862 E-mail: info@avanienvironmental.com www.avanienvironmental.com Wall Mount Bracket Installation Wall Mount Bracket, Flanged Pipe, Swivel Base 1. Using the appropriate hardware, secure the wall mount bracket using the pre-drilled holes in the bracket. 2. Insert the flanged pipe through the wall mount bracket from the bottom side (see photo below). 032211 AV-AM-003 Rev.0 12/23/2013
Avani Environmental Intl.,Inc. 95 Cypress Drive Youngsville, NC 27596 Ph: 919-570-2862 E-mail: info@avanienvironmental.com www.avanienvironmental.com 3. Install the fume arm swivel base, with the hardware supplied with the arm, from the bottom side. This secures the flanged pipe into the wall mount bracket. 10 SMT-081127
Avani Environmental Intl.,Inc. 95 Cypress Drive Youngsville, NC 27596 Ph: 919-570-2862 E-mail: info@avanienvironmental.com www.avanienvironmental.com 11 SMT-081127
Avani Environmental Intl.,Inc. 95 Cypress Drive Youngsville, NC 27596 Ph: 919-570-2862 E-mail: info@avanienvironmental.com www.avanienvironmental.com WALL MOUNT BRACKET SPECIFICATIONS 4 Wall Bracket: 5 Wall Bracket: 12 SMT-081127
Avani Environmental Intl.,Inc. 95 Cypress Drive Youngsville, NC 27596 Ph: 919-570-2862 E-mail: info@avanienvironmental.com www.avanienvironmental.com 13 SMT-081127
Avani Environmental Intl.,Inc. 95 Cypress Drive Youngsville, NC 27596 Ph: 919-570-2862 E-mail: info@avanienvironmental.com www.avanienvironmental.com 6 Wall Bracket: 8 Wall Bracket: 032211 AV-AM-003 Rev.0 12/23/2013
Avani Environmental Intl.,Inc. 95 Cypress Drive Youngsville, NC 27596 Ph: 919-570-2862 E-mail: info@avanienvironmental.com www.avanienvironmental.com 15 SMT-081127
Avani Environmental Intl.,Inc. 95 Cypress Drive Youngsville, NC 27596 Ph: 919-570-2862 E-mail: info@avanienvironmental.com www.avanienvironmental.com MAINTENANCE INSTRUCTIONS Hood or arm will not stay in the required position: 1) Adjust the External Joints by tightening the bolts with (2) wrenches (as shown in Fig. 1). This increases the force on the friction discs (see Fig. 2). Fig. 1 Fig. 2 Arm does not turn with ease: a. Apply a medium duty grease to grease fitting on side of swivel base. Continue to grease at regular intervals to ensure free movement of arm. See photo below: 032211 AV-AM-003 Rev.0 12/23/2013
Avani Environmental Intl.,Inc. 95 Cypress Drive Youngsville, NC 27596 Ph: 919-570-2862 E-mail: info@avanienvironmental.com www.avanienvironmental.com 032211 AV-AM-003 Rev.0 12/23/2013
Avani Environmental Intl.,Inc. 95 Cypress Drive Youngsville, NC 27596 Ph: 919-570-2862 E-mail: info@avanienvironmental.com www.avanienvironmental.com Contact Information Avani Environmental International Inc. 95 Cypress Drive, Youngsville, NC 27596 Email: info@avanienvironmental.com www.avanienvironmental.com Customer Service: info@avanienvironmental.com Tel: 919-570-2862 ext.5167 Engineering Service: enginnering@avanienvironmental.com Tel: 919-570-2862 ext.5162 032211 AV-AM-003 Rev.0 12/23/2013