ECO ROOF FAN A modern, energy-saving roof fan with a DC motor INSTALLER Register the roof fan for an extended 5 year guarantee! Download VILPE app for Android or ios and fill in the information. Further information: BEFORE INSTALLATION, REMOVE LABEL
VILPE makes fan selection easy! Today, ventilation comes as a matter of course, but not without a cost of money and energy. VILPE product family is a complete system of ventilation and roofing products for providing fresh air for your domestic enviornments easily, securely and energy efficiently. VILPE ECo roof fans are the result of a long product development and advanced design. They offer a unique flow characteristics, maximum efficiency and extremely low SFP. This, combined with easy installation and the best warranty terms makes VILPE into the easiest choice for your ventilation needs. VILPE solutions are installed easily and securely on any roofing materials and profiles on the market. Learn more about how simple and cost effective ventilation can be Manufacturing materials VILPE ECo roof fans are manufactured from corrosion, weather and impact resistant, recyclable, UV protected and solid coloured polypropene (PP). PP is chemically neutral and harmless to the environment. VILPE -standard colours Air flow, all VILPE roof fans Black Reference colour RAL 917 (de 1,17) Brown Reference colour RAL 817 (de 2,33) Green Reference colour RAL 62 (de 1,91) Grey Reference colour RAL 715 (de 2.11) Red Reference colour RAL 9 (de 4.92) Brick red Reference colour RAL 84 (de 2.8) Light grey Reference colour RAL 74 (de,54) m 3 /h 18 36 54 72 9 18 126 144 162 6 7 1 ) E12 Ø 125 mm 5 2 ) E19 Ø 125 mm 3 ) E22 4 5 4 ) Ø 16 mm ECo11 Ø 11 mm 6 5 ) ECo19 4 Ø 125 mm 6 ) ECo22 Ø 16 mm 3 7 ) ECo2XL 3 Ø mm 2 2 1 2 3 4 Ilman Air flow tilavuusvirta rate, l/secdm /s
VILPE ECo roof fans VILPE ECo series roof fans are effectively controlled roof fans with a DC motor. The motor has better efficiency and optimised control, so the ECo roof fan consumes much less energy than a roof fan with an AC motor. Applications VILPE ECo roof fans with a DC motor are used in kitchen or bathroom exhaust ventilation as part of the air conditioning systems of new apartment buildings and private and terraced houses. When refurbishing older apartment buildings and private and terraced houses, natural ventilation can be converted to mechanical by means of the VILPE ECo roof fan. VILPE ECo roof fans are used for the ventilation of homes, offices, commercial premises, production facilities, public buildings and any other areas where fresh air is needed. In apartment buildings, ECo roof fans can be used for exhaust ventilation in lift shafts and other public areas. VILPE ECo is also used for base floor ventilation, radon exhaust ventilation, and exhaust ventilation in garages and storerooms. Fresh air indoors A roof fan will remove dirty, stuffy, humid and dusty air plus unpleasant smells from indoor areas. It will also protect the structures of the building and any property stored there from humidity and impurities. Unrivalled ECo series Control with a 1 V voltage message helps integration with building technology systems Unlike previous VILPE roof fan solutions, VILPE ECo fans can be provided with stepless remote control, which uses a standard 1 V voltage message. An ECo roof fan can also provide an output signal which can be used to monitor the motor s rpm. This allows connecting ECo roof fans to an automatically controlled building technology system where they can be monitored and controlled with the system s CPU. ECo 11 series models can be used to exhaust radon or to ventilate an ecological toilet. The rpm of their motors is controlled by a potentiometer located in a link box on the roof, in the cowl of the roof fan. DC motor saves energy. The fan in VILPE ECo roof fans is based on the EC technology, which means that it is an electronically commuted fan with a brushless DC motor. ECo roof fans address the challenge of reducing total energy consumption by saving energy, as the DC motor is much more effective than an AC motor. Calculations on the efficiency needed to move air show that a VILPE ECo roof fan will save up to 4 6% of energy when compared to an AC roof fan, depending on the application. ECo roof fans meet future requirements VILPE ECo conform to the requirements given in the following EU directives: energy label (EU) 1254/214, ecodesign (EU) 1253/214, ecodesign (EU) 327/211, Electromagnetic Compatibility (EMC) Directive 214/3/EU, The Low Voltage Directive (LVD) 214/35/EU 214/35/EU, RoHS directive 2/95/EC, WEEE directive 2/96/EC.
ECo19, ECo22 ECo19P Duct size ø 125 mm To be installed on the roof with a VILPE roof pass-through suited for the roof type Due to its mm insulation, the pipe doubles as a sound absorber The inner pipe is made from galvanized sheet metal and has a lip seal ECo19S Duct size ø 125 mm To be installed on a flat surface either on a pipe with external ø 16 mm or directly on the surface with the included x mm installation set ECo Monitor ECo22P ECo Monitor can be used to monitor and control up to five ECo19, ECo22 and ECo2 XL roof fans. Duct size ø 16 mm To be installed on the roof with a VILPE roof pass-through suited for the roof type The inner pipe is made from galvanized sheet metal and has a lip seal ECo Controller - 1 V ECo22S ECo19, ECo22 and ECo2 XL roof fans can be controlled with an ECo motor controller, 1 V Duct size ø 16 mm To be installed on a flat surface either on a pipe with external ø 225 mm or directly on the surface with the included x mm installation set ECo11 ECo2 XL ECo2 XL models are especially suitable for use in large properties, such as apartment buildings, office buildings, halls and warehouses. VILPE ECo roof fans can be used as part of the ventilation system or for local extraction in the elevator shafts and other public facilities. In residential houses they are used for kitchen exhaust ventilation in combination with a cooker hood. ECo11 can be used to exhaust radon or to ventilate an ecological toilet. A potentiometer controls the rpm of the fan motor. It is installed in a link box on the roof, in the cowl of the roof fan. The potentiometer will be adjusted based on measurements taken indoors. ECo2P XL Duct size ø mm To be installed on the roof with a VILPE roof XL pass-through suited for the roof type The inner pipe is made from galvanized sheet metal and has a lip seal ECo2S XL Duct size ø mm To be installed on a flat surface either on a pipe with external ø 35 mm or directly on the surface with the included x mm installation set ECo11P Duct size ø 11 mm To be installed on the roof with a VILPE roof pass-through suited for the roof type ECo11S Duct size ø 11 mm To be installed on a flat surface either on a pipe with external ø 16 mm or directly on the surface with the included 2 x 2 mm installation set ECo11C Duct size ø 11 mm To be installed inside a sheet steel cone manufactured by a tin smith with Ø 17 mm at the top Electrical specifications Fan type Rated power Rated current Voltage Speed Rpm control ECo11 83 W,75 A 2/ Hz 3 rpm Potentiometer installed in a link box in the cowl of the roof fan ECo19 83 W,75 A 2/ Hz 3 rpm 1 V signal or PWM ECo22 85 W,7 A 2/ Hz 258 rpm 1 V signal or PWM ECo2 XL 165 W 1,4 A 2/ HZ 256 rpm 1 V signal or PWM
Flow performance values ISO 581:8, connection type C Air density 1,2 kg/m3 Electric power ISO 581:8, connection type C Air density 1,2 kg/m3 ECo11 Ø 11 mm m³/h 9 18 27 36 54 Ilman tiheys on 1,2 kg/m 1 V 4 3 2 1 V 1 2 3 4 6 7 8 9 11 12 13 14 16 Ilman tilavuusvirta, dm /s Air flow rate, l/sec Power consumed by the roof fan, W m³/h 9 18 27 36 54 9 8 7 6 1 V 1 V 4 3 2 1 1 2 3 4 6 7 8 9 11 12 13 14 16 Ilman Air flow tilavuusvirta, rate, l/sec dm 3 /s ECo19 Ø 125 mm m³/h 18 36 54 72 Jännite Voltage 1 V 1 V 4 3 2 1 2 3 4 6 7 8 9 11 12 13 14 16 17 18 19 Ilman Air flow tilavuusvirta, rate, l/secdm 3 /s Power consumed by the roof fan, W m³/h 18 36 54 72 9 1 V 1 V 8 7 6 4 3 2 1 1 2 3 4 6 7 8 9 11 12 13 14 16 17 18 19 Air flow rate, l/sec Ilman tilavuusvirta, dm /s ECo22 Ø 16 mm m³/h 18 36 Ilman tiheys on 1,2 kg/m 54 72 9 18 1 V 4 3 2 1 V 2 Ilman Air flow tilavuusvirta, rate, l/secdm /s Power consumed by the roof fan, W m³/h 18 36 54 72 9 18 Jännite Voltage 9 8 7 6 1 V 1 V 4 3 2 1 2 Air flow rate, l/sec Ilman tilavuusvirta, dm /s ECo2 XL Ø mm m³/h 18 36 Ilman tiheys on 1,2 kg/m 54 72 9 18 126 6 5 1 V 1 V 4 3 2 2 3 Power consumed by the roof fan, W m³/h 18 36 54 72 9 18 126 19 18 17 1 V 16 1 V 14 13 12 11 9 8 7 6 4 3 2 1 2 3 Ilman Air flow tilavuusvirta, rate, l/secdm 3 /s Air flow rate, l/sec
VILPE ECo Ideal Wireless 5 3 2 4 6 5 7 4 6 3 6 7 1 2 1 What is demand-controlled ventilation? Demand controlled ventilation is a smart system to maintain air quality in the desired level automatically, without human interference during the operation. The system automatically adjusts the required ventilation according to the prevailing air quality. Wireless sensors measure the relative humidity (RH) and carbon dioxide (CO2) levels in the air and send this information wirelessly to the control unit. The level of ventilation is then adjusted to secure good air quality without using excess energy. Why choose the VILPE ECo Ideal Wireless for demand-controlled ventilation? The VILPE ECo Ideal Wireless offers a cost-efficient solution with a short payback time compared to more complex ventilation solutions. The overall cost of the VILPE ECo Ideal Wireless is up to 7 per cent lower than the cost of a complete heat recovery (HVAC) installation. VILPE ECo Ideal Wireless is quick and easy to retrofit. The wireless communication solution minimises the need for wiring. If there are ducts already in place, the installation doesn t require building new ducts, i.e. all existing structures can remain as they are. Existing ducting or ventilation chimneys can also be utilised. Usage: Renovation sites and new buildings Whether you are renovating or building from scratch, the demand-controlled and energy-saving VILPE ECo Ideal Wireless is an excellent choice for an easy and budget-friendly implementation for your ventilation needs. VILPE ECo Ideal Wireless system is an ideal solution if you wish to convert an existing natural ventilation system to a mechanical ventilation system. VILPE ECo Ideal Wireless is also an easy and affordable way to turn a mechanical ventilation system into a demand-controlled ventilation system that saves energy and money. VILPE ECo Ideal Wireless is well-suited for both old and new buildings. It also offers a good solution for ventilation of warehouses and garages. If you can answer YES to any of the following questions VILPE ECo Ideal Wireless is the right choice for you: Excessive humidity or stuffy air in the bathroom or toilet? Excessive humidity in the garage, storage or warehouse? Poor ventilation during the summertime? No mechanical ventilation, i.e. no ventilation equipment? Only mechanical exhaust ventilation system with manual or timer control? Considering ventilation system options for a new warehouse, garage or outhouse? Operational principle The VILPE ECo Ideal Wireless is an automatic control system for demand-controlled ventilation. Its sensors measure the relative humidity (RH) and carbon dioxide (CO2) levels of the indoor air, and based on the information they relay the control unit adjusts the output of the ECo roof fan installed on the roof. Sufficiency of fresh supply air in the space is ensured by wall-mounted supply air valves and transfer air routes. Parts of the system Art. 73ILPE ECo Ideal Wireless ventilation control, incl. User Panel (UP), 1 pc Control Unit (CU), 1 pc Relative Humidity Sensor (RH), 1 pc Art. 7331 VILPE ECo Ideal Wireless RH Sensor (relative humidity) Art. 733ILPE ECo Ideal Wireless CO2 Sensor (carbon dioxide) VILPE ECo roof fan and VILPE pass-through for your particular roofing material. Location of the system parts The VILPE ECo roof fan is to be installed on the roof with a VILPE pass-through. Pass-throughs are available for all standard roofing materials and profiles. For selecting the right pass-through, a quick selection tool is available at VILPE.COM. The User Panel (UP) of the ventilation control system is to be installed at a place with easy access, preferably near the house entrance. The Control Unit (CU, receiver) is to be installed inside the building in a place that allows easy connection with the VILPE ECo roof fan (protection: IP 21). The Relative Humidity Sensor (RH) is to be installed in spaces with potential humidity issues, such as the bathroom, toilet, kitchen or bedroom. The Carbon Dioxide Sensor (CO2) is to be installed in spaces with potential CO2 issues, such as the living-room or bedroom. Settings of the User Panel The user panel has four settings: Home, Away, High and Automatic. The Home setting is for conditions requiring constant air conditioning in order to maintain a good indoor air quality. The Away setting is used when there are no occupants present and only basic ventilation is required. The High setting is used when there is a temporary need for increased ventilation. The Automatic setting sustains the ventilation at the level of the predetermined Away level and adjusts itself according to the information from the RH and CO2 sensors. If the levels are elevated, the roof fan output is increased; if the levels are low, the roof fan output is decreased. Please refer to VILPE.COM for further information on: Quick selection tools VILPE ECo roof fans VILPE roof pass-throughs for tile, steel, bitumen and special roofing materials
Technical data 5 VILPE ECo roof fan + roof pass-through 6 Supply air valves 1 User Panel 2 Control Unit 3 RH Sensor 4 Sensor CO 2 7 Transfer air 1. VILPE ECo Ideal Wireless User Panel Overall dimensions (h x w x d) 84 x 84 x 15 mm 2. VILPE ECo Ideal Wireless Control Unit Overall dimensions (h x w x d) x 12 x 28 mm Weight ± 125 g Weight ± 125 g Operating Temperature Range to 4 C Shipping & Storage Temperature Range -2 to 55 C Operating Temperature Range to 4 C Shipping & Storage Temperature Range -2 to 55 C Relative Humidity - 9%, non-condensing Relative Humidity - 9%, non-condensing Ingress protection (IEC6529) IP3 Ingress protection (IEC6529) IP3 Power supply Battery Mains Power Source 23VAC ± 1%, Hz Battery type CR232 Maximum power consumption 4VA Battery lifetime 6 years Wire diameter.25 to 2.5 mm2 Communication frequency 868.3 MHz Communication frequency 868.3 MHz Output power at least dbm. Output power at least dbm You are not allowed to use the device outside of Europe. Multipoint communication, max 2 devices Output signal -1V 3. VILPE ECo Ideal Wireless RH Sensor Overall dimensions (h x w x d) x x 25 mm Input signals Normally Open You are not allowed to use the device outside of Europe. Weight ± 125 g Operating Temperature Range to 4 C Shipping & Storage Temperature Range -2 to 55 C Relative Humidity - 9%, non-condensing Ingress protection (IEC6529) IP3 Power supply Battery Battery type AA battery, 2x Communication frequency 868.3 MHz Output power at least dbm. Measurement range: % RH Measurement accuracy 11-89%RH at -1% and 9-% 3% RH 7% RH Measurement resolution 1% RH Measurement stability 1.5% RH over 5 years You are not allowed to use the device outside of Europe. 4. VILPE ECo Ideal Wireless Sensor CO 2 Overall dimensions (h x w x d) x x 25 mm Weight ± 125 g Operating Temperature Range to 4 C Shipping & Storage Temperature Range -2 to 55 C Relative Humidity - 9%, non-condensing Ingress protection (IEC6529) IP3 Mains Power Source 195-25AC, Hz. Maximum power consumption 4VA Wire diameter.25 to 2.5 mm2 Communication frequency 868.3 MHz Output power at least dbm Optimal measurement range 4 to PPM Measurement accuracy (within optimum 4 PPM + 2% of reading at 2 C range, >1min after powerup) Stabilization period after power-up 2 minutes You are not allowed to use the device outside of Europe. /ECO
441 822 Printed matter SK Tuote Oy Founded on 1975, SK Tuote Oy is the leading company developing and manufacturing ventilation equipment and speciality roof products in Finland, the Baltic countries, Russia and the Nordic countries. SK Tuote is a reliable, stable and a determined partner. Its products are known for the VILPE brand. Quality and the Environment SK Tuote Oy is most devoted on the quality of company products as well as its operations. The management system of SK Tuote has been granted both the ISO 91:8 quality certificate and the ISO 141:4 environmental certificate. These certifications cover the product development, manufacturing and sales of VILPE products. VILPE products improve the quality of housing and living, ensure fresh indoor air, reduce health risks and prolong the lifespan of the structure. VILPE products are innovative and high-quality as well as responsibly designed, manufactured and certified solutions. Continual improvement of our operations and products is central to SK Tuote; after all, it means safety and long-lasting comfort for end users. VILPE is a brand of safe building and living. The primary objective of the quality system of SK Tuote Oy is to provide quality fulfilling our customers needs. Environmental objectives include developing energy-efficient products and production methods, decreasing the amount of waste and increasing recyclability of plastic materials in the entire product lifespan. SK Tuote 1375/Waasa Graphics 2.217, SK Tuote Oy Kauppatie 9 FI-6561 Mustasaari FINLAND Sales and technical support Tel. +358 2 123 3222 sales@vilpe.com