BSSLED INTRODUCTION BSSLED is based in NSW, Australia and Northumberland in the UK. We specialise in the manufacture of industrial and commercial LED Luminaries and bespoke LED Lighting solutions. Established in 2010 at the start of the LED lighting revolution, we are one of the few true manufacturers of LED Luminaries. We are certified to BSI ISO 9001 and our in house manufacturing facilities include: Surface Mount Technology Pick and Place Line for LED and electronic component assembly. High speed CNC machining centres Fully automated Amada CNC punch press Amada CNC press brake Our products are tested and approved to European Safety Standards by the UK Lighting Industry Association Laboratory in Telford, England and with EMC Aspects laboratories in NSW 9/3 Jones Street Pyrmont NSW 2009 02 80845150 About BSSLED info@bssled.com.au
DESIGN AND DEVELOPMENT Our technical design and development team work closely with Osram Engineers to ensure we remain at the forefront of LED technology supplying the best products available. At BSSLED we fully understand what is needed to manufacture a range of quality products that will perform as intended. All BSSLED products have a full comprehensive 5 year warranty. We recognise that the Australia region has some potentially challenging technical considerations with some harsh environmental conditions and high ambient temperatures. BSSLED has specifically designed some patented LED external products with sun protection covers and forced air cooling using venturi forced air flow. These product modifications will substantially extend the life of our LED products. We have extensive testing at ambient 50 degrees centigrade to ensure our products will be specifically suited to Australian conditions. Drivers are supplied by either Osram GmbH or Lumotech in the Netherlands We manufacture using Osram Opto Electronics LED which have proven reliable life time data giving light outputs in excess of 95% after 50,000 hours use.
HIGH BAY LED LIGHT 100-150w A proven replacement for Metal Halide/ SON fi ttings for mounting heights over 8 meters DATA SHEET 1 Designed and Manufactured England and Australia, these LED High Bays have been designed to directly replace 250 and 400 Watt Metal Halide/SON fi ttings using the proven Osram Oslon square LED and Osram OTI drivers Available in a choice of IP options to suit most environments, the LED Low Bay has a wide range of applications. By switching to LED High Bay lighting payback times can be well under two years. Minimum energy saving of 65% Zero maintenance costs Osram LED, Osram drivers Instant start-up Powder coated fi nish Manufactured in the UK and Australia 5 Year Warranty with insurance backed option Simple installation Environmentally friendly Full BS EN European safety approval 9/3 Jones Street Pyrmont NSW 2009 *Model shown includes PIR/Dimming sensor 02 80845150 info@bssled.com.au LED High Bay
SPECIFICATION LED FLOODLIGHT RANGE Part Number Uses Light Source LED Driver Lumen Output Beam Angle CRI Approvals Dimming Dimensions Weight Coating Protection Maintenance Requirements Extra Options 61025-61056 Factory and warehouse lighting Osram Oslon Square LED Osram OTE / OTI (depending on model) 110+ lumens per watt 60 Degrees (others available) >85 BS EN60598, BS EN61347, BS EN55015, LIA Verified Yes 610mm x 310mm x 200mm 11kg Powder coating to any colour IP20 (IP65 versions available) None Perspex / Polycarbonate diffusers 3hr Emergency battery back up PIR/ Daylight dimming sensors Custom cable lengths and mounting options
LOW BAY LED LIGHT 100/135W A proven replacement for Metal Halide/ SON fittings for mounting heights up to 8 meters DATA SHEET 2 Designed and Manufactured in England and Australia, these LED Low Bays have been designed to directly replace 250 and 400 Watt Metal Halide/SON fittings. Available in a choice of IP options to suit most environments, the LED Low Bay has a wide range of applications. By switching to LED Low Bay lighting payback times can be well under two years. Minimum energy saving of 65% Zero maintenance costs Osram LED, Osram drivers Instant start-up Powder coated finish Manufactured in the UK and Australia 5 Year Warranty with insurance backed option Simple installation Environmentally friendly Full BS EN European safety approval 9/3 Jones Street Pyrmont NSW 2009 02 80845150 info@bssled.com.au LED Low Bay
SPECIFICATION LED LOW BAY RANGE Part Number Uses Light Source LED Driver Lumen Output Beam Angle CRI Approvals Dimming Dimensions Weight Coating Protection Maintenance Requirements Extra Options 80001-100w, 80011-135w (None dimmable models) Factory and warehouse lighting Osram Duris E5630 JDSI LED Osram OTE / OTI (depending on model) 100+ lumens per watt 120 Degrees >85 BS EN60598, BS EN61347, BS EN55015, LIA Verifi ed Available on request 610mm x 310mm x 200mm 11kg Powder coating to any colour IP20 (IP65 versions available) None Perspex / Polycarbonate diffusers 3hr Emergency battery back up PIR/ Daylight dimming sensors Custom cable lengths and mounting options
100W - 600W LED FLOODLIGHT RANGE A direct replacement for Metal Halide/SON Floodlights DATA SHEET 3 Designed and manufactured in England and Australia, our LED floodlights come with a range of lens options to suit all applications. Our range of LED Floodlights, from 100 to 600 Watt, have been designed to offer excellent performance, reduced energy savings and a maintenance free solution The LED Flood Lights can be wall, column or bracket mounted and are available in a range of colours to suit your corporate image. Minimum energy saving of 65% Zero maintenance costs Osram LED, Osram drivers Instant start-up Hard Anodised/ Powder coated fi nish Manufactured in the UK and Australia 5 Year Warranty with insurance backed option Simple installation Environmentally friendly Full BS EN European safety approval 9/3 Jones Street Pyrmont NSW 2009 02 80845150 info@bssled.com.au LED Floodlight Range
SPECIFICATION LED FLOODLIGHT RANGE Part Number Uses Light Source LED Driver Lumen Output Beam Angle CRI Approvals Dimming Dimensions Weight Coating Protection Maintenance Requirements Extra Options 61202-61211 External Factory Lighting, Security Lighting, Osram Oslon square Osram OTE / OTI 118 Lumens Per Watt 60 Degrees (other beam angles available on request) >72 BS EN60598, BS EN61347, BS EN55015, LIA Verified Available on request 220mm H/ 250mm D/ 330mm W (150w) 9-32kg Powder coating/ hard anodising IP65 None Sun Covers Emergency battery back up Custom colours
DATA SHEET 4 IP65 LED LOW BAY Up to 100W A direct replacement for Metal Halide/SON Floodlights IP rated as dust tight and protected against heavy seas or powerful jets of water The IP66 LED Low bay is a maintenance free, self contained direct LED replacement for water proof Metal halide/ SON fi ttings. Manufactured in England and Australia using Osram LED technology, it carries a 5 year warranty and can be combined with numerous different sensor options to provide high energy savings and low payback times. Minimum energy saving of 65% Zero maintenance costs Osram LED Instant start-up Powder coated and hard anodised fi nish Manufactured in the UK and Australia 5 Year Warranty with insurance backed option Simple installation Environmentally friendly Full BS EN European safety approval 9/3 Jones Street Pyrmont NSW 2009 02 80845150 info@bssled.com.au IP65 LED Low Bay
SPECIFICATION IP66 LED FLOODLIGHT Part Number Uses Light Source LED Driver Lumen Output Beam Angle CRI Approvals Dimming Dimensions Weight Coating Protection Maintenance Requirements Operating temperature range 61601 General wet/ dirty environment lighting 312 X Osram 5630 Duris E5 Meanwell HLG-100H 36A 12000 Lumens @ 5000K (120 Lumens per watt) 120 Degrees >85 BS EN60598-2-2:2012, BS EN61347-1:2008, LIA Verified 0-100K ohm/ 0-10V resistance dimming 315mm W / 190mm D / 175mm H 4.5kg Powder coating/ hard anodising IP65 None -20 to + 50 Degrees C
DATA SHEET 5 IP65 LINEAR LED LIGHT Designed and manufactured in the England and Australia, a high quality, maintenance free range of LED Linear luminaries to replace flourescent tubes The IP65 Linear fitting is the perfect replacement for non-corrosive fluorescent fittings giving a 55% energy saving and maintenance free solution. Constructed from 6016 Aluminium Anodised to BS 7599 Silver with high impact polycarbonate diffusers and polycarbonate or aluminium endcaps. Available as standard in 300mm, 600mm, 900mm, 1200mm, 1500mm & 1800mm Lengths and with optional PIR, daylight dimming sensors and 3 hr emergency back up. Made using proven Osram LED s and drivers and with a 5 year warranty Fixing options allow installation fl ush to ceiling using custom brackets, eye hooks or cable tray connections. Minimum energy saving of 55% Zero maintenance costs Osram LED, Osram drivers Instant start-up Anodised finish Simple installation 5 Year Warranty with insurance backed option Manufactured in England and Australia Environmentally friendly Full BS EN European safety approval 9/3 Jones Street Pyrmont NSW 2009 02 80845150 info@bssled.com.au Linear Light
SPECIFICATION IP65 LINEAR LED LIGHT Part Number Uses Light Source LED Driver Lumen Output Beam Angle CRI Approvals Dimming Dimensions Weight Coating Protection Maintenance Requirements Extra Options 61082-61086 Industrial Applications, Car park lighting Osram 5630 Duris E5 Osram OTE/ OTI Range ~100 Lumens per watt >120 Degrees >85 BS EN60598, BS EN61347, BS EN55015 Optional DALI Dimming 90mm W/ 80mm D/ 320mm - 1820mm L 2-10 kg Hard anodising IP65 None PIR/ daylight dimming Emergency battery back up Custom colours/ Lengths
DATA SHEET 6 200mm LED DOWNLIGHT35W Specifically designed to replace 70w commercial fluorecent downlights Certified 3430 Lumens giving 98 lumens per watt Manufactured in England and Australia, the 35w 3430 Lumen LED Downlight is designed to replace conventional fluorescent downlights and offers in excess of 50% energy savings. Using high quality Osram Duris E LED s and the Osram OT Range of LED Drivers, the 35w LED Downlight comes with a full 5 year warranty. Minimum energy saving of 65% Zero maintenance costs Osram LED Osram drivers Die cast aluminium housing Powder coated finish Manufactured in the UK 5 Year Warranty with insurance backed option Simple installation Environmentally friendly Full European/Australian safety approval
D ATA SHEET 6 Specifications Uses Light Source Power Consumption Light Output Colour Temperatures Colour Rendering Beam Angle LED Driver Input Voltage Overall Diameter Cut Out Required Minimum Ceiling Depth Weight Offices, Shopping Centres, Hotels etc 100 x Osram Duris E5 LEDs on Aluminium PCB 35 watts 3430 Lumens 3000 Kelvin 4000 Kelvin 5000 Kelvin Minimum 85 100 Degrees Osram OTE 35 Optional Dali Dimmable 220 240 Volts AC 50/60 Cycles 230mm 195mm 140mm 1 KG Maintenance Requirements: Warranty: Approvals: NONE 5 Years BS EN60598-2-2:2012 BS EN61347-1:2008 CISPR 15:2011 9/3 Jones Street Pyrmont NSW 2009 T: 02 80845150 E: info@bssled.com.au
All-In-One LED Downlight PL001-10W All 12 products in one box! 4 fascia finishes plus 3 colour temperatures = 12 products in one box 10W LED downlight 4 alternative fascias included 3 colour temperature settings Dimmable with trailing edge dimmers Easy plug-and-play wiring connections Average life 50,000 hours Reduce your stock levels Fast installation 004-0016 verified by New Technology 3 colour temperature settings BRASS WHITE Warm White 3,000K Cool White 4,000K Daylight 6,000K CHROME BRUSHED STEEL BSS LED Australia Pty Ltd 9/3 Jones Street, Pyrmont, NSW, 2009 T 02 80845150 E stephen.pearce@bssled.com W bssled.com.au UK Distributor Proven energy saving lighting solutions
PL001-10W Replaces Part Code Trade Price PL001-10W $TBD Luminescence Technical Efficiency Light colour 3000 K / 4000 K / 6000 K Ra, Consistency Ra80, 6 SDCM Luminous flux WW 615lm CW 740lm 649lm Beam angle, light intensity 40, 2185 cd Accent Lighting Yes Warm up time Instant Dimmable Yes (Max. 20 fittings) Power input (50-60Hz AC) 10W (230V) Power factor & Current 0.9, 285mA Lamp type Britesource LED - COB Working temperature -30 c, +35 c Construction Aluminium heat sink, steel fascia IP rating IP65 fascia only Energy Efficiency Label A+ Ec (Energy consumption) 10 kwh / 1000 h Lifetime 50,000 h Warranty 5 years Switching cycles 100,000 145mm 50mm min. void space verified by 110mm Plug-and-play connectors included 004-0016 65mm cut out 80mm or 100mm WEEE BSS LED Australia Pty Ltd 9/3 Jones Street, Pyrmont, NSW, 2009 T 02 80845150 E stephen.pearce@bssled.com W bssled.com.au UK Distributor Proven energy saving lighting solutions
DATA SHEET 8 LED FORECOURT & CANOPY An intelligent replacement with PIR/Daylight dimming for forecourt lighting. Our Forecourt light directly replaces the old style metal halide fittings with high performance Osram LEDs and can be fitted with daylight dimming and occupancy sensing for maximum energy savings. As a vehicle approaches your petrol station it switches to a higher level of lighting, providing the motorists with the visual security they require. When there are no customers on the forecourt the light levels are dimmed, saving energy, but at the same time, ensuring sufficient lighting for security and safety. These LED lights produce a good quality white light which provides better CCTV images and security. Minimum energy saving of 65% Zero maintenance costs Optional PIR/Daylight dimming sensors Osram LED, Osram drivers Instant start-up Aluminium high output reflectors Powder coated finish Manufactured in the England and Australia 5 Year Warranty with insurance backed option Simple installation Environmentally friendly Full European safety approval
DATA SHEET 8 Specifications Uses Light Source Forecourt Canopy Lighting 60-72 Piece Osram Oslon Square Ledil Lens Beam Angle LED Driver Input Voltage 60 (Other options are available) Osram 110v 260v AC Colour Temperatures Colour Rendering Index Lumen Output 5000k [other colour temperatures available] 85 Minimum 11,800 Lumens @ 5000k 100 Watts Luminaire Specification Weight Coating Protection 0-100K ohm resistance dimming 4 kgs Powder Coated IP65 Options PIR/Daylight Dimming Sensors Frame size to suit all retrofit applications Forecourt & Canopy Range 61500 100w LED forecourt light, 60 degree lens 61501 100w LED forecourt light, 60 degree lens, CP daylight/pir sensor >100w Please contact us to discuss. An intelligent replacement with PIR/Daylight Dimming for forecourt lighting Maintenance Requirements: Warranty: Approvals: NONE 5 Years BS EN60598-2-2:2012 BS EN61347-1:2008 CISPR 15:2011 9/3 Jones Street Pyrmont NSW 2009 T: 02 80845150 E: info@bssled.com.au
DATA SHEET 9 www.bssled.com 200mm LED DOWNLIGHT15W Specifically designed to replace commercial fluorecent downlights Certified 1478 Lumens giving 98 lumens per watt Manufactured in Northumberland, England, the 15w 1500 Lumen LED Downlight is designed to replace conventional fluorescent downlights and offers in excess of 50% energy savings. Using high quality Osram Duris E LED s and the Osram OT Range of LED Drivers, the 15w LED Downlight comes with a full 5 year warranty. Minimum energy saving of 65% Zero maintenance costs Osram LED Osram drivers Die cast aluminium housing Powder coated finish Manufactured in the UK 5 Year Warranty with insurance backed option Simple installation Environmentally friendly Full European safety approval
DATA SHEET 9 www.bssled.com Specifications Uses Light Source Power Consumption Light Output Colour Temperatures Colour Rendering Beam Angle LED Driver Input Voltage Overall Diameter Cut Out Required Minimum Ceiling Depth Weight Offices, Shopping Centres, Hotels etc 50 x Osram Duris E5 LEDs on Aluminium PCB 15 watts 1478 Lumens 3000 Kelvin 4000 Kelvin 5000 Kelvin Minimum 85 100 Degrees Osram OTE 25 Optional Dali Dimmable 220 240 Volts AC 50/60 Cycles 230mm 195mm 140mm 1 KG Maintenance Requirements: Warranty: Approvals: NONE 5 Years BS EN60598-2-2:2012 BS EN61347-1:2008 Unit 5 Ashwood Business Park Ashington Northumberland NE63 0XD T: 01670 432 400 E: info@bssled.com www.bssled.com
DATA SHEET 9 LED HIGH BAY PENDANT150W Designed and proven replacement for 400 watt Metal Halide / SON high bays for mounting heights of 8m and above The LED High Bay also utilises lens control providing accurate distribution of light. It is available with a range of sensor controls to further enhance energy savings giving both daylight dimming and occupancy detection. Remote programming is conducted from ground level for ease of commissioning. Minimum energy saving of 65% Zero maintenance costs Optional PIR/Daylight dimming sensors Osram LED, Meanwell drivers Instant start-up Aluminium high output reflectors Powder coated finish Manufactured in the UK 5 Year Warranty with insurance backed option Simple installation Environmentally friendly Full European safety approval
DATA SHEET 9 Specifications Uses Light Source Factory Lighting Warehouse Lighting Citizen CLL050 COB LED Dimming 0-10v Analogue 0-100K ohm resistance dimming Optional Dali Interface Colour Temperatures Colour Rendering Index Lumen Output Beam Angle LED Driver Input Voltage 5000k [other colour temperatures available] 65 Minimum 13,500 Lumens @ 5000k 150 Watts 60 degrees Meanwell HLG185-54B 85v 260v AC Luminaire Specification Weight Coating Reflector Protection: Options 400mm Diameter 440mm Tall 9 kgs Mill Finished Aluminium Polished Aluminium reflector IP54 3hr Emergency Back up PIR/Daylight Dimming Sensor Clear Diffuser LED Pendant High Bay 61405 150w LED pendant high bay. Maintenance Requirements: Warranty: Approvals: NONE 5 Years BS EN60598-2-2:2012 BS EN61347-1:2008 CISPR 15:2011 9/3 Jones Street Pyrmont NSW 2009 T: 02 80845150 E: info@bssled.com.au
DATA SHEET 10 LED CARPARK LIGHT150W -19200 Lumen CERTIFIED 128 LUMEN PER WATT Designed to offer excellent performance, reduced energy savings and a maintenance free solution with a 5 year warranty The LED Carpark Light can be wall or column mounted. Minimum energy saving of 65% Zero maintenance costs Using a range of secondary lenses light can be directed exactly where required with minimum light pollution. Osram LED, Osram drivers Instant start-up Powder coated finish Manufactured in the UK 5 Year Warranty with insurance backed option Simple installation Environmentally friendly Full European safety approval
D ATA SHEET 10 Specifications Uses Light Source Colour Temperatures Colour Rendering Index Lumen Output Street Lighting Car park Lighting General External Lighting Road way lighting 72 Piece Osram Oslon Square 150W 6500k [other colour temperatures available] 85 Minimum 18, 800 lumens @ 6500k 150 watts Beam Angle LED Driver Input Voltage Luminaire Specification Weight Coating Protection Glass Options Asymmetric or 60 Degrees Osram OTI 150 180v 260v AC Aluminium 9 kg Powder Coated IP67 5mm Tempered Marine Coating Maintenance Requirements: Warranty: Approvals: NONE 5 Years BS EN60598-2-2:2012 BS EN61347-1:2008 9/3 Jones Street Pyrmont NSW 2009 T: 02 80845150 E: info@bssled.com.au
100-150w NARROW BEAM LED HIGH BAY A proven replacement for Metal Halide/ SON fittings for mounting heights over 8 meters specifi cally designed for areas with high and narrow racking. Designed and Manufactured in England and Australia, the high narrow lensed LED high bay has been specifi cally designed to meet the needs of warehousing and logistics facilities having aisles or racking areas. Using secondary optics fitted directly over the LED s, the luminaire produces a long narrow beam angle ideally suited for narrow isles, reducing the amount of fittings required Secondary optics are very effective at directing the light to exactly where you require it without generating stray light or glare. DATA SHEET 11 Minimum energy saving of 65% Zero maintenance costs Osram LED, Osram drivers Instant start-up Powder coated fi nish Manufactured in the UK and Australia 5 Year Warranty with insurance backed option Simple installation Environmentally friendly Full BS EN European safety approval 9/3 Jones Street Pyrmont NSW 2009 02 80845150 info@bssled.com.au LED High Narrow *Model shown includes PIR/Dimming sensor
SPECIFICATION LED HIGH BAY RANGE Part Number Uses Light Source LED Driver Lumen Output Beam Angle CRI Approvals Dimming Dimensions Weight Coating Protection Maintenance Requirements Extra Options 61033-61064 Storage warehouse narrow isle lighting Osram Oslon Square LED Osram OTE / OTI (depending on model) 110+ lumens per watt HN >85 BS EN60598, BS EN61347, BS EN55015, LIA Verified Yes 610mm x 310mm x 200mm 11kg Powder coating to any colour IP20 (IP65 versions available) None Perspex / Polycarbonate diffusers 3hr Emergency battery back up PIR/ Daylight dimming sensors Custom cable lengths and mounting options
DATASHEET 12 LED STREET LIGHT 100W - 150W Certifi ed 118 Lumen per watt Designed to offer excellent performance, reduced energy savings and a maintenance free solution with a 5 year warranty The LED Street Light can be wall or column mounted. Using a range of secondary lenses light can be directed exactly where required with minimum light pollution. *Model pictures include sun cover. Minimum energy saving of 65% Zero maintenance costs Osram LED, Osram drivers Instant start-up Powder coated and hard anodised finish Manufactured in the England and Australia 5 Year Warranty with insurance backed option Simple installation Environmentally friendly Full BS EN European safety approval 9/3 Jones Street Pyrmont NSW 2009 02 80845150 info@bssled.com.au LED Street Light
SPECIFICATION LED STREET LIGHT Part Number Uses Light Source LED Driver Lumen Output Beam Angle CRI Approvals Dimming Dimensions Weight Coating Protection Maintenance Requirements Extra Options 61317/ 61318 Car park lighting/ roadway lighting Osram Oslon Square Osram OT150 DIM4 118 Lumens Per Watt Assymmetric or 60 Degrees >72 BS EN60598, BS EN61347, BS EN55015 Yes DALI or Step dimming, astronomic clock feature 400mm H/ 320mm W/ 120mm D 11kg Powder coating/ hard anodising IP65 None Sun covers Photocell switching Emergency battery back up Custom colours
Datasheet 13 LINEAR LED LIGHT Made in Australia, a low cost, maintenance free range of LED Linear luminaries to replace flourescent tubes The Linear fitting is the perfect replacement for fluorescent fittings giving a 55% energy saving and maintenance free solution. Available as standard in 1200mm or 1500mm Lengths and with optional PIR, daylight dimming sensors and 3 hr emergency back up. Made using proven Osram LED s and drivers and with a 5 year warranty Customisable fi xing options allow a great solution to retrofi t applications and ensure a quick and easy installation Minimum energy saving of 55% Zero maintenance costs Osram LED, Osram drivers Instant start-up Powder coated finish Made in Australia 5 Year Warranty with insurance backed option Simple installation Environmentally friendly Full BS EN European safety approval 9/3 Jones Street Pyrmont NSW 2009 02 80845150 info@bssled.com.au Linear Light
SPECIFICATION IP66 LINEAR LED LIGHT Part Number Uses Light Source LED Driver Lumen Output Beam Angle CRI Approvals Dimming Dimensions Weight Coating Protection Maintenance Requirements Extra Options 61704-5ft, 61605-5ft twin, 61706-4ft, 61707-4ft twin Flourescent tube replacemement Osram 5630 Duris E5 Osram OTE/ OTI Range ~100 Lumens per watt >120 Degrees >85 BS EN60598, BS EN61347, BS EN55015 Optional 100mm W/ 90mm D/ 1500-1800mm L 2-8kg Powder coating IP20 (depending on fi xing options) None PIR/ daylight dimming Emergency battery back up Custom colours/ Lengths
270W LED HIGH BAY A proven replacement for Metal Halide/ SON fittings for warehouses and factories that require very high light levels and have mounting heights of over 18 meters Designed and Manufactured in England and Australia, the high power LED high bay has been specifi ally designed to meet the needs of facilities needing very high light levels. DATA SHEET 14 Using secondary optics fitted directly over the LED s, the luminaire can direct light exactly where it needs to be, from a very high mounting height without generating stray light or glare. Minimum energy saving of 65% Zero maintenance costs Osram LED, Osram drivers Instant start-up Powder coated fi nish Manufactured in the UK and Australia 5 Year Warranty with insurance backed option Simple installation Environmentally friendly Full BS EN European safety approval 9/3 Jones Street Pyrmont NSW 2009 02 80845150 info@bssled.com.au LED 270w HB
SPECIFICATION LED HIGH BAY RANGE Part Number Uses Light Source LED Driver Lumen Output Beam Angle CRI Approvals Dimming Dimensions Weight Coating Protection Maintenance Requirements Extra Options 61100 Extra high warehouse and factory lighting 142 x Osram Oslon Square LED Osram OTI 110+ lumens per watt 30 or 60 degrees >85 BS EN60598, BS EN61347, BS EN55015, LIA Verified Yes 610mm x 610mm x 200mm 18kg Powder coating to any colour IP20 (IP65 versions available) None Perspex / Polycarbonate diffusers 3hr Emergency battery back up PIR/ Daylight dimming sensors Custom cable lengths and mounting options
DATA SHEET 15 LED LIGHT ENGINES There are many occasions when existing architectural light fittings can benefit from a bespoke LED light Engine application. Using our in-house technical expertise and pick and place production line, we can produce any type of LED Light engine from 5 watt LED lightboards to 200w LED light engines with bespoke heat sinks. We offer a range of Low Power LED Light Engines that are designed to replace existing fluorescent tubes or 600mm x 600mm office fittings. These boards can be linked together using onboard connectors and do not need additional thermal dissipation. Contact us for specific product information Minimum energy saving of 65% Zero maintenance costs Instant start-up Manufactured in the UK and Australia 5 Year Warranty with insurance backed option Simple installation Environmentally friendly Full European safety approval
D ATA SHEET 15 Standard Models LED Light Engine examples Model Size Lumens CCT Power 70010 275mm x 20mm 1100 4000k 8 watts 70020 550mm x 20mm 2200 4000k 16 watts 70030 275mm x 40mm 1100 4000k 8 watts 70040 550mm x 40mm 2200 4000k 16 watts Maintenance Requirements: Warranty: Approvals: NONE 5 Years BS EN60598-2-2:2012 BS EN61347-1:2008 9/3 Jones Street Pyrmont NSW 2009 T:02 80845150 E: info@bssled.com.au
Our Products What makes BSSLED products different to our competitors? The only industrial LED Lighting products to be LIA Verified by the UK Lighting Industry Association. See: http://www.lialabcert.org.uk This verifies our products meet European Safety Legislation and confirms our lumen output data. In addition all our products are further tested in Australia to conform to Australian standards. Manufactured in the UK and Australia using British or European components. Full 5 year product warranty including lumen depreciation. UK Electrical Safety Testing? Purchasing LED Lighting will save you at least 65% on your lighting energy costs and should give you many years of service. There are so many choices when it comes to purchasing LED Lighting and no one is going to tell you that their products is anything other than the best available. At BSSLED, we have chosen to have our products tested under the Lighting Industry Verified Scheme. This scheme tests our products to ensure safety and compliance with European Safety Legislation. It also measure lumen output [Light Output] and verifies our figures. BSSLED are currently the only Industrial LED Lighting Manufacturer to have received LIA Verified Status, not only does this confirm our commitment to safety and quality, but also asks the questions why none of our competitors have acheived this status? Why would you ever consider purchasing any electrical product without a valid Safety Test? Ask any of our previous customers what they think: There is nothing better than talking to someone who has already installed our lighting to really understand how they perform. Not someone who had them installed last month, but someone who has had them for years and can confirm they are still performing? Dont take our word for it, speak to our customers. Contact us for more information. BSS LED Australia 9/3 Jones Street, Pyrmont, NSW, 2009, Australia Phone: 02 80845150 Email: info@bssled.com.au