Distributed in North America by INTERSTEAM TECHNOLOGIES 170 Princess Street Hamilton ON L8L 3L3 1-800-281-4413 www.intersteam.com
This Steam Vapour Cleaning system is a powerful tool for cleaning deeper, easier and better. Used across Canada in fast food, long term care and other healthy workplaces. Plugs into a standard 120 volt outlet and uses only tap water to produce steam from a continuous boiler. Dry steam vapour (6-8% moisture) extracts dirt and grease from any surface without chemicals. This unit is CSA/NRTL approved. This steamer can also be equipped with the TANCS disinfection module for one step cleaning and disinfection. Technical Specs - SteamKing 160 C (320 F) Temperature 2L boiler 6 bar/87psi 3 Litre water reservoir 1750 watt heating element 120v 1ph 60Hz 5-7 min heating time from cold $2650 $2990 with TANCS
The LadyBug 2200S features the same quality construction as our best commercial models. The big difference is that it s not too big! For small areas, this steamer can t be beat. This system comes with all of the tools you need for any cleaning job, and uses our superior red slide lock accessories, which means you can order supplementary accessories for your system from our extensive catalogue. This steamer can also be equipped with the TANCS disinfection module for one step cleaning and disinfection. Technical Specs LadyBug 2200S 142 C (289 F) Temperature 1.4L boiler 4 bar/58psi 1.9 Litre water reservoir 1500 watt heating element 120v 1ph 60Hz 5-7 min heating time from cold $1249 $1499 with TANCS
The base trolley cart supplied with the LadyBug 2300 XL allows for easy access tool storage. This system comes with red slide lock accessories, so you can order supplementary accessories at any time to use with your system. This steamer can also be equipped with the TANCS disinfection module for one step cleaning and disinfection. Technical Specs LadyBug 2300XL 147 C (298 F) Temperature 2L boiler 4.5 bar/66psi 1.9 Litre water reservoir 1500 watt heating elements 120v 1ph 60Hz 5-7 min heating time from cold $1449 $1699 with TANCS
The VaporJet system includes a continuous fill, non pressurized water reservoir which allows you to clean, sanitize and disinfect* in one step without ever running out of steam! On/Off switch allows for easy operation, while variable pressure knob allows for precise pressure control. This system comes with all of the tools you need for any cleaning job, and uses our superior red slide lock accessories, which means you can order supplementary accessories for your system from our extensive catalogue. *For disinfection capability, you can add the TANCS Module, with lab and clinically proven efficacy against healthcare and foodborne bacteria. Technical Specs - VaporJet 160 C (320 F) Temperature 2L boiler 5 bar/72 PSI 3 Litre water reservoir 1750 watt heating element 120v 1ph 60Hz 5-7 min heating time from cold $1999 $2399 with TANCS
Thermal Accelerated Nano Crystal Sanitation (TANCS ) is a process which converts ionic minerals from common municipal tap or well water within your steam vapor system to millions of nano crystals. TANCS destroys microbes and provides a safe, fast-acting and effective process for disinfection. Adding TANCS to your steam system allows you to clean and disinfect all surfaces in one safe and easy step without using chemicals. Healthcare facilities (acute, long term care and retirement), as well as food services and educational facilities are benefiting from the amazing power of steam disinfection. Enjoy a 99.9999999% reduction in bacteria, spores, cells, biofilms, microorganisms you get the picture. Achieve the highest level of disinfection available while enjoying the best cleaning results! TANCS Equipped Steam Systems are featured in the Ontario Provincial Infectious Disease Advisory Committee s Best Practices Cleaning Document, as well as articles in AJIC, presentations at CHICA and articles in leading cleaning industry publications across North America!
VaporMagic has a copper boiler (explosion-proof material) with two external heating elements. Precise component devices such as the thermostat, pressurestat and solenoid valve, guarantee maximum safety by automatically controlling the function of the steamer. VaporMagic is equipped with a wide range of accessories, which enable you to clean even the most difficult and inaccessible places. This machine shines (almost as much as the surfaces you are cleaning!) when space is a concern and power is a must! Technical Specs - VaporMagic 160 C (320 F) Temperature 2.2L boiler 6 bar/88psi steam pressure 3 L water reservoir 2x750 watt replaceable external heating elements 120v 1ph 60hz 5-7min heating time from cold Produces 1.9kg/hour of steam Variable pressure control and 15 power cord $999
And now for something totally different. This unique system provides fingertip tool storage, hot water rinse and direct on board water storage with feed feature. This machine features our amazing red slide lock accessories, trigger style hose with handle control pressure settings and professional cleaning power. Technical Specs Pro 160 C (320 F) Temperature 2L boiler 6 bar/87psi 3 Litre water reservoir 1750 watt heating element 120v 1ph 60Hz 10 min heating time from cold $1799(unit) or $2199(package with trolley cart)
If you are looking for consistently high pressure from a portable 120V steamer then the GV 1.8 is the best choice you can make! An amazing 130PSI pressure with 3kg/hour steam volume combined with our outstanding assortment of red slide lock accessories will impress you with limitless cleaning power. Tackle baked on, built up, ground in and other tough cleaning challenges easily with this total package steam cleaning system. Also available in 220V option. Technical Specs GV 1.8 180 C (356 F) Temperature 3.5L boiler 9 bar/130psi steam pressure 5 Litre water reservoir 5 Litre solution reservoir 1800 watt replaceable heating element 120v 1ph 60Hz 7-10 min heating time from cold Produces 3kg/hour of steam Variable Pressure Control and Chemical Injection features $3499
The flex is a multi-use cleaning unit offering steam, steam extraction and wet-dry vacuum capabilities. Reduce time associated with cleaning and achieve professional results with this all in one system. Technical Specs - Flex 150 C (302 F) Temperature 3.5L boiler 6 bar/87psi steam pressure 5 Litre waste water reservoir 2L Detergent tank 1700 watt dual heating element 120v 1ph 60Hz 5 min heating time from cold Produces 4.5kg/hour of steam Variable Pressure Control and Vacuum features $4499
GV 3.3 is a model example of the difference in power between 110V and 220V Steam Cleaners! This unit supplies an awesome 4.5kg/hour of steam, which increases your cleaning speed, improves your results and offers the many other benefits of steam cleaning reduced water consumption and waste water production, reduced chemical use and run off, improved air quality, better results and longer asset life! The GV 3.3 has every heavy duty accessory that you will need to maximize the power heat for cleaning! Technical Specs GV 3.3 180 C (356 F) Temperature 3.5L boiler 9 bar/130psi steam pressure 5 Litre water reservoir 5 Litre solution reservoir 3300 watt replaceable heating element 220v 1ph 60Hz 7-9 min heating time from cold Produces 4.5kg/hour of steam Variable Pressure Control and Chemical Injection features $4999
Dry Steam Vapor doesn t add water to the cleaning process, so there isn t often much to wipe up when the cleaning is done. For tough dirt, Etna offers a Wet/Dry Vac to clean up loosened debris and soil. 220V power allows for powerful steam and vacuum performance combined into one awesome machine with great accessories and features. Technical Specs - Etna 165 C (329 F) Temperature 3.5L boiler 7 bar/100psi steam pressure 5 Litre water reservoir 5 Litre solution reservoir 2200 watt replaceable heating elements 220v 1ph 60hz 7-9 min heating time from cold Produces 4.5kg/hour of steam Variable Pressure Control and Chemical Injection features $3699
Practical, efficient and effective, this machine will meet every requirement of vehicle cleaning and detailing. A powerful vacuum motor collects wet and dry dirt in a steel vacuum drum with a 20L capacity. The power of steam combined with a wide range of accessories allows the Carwash steam cleaner to deeply clean and dry surfaces including car interiors and carpet. The three stage vacuum motor allows for effective drying, while the action of the hot air jet eliminates any residual humidity in the fibres. For car seats, the Carwash has a specific upholstery drying bag which provides thorough drying. Technical Specs - Carwash 150 C (302 F) Temperature (steam) 40 C (104 F) continuous hot water injection 70 C (158 F) hot air blower 2.8L boiler 5 bar/75psi steam pressure 10 Litre water reservoir 10 Litre solution reservoir 2300 watt replaceable external heating element 1400 watt vacuum 1400 watt hot air heating element 220v 1ph 60hz 5-8 min heating time from cold Produces 4.8kg/hour of steam Variable Pressure Control, Ozonator with built in timer and Chemical Injection features $3999
These units all feature high heat, low moisture steam at high pressure. By increasing the wattage and electrical supply we increase the volume of steam in each unit and, in turn, increase the intense steam volume and cleaning power! Technical Specs Vesuvio 10, 18 & 30 185 C (365 F) Temperature 18L boiler 10 bar/150psi steam pressure 25 Litre water reservoir 5 Litre solution reservoir Variable Pressure Control, Chemical Injection and external Water Hook Up for continuous fill Technical Specs Vesuvio 10 - $14999 10,000 watt replaceable heating element Available in 240/400/480/575V, 3ph 60hz 10 min heating time from cold Produces 15kg/hour of steam Technical Specs Vesuvio 18 - $17999 19,500 watt replaceable heating element Available in 400/480/575V, 3ph 60hz 7 min heating time from cold Produces 22.5kg/hour of steam Technical Specs Vesuvio 30 - $21999 30,000 watt replaceable heating element Available in 400/480/575V, 3ph 60hz 5 min heating time from cold Produces 37.5kg/hour of steam
These units all feature high heat, low moisture steam at high pressure with diesel firing options that mean you can enjoy the power of industrial dry steam without having industrial electrical access. Kolumbo 2 is so powerful you can even run 2 cleaning guns at the same time! Technical Specs Kolumbo and Kolumbo 2 185 C (365 F) Temperature 18L boiler 10 bar/150psi steam pressure 25 Litre water reservoir 25 Litre solution reservoir Variable Pressure Control, Chemical Injection features and external Water Hook Up for continuous fill Technical Specs Kolumbo - $6999 350 watt diesel fired burner Available in battery operated, 120/240V, 1 ph, 60hz 2 min heating time from cold Produces 37.5kg/hour of steam Technical Specs Kolumbo 2- $8999 350 watt diesel fired burner Available in 120/240V, 1 ph, 60hz 4 min heating time from cold Produces 47kg/hour of steam Simultaneous 2 gun operation
Shared Features of the DGF Series: Downstream Adjustable Chemical Injector: For low pressure soap and chemical injection. Quick Connect Hose Connectors: For easy on/off connections and tangle free hoses. Heavy Duty Steel Frame: Includes protective roll cage, mounting point for optional hose reel and a powder coated finish. Large Burner Temperature Dial: Adjust water temperature with ease. Easy Access On/Off Toggle Switch: Includes indicator light. Easy Access Control Panel: Makes servicing your machine fast and easy. Model H2527DGF Shown Above Stainless Steel Coil Skin: Durable rust resistant skin and Schedule 80 heating coil. 13 Pneumatic Tires: Ball bearing construction with a steel rim and hub assembly. Four Quick Connect Nozzles: Colour coded nozzles included are 0, 15, 25 and soap QC. Quality Gun and Lance Combination: Easy pull trigger with 48 lance.
50 High Pressure Hose: Durable non-marking steel braided hose. High Quality Triplex Plunger Pump: All Intersteam pressure washers include GP/Interpump pumps with solid ceramic plungers, thermal pump protector and limited 5 year warranty. Model H4035DGF Shown Above with Optional Hose Reel Replaceable Fuse: For electronic overload protection. Separate Unloader Valve: Diverts water pressure when trigger is not in use. Includes easily adjustable pressure control knob and all brass fittings. Large Fuel Tank: Holds up to 4.4 gallons of No. 1 or 2 Fuel Oil. Also includes a fuel indicator gauge. Other Features: High Pressure Blow Off Valve for added safety. 12v Beckett Burner means no external electricity required. MODEL H2527DGF MODEL H4035DGF 7.0 HP Subaru EX: Honda 13HP GX Gasoline Engine: OHC Gasoline Engine. Includes electric start and low oil alert. Operating Pressure (PSI): 2700 Volume (GPM): 2.5 Operating Pressure (PSI): 3500 Motor (HP): 7.0 Volume (GPM): 3.8 Pump Speed (RPM): 3600 Engine (HP): 13 BTU: 170,000 Pump Speed: 3600 Time Delay Shutdown: 12 Volt BTU: 300,000 Dimensions (LxWxH): 42 x18 x32 Unit Weight: 389 lbs Burner: 12 Volt Unit Dimensions (LxWxH): 42 x28 x43 Unit Weight: 440 lbs
Shared Features of the BGF Series: Downstream Adjustable Chemical Injector: For low pressure soap and chemical injection. Quick Connect Hose Connectors: For easy on/off connections and tangle free hoses. Honda GX / Subaru EH V Twin Gasoline Engine: Performance proven industrial gasoline engine with electric start and low oil alert system. Hour Meter: Ideal for scheduling regular service maintenance or rental applications. Protective Battery Box: Water-resistant plastic box for extra-protection against weathering. (Battery not included) Easy Access Control Panel: Improved layout of the operator control panel makes servicing your machine fast and easy. Stainless Steel Coil Skin and Burner Cover: Schedule 80 coil with 414,000 BTU burner. Large Burner Temperature Dial: Adjust water temperature with ease. Four Quick Connect Nozzles: Colour coded nozzles included are 0, 15, 25 and soap QC. Quality Gun, Lance & Hose Combination: Easy pull trigger with 48 lance and 4000 psi hose.
Separate Unloader with Easy Start Valve: Easy Start unloader valve to help start the engine with the gun closed. Interpump Triplex Plunger Pump with Ceramic Plungers: All Intersteam pressure washers include GP/Interpump pumps with solid ceramic plungers, thermal pump protector and limited 5 year warranty. Heavy Duty Skid Mount Steel Frame: Includes protective roll cage and a powder coated finish. Extra Large Fuel Oil Tank: Holds up to 16.0 gallons (60 L) of No. 1 or No. 2 Fuel Oil. Other Features: High Pressure Blow Off Valve: For added safety. 120v Beckett Burner: High BTU output. Includes 1800 watt generator. No external electricity required. Long Dual Drive Belt with Belt Tensioner: Ensures superior power and minimal maintenance. Easy Access To Fuel Tank: Easy side access of fuel tank for refuelling and service. Large Capacity Gas Tank: 9 gallon gas tank provides 8 hours of service. Compact Design: Uses less space. MODEL HACS5035BGF (features Subaru Engine) Operating Pressure (PSI): 3500 Volume (GPM): 5.2 Motor (HP): 20.5 Subaru EH Pump Speed (RPM): 1350 BTU: 414,000 Unit Dimensions (LxWxH): 48 x27 x45 Unit Weight: 650 lbs MODEL HAC5035BGF (features Honda Engine) Operating Pressure (PSI): 3500 Volume (GPM): 5.2 Motor (HP): 20.0 Honda GX Pump Speed (RPM): 1350 BTU: 414,000 Unit Dimensions (LxWxH): 48 x27 x45 Unit Weight: 650 lbs
Shared Features of all CRDG Series: Downstream Adjustable Chemical Injector: For low pressure soap and chemical injection. Quick Connect Hose Connectors: For easy on/off connections and tangle free hoses. Honda GX Gasoline Engine: Includes re-coil start and low oil alert system. Separate Unloader with Easy Start Valve: Diverts water pressure when trigger is not in use. Includes easily adjustable pressure control knob and all brass fittings. Clear Inlet Filter: Helps reduce contaminants from entering the pump. Chemical Basket: For easy chemical storage. Full Wrap-Around Frame For Complete Protection: With powder coated finish 10 Never-Go-Flat Tires: Ball bearing construction with a steel rim and hub assembly. Four Quick Connect Nozzles: Colour coded nozzles included are 0, 15, 25 and soap. Model CR3025DG Shown Above 50 High Pressure Hose: Durable non-marking steel braided hose. Quality Gun and Stainless Steel Lance Combination: Easy pull trigger with 36 lance
High Quality Triplex Plunger Pump: All Intersteam pressure washers include GP/Interpump pumps with solid ceramic plungers, thermal pump protector and limited 5 year warranty. Rubber Foot: Reduces vibration. Other Features: Pressure Gauge Cart includes Gun, Lance and Hose Holder OPTIONAL HOSE REEL AVAILABLE MODEL CR3025DG MODEL CR4035DG Operating Pressure (PSI): 2500 Operating Pressure (PSI): 3500 Volume (GPM): 3.0 Volume (GPM): 3.8 Motor (HP): 6.5 Motor (HP): 13 Pump Speed (RPM): 3600 Pump Speed (RPM): 3600 Dimensions Handle Up (LxWxH): 37 x26 x35 Dimensions Handle Up (LxWxH): 37 x26 x35 Unit Weight: 103 lbs Unit Weight: 155 lbs Model CR4035DG Shown Above with Optional Hose Reel
This awesome series offers the pricing of a cold water washer with the capability of higher temperature cleaning! Quick Connect Hose Connectors: For easy on/off connections and tangle free hoses. Baldor Electric TEFC Motor Thermally Protected Pump: Up to 190 F. Rubber Foot: Reduces vibration Flex Coupler: For longer pump and motor life. 5 Year Warranty: All Intersteam pressure washers include a 5 year limited warranty. Heavy Duty Stainless Steel Cart: Including Stainless Steel name plate and hose holder. 10 Never-Go-Flat Tires: Ball bearing construction with a steel rim and hub assembly. High Pressure Hose: Durable non-marking steal braided hose. C5004HTSS 30, C1904HTSS 50, C1904HTDS 50, C1904HTDS3D 50 Quality Gun and Lance Combination: Easy pull triggers with 36 lance. Separate Unloader: Diverts water pressure when trigger is not in use. Includes easily adjustable pressure control knob and all brass fittings. High Quality Interpump HT Series Triplex Plunger Pump: HT Series pumps can run hot water up to 185 F.
Other features: Brass Y Inlet Strainer, Gun and Lance Holder Model C5004HTSS Model C1904HTDS Operating Pressure: 500 Operating Pressure: 1900 Volume (GPM): 4.0 Volume (GPM): 4.0 Motor (HP): 1.5 Motor (HP): 5.0 Pump Speed: 1750 Pump Speed: 1750 Available Voltage (1 Phase): 115 Available Voltage (1 Phase): 230 Amps: 13.5 Amps: 22 Time Delay Shutdown: No Time Delay Shutdown: Yes Dimensions: 40 x22 x35 Dimensions: 40 x22 x35 Unit Weight: 100 lbs Unit Weight: 205 lbs Model C1904HTSS Model C1904HTDS3D Operating Pressure: 1900 Operating Pressure: 1900 Volume (GPM): 4.0 Volume (GPM): 4.0 Motor (HP): 5.0 Motor (HP): 5.0 Pump Speed: 1750 Pump Speed: 1750 Available Voltage (1 Phase): 230 Available Voltage (1 Phase): 575 V Amps: 22 (3-Phase) Time Delay Shutdown: No Amps: 5.7 Dimensions: 40 x22 x35 Time Delay Shutdown: Yes Unit Weight: 195 lbs Dimensions: 40 x22 x35 Unit Weight: 195 lbs
This unit will turn your cold pressure washer into a hot one you do need an existing cold water washer, or to purchase one in order to use this heater! Quick Connect Hose Connectors: For easy on/off connections and tangle free hoses. Pre-Drilled Pump Holes: For easy attachment of your own pumping unit. Large Burner Temperature Dial: Adjust water temperature with ease. Stainless Steel Coil Skin: Durable rust resistant skin and Schedule 80 heating coil. 13 Pneumatic Tires: Ball bearing construction with a steel rim and hub assembly. Cold Water Quick Connect: For easy connection to your cold water pressure washer. Large Fuel Oil Tank: Hold up to 8.8 gallons of No. 1 or 2 Fuel Oil. Also includes a fuel indicator gauge. Heavy Duty Steel Frame: Includes push handle with integrated hose holder, compact design and a powder coated epoxy finish. Other features: High pressure BlowOff Valve for added safety. 120V Beckett Burner with Easy Access On/Off Burner Switch Model MHG400F Operating Pressure (PSI): 3500 BTU: 315,000 Fuel: No. 1 or No. 2 Unit Dimensions (LxWxH): 54 x30 x45 Unit Weight: 380 lbs
High Limit Switch: For added safety. Cold Water Quick Connect: For easy connection to your cold water pressure washer. Burner Temperature Control: Adjust water temperature with ease. High pressure Blow Off Valve: For added safety. ¾ Schedule 80 pipe and Stainless Steel Target Plates in All Coils. Compact Design: Ideal for tight spaces and stationary applications. Large Fuel Oil Tank: Hold up to 8.8 gallons of No. 1 or 2 Fuel Oil. Also includes a fuel indicator gauge. Powder coated paint finish and Burner On/Off switch. Welded 7 gauge wrapped steel base and leg supports and welded inner coil for coil support. This series also features a removable service access panel. Model MHGSQ700F Operating Pressure (PSI): 3500 BTU: 700,000 Burner: 120V Wayne Heat Rise: 6 gpm @ 62 C (145 F) Fuel: No. 1 or No. 2 Unit Dimensions (LxWxH): 26 x26 x58 Unit Weight: 780 lbs Model MHGSQ900F Operating Pressure (PSI): 3500 BTU: 900,000 Burner: 120V Beckett Heat Rise: 10 gpm @ 60 C (140 F) Fuel: No. 1 or No. 2 Unit Dimensions (LxWxH): 26 x26 x64 Unit Weight: 878 lbs
This handheld steamer is great for light surface cleaning and garment steaming. This is portable, powerful and efficient which make it easy to clean hard to reach surfaces. Use only water to keep your home clean and refreshed. Technical Specs - Pronto 118 C (245 F) Temperature 295ML boiler 4 Bar/58PSI 1200 watt heating elements 120v 1ph 60Hz 2 min heating time from cold $99
Clean your whole home without chemicals or hassle. On board tool caddy for nozzle and brush storage compliment the garment steaming capability of this machine. Ideal for light chores where you re looking to make a big difference! Technical Specs Steam Dynamo 140 C (284 F) Temperature 1500ML boiler 3.5 bar/50psi steam pressure 1500 watt heating elements 120v 1ph 60Hz 7 min heating time from cold $199
The Reliable E3 Boiler Steam System introduces the features that professional cleaners love about steam into an affordable consumer model. Detachable steam hose, variable pressure control and a wide range of accessories allow you to clean your home to the healthiest it can be! Technical Specs Enviromate E3 150 C (302 F) Temperature 2000ML boiler 4 bar/58psi steam pressure 1780 watt heating element 120v 1ph 60Hz 10 min heating time from cold Features detachable 7 foot steam hose $499
The Reliable E5 Continuous Steam System allows for continuous steam cleaning at a really attractive price. This system also includes a bonus 7 piece accessory package since we know once you start steaming you won t want to stop! Detachable steam hose, variable pressure control and a wide range of accessories allow you to clean your home to the healthiest it can be! Technical Specs Enviromate E5 150 C (302 F) Temperature 2.2L Water Capacity Boiler and Reservoir 4 bar/58psi steam pressure 1450 watt heating elements 120v 1ph 60Hz 5 min heating time from cold $699
The Tandem has steam cleaning power combined with 70 micrometer HEPA filtration. This is a great tool for upholstery and other soft surface cleaning, as well as for areas with a lot of debris loosened in the cleaning process. Technical Specs - Tandem 150 C (302 F) Temperature 1.8L boiler 5 bar/72psi steam pressure 1700 watt dual heating element 120v 1ph 60Hz 5 min heating time from cold Variable Pressure Control and Vacuum features $1599
Distributed in North America by INTERSTEAM TECHNOLOGIES 170 Princess Street Hamilton ON L8L 3L3 1-800-281-4413 www.intersteam.com