Connected Control (BCC100) Wi-Fi Thermostat. Bosch Thermotechnology (625) PRODUCT CATEGORY: Controls and Instrumentation DATE PRODUCT WAS INTRODUCED TO THE CANADIAN MARKET: October 2017 IS THIS PRODUCT CSA (OR EQUIVALENT) APPROVED? No Connectivity, Weather Access, 5" Full-Color Touch Screen, Programmable, Compatibility, Alerts. Follows pre-set or user-defined schedule. 1. Large screen for ease-of-use and offline access. 2. Access your local weather forecast from your thermostat. 3. Compatible with majority of HVAC systems in the market. 4. Connected Control App for Remote Control. 5. Ability to work without Wi-Fi for those that do not wish to connect it to the internet.
CA30-CA - Capacitive IO-Link Sensor The new generation of CA30CA IO high performance capacitive sensors have an IP69K rating and approved by ECOLAB for cleaning- and disinfection agents, plus IO-Link communication. The 4th Generation of TRIPLESHIELDTM technology provides immunity to electromagnetic interference (EMI), and advanced protection from humidity and dust. This makes it ideal for Plastic & Rubber, Agriculture, Food & Beverage and Material handling applications. Carlo Gavazzi Canada Inc. (355) DATE PRODUCT WAS INTRODUCED TO THE CANADIAN MARKET: April 2018 Our advanced functionalities - QoR (Quality of Run), QoT (Quality of Teach) and diagnostic parameters are fully customizable and run in "Standard or IO-Link Mode" with more than half a million combinations. THIS PRODUCT IS: Sustainable, Energy Efficient, Water Efficient Will increase the performance of machinery and can provide early warning of maintenance issues such as temperature and sensing drift. There is reduced PLC functionality by utilizing internal programming modes such as single or dual set points, logic functions and timer functions. 1. M18 and M30 housing. 2. Programmable sensing distance and hysteresis. 3. Sensing mode: single point, two point and windows mode. 4. Logic functions: AND, OR, XOR and Gated SR/FF. 5. Timer functions: ON, OFF and One shot from. 6. Configurable output/input: NPN, PNP, Push-Pull and external input. 7. Alarm outputs: temperature and dust - with adjustable setpoints. 8. Logging functions: temperatures, operational hours, power cycles, configuration changes. 9. Detection filter.
10. Application modes: Standard, Plastic. 11. M18 and M30 housing. 12. Programmable sensing distance and hysteresis. 13. Sensing mode: single point, two point and windows mode. 14. Logic functions: AND, OR, XOR and Gated SR/FF. 15. Timer functions: ON, OFF and One shot from. 16. Configurable output/input: NPN, PNP, Push-Pull and external input. 17. Alarm outputs: temperature and dust - with adjustable setpoints. 18. Logging functions: temperatures, operational hours, power cycles, configuration changes. 19. Detection filter. 20. Application modes: Standard, Plastic or Level applications. 21. Quality of Run (QoR) and Quality of Teach (QoT).
NRG - Solid State Relay The NRG is a system consisting of one or more BUS chains that communicate with the main controller in the machine through Modbus RTU over an RS485 interface. The communication interface in the NRG system allows read out of variables such as voltage, current, frequency, energy consumption and power of the solid state relays RG..N in real time. Carlo Gavazzi Canada Inc. (355) DATE PRODUCT WAS INTRODUCED TO THE CANADIAN MARKET: July 2018 IS THIS PRODUCT CSA (OR EQUIVALENT) APPROVED? Yes The accessibility of real-time data with the NRG series allows machine builders to distinguish their solutions by offering added value with smarter machines that ultimately result in cost savings for the end user. Use of real-time data for prevention of machine stoppages during operation. Real-time monitoring allows timely decisions for better machine and processes management. Reduced PLC due to AutoConfiguration and bus connect. 1. Fieldbus interface. Solid state relay parameters and diagnostic data are accessible through Modbus RTU over an RS485 interface. 2. Reduced maintenance costs and downtime. Use of real-time data for prevention of machine stoppages during operation. 3. Good quality products and low scrap rates. Real-time monitoring allows timely decisions for better machine and processes management. 4. Reduced efforts in troubleshooting. A number of faults can be distinguished to facilitate and reduce troubleshooting time. 5. Versatile. Easy integration in existing machines as the control of the solid-state relay does not change compared to a solid-state relay without a communication interface. 6. Fast installation and set-up.
ECO-0550 Geothermal Control The ECO-0550 covers a multitude of geothermal applications, reducing the variety of controls needed for varying applications. It is designed to operate equipment in a 2 or 4 pipe, single or dual tank hydronic heating and cooling system. The control can accommodate to stage heat pumps, a backup boiler, and reversing valve for complete system coverage and extensive flexibility. The control can accommodate for outdoor reset or maintain set tank temperature. HBX Controls Systems Inc. (532) DATE PRODUCT WAS INTRODUCED TO THE CANADIAN MARKET: September 2018 The ECO-0550 now has a built in Wi-Fi communication protocol. Users can now remotely monitor/adjust parameters and receive alarm notifications using the HBX mobile app. The control also features a new setting called EcoSwitch to save on energy consumption. The EcoSwitch feature allows you to lockout your heat pumps and run the backup boiler only on a timed schedule, allowing you to save on energy and lower your utility bills during peak time periods (switch from electric to gas). The schedule can be set for 4 different times per day for weekends and weekdays. 1. Wi-Fi Enabled with easy setup. 2. EcoSwitch Operate heats or backup boiler on timed schedule. 3. Single/dual tank systems. 4. Operate 3 stages including backup. 5. Operate reversing valves.
SensorLinx Metering System The SensorLinx Sensor System measures the energy used or transferred in a liquid heating and cooling application including HVAC, Solar thermal and Geothermal. Utilizing precision matched temperature sensors provides excellent differential accuracy that provides accurate data to calculate totalized usage and allocate cost. The system incorporates Wi-Fi communicate which allows for easy setup and remote monitoring via a smartphone. HBX Controls Systems Inc. (532) DATE PRODUCT WAS INTRODUCED TO THE CANADIAN MARKET: October 2018 These sensors can be used to monitor system flow, pressure, supply/return temperatures in real time which can be used to balance your hydronic system and act as a safety control. The sensors provide accurate data required to prevent energy waste and reduce costs allocated to heating and water consumption. 1. Small footprint which allows for easy installation. 2. Alarms based on flow, temperature and pressure. 3. Less expensive monitoring solution in the industry!! 4. Triac output for relay operation. 5. External strap on thermistor for simple BTU calculations. 6. Multiple fluid calculations.
7. Easy Wi-Fi and app setup. 8. Pair sensors wirelessly.
HeatLink Smart System The HeatLink Smart System includes thermostats, modules, actuators, and relays to wirelessly control a heating system. The addition of smart plugs and sensors expand the system into security and lifestyle. The heart of the system is the Wireless Internet Gateway. The Gateway coordinates the devices, and connects to the building's Internet to create a secure path to the HeatLink Smart System app. HeatLink Group Inc. (525) DATE PRODUCT WAS INTRODUCED TO THE CANADIAN MARKET: August 2018 Wireless communication allows devices to be installed in locations previously not possible and without pulling cable. The Smart System app allows users to remotely monitor and control their system. Thermostats can be easily programmed with schedules to lower room temperatures to save energy. Smart plugs allow users to monitor their electricity usage. 1. Wireless communication. Save the time and cost of running wires. 2. Control your system from anywhere. User friendly Web, Android and ios apps available. The app includes customizable schedules and rules. 3. System devices can be added, deleted, or configured quickly and easily using the app. The system can be setup without internet access (offline). When internet access is available the system can then be app enabled (online).
EZconnex Float Connection System Revolutionary new way to install and maintain float switches in a wet well. Simply install the wiring manifold, plug in the EZconnex quick release (pinch and pull) float switches, and wire the single manifold cable to the control panel. The manifold cable contains colored wire pairs that match a color identification system on the manifold housing for easy field wiring. SJE Rhombus (101) DATE PRODUCT WAS INTRODUCED TO THE CANADIAN MARKET: August 2018 IS THIS PRODUCT CSA (OR EQUIVALENT) APPROVED? Yes WHAT IS NEW INNOVATIVE OR AMAZING ABOUT THIS PRODUCT? Quick release connections (pinch and pull) for easy installation/maintenance; color wired pairs match colored caps on the house for easy identification; one cable from manifold to control panel for easy wiring connection. Saves up to 75% installation and maintenance time over traditional methods. 1. Saves installers and maintenance people time with the simple pinch and pull float connections; 2. Saves installation time by running only one wire from manifold to control panel; 3. Rated for short term submersion; 4. Rubber boot provides a dual seal design for an extra layer of protection to keep connection clean and dry; 5. Manifold housing includes colored caps that match red/blue/yellow/white wire pairs in the manifold cable for easy identification/wiring; 6. Can be used with 1-4 float switches for a wide variety of applications; 7. Five-year limited warranty.
Maestro MAESTRO is the first smart thermostat compatible with all your electric heating devices, such as baseboards, convectors and fan heaters. As the heart of your heating ecosystem, the MAESTRO controller thermostat not only offers multiple features through its mobile app, it also gives you peace of mind, optimizes your comfort and saves energy. The MAESTRO solution is intuitive, accessible and smart. Stelpro (209) DATE PRODUCT WAS INTRODUCED TO THE CANADIAN MARKET: January 2018 The Maestro smart thermostat combines design and technology to orchestrate a whole new level of comfort for home electric heating. A color code makes the user aware of the impacts of his heating choices. The scale starts at green, indicating a comfortable choice balanced with an ecofriendly choice, all the way to red indicating that comfort takes priority over energy savings. This behavioral design is further reinforced by energy consumption reports that show the detailed result of the choices made. 1. SIMPLE AND INTUITIVE MOBILE APP Control at your fingertips with your smartphone or mobile device. 2. ENERGY MANAGEMENT SOLUTIONS For increased energy efficiency. 3. CREATE PERSONALIZED ACTIVITIES That integrate easily into the smart home. 4. GEOFENCING FEATURE For optimal energy efficiency.
Technologic PPS The Technologic PPS is an advanced specific purpose programmable controller that allows precision control of building pumps to maximize energy savings with real time pump optimization. Xylem Applied Water Systems (243) DATE PRODUCT WAS INTRODUCED TO THE CANADIAN MARKET: November 2017 Advanced algorithm for sensored or sensorless control of up to 8 pumps in parallel. The user will have the ability to model the pump performance based on building demand more accurately and display in real time., Water Efficient, Sustainable The Technologic PPS solution monitors changes in system demand via input sensors in the system or preprogrammed algorithms in sensorless mode. The building system control curve is programmed for accurate pump control without unnecessary pump overboosting, resulting in improved energy savings. 1. Up to 8 pumps in parallel. 2. Standard building communications. 3. Real time performance display. 4. Embedded field adjustable system control curve. 5. Performance modeling.