PRODUCT CATALOGUE Cape Town 18 Darter Road Blue Water Estate Kommetjie Luke Fowles - 076 161 8124 luke@providenttech.co.za Frank Fowles - 082 445 1541 frank@providenttech.co.za www.providenttech.co.za Gauteng 245 Louis Botha Avenue Orchards Johannesburg Reiken Pinnoy - 083 419 8423 reiken@providenttech.co.za Hamilton Murray - 083 283 4063 hamilton@providenttech.co.za
KEYRING REMOTES Keyring Remotes available from single button to 6 button Unique TX clip antenna design increases operating range by 50% Crystal controller +/- 100KHz 12V alkaline battery: GP23AE Typically 2 years battery life or 20,000 activations LED flashes when the battery is low Monoprene rubber-like buttons are easy to press and click positively Gate and garage door access control Panic activations Arming / Disarming alarm systems Switching On / Off lights Switching On / Off generators PANIC REMOTE Big red button designed for elderly and frail people Moisture-proof design Unique antenna design incorporating the pendant chain to increase range by 50% 12V battery operation (23A alkaline battery) LED flashes when there is a low battery condition Frail care facilities nurse call Panic activation for shop keepers Response officer panic button Home panic button WALL MOUNT TRANSMITTER The Wall Mount Transmitter is housed in a weather proof ABS housing so that it can be used outdoors as well as indoors. The unit has an internal buzzer which will beep a low tone when the unit is pressed. The unit can be used as a strike lock door release button, long range door bell button, panic button in guard houses or around industrial sites, under counter panic buttons in banks and shops Audible piezo output Weather-proof ABS housing Over-moulded easy to press button 3V long life lithium battery Frequency stability controlled +/- 75KHz Under counter panic button Nursing home panic button Bathroom panic button Shower panic button Door release button Door bell button
FOUR CHANNEL STAND ALONE TRANSMITTER 4 Channel telemetry outputs Normally open or normally closed trigger inputs LED indication when a channel is triggered Crystal frequency stability controlled +/- 100KHz 1 or 3 transmit signals can be selected All inputs are supervised On / Off software functionality Transmission of alarm signals Linking electric fence outputs to alarms Switching On / Off pumps on farms Industrial machinery control Wireless control of generators ONE CHANNEL FIXED TRANSMITTER N/O Inputs 12V DC Code hopping PIR (2 CHANNEL) TRANSMITTER The PIR-TX module is designed to install into battery-powered motion sensors where running cables is not an option. This product is designed to offer powerful RF coverage in difficult and large-scale properties. The unit does self diagnostics and flashes its LED if incorrectly wired Alarm and tamper transmit outputs (2 channels) Powered by 2 x low cost AA alkaline batteries Battery life under normal conditions 2 years Dipswitch selectable options for:- Normally open or normally closed wiring Tamper enabled or disabled System alive signal output every 4 hours WALL MOUNTING BRACKET Wall mounting bracket for the panic transmitter available in white or black moulded ABS plastic GSM / GPRS COMMUNICATOR Used for sending messages to personnel informing them of a panic situation. New feature of coding in remotes off site via a SMS message command
MIMIC BASE MONITORING PANEL The Wireless Panic Mimic base unit with microsd card backing up and guard pin numbers Memory capacity of 2,000 remotes MicroSD card for backing up USB 2.0 Port 40-Character custom text programmable SMS output for the WISMO GSM modem Programming remotes via SMS Internal buzzer notification RS 485 Data receiver BUS Monitoring software GUI with reporting User codes & full event logging of all actions Keeps time & date for several days if de-powered Shopping centre panic system Frail care nurse-call system Retirement village alarm monitoring Housing estate alarm monitoring Office park alarm monitoring Resort alarm monitoring USB DONGLE Short range receiver USB dongle used to capture our code hopping remotes serial number that can be then SMS ed to a MB4000 for off site coding TOWNHOUSE GATE ACCESS CONTROL RECEIVER The Complex Receiver is specifically designed to be installed onto motorised gate entrances of town-house complexes, residential estates, office parks, small businesses, golf estates schools or even boomed off residential areas. Has easy to understand menu s for learning in or deleting remotes and setting the time and date. The unit is also password protected so that unauthorised persons cannot learn in or delete out remotes. A microsd card can be inserted into the unit to make a backup of the remotes and download the events log. If the microsd card ís left in the unit, the unit will detect that the card is present and write events when they occur to the card into a text file. Over a million events may be listed in the file. 2-Channel digital rwith time and date stamping designed for access control in gated complexes 2 Channel relay output Code-Hopping encryption 8000 remotes can be learnt Real time and date clock event 2000 event time and date internal microsd card compatible FAT32 Backing up via microsd card Installing via microsd card Software application available USB 2.0 coms port compatible Password protected Backward compatible to VER2
1, 2 AND 3 CHANNEL RECEIVERS These Receivers are designed to fit into small spaces and are value for money. Our 150m range receivers can be set to trigger a relay contact for 1 second, 3 seconds, 1 minute, 3 minutes. Latching and ON-OFF functionality. Latch or momentary Selectable momentary times: 1sec; 3sec; 1min; 3min Buzzer tone Crystal controlled +/- 100KHz Frequencies: 403MHz / 433MHz 12-24V AC/DC input Gate and garage door access control Panic activations Arming / Disarming alarm systems Switching On / Off lights Switching On / Off generators 1, 4 CHANNEL AND DATA LONG RANGE RECEIVERS Available in either single channel or 4-channel. The unit is weather proof and is supplied with a rubber duck antenna. This product is suitable for larger sized properties needing the ultimate in performance, quality and range Latch or momentary Selectable momentary times: 1sec; 3sec; 1min; 3min; On/Off Buzzer tone Crystal controlled +/- 100KHz Frequencies: 403MHz / 433MHz 12-24V AC/DC input Weather proof housing Gate and garage door access control Panic activations Arming / Disarming alarm systems Switching On / Off lights Switching On / Off generators REPEATER UNIT LONG RANGE This unit is designed to enhance the range covered by Receivers and Mimic Base units Auto learning of signals to memory 4000 memory locations Auto masking of repeated signals AC fail RF signal output Random signal staggering
Transmission of alarm signals Linking electric fence outputs to alarms Switching On / Off pumps on farms Industrial machinery control Wireless control of generators BACKUP POWER SUPPLY 6,4 AMP Our Intelligent Power Supply / Battery charger unit is designed to meet with international safety and certification standards. The unit has under and over voltage protection and is fuse-protected. Microprocessor controlled charging output Low battery switch-off at 10V DC Buzzer tones on battery low and AC fail 6 x separate 1A resettable fuse protections outputs Fuse protection on AC input ABS plastic enclosure Fits a 17A/H battery (not included) Alarm panel battery backup CCTV battery backup Backup power supply for door controller Maglock for an access control solution BACKUP POWER SUPPLY 3,2 AMP Our Intelligent Power Supply / Battery charger unit is designed to meet with international safety and certification standards. The unit has under and over voltage protection and is double fuse-protected. Microprocessor controlled charging output Low battery switch-off at 10V DC Buzzer tones on battery low and AC fail Resettable fuse protection on output Fuse protection on AC input ABS plastic enclosure Fits a 7A/H battery (not included) Alarm panel battery backup CCTV battery backup Backup power supply for door controller Maglock for an access control solution SINGLE POLE RELAY BOARD 12-16V AC / DC Normally Open / Closed relay contacts 10A rating @ 12V DC / 5A @ 125V AC LED lights when the relay is on
12 BUTTON WIRELESS ACCESS CONTROL KEYPAD Features and Benefits: Wireless 403Mhz / 433Mhz Compatible with Sherlotronics receivers 9 x channels + 1 x doorbell output IP55 outdoor weather proof Long life AA battery powered 1000 user codes Battery powered, size: AA MicroSD card backing-up 1-10 digit pin code Pin programmable via a computer app Holiday mode Programmable anti-hack wrong code attempts Secure and tamper proof Code-hopping