The Fluid Manager The Safest Connections... The Lutz Accessory Range for Electrical & Pneumatic Drum, Tote and Container Pumps A c c e s s o r y R a n g e Accessory Range Safety is our Concern
At a glance Productdetail Specification Order-No. 5 5 3 4 4 5 7 4 4 4 8 9 3 0 l Nozzle 7 Female hose couplings 3 Side mount clamp Hose 8 Barrel adaptor 4 Flow meter 3 4 Hose connection Hose clamps 9 0 Emission proof fume barrier Foot strainers 5 Lifting eye Ground and Bonding wire 5 Reducer l Discharge spout Quick action hose coupling Wall hanger l Suitable for transferring combustible and flammable liquids (e.g. ethanol, petrol) or in explosive hazard area.
Nozzles Specification Order-No. Productdetail PP nozzle For filling and transferring neutral and aggressive liquids. With hoop guard and two outlet spouts ø 0.9" (cylindrical) and ø /" (tapered). Polypropylene (PP) housing and valve tappet. FPM (Viton ) seals. Other seals on request. Operating pressure: max. 43.5 psi at 8 F Viscosity: max. 70 cps Flow rate: max. 3. GPM (water) Temperature of medium: max. F Weight: approx. 0.55 lbs Connection: male thread /4 BSP 004-380 hose barb 3/4 004-380- hose barb 004-380- hose barb 3/4 with swivel 004-380-3 hose barb with swivel 004-380-4 PVDF nozzle For filling and transferring neutral and aggressive liquids. With guard and two outlet spouts ø 0.9" (cylindrical) and ø /" (tapered). Polyvinylidenfluoride (PVDF) housing and valve tappet. FPM (Viton ) seals. Other seals on request. Operating pressure: max. 43.5 psi Viscosity: max. 70 cps Flow rate: max. 3. GPM (water) Temperature of medium: max. 7 F Weight: approx. 0.7 lbs Connection: male thread /4 BSP 004-390 hose barb 3/4 004-390- hose barb 004-390- hose barb 3/4 with swivel 004-390-3 hose barb with swivel 004-390-4 Stainless steel nozzle Ideally suitable for filling and transferring liquids - also for combustible and flammable liquids - in food and pharmaceutical industry. Stainless steel (3) housing and valve tappet. With guard and swivel. Other seals on request. Operating pressure: max. 43.5 psi Viscosity: max. 70 cps Flow rate: max. 3. GPM (water) Temperature of medium: max. 7 F Weight: approx.. lbs Connection: male thread /4 BSP 004-370 hose barb 3/4 004-370- hose barb 004-370- hose barb 3/4 with swivel 004-370-3 hose barb with swivel 004-370-4 Viton and Kalrez are registered trade marks of DuPont Dow Elastomers. l Suitable for transferring combustible and flammable liquids (e.g. ethanol, petrol) or in explosive hazard area. 3
Nozzles Productdetail Specification Order-No. Brass nozzle Brass housing and valve tappet, nickel-plated. PTFE seals. With guard and swivel. For filling and transferring solvents and neutral liquids. Operating pressure: max. 58 psi Viscosity: max. 70 cps Flow rate: max.. GPM (water) Temperature of medium: max. 7 F Weight: approx..3 lbs Connection: hose barb 037-50- l Aluminium nozzle with swivel For filling and transferring fuel and diesel oil. Aluminium housing and valve tappet. NBR seals. With guard and swivel. Operating pressure: max. 58 psi Viscosity: max. 70 cps Flow rate: max. 5.9 GPM (water) Temperature of medium: max. 40 F Weight: approx. 0.88 lbs Connection: hose barb 037-50- l PVC hose Transparent PVC hose for non flammable liquids. Operating pressure: max. 35 psi Temperature of medium: 3 F up to 40 F Nominal diameter 3/4 0374-43 0374-44 /4" 0374-45 Electrically conductive hoses Caution: Electrical conductivity is assured through the use of break-resistant textile copper threads in the rubber coating. If correctly installed, resistance during the entire life of these will remain below 0 ohms. Contact factory for details l Suitable for transferring combustible and flammable liquids (e.g. ethanol, petrol) or in explosive hazard area. 4
Hose connections Specification Order-No. Productdetail 3 Hose connection included with pumps 4 Hose clamps Stainless steel hose clamps to secure hoses at the hose connection. Nominal diameter: / to /4 0000-00 5 Reducer To connect quick action hose coupling with pump tube. Female thread /4 and Material PP 004-07 Stainless steel 037-09 l Quick action hose coupling Male adapter 7 Material Stainless steel 037-04l PP 037-0 Female hose coupling Ensure rapid, water-tight and leakproof connection between pump and hose. Available in stainless steel and polypropylene Material Stainless steel " Seal FEP/EPDM 037-05 l PP " Seal Viton 037-0 A complete quick-action hose coupling is consisting of reducer plus female and male coupling element. 8 Barrel adaptor Barrel adaptor supports the pump tube in the bunghole, preventing pump from tilting drum when empty. for pump tubes: PP, PVDF-MS 008-007 MMS/MSL, Alu/SS, MP SS, RE 88 SS 008-5 8 Barrel adaptor in galvanized steel For fixing the pump in the drum opening. Prevents the drum pump falling over in the empty drum. Thread G. For mixing pump tube PP 008-03 B70V 004-9 5
Emission proof fume barrier To permit reliable application, emission protection for on site pumping operations must be made as convenient as possible under practical conditions. The Lutz fume barrier achieves more for the user while involving less work: All that is needed is a single drum adapter with two integrated valves. Due to active seal, emission protection is guaranteed even in the event to wear and tear, damage or pump tube diameter tolerances. The lower part of the adapter can be adapted to varying thread and diameter sizes in container openings. Simple installation using a plug-inconnection for individual adaption. Stability ensured by integrated spring loaded mechanism. Suitable container cup for container emptying available. Larger dimensioned air valves cater for pressure equalisation by the fast emptying of containers. Productdetail Specification Order-No. 9 Emission proof fume barrier To prevent emission of dangerous gases when using a drum pump, so protecting the operator, the environment and the drive motor from hazardous, aggressive gases and vapours. Two venting valves ensure pressure compensation between indside of the drum and surrounding atmosphere. Connection for gas displacement pipe: 3/8 female; Screw male bung thread. Seals: Viton or EPDM. Other threads and seal materials on request. Material Pump tube diameter: PP.58 and. inches 004-50 Brass. inches 004-5 l Stainless steel. inches 004-53 l Hose assembly fume barrier needed for sealles genous tubes 004-7 Viton is a registered trademark of DuPont Dow Elastometers. l Suitable for transferring combustible and flammable liquids (e.g. ethanol, petrol) or in explosive hazard area.
Foot strainers, Discharge spout, Wall hanger, Side mount clamp Specification Order-No. Productdetail 0 Foot strainers Available in PP, PVDS and stainless steel, for mounting on the pump foot. Keeps impurities away from the rotating parts. Material Pump tube: PP PP dia. 40 mm 0343-05 PP PP dia. 4 mm 0343-77 PVDF PVDF and HC dia. 4 mm 0343-87 Stainless steel SS dia. 4 mm 004-7 l Stainless steel B70V 004-80 l Discharge spout Serving to transfer and fill liquids directly into other vessels. They are available in PP, aluminium and stainless steel and are threaded onto the pump outlet connection. Material Nominal diameter Wing nut PP 3/4 /4 004-400 Alu /4 004-373 SS /4 004-5 l SS / (for B70V) / 004- l Wall hanger For storage of drum pumps. This facility helps protect pumps from damage, and maintains their value. For pump tubes with hand wheel 004-308 Wall hanger For storage of drum pumps. B70V 004-309 B70V-SR 004-307 3 Side mount clamp To fasten the drum pumps in open-topped drums and containers. Suitable for different pump tube diameters. For pump tubes: PP, Alu, SS, PVDF and HC 005-040 For pump tube B70V dia 5 mm 005-05 Viton is a registered trademark of DuPont Dow Elastometers. l Suitable for transferring combustible and flammable liquids (e.g. ethanol, petrol) or in explosive hazard area. 7
Flow meter, Lifting eye, Ground and Bonding wire Productdetail Specification Order-No. 4 Electronical flow meter, TR series For easy and precise flow rate measuring of various liquids. Easy of handling, compact design and ideally to combine with all drum and container pumps (connection 3/4 or /4 ), available in polypropylene (PP) or polyvinylidenefluoride (PVDF). For more details request leaflet 9000-3 rev. 4 Modular electronical flow control system, TS series For metering all kinds of liquids. Wide range of applications: Directly at the drum pump, remote or in-line operation posible. Conventient pre-setting of required volume using a numerical keypad. A comprehensive range of system components offers practical problem solutions. Two standard and threee explosion proof meter versions are available. For more details request leaflet 9000-3 rev. 5 Lifting eye To simplify the process of lifting the pump in and out of drums and containers. When using an explosion proof driving motor the Ex-protective plug is mounted onto the lifting device. for B55-T 0-047 for B70V with three phase motor 07-9 for B70V with pneumatic motor 07-3 for B70V with three phase gear motor 07-3 for B70V-SR with universal motor 04-95 Ground and Bonding wire Serves to create electrically counductive connection between explosion proof pump and container as earthing and ground and bonding function. Ground wire Bonding wire 0 004-994 l 004-995 l l Suitable for transferring combustible and flammable liquids (e.g. ethanol, petrol) or in explosive hazard area. 8
For use with compressed air motors Specification Order-No. Productdetail 7 8 0 3 3 4 9 7 Maintenance unit For cleaning and oiling the air supply. Filter, lubricator and regulator with gauge for setting operating pressure. Motor: 4 GT 004-5- MD-/MD- 004-5- DA-Motors 004-5-3 8 Coupling female part Self-disconnecting in brass. 3/8 male thread 037-54 9 Nipple (male part) In brass 3/8 male thread 037-045 0 Air hose coupling connector In brass, for connection to an existing compressed air supply with coupling. For compressed air hose / 037-039 Stop valve Chromium-plated brass for regulating the compressed air as well as the speed of the compressed air motors. 3/8 male thread / female thread 037-043 9
Compressed air hose, Hose clips, Coupling Productdetail Specification Order-No. Compressed air hose PVC-hose with intermediate woven layer, /", for air supply to compressed air motors. Operating pressure: / max. 00 psi 0373-54 3 Hose clips For compressed air hose / 030-5 4 Coupling (female part) Self-disconnecting in brass, with hose connector /" For compressed air hose /" 037-7 0
Necessary accessories for use in hazardous locations 8 Bonding wire Ground wire 5 3 3 Conductive hose, (0 Ohm) 9 4 Conductive fitting of the hose into hose connector 7 5 Metal pump tube for zone 0 in Stainless steel or Hastelloy C Explosion proof motor Lutz Silver Star or MD-/MD- (Ex) Air-Motor 7 Nozzle in Stainless steel (handregulated) Flow control system (Ex) Emission proof fume barrier Bonding is the electrical Grounding is the electrical Both Bonding and Grounding Metal pumps in stainless steel interconnection between con- connection between a container of containers of flammable or Hastelloy C and pump tainers (such as drum and a and a constant ground. liquids are required under U.S. motor must be bonded to metal receiving can). Bonding must A constant ground would be Government OSHA regulations container or grounded, if used be completed before pumping a metal pipe (water pipe) or rod and National Fire Protection with plastic container. Normal begins. For better conductivity in contact with the earth. Association Code 77, static safety procedures must be used paint and dirt shall be removed An underground tank and piping electricity. at all times when operating any from the contact points. connected to it would be piece of machinery. inherently grounded by nature of the installation.
The Fluid Manager Lutz Pumps, Inc. 0 Beaver Ruin Road Norcross, GA 30093-4898 Phone: (770) 95- (800) 843-390 Fax: (770) 93-0334 http://www.lutzpumps.com e-mail: info@lutzpumps.com Lutz offers the optimum solution for professional Fluid Management Drum and Container Pumps. Flow Meters. Double Diaphragm Pumps