Instrumentation Division
International UK Qatar Limited Saudi Arabia Limited Jones Engineering Group is in business for over 120 years and are currently working in Ireland, UK, Europe and the Middle East
BioEnergy Technology Providers Instrumentation Division Overview Jones Engineering through its subsidiary Douglas Calibration Services Ltd. (DCS) provides a full range of Instrumentation services. Industries served: Pharmaceutical Biotech Petrochemical Energy Medical Devices Food & Beverage Healthcare Water/Utilities Manufacturing/Industrial Semi-conductor 01
Services Instrument Procurement and Installation In-house and Satellite Calibration Laboratories Bench Calibrations Specifications Verification Data Logging & Temperature Profiling Preventative Maintenance Support Loop Checking ATEX Inspections Test Equipment Certification Plant Start-Up Assistance Portable Appliance Testing Flow Measuring Shut Down Support Turnarounds On-Site / Field Calibrations Test Equipment Asset Management 02
ATEX / Calibration ATEX ATEX inspection and Installation services for potentially explosive atmospheres. We have trained inspectors who can carry out your initial visual and detailed inspections prior to start-up on existing installations or after modification works to achieve ATEX compliance for our clients. We can also provide assistance with the preparation and calculations for the generation of your DSD s (Descriptive System Documents) for all Intrinsically Safe loops. Calibration Labs From our calibration laboratory we can offer our clients calibration solutions which are supported by a proven ISO 9001:2008 Quality Management System. This provides our clients with the knowledge and assurance that all calibrations performed are completed to the highest standard by technically competent technicians using approved procedures and certified traceable test equipment. All test equipment is cross-checked on a quarterly basis to maintain a high level of confidence in the calibration reports generated. 03
Pfizer Conoco Philips Selection of our Industrial Projects Eli Lilly Shell Centocor Merck Sharp & Dohme 04
Kinsale Energy ESB Bord Gais Diageo Biomarin 05
Scope of Measurements & Capabilties Temperature Range -80 C to 350 C. Sensors (RTD / TC), Transmitters, Switches, Indicators / Gauges & Digital Handheld Indicators Temperature Mapping/ Validation Range -196 C to 350 C / 5% to 95% rh Refrigerators & Freezers (both front load & walk-in), Autoclaves, Incubators & Ovens, Stability Rooms, Chambers, SIP / TFF skids, Media Lines and Reactor Vessels, Furnaces, Cold Stores, Rooms & Warehouse Facilities Pressure Range -0.95 Bar to 550 Bar Transmitters, Indicators/Gauges, Switches, Magnehelics & Relief Valves Flow Range 0.2 Kg/min to 1750Kg/min. Any area including hazardous & hygienic for Positive Displacement,Turbine, Electromagnetic, Coriolis, Vortex & DP Orifice Plate Mass Range OIML class M1 and F1 weights 0 to 2000 KG. Weigh Systems, Load Cells, Floor Scales, Platform Weighers, Laboratory Balances, Check Weighers 06
Mechanical/Dimensional Measurement Range 0 to 3000mm Micrometers, Callipers, Depth Gauges & Torque Wrenches Analytical Range 0 to 14pH, 1 to 500,000 microsiemens, 124 to 650mV redox, ph, Conductivity, Resistivity & Redox Monitoring and Controlling Systems Speed/Velocity Range 0 to 60 000 rpm Agitators, Conveyors & Pumps Humidity Range 5% to 95% rh Transmitters, Hand Held Indicators & Data Loggers Time Timing Devices Range minimum 1 second. Controllers, PLC activities & General Timing Devices ATEX Inspection Services COMPEX Trained Inspectors, Visual, Close & Detailed Inspections, Assistance with EPD & DSD Calculations and Support Documentation, Planned Periodic Maintenance & Inspection Schedules 07
Selection of our Clients Air Products Bord Gais Esso Aughinish Alumina Conoco Phillips GAMA Power Stations Shell Top Siemens Eli Lilly Diageo Elan Texaco Fluor Jacobs BOC PM Group Loughwood Greene Marathon Endesa Johnson & Johnson Merck Sharp & Dohme GlaxoSmithKline 08
Office Locations Working Internationally We have over 1,800 employees working worldwide Douglas Calibration Services Ltd. Euro Business Park, Little Island, Cork. Tel: +353 (0) 21 4510700 For office locations see www.joneseng.com Head Office Dublin, Ireland Tel: +353 (0)1 6711500 Damastown Office, Ireland Tel: +353 (0)1 8697100 London Office, United Kingdom +44 207 242 1706 Riyadh Office, Kingdom of Saudi Arabia Tel: +966 121 505 28 Jeddah Office, Kingdom of Saudi Arabia Tel: +966 504 586 259 Doha Office, Qatar Tel: +974 448 067 97 Al Khobar Office, Kingdom of Saudi Arabia Tel: +966 54 111 3901 Quality work through quality people
joneseng.com