of 66 5/18/2015 1:01 PM Second Revision No. 36-NFPA 32-2015 [ Detail ] 6.5 Solvents (See Annex C for additional information on solvents) Submittal Date: Tue Mar 17 17:20:03 EDT 2015 Committee Statement: Response Message: Annex C has been added to the document. This information needs to be balloted separate referencing Annex C.
of 66 5/18/2015 1:01 PM Second Revision No. 1-NFPA 32-2015 [ Section No. 1.2.1 ] 1.2.1 This standard prescribes safeguards intended to prevent fires and explosions, and other related hazards involving drycleaning, and associated wetcleaning, and/or laundry processes and to minimize the personal injury and property damage consequences of such incidents. Submittal Date: Tue Mar 10 10:11:37 EDT 2015 Committee Statement: The scope of the standard deals with a primary main occupancy containing drycleaning processes, not primarily wetcleaning and laundry. Readers of the standard may believe that this standard should be used when designing Laundromats or incidental laundry rooms that are not associated with drycleaning facilities. Response Message: Public Comment No. 3-NFPA 32-2014 [Section No. 1.2.1]
of 66 5/18/2015 1:01 PM Second Revision No. 58-NFPA 32-2015 [ Section No. 2.4 ] 2.4 References for Extracts in Mandatory Sections. NFPA 30, Flammable and Combustible Liquids Code, 2015 edition. NFPA 36, Standard for Solvent Extraction Plants, 2013 edition. NFPA 58, Liquefied Petroleum Gas Code, 2014 edition. NFPA 70, National Electrical Code, 2011 2014 edition. NFPA 79, Electrical Standard for Industrial Machinery, 2015 edition. NFPA 86, Standard for Ovens and Furnaces, 2015 edition. NFPA 99, Health Care Facilities Code, 2015 edition. Organization: National Fire Protection Assoc Submittal Date: Tue Mar 31 09:19:43 EDT 2015 : updated to current edtion of NFPA 70.
of 66 5/18/2015 1:01 PM Second Revision No. 7-NFPA 32-2015 [ Section No. 3.3.6 ] 3.3.6 Conversion. Any modification(s) made to newor existing drycleaning equipment that permits the use of a solvent of a different class or permits a change to a different solvent in the same class, other than that which is specified on the original manufacturer s specifications and product nameplate. (See also, Section 6.2.) Submittal Date: Mon Mar 16 08:12:57 EDT 2015 Committee Statement: Response Message: The term conversion is no longer used in the document. Changes to solvents and changes to equipment are explained in the document with requirements but the term conversion is no longer used.
of 66 5/18/2015 1:01 PM Second Revision No. 8-NFPA 32-2015 [ Section No. 3.3.9 ] 3.3.8 Drycleaning. The process of removing dirt, grease, paints, and other stains from such items as apparel, textiles, fabrics, and rugs by use of nonaqueous liquids. Submittal Date: Mon Mar 16 08:17:04 EDT 2015 Committee Statement: Response Message: Annex material to be deleted since it did not add any information of substance to the definition. Asterisk removed.
Second Revision No. 9-NFPA 32-2015 [ Section No. 3.3.13 ] 3.3.12 Dryer. Unless otherwise specified as a laundry dryer, the term dryer refers to a drycleaning dryer. 3.3.12.1 Drycleaning Dryer. A piece of equipment used to dry apparel, textiles, fabrics, and rugs that were cleaned with drycleaning solvents. 3.3.12.2 Laundry Dryer. Any equipment in which water-cleaned textiles are tumbled, agitated, and dried or deodorized while heated air circulates through the load to remove the water. 3.3.12.3 Reclaiming Dryer. A piece of equipment used to dry and reclaim solvents from textiles thereby limiting fugitive emissions. 3.3.12.4 Wetcleaning Dryer. Any equipment with a humidistat in which water-cleaned textiles are tumbled, agitated, and dried or deodorized while heated air circulates through the load to remove the water. Submittal Date: Mon Mar 16 08:19:12 EDT 2015 Committee Statement: Response Message: The term dryer alone is not used in the document. Each time the term is used it has been described as a drycleaning, laundry, reclaiming or wetcleaning dryer to ensure that the proper requirements are applied. The term wetcleaning dryer has been added and defined. of 66 5/18/2015 1:01 PM
Second Revision No. 10-NFPA 32-2015 [ Section No. 3.3.14 ] 3.3.13 Equipment (Drycleaning Equipment). Any equipment in which textiles are immersed or nonimmersed non-immersed, agitated in solvent, or in which drycleaning solvent is reclaimed from textiles and/or dried. 3.3.13.1 Version I Equipment. An open system, employing combustible or noncombustible liquid, that is continuously open to the atmosphere. 3.3.13.2 Version II Equipment. An open-circuit system, employing combustible or noncombustible liquid, that releases fugitive emissions, suppresses and controls combustion, and that has safety controls. 3.3.13.3 Version III Equipment. A closed-loop system, employing combustible or noncombustible liquid, that does not release emissions, prevents combustion, and that has safety controls. 3.3.13.4 Version IV Equipment. A closed-loop system for noncombustible liquids that has safety controls for noncombustible liquids and that does not release emissions. Supplemental Information File Name A3.3.14.docx Description Submittal Date: Mon Mar 16 08:31:25 EDT 2015 Committee Statement: Response Message: The definitions have been clarified by specifying the types of liquids used in the various versions of equipment. Asterisks have been added to Version I-III equipment definitions since there is annex material specifically attached to those definitions. of 66 5/18/2015 1:01 PM
A.3.3.14 Examples include reclaiming dryers, drycleaning dryers, drycleaning washers
Second Revision No. 11-NFPA 32-2015 [ Section No. 3.3.16 ] 3.3.15 Facility (Drycleaning Facility). An occupancy in which drycleaning and associated mercantile operations are conducted, which can include an office, a retail counter, storage rooms, garment racks and conveyors, boiler rooms, shipping and receiving areas, and a drive-up service area. The facility type is defined based on the lowest numerical class of solvent used in the equipment. 3.3.15.1* Type I Facility. Facilities employing class Class I solvents. 3.3.15.2* Type II Facility. Facilities employing class Class II solvents. 3.3.15.3* Type III Facility. Facilities employing class Class IIIA and IIIB solvents. 3.3.15.4* Type IV Facility. Facilities employing class Class IV solvents. Supplemental Information File Name A.3.16.1-3.3.16.4.docx Description Submittal Date: Mon Mar 16 08:46:26 EDT 2015 : Annex material added to assist the user in applying the definition. of 66 5/18/2015 1:01 PM
A.3.3.16.1-A.3.3.16.4 Facility type is defined based on the lowest numerical class of solvent. Facilities employing multiple drycleaning solvents in different solvent classes, blended or unadulterated, are defined by the solvent in the numerically lowest class of solvent. A facility, may use Class III and Class IV solvents but since the Type of facility is based on the lowest numerical class it would be considered a Type III facility.
of 66 5/18/2015 1:01 PM Second Revision No. 15-NFPA 32-2015 [ New Section after 3.3.22 ] 3.3.25 Intrinsically Safe. As applied to equipment and wiring, equipment and wiring that are incapable of releasing sufficient electrical energy under normal or abnormal conditions to cause ignition of a specific hazardous atmospheric mixture. (HYP) [ 99, 2015] Submittal Date: Mon Mar 16 09:14:41 EDT 2015 : Added new definition.
Second Revision No. 12-NFPA 32-2015 [ Sections 3.3.24, 3.3.25 ] 3.3.26 LEL. Lower Explosive Limit See 3.3.183.3.18.1, Lower Flammable Limit. 3.3.27 LFL. Lower Flammable Limit See 3.3.183.3.18.1, Lower Flammable Limit. Submittal Date: Mon Mar 16 08:57:29 EDT 2015 : Better clarifies the acronyms and cross references. 0 of 66 5/18/2015 1:01 PM
1 of 66 5/18/2015 1:01 PM Second Revision No. 13-NFPA 32-2015 [ Section No. 3.3.26.1 ] 3.3.28.1 Class I Solvents. Liquids having a flash point below 22.8 C 38 C (73 F 100 F ). Submittal Date: Mon Mar 16 09:02:40 EDT 2015 : Corrected error in definition of Class I liquid.
Second Revision No. 14-NFPA 32-2015 [ Sections 3.3.31, 3.3.32 ] 3.3.33 UEL. Upper Explosive Limit. See 3.3.193.3.18.2, Upper Flammable Limit. 3.3.34 UFL. Upper Flammable Limit. See 3.3.193.3.18.2, Upper Flammable Limit. Submittal Date: Mon Mar 16 09:04:30 EDT 2015 : Better describes the acronyms and provides cross references. 2 of 66 5/18/2015 1:01 PM
Second Revision No. 16-NFPA 32-2015 [ Section No. 4.2.1 ] 4.2.1 Class I Solvents. Class I solvents used shall be prohibited in drycleaning equipment shall be prohibited. 4.2.2* Change of Solvents. A change of solvents from a higher to a lower class of solvent for use in existing equipment shall be prohibited. Supplemental Information File Name A.4.2.2.docx Description Submittal Date: Tue Mar 17 15:29:26 EDT 2015 Committee Statement: Response Message: This information was included in the previous TIA on conversions. In order to emphasize the potential hazard created by converting from a higher class solvent to a lower class solvent the committee added this in the prohibited activities section of the document. Annex material explains the reason for the prohibition. 3 of 66 5/18/2015 1:01 PM
A.4.2.2 For example, equipment designed for Class IV solvents cannot be used for Class III or II solvents. The Committee is unaware of any acceptable conversions in which a machine using a higherclass solvent has been converted to a lower-class solvent which is why this has been prohibited by the Standard
4 of 66 5/18/2015 1:01 PM Second Revision No. 17-NFPA 32-2015 [ Section No. 4.2.5 ] 4.2.6 Wetcleaning of Textiles That Have Been Drycleaned or Laundry Dryers. Textiles cleaned in with a nonaqueous solvent shall not be dried in a laundry or wetcleaning dryer. Submittal Date: Tue Mar 17 15:40:52 EDT 2015 Committee Statement: Response Message: The requirements of this section apply to both types of dryers. Both dryer types have been defined in the document.
5 of 66 5/18/2015 1:01 PM Second Revision No. 18-NFPA 32-2015 [ Section No. 4.3.2.2 ] 4.3.2.2 The drycleaning facility shall be located not less than 3 m (10 ft) from the line of an adjoining property, unless the wall facing the line of the adjoining property has a fire resistance rating of not less than 2 hours without openings. in accordance with the provisions of NFPA 5000. Submittal Date: Tue Mar 17 15:43:22 EDT 2015 Committee Statement: Response Message: The committee reviewed this requirement and found that it was in the first edition of NFPA 32 from 1925. At that time, most of the solvents in use were Class I solvents, with some Class II solvent use on occasion. Currently Class I solvents are prohibited in drycleaning facilities and the use of Class II solvents is rare. The committee believes that the appropriate document for construction and location requirements is NFPA 5000 (which incorporates NFPA 30 requirements) and that NFPA 32 should not be establishing these requirements.
Second Revision No. 19-NFPA 32-2015 [ Section No. 4.4.2 ] 4.4.2 Ventilation. Ventilation of all types of drycleaning facilities shall be in accordance with all applicable codes and the public in accordance with all applicable government regulations. 4.4.2.1 Ventilation for Type II facilities shall be in accordance with Chapter 7. Submittal Date: Tue Mar 17 16:04:53 EDT 2015 Committee Statement: The committee removed this verbiage since in all cases applicable government regulations would apply. 6 of 66 5/18/2015 1:01 PM
7 of 66 5/18/2015 1:01 PM Second Revision No. 20-NFPA 32-2015 [ Section No. 4.4.3.2 ] 4.4.3.2 Drycleaning equipment shall be separated from apparatus with open flames or exposed electric heating elements by one of the following means: (1) Ensuring that Providing air intakes are provided for combustion air (2) Ensuring that Locating exhaust vents from the equipment are located, if they exist, remotely from the air intakes of the apparatus Submittal Date: Tue Mar 17 16:07:19 EDT 2015 : Clarified requirement.
Second Revision No. 21-NFPA 32-2015 [ Section No. 4.4.4 ] 4.4.4 Solvent Containment. 4.4.4.1 Drycleaning departments shall be designed to prevent the discharge of solvents or solvent waste streams to public waterways, public sewers, or adjoining properties. 4.4.4.2 Where containment pans are not located under the drycleaning equipment, curbs Curbs, dikes, or a special drainage system shall be required to control the migration of spilled solvent unless otherwise indicated in 4.4.4.2.1. 4.4.4.2.1 Facilities that have containment pans under the drycleaning equipment do not need further containment. Submittal Date: Tue Mar 17 16:10:28 EDT 2015 : Rearranged requirements so provided in logical order. 8 of 66 5/18/2015 1:01 PM
9 of 66 5/18/2015 1:01 PM Second Revision No. 22-NFPA 32-2015 [ Section No. 4.5.2.3 ] 4.5.2.3 Opening into boiler Boiler rooms in a Type III facility with Version III equipment shall be allowed to open directly into the drycleaning department where only Class III solvents are used in the listed equipment, provided the openings is protected in accordance with 4.5.2.1 and is at least 10 ft (3 m) from any equipment. Submittal Date: Tue Mar 17 16:13:34 EDT 2015 : Cleaned up verbiage.
Second Revision No. 23-NFPA 32-2015 [ Section No. 4.6.3 ] 4.6.3 Automatic Fire-Extinguishing Systems. Where required by this standard, automatic fire-extinguishing systems, including, but not limited to, water mist carbon dioxide systems, clean agent,, and carbon dioxide systems, and water mist shall be installed in accordance with the applicable reference standard. 4.6.3.1 Carbon Dioxide Fire-Extinguishing Systems. Carbon dioxide fire-extinguishing systems shall comply with NFPA 12. 4.6.3.2 Clean Agent Fire-Extinguishing Systems. Clean agent fire-extinguishing systems shall comply with NFPA 2001. 4.6.3.3 Water Mist Fire-Extinguishing Systems. Water mist fire-extinguishing systems shall comply with NFPA 750. 4.6.3.5 Carbon Dioxide Fire-Extinguishing Systems. Carbon dioxide fire-extinguishing systems shall comply with NFPA 12. 4.6.3.6 Clean Agent Fire-Extinguishing Systems. Clean agent fire-extinguishing systems shall comply with NFPA 2001. 4.6.3.7 Water Mist Fire-Extinguishing Systems. Water mist fire-extinguishing systems shall comply with NFPA 750. 4.6.4 Inspection, Testing, and Maintenance. Except for approved steam-injection extinguishing systems, automatic fire-extinguishing systems shall be periodically inspected, tested, and maintained in accordance with the applicable reference standard and the manufacturer's operation and maintenance procedures. 4.6.4.1 Approved steam-injection extinguishing systems shall be inspected at least annually in accordance with the manufacturer s specifications. 4.6.5 Portable Fire Extinguishers. Portable fire extinguishers shall be installed and maintained throughout the drycleaning facility in accordance with NFPA 10. Submittal Date: Tue Mar 17 16:15:55 EDT 2015 : Relocated extinguishing systems to the proper section of the document. 0 of 66 5/18/2015 1:01 PM
1 of 66 5/18/2015 1:01 PM Second Revision No. 2-NFPA 32-2015 [ Section No. 5.1 [Excluding any Sub-Sections] ] This chapter shall apply to drycleaning and associated wetcleaning and laundering operations, training, and equipment maintenance as it relates to fire and other related hazards. Submittal Date: Tue Mar 10 14:18:17 EDT 2015 Committee Statement: The scope of the standard deals with a primary main occupancy containing drycleaning processes, not primarily wetcleaning and laundry. Readers of the standard may believe that this standard should be used when designing Laundromats or incidental laundry rooms that are not associated with drycleaning facilities. Response Message: Public Comment No. 4-NFPA 32-2014 [Section No. 5.1 [Excluding any Sub-Sections]]
2 of 66 5/18/2015 1:01 PM Second Revision No. 24-NFPA 32-2015 [ Section No. 5.1.2 ] 5.1.2 Training on operating procedures Operator training shall be directly applicable specific to the equipment and solvents used in the facility and shall be consistent with safety requirements and the equipment and solvent manufacturers recommendations. Submittal Date: Tue Mar 17 16:24:07 EDT 2015 : Cleaned up language.
3 of 66 5/18/2015 1:01 PM Second Revision No. 25-NFPA 32-2015 [ Section No. 5.2.2 ] 5.2.2 Operating Procedures. Routine and emergency condition procedures shall be established for the following: (1) Equipment operation, including equipment parameters and prohibited procedures (2) Solvent handling (3) Spotting, with emphasis on proper removal of spotting agents prior to processing, if applicable. (4) Waste handling (5) Lockout/Tagout procedures Submittal Date: Tue Mar 17 16:25:13 EDT 2015 Committee Statement: The committee wanted lockout/tagout to be listed since it is an important part of operating procedures.
4 of 66 5/18/2015 1:01 PM Second Revision No. 26-NFPA 32-2015 [ Section No. 5.4.6 ] 5.4.6 The training shall ensure that all employees are knowledgeable about the applicable safety requirements for their job jobs, including the following: (1) Hazards of their workplace, including chemical hazards (2) General facility safety rules (3) The necessity for proper functioning or related fire and explosion protection systems (4) Equipment maintenance requirements and practices (5) Housekeeping policies and procedures (6) Emergency response plans and procedures (7) Basic PPE requirements (8) Start-up, shutdown, and lockout/tagout procedures (9) Safety data sheet (SDS) requirements Submittal Date: Tue Mar 17 16:27:28 EDT 2015 Committee Statement: The committee added SDS sheets to emphasize the requirement for employee training on SDSs.
Second Revision No. 27-NFPA 32-2015 [ Sections 5.5.1, 5.5.2 ] 5.5.1 The facility owner or the facility owner s representative shall verify that all employees have been trained in equipment use, spotting, and waste handling as outlined in 5.4.3. 5.5.2 All employee training shall be documented and include the type method of training and the date the training was completed. Submittal Date: Tue Mar 17 16:30:21 EDT 2015 : Cleaned up language and provided cross reference to section on waste handling. 5 of 66 5/18/2015 1:01 PM
6 of 66 5/18/2015 1:01 PM Second Revision No. 28-NFPA 32-2015 [ Chapter 6 [Title Only] ] General Equipment and Solvent Requirements Submittal Date: Tue Mar 17 16:33:49 EDT 2015 : This chapter refers to both solvent and equipment requirements.
7 of 66 5/18/2015 1:01 PM Second Revision No. 31-NFPA 32-2015 [ Section No. 6.1.1 ] 6.1.1 All drycleaning equipment shall comply with the provisions of and be listed and labeled to comply with this chapter The requirements of this chapter shall apply to all drycleaning equipment. Submittal Date: Tue Mar 17 16:40:38 EDT 2015 : Listing and labeling requirements are already included in the chapter requirements.
8 of 66 5/18/2015 1:01 PM Second Revision No. 30-NFPA 32-2015 [ Section No. 6.1.2 ] 6.1.2 All solvent in a facility and employed in drycleaning equipment shall comply with the provisions of this chapter and with the specific applicable requirements of Chapters 7 through 10, depending on the type of facility. Submittal Date: Tue Mar 17 16:39:27 EDT 2015 : Proper term is applicable, not specific.
9 of 66 5/18/2015 1:01 PM Second Revision No. 29-NFPA 32-2015 [ Section No. 6.1.3 ] 6.1.3 Where a change in solvent class is proposed for use with existing equipment, the specific requirements of Section 6.2 and the applicable requirements of Chapters 7 through 10 applicable to the new solvent class shall be met 10 shall apply. 6.1.3.1 Where there is a change in the version of equipment is proposed, the specific requirements of Section 6.3 and the applicable requirements of Chapters 7 through 9 applicable to the new equipment shall be met shall apply. Submittal Date: Tue Mar 17 16:35:35 EDT 2015 Committee Statement: References to the applicable sections in Chapter 6 were added and language was cleaned up.
0 of 66 5/18/2015 1:01 PM Second Revision No. 4-NFPA 32-2015 [ Section No. 6.1.4 ] 6.1.4 Equipment and solvent manufacturers and/or suppliers shall provide the facility operator with written instructions covering proper installation and safe use and operation. Submittal Date: Tue Mar 10 15:13:57 EDT 2015 Committee Statement: The committee agreed that suppliers in some cases are the ones who will provide instructions. Instructions should not just accompany the equipment and solvent but should be provided to the facility operator to ensure that the facility operator is held accountable to ensure that instructions are followed and that equipment and solvent are compatible. Response Message: Public Comment No. 5-NFPA 32-2014 [Section No. 6.1.4]
Second Revision No. 32-NFPA 32-2015 [ Section No. 6.2 ] 6.2 Change of Solvent. 6.2.1 Change of Solvent in a Different Class. The AHJ shall be notified of a proposed change in solvent class, in accordance with 1.5.1. 6.2.1.1 A change from a higher to a lower class of solvent for use in existing equipment shall be prohibited. 6.2.1.2 Where an existing facility proposes a change in solvent class with new equipment, the provisions of Chapters 4 through 9 shall be met for the new class of solvent. 6.2.1.3 The AHJ shall be notified of a proposed change in solvent class, in accordance with 1.5.1. 6.2.2 Where a change in solvent class is proposed for use with new or existing equipment, the provisions of Chapters 4 through 9 shall be met for the new solvent. 6.2.2 Change of Solvent Within the Same Class. A change of solvent within the same solvent class shall be allowed if one of the following conditions has been met: (1) The original equipment manufacturer accepts the solvent for use in the machine as indicated on the nameplate. (2) The facility owner has written documentation for the use of the solvent in the machine by the original equipment manufacturer. (3) The solvent manufacturer has obtained authorization from the equipment manufacturer for use of the solvent in the equipment. 6.2.3 Explosion Protection Hazards associated with the conversions described in 1.3.1.1 shall be provided with explosion protection in accordance with Equipment with explosion hazards resulting from modification of existing equipment or change in solvent class from a previous approval shall be provided with explosion protection, in accordance with NFPA 69. Submittal Date: Tue Mar 17 16:55:47 EDT 2015 Committee Statement: Response Message: The requirements associated with a change of solvent both within the same class and with different classes were rewritten and included in Chapter 6. 1 of 66 5/18/2015 1:01 PM
Second Revision No. 33-NFPA 32-2015 [ Section No. 6.3 ] 6.3 Change in Version of Drycleaning Equipment in Existing Facilities. 6.3.1 The AHJ shall be notified of a proposed change in the version of equipment, in accordance with 1.5.1. 6.3.2 Where a change in the version of equipment occurs, the applicable provisions of Chapters 6 through 9 shall apply. Submittal Date: Tue Mar 17 17:01:56 EDT 2015 Committee Statement: Response Message: A change in version of drycleaning equipment is of concern in existing facilities since the electrical classifications of the equipment may not be appropriate for the class of solvent already in use. 2 of 66 5/18/2015 1:01 PM
3 of 66 5/18/2015 1:01 PM Second Revision No. 35-NFPA 32-2015 [ Section No. 6.5.3 ] 6.5.3 All solvents Solvents used in equipment shall meet not be used unless they meet one of the following requirements: (1) The original equipment manufacturer shall obtain has provided authorization to use the solvent in the equipment as authorization to use the solvent in the equipment as indicated identified on the nameplate. (See Annex C.) (2) (3) * The solvent manufacturer shall provide test data and/or independent third-party documentation, including flashpoint, UFL, LFL, stability, and corrosivity for the machine. The original equipment manufacturer has provided written documentation authorizing the use of the solvent in the equipment. * A qualified testing laboratory or inspection agency concerned with product evaluations has provided evidence of solvent testing and equipment evaluation indicating the solvent can be used in the equipment. Supplemental Information File Name A6.5.3_3_.docx Description Submittal Date: Tue Mar 17 17:15:04 EDT 2015 Committee Statement: The type of documentation to show that a solvent is acceptable for use in equipment has been clarified.
A.6.5.3(3) Qualified testing laboratories may include third party independent laboratories or Nationally Recognized Testing Laboratories. Testing may include flashpoint, UFL, LFL, stability and corrosivity of the solvent.
Second Revision No. 34-NFPA 32-2015 [ Section No. 6.5.4 ] 6.5.4 Flash Point and Flammability Limits. 6.5.4.1* The solvent manufacturer shall be responsible for certifying the lower and upper flammability limits of the solvent under the anticipated conditions of drycleaning operations. 6.5.4.2 The solvent manufacturer shall be responsible for certifying the flash point of the solvent under the anticipated conditions of drycleaning operation operations. 6.5.4.3 The flash point of a solvent shall be determined in accordance with NFPA 30. Submittal Date: Tue Mar 17 17:08:17 EDT 2015 Committee Statement: Response Message: The solvent manufacturer should provide information on the flashpoint based on the use of the solvent in the drycleaning operation. If flashpoints are expected to change with continued recirculation and reuse of solvent, the manufacturer should provide that information to the user. 4 of 66 5/18/2015 1:01 PM
5 of 66 5/18/2015 1:01 PM Second Revision No. 5-NFPA 32-2015 [ Section No. 6.5.5 ] 6.5.5 The solvent manufacturer or supplier shall be responsible for providing the user facility operator with specific written instructions for the proper use and safe handling of the product in the workplace and for updating the instructions in a timely fashion as necessary. Submittal Date: Tue Mar 10 15:29:07 EDT 2015 Committee Statement: The committee agreed that suppliers in some cases are the ones who will provide instructions. Instructions should be provided to the facility operator to ensure that the facility operator is held accountable to ensure that instructions are followed and that equipment and solvent are compatible. Response Message: Public Comment No. 6-NFPA 32-2014 [Section No. 6.5.5]
6 of 66 5/18/2015 1:01 PM Second Revision No. 37-NFPA 32-2015 [ Chapter 7 [Title Only] ] Type II Drycleaning Facility Facilities Submittal Date: Tue Mar 17 17:22:53 EDT 2015 : Applies to multiple facilities.
Second Revision No. 38-NFPA 32-2015 [ Section No. 7.2 ] 7.2 Location and Construction of Facility Facilities. 7.2.1* Separation. Type II facilities located in buildings with other occupancies shall be separated vertically and horizontally from other occupancies in accordance with Section 7.2. 7.2.1.1 Facilities employing both Version II and Version III equipment shall comply with the provisions for Version II equipment, except where the equipment of each version is separated by the use of a drycleaning room in accordance with 7.2.6. 7.2.2 Facilities Using Version II Equipment Requiring Four-Hour Construction. 7.2.2.1 Facilities employing Version II equipment shall be separated from assembly, educational, day care, health care, detention, ambulatory health care, correctional, and residential occupancies by a fire barrier having a minimum fire resistance rating of 4 hours. Openings shall have a 3-hour fire rated assembly with self-closing or automatic-closing opening protection having a minimum 3-hour fire protection rating, devices except as permitted in 7.2.2.2. 7.2.2.2 In facilities where the quantity of Class II solvents in Version II equipment and storage does not exceed 568 L (150 gal), the required fire barrier shall be permitted to have a 2-hour fire resistance rating, with self-closing or automatic-closing opening protection having a 1 1 2-hour fire protection rating providing the equipment incorporates an integral automatic fire-extinguishing system, is intrinsically safe, and is in a drycleaning room in accordance with 7.2.6. Openings shall have a 1 1 2-hour fire rated assembly with self-closing or automatic-closing devices. 7.2.3 Facilities Using Version II Equipment Requiring Two-Hour Construction. 7.2.3.1 Facilities employing Version II equipment shall be separated from business, factory/industrial, mercantile, and storage-type businesses, and other similar occupancies by a fire barrier having a minimum fire resistance rating of 2 hours. Openings shall have a 1 1 2-hour fire rated assembly with self-closing or automatic-closing devices opening protection having a minimum 1 1 2-hour fire protection rating, except as permitted in 7.2.3.2. 7.2.3.2 In facilities where the quantity of Class II solvents in Version II equipment and storage does not exceed 568L 568 L (150 gal), the required fire barrier shall be permitted to have a 1-hour fire resistance rating with self-closing or automatic-closing opening protection having a 3 4-hour fire protection rating, providing the equipment incorporates an integral automatic fire-extinguishing system, is intrinsically safe, and is in a drycleaning room in accordance with 7.2.6. Openings shall have a 1 3 4 hour fire rated assembly with self-closing or automatic-closing devices. 7.2.4 Facilities with Version III Equipment Requiring Four-Hour Construction. 7.2.4.1 Facilities employing Version III equipment shall be separated from assembly, educational, day care, health care, detention, ambulatory health care, correctional, and residential occupancies by a fire barrier having a minimum fire resistance rating of 4 hours. Openings shall have a 3-hour fire rated assembly with self-closing or automatic-closing opening protection having a minimum 3-hour fire protection rating, devices except as permitted in 7.2.4.2. 7 of 66 5/18/2015 1:01 PM
7.2.4.2 In facilities where the quantity of Class II solvents in Version III equipment and storage does not exceed 568 L (150 gal), the required fire barrier shall be permitted to have a 1-hour fire resistance rating with self-closing or automatic-closing opening protection rating with openings having a 3 4-hour fire protection rating, rated assembly with self-closing or automatic-closing devices providing the equipment incorporates an integral automatic fire-extinguishing system, and includes instrumentation, equipment, or controls that provide any one of the following: (1) Features that limit oxygen concentrations to less than 8 percent by volume (2) Features that limit solvent vapor concentration to less than 25 percent of the LEL (3)* Features that limit solvent vapor concentration at or below 60 percent of the LEL, where automatic instrumentation with safety interlocks is provided in accordance with NFPA 69 7.2.5 Facilities with Version III Equipment Requiring Two-Hour Construction. 7.2.5.1 Facilities employing Version III equipment, shall be separated from business, factory/industrial, mercantile, and storage-type businesses and other similar occupancies by a fire barrier having a minimum fire resistance rating of 2 hours. Openings shall have a 1 1 2-hour fire rated assembly with self-closing or automatic-closing with self-closing or automatic-closing opening protection having a minimum 1 1 2-hour fire protection rating devices except as permitted in 7.2.5.2. 7.2.5.2 In facilities where the quantity of Class II solvents in Version III equipment and storage does not exceed 568 L (150 gal), the required fire barrier shall be permitted to have a 1-hour fire resistance rating with self- openings having a 3 4-hour fire rated assembly with self - closing or automatic-closing opening protection having a 3 4-hour fire protection rating closing devices, providing the equipment incorporates an integral automatic fire-extinguishing system, and includes instrumentation, equipment, or controls that provide any one of the following: (1) Features that limit oxygen concentrations to less than 8 percent by volume (2) Features that limit solvent vapor concentration to less than 25 percent of the LEL (3)* Features that limit solvent vapor concentration at or below 60 percent of the LEL, where automatic instrumentation with safety interlocks is provided in accordance with NFPA 69 7.2.6 Drycleaning Room. 7.2.6.1 Where the quantity of solvent in equipment and storage exceeds 568 L (150 gal), the room where the equipment is used shall be separated from the rest of the facility by a fire barrier having a fire resistance rating of not less than 2 hours. Openings shall have a 1 1 2-hour fire rated assembly with self-closing or automatic-closing opening protection having a minimum of 1 1 2-hour fire protection rating devices. 7.2.6.2 Doors to drycleaning rooms shall remain closed during normal operations. 7.2.6.3 A facility that constructs a drycleaning room in accordance with 7.2.2 to contain the equipment shall not be required to comply with 7.3.2 for locations outside the drycleaning room. Submittal Date: Tue Mar 17 17:25:49 EDT 2015 8 of 66 5/18/2015 1:01 PM
9 of 66 5/18/2015 1:01 PM Committee Statement: The committee cleaned up language for fire ratings of materials of construction to be consistent with other NFPA codes. The committee added a requirement for doors to drycleaning rooms to remain closed during normal operations. This allows areas outside all drycleaning rooms to be unclassified. Response Message: Public Comment No. 7-NFPA 32-2014 [Section No. 7.2.6.2]
Second Revision No. 39-NFPA 32-2015 [ Section No. 7.4.1 ] 7.4.1 Facilities shall be protected throughout by an approved automatic sprinkler system in accordance with 4.6.2 4.6.2 4.6.4 except as permitted in 7.4.1.1. 7.4.1.1 Automatic sprinklers shall not be required in facilities where the quantity of Class II solvents for facilities using Version III equipment, and storage does not exceed 568 L (150 gal), providing the equipment incorporates an integral automatic fire-extinguishing system, and includes instrumentation, equipment, or controls that provide one of the following: (1) Features that limit oxygen concentrations to less than 8 percent by volume (2) Features that limit solvent vapor concentration to less than 25 percent of the LEL (3)* Features that limit solvent vapor concentration at or below 60 percent of the LEL, where automatic instrumentation with safety interlocks is provided in accordance with NFPA 69 Submittal Date: Tue Mar 17 17:59:40 EDT 2015 : Provides correct cross reference. 0 of 66 5/18/2015 1:01 PM
1 of 66 5/18/2015 1:01 PM Second Revision No. 59-NFPA 32-2015 [ Section No. 8.2.3 ] 8.2.3 The required fire barrier shall be permitted to be a 1-hour resistance rating with self-closing or automaticclosing opening protection having a 3 4-hour fire protection rating in facilities where the quantity of Class III solvent in equipment and storage does not exceed 1250 L (330 gal) and equipment is provided with instrumentation, equipment systems, or controls that provide any one of the following features in 8.5.2.1 : Features that limit oxygen concentrations to less than 8 percent by volume Features that limit solvent vapor concentrations to less than 25 percent of the LEL * Features that limit solvent vapor concentration at or below 60 percent of the LEL where automatic instrumentation with safety interlocks is provided in accordance with NFPA 69 Features that incorporate intrinsically safe equipment approved for use in Class I Division 2 hazardous locations and an integral automatic fire-extinguishing system conforming with 4.6.2 Organization: National Fire Protection Assoc Submittal Date: Wed Apr 01 16:36:19 EDT 2015 Committee Statement: Response Message: The features are deleted from this section, instead pointing to the proper place in the chapter where the separation can be relaxed if machines have particular safety features. Since the location is already a Class I Division 2 then the requirement in #4 is redundant.
2 of 66 5/18/2015 1:01 PM Second Revision No. 60-NFPA 32-2015 [ Section No. 8.3.1 ] 8.3.1 Electrical Installations. Electrical equipment and wiring in Type III facilities shall be in accordance with NFPA 70Class I Division 2, except as permitted in 8.5.2.3.2. for ordinary locations. Organization: National Fire Protection Assoc Submittal Date: Wed Apr 01 16:38:53 EDT 2015 Committee Statement: Response Message: The default requirement for this chapter is Class I Division 2. If safety features are installed per 8.5.2.3.2 then the electrical requirements can be relaxed.
3 of 66 5/18/2015 1:01 PM Second Revision No. 61-NFPA 32-2015 [ Section No. 8.4.2 ] 8.4.2 Automatic sprinkler systems shall not be required in facilities where the quantity of Class III solvent in equipment and storage does not exceed 1250 L (330 gal) and if equipment is equippedwith has instrumentation, equipment systems, or controls that provide one of the following: features in 8.5.2.1.1.. Features that limit oxygen concentrations to less than 8 percent by volume Features that limit solvent vapor concentration to less than 25 percent of the LEL * Features that limit solvent vapor concentration at or below 60 percent of the LEL where automatic instrumentation with safety interlocks is provided in accordance with NFPA 69 Features that incorporate equipment approved for use in Class I Division 2 hazardous locations and integral automatic fire-extinguishing system conforming with 4.6.2 Organization: National Fire Protection Assoc Submittal Date: Wed Apr 01 16:41:57 EDT 2015 : Default is automatic sprinklers unless safety features installed per 8.5.2.1.1.
4 of 66 5/18/2015 1:01 PM Second Revision No. 66-NFPA 32-2015 [ Section No. 8.5.2.1 [Excluding any Sub-Sections] ] Equipment with drying capabilities, reclaiming dryers, or washers with solvent heating capabilities shall be equipped with all of the following except as permitted in 8.5.2.1.1: (1) Automatic extinguishing systems installed and maintained in accordance with 4.6.2 4.6.3, (2) Self-closing explosion hatch area equal to at least 0.22 m 2 /m 3 (1 ft 2 /15 ft 3 ) of cylinder volume (3) Hatches that open away from the operator Organization: National Fire Protection Assoc Submittal Date: Wed Apr 01 17:29:41 EDT 2015 : Provides correct cross reference in revised standard.
5 of 66 5/18/2015 1:01 PM Second Revision No. 67-NFPA 32-2015 [ Section No. 8.5.2.1.1 ] 8.5.2.1.1 Automatic extinguishing systems and self-closing hatches shall not be required if the equipment has integrated instrumentation, equipment systems, or controls that independently provide any one of the following: (1) Features that limit oxygen concentrations to less than 8 percent by volume (2) Features that limit solvent vapor concentrations to less than 25 percent of the LEL (3)* Features that limit solvent vapor concentration at or below 60 percent of the LEL where automatic instrumentation with safety interlocks is provided in accordance with NFPA 69 Organization: National Fire Protection Assoc Submittal Date: Thu Apr 02 10:57:26 EDT 2015 : The term systems replaces the term equipment for consistency in the document.
6 of 66 5/18/2015 1:01 PM Second Revision No. 65-NFPA 32-2015 [ Section No. 8.5.2.2.3 ] 8.5.2.2.3 If a relief valve is provided, it shall be equipped with a vent line extending to the outside of the building. Organization: National Fire Protection Assoc Submittal Date: Wed Apr 01 17:28:23 EDT 2015 : Change clarifies that not outside the machine but outside the building.
7 of 66 5/18/2015 1:01 PM Second Revision No. 62-NFPA 32-2015 [ Section No. 8.5.2.3.1 ] 8.5.2.3.1* For equipment in which solvent is ordinarily For equipment in which solvent is heated heated above ambient temperatures in washing or drying to a temperature that allows the solvent vapor concentration to equal or exceed 25 percent of the LEL, the electrical equipment and wiring shall be designed to greater than 16.7 C (30 F) below the flash point, in the drying phase the electrical components and wiring on such equipment shall be in accordance with NFPA 70 Class I Division 2, except as permitted in 8.5.2.3.2. Supplemental Information File Name A8.5.2.3.1.docx Description Organization: National Fire Protection Assoc Submittal Date: Wed Apr 01 16:44:56 EDT 2015 Committee Statement: Response Message: The committee recognized that there is no data showing that maintaining temperatures less than 30 degrees below the flashpoint keeps LEL concentrations to less than 25%. The more critical issue is the LEL therefore the requirements for electrical equipment are tied into the temperature at which the solvent reaches 25% LEL concentration rather than to the 30 degrees below the flashpoint. Annex material has been added to explain the requirement.
A.8.5.2.3.1 Each solvent has a temperature at which vapor concentrations are produced that reach 25% of the LEL for that solvent. Either the solvent manufacturer should provide the equipment manufacturer with the temperatures that causes that solvent to reach 25% of the LEL or the equipment manufacturer should test the solvent to determine this temperature. The equipment that is approved for the solvent would have the ability to control the heating of the solvent to a level below 25% of the LEL based on the solvent that is approved for use in the machine. Equipment does not necessarily require an LEL measuring device.
8 of 66 5/18/2015 1:01 PM Second Revision No. 63-NFPA 32-2015 [ Sections 8.5.2.3.2, 8.5.2.3.3 ] 8.5.2.3.2 The electrical equipment and wiring on equipment without stills shall be in accordance with NFPA 70, and contain as long as it contains instrumentation, equipment systems, or controls that are active in washing or drying that provide any one or combination of the following: (1) Features that limit oxygen concentrations to less than 8 percent by volume (2) Features that limit solvent vapor concentration to less than 25 percent of the LEL (3)* Features that limit solvent vapor concentration at or below 60 percent of the LEL where automatic instrumentation with safety interlocks is provided in accordance with NFPA 69 8.5.2.3.3 The electrical equipment and wiring on equipment with stills shall be in accordance with NFPA 70, and contain instrumentation, equipment, or controls that can automatically de-energize equipment if the Visual and audible alarm devices and automatic shutdown of non-safety related components shall be provided to de-energize equipment if its integrity of the still has been compromised and is not functioning as designed. Organization: National Fire Protection Assoc Submittal Date: Wed Apr 01 17:01:22 EDT 2015 Committee Statement: Response Message: These changes were made to clarify that safety features are working during the correct portion of a drycleaning cycle.
9 of 66 5/18/2015 1:01 PM Second Revision No. 64-NFPA 32-2015 [ Sections 8.5.2.3.4, 8.5.2.3.5 ] 8.5.2.3.4 For equipment in which solvent is ordinarily heated at or greater than 16.7 C (30 F) below the flash point, in the washing phase the electrical components and wiring on such equipment shall be in accordance with NFPA 70, Class I Division 2, except as permitted in 8.5.2.3.5. 8.5.2.3.5 Equipment in which solvent is heated at or greater than 16.7 C (30 F) below the flash point in the washing, draining, and extraction phases, and has instrumentation, equipment, or controls active during such time that provide any one of the following shall be in accordance with NFPA 70 for ordinary locations: Features that limit oxygen concentrations to less than 8 percent by volume Features that limit solvent vapor concentration to less than 25 percent of the LEL Features that limit solvent vapor concentration at or below 60 percent of the LEL where automatic instrumentation with safety interlocks is provided in accordance with NFPA 69 Organization: National Fire Protection Assoc Submittal Date: Wed Apr 01 17:24:56 EDT 2015 : These requirements have been consolidated and included in 8.5.2.3.1.
0 of 66 5/18/2015 1:01 PM Second Revision No. 40-NFPA 32-2015 [ Section No. 9.1.1 ] 9.1.1 This chapter shall apply to drycleaning facilities or systems utilizing Class IV solvents. Submittal Date: Thu Mar 19 16:04:53 EDT 2015 : Editorial. No 9.1.1 needed since no 9.1.2.
1 of 66 5/18/2015 1:01 PM Second Revision No. 41-NFPA 32-2015 [ Section No. 9.2.1 ] 9.2.1 Electrical. All electrical equipment, devices, and wiring for light and power shall be installed in accordance with the requirements of NFPA 70 for ordinary locations. Submittal Date: Thu Mar 19 16:05:46 EDT 2015 : Editorial. No 9.2.2 so 9.2.1 not needed.
2 of 66 5/18/2015 1:01 PM Second Revision No. 42-NFPA 32-2015 [ Section No. 9.3.3.2 ] 9.3.3.2 Atmospheric solvent stills shall be constructed to prevent hot solvent vapor from escaping into the facility where operated under normal conditions and at rated capacity. Submittal Date: Thu Mar 19 16:06:40 EDT 2015 Committee Statement: Response Message: Extra wording did not add any information to the text. Stills would always be operated at normal conditions and capacity.
3 of 66 5/18/2015 1:01 PM Second Revision No. 43-NFPA 32-2015 [ Section No. 9.3.4.2.1.1 ] 9.3.4.2.1.1* A Where carbon dioxide storage tanks are installed inside buildings, a listed gas detection system with an audible local alarm shall be installed in indoor storage areas and used to notify the building occupants if the a leak of carbon dioxide concentration reaches an unsafe level occurs. Supplemental Information File Name A.9.3.4.2.1.1.docx Description Submittal Date: Thu Mar 19 16:08:32 EDT 2015 Committee Statement: Response Message: It is difficult to determine what an "unsafe level" of CO2 would be and this language is vague and unenforceable. The concern is with any leak of CO2. Annex material was added to further explain where gas detectors should be installed.
A.9.3.4.2.1 Consideration shall be given to the possibility of carbon dioxide drifting and settling into adjacent places outside of where the carbon dioxide is used. A detection system should also be installed in that location.
4 of 66 5/18/2015 1:01 PM Second Revision No. 44-NFPA 32-2015 [ Section No. 9.3.4.2.1.3 ] 9.3.4.2.1.3 Consideration shall be given to the possibility of carbon dioxide drifting and settling into adjacent places outside of where the carbon dioxide is used, and a detection system shall be installed in that location. Submittal Date: Thu Mar 19 16:13:07 EDT 2015 : This information was moved to annex for 9.3.4.2.1.1
5 of 66 5/18/2015 1:01 PM Second Revision No. 45-NFPA 32-2015 [ Section No. 9.3.4.2.1.4 ] 9.3.4.2.1.3 Intentional or unintentional venting Venting from the equipment shall be released to the outdoors in a location a safe distance away from any air intake to prevent re- entrainment. Submittal Date: Thu Mar 19 16:14:07 EDT 2015 : Reworded to clarify the requirement is to vent outdoors away from air intakes.
6 of 66 5/18/2015 1:01 PM Second Revision No. 46-NFPA 32-2015 [ Section No. 9.3.4.2.1.6 ] 9.3.4.2.1.5 Maintenance on the equipment shall be performed by qualified trained personnel in accordance with manufacturers recommendations. Submittal Date: Thu Mar 19 16:16:00 EDT 2015 : All maintenance should be in accordance with mfrs recommendations.
7 of 66 5/18/2015 1:01 PM Second Revision No. 47-NFPA 32-2015 [ Chapter 10 [Title Only] ] Laundry and Wetcleaning Equipment in Drycleaning Facilities Submittal Date: Thu Mar 19 16:17:50 EDT 2015 : Chapter also applies to wetcleaning when in drycleaning facilities.
8 of 66 5/18/2015 1:01 PM Second Revision No. 48-NFPA 32-2015 [ Section No. 10.3.1 ] 10.3.1 Location. Equipment shall be located in facilities with an intake and outlet exhaust air exchange equal to or exceeding the air exchange required for the equipment. Submittal Date: Thu Mar 19 16:18:39 EDT 2015 : Exhaust is the proper term., not outlet.
9 of 66 5/18/2015 1:01 PM Second Revision No. 49-NFPA 32-2015 [ Section No. 10.3.2 ] 10.3.2 Laundry Dryer Temperature Control. Laundry dryers, as used in drycleaning facilities, shall be equipped with safety controls to ensure proper temperature and cool-down of textiles prior to the equipment being unloaded. The textiles shall be cooled down in such a way that the risk of spontaneous combustion is safely eliminated. Submittal Date: Thu Mar 19 16:19:17 EDT 2015 Committee Statement: Clarified that this section applied to laundry dryers. Removed vague unenforceable language.
0 of 66 5/18/2015 1:01 PM Second Revision No. 50-NFPA 32-2015 [ Section No. A.7.1 ] A.7.1 Version I equipment for Type II facilities is prohibited per 4.2.3. Submittal Date: Thu Mar 19 16:27:06 EDT 2015 : Changed to proper references.
1 of 66 5/18/2015 1:01 PM Second Revision No. 51-NFPA 32-2015 [ Section No. A.9.3.4.2.1.8 ] A.9.3.4.2.1.7 See NFPA 12 NFPA 704 for guidance on labeling for emergency response. See NFPA 12 for additional information on signage for carbon dioxide systems. Some examples of signage are as follows: Typical sign where carbon dioxide is stored or used: WARNING CARBON DIOXIDE GAS WHEN ALARM OPERATES, VACATE IMMEDIATELY. Typical sign in nearby space where carbon dioxide can accumulate to hazardous levels: CAUTION CARBON DIOXIDE IN A NEARBY SPACE CAN COLLECT HERE. WHEN ALARM OPERATES, VACATE IMMEDIATELY. Typical sign outside each entrance to carbon dioxide storage rooms: CAUTION CARBON DIOXIDE GAS VENTILATE THE AREA BEFORE ENTERING. A HIGH CARBON DIOXIDE GAS CONCENTRATION CAN OCCUR IN THIS AREA AND CAN CAUSE SUFFOCATION. Submittal Date: Thu Mar 19 16:28:28 EDT 2015 Committee Statement: reference to NFPA 704 added. Removed examples and instead referred to NFPA 12 for additional information.
2 of 66 5/18/2015 1:01 PM Second Revision No. 56-NFPA 32-2015 [ Section No. B.1 ] B.1 Figure B.1 shows a flowchart for determining the requirements in NFPA 32 based on the type of facility and the version of equipment in use. Figure B.1 NFPA 32 Document Requirements Flowchart. Supplemental Information File Name FINALAnnex_B_32.docx Description Organization: National Fire Protection Assoc Submittal Date: Thu Mar 26 16:04:12 EDT 2015 : Updated figure.
Determine Type of Facility based on Lowest Class of Solvent Used in Drycleaning operation 2,3 Commented [PN1]: Insert Title NFPA 32 2016 Document Flowchart Type I Facility Prohibited 1 Type II Facility Chapter 7 Type III Facility Chapter 8 Type IV Facility Chapter 9 Determine Version of Equipment Determine Version of Equipment Determine Version of Equipment Version II Version III Version II Version III Version II Version III Version IV Facility Types- Facility type is defined based on the lowest numerical class of solvent used in the equipment. Type I Facility. Facilities employing class I solvents. Type II Facility. Facilities employing class II solvents. Type III Facility. Facilities employing class IIIA and IIIB solvents. Type IV Facility. Facilities employing class IV solvents. Equipment Versions Version I Equipment. Flowchart for determining the requirements in NFPA 32 based on Type of An open system employing either combustible or noncombustible liquid that is continuously open to the atmosphere facility and version of equipment in use. Version II Equipment. An open-circuit system employing combustible or noncombustible liquid, that releases fugitive emissions, suppresses and controls combustion, and that has safety controls. Version III Equipment. A closed-loop system employing combustible or noncombustible liquid that does not release emissions, prevents combustion, and that has safety controls. Version IV Equipment. A closed-loop system for noncombustible liquids that has safety controls and that does not release emissions. 1. Type I Facilities are prohibited per 4.3.2 2. Drycleaning operations that also have laundry or wetcleaning operations should also refer to Chapter 10. 3. The requirements of Chapters 4 6 apply to all facilities.
3 of 66 5/18/2015 1:01 PM Second Revision No. 52-NFPA 32-2015 [ Section No. C.1.1 ] D.1.1 NFPA Publications. National Fire Protection Association, 1 Batterymarch Park, Quincy, MA 02169-7471. NFPA 12, Standard on Carbon Dioxide Extinguishing Systems, 2015 edition. NFPA 30, Flammable and Combustible Liquids Code, 2015 edition. NFPA 58, Liquefied Petroleum Gas Code, 2014 edition. NFPA 77, Recommended Practice on Static Electricity, 2014 edition. NFPA 704, Standard System for the Identification of the Hazards of Materials for Emergency Response, 2012 edition. Fire Protection Guide to Hazardous Materials, 14th edition, 2010. Submittal Date: Thu Mar 19 16:30:21 EDT 2015 : reference added in 9.3.4.2.1.8.
4 of 66 5/18/2015 1:01 PM Second Revision No. 54-NFPA 32-2015 [ Section No. C.1.2.1 ] D.1.2.1 ASTM Publications. ASTM International, 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428-2959. ASTM D56, Test Standard Test Method for Flash Point by Tag Closed Cup Tester,2005 2010. ASTM D93, Standard Test Methods for Flash Point by Pensky Martens Closed Cup Tester,2013. 2015 Submittal Date: Fri Mar 20 11:19:13 EDT 2015 : Updated to current editions and titles.
5 of 66 5/18/2015 1:01 PM Second Revision No. 53-NFPA 32-2015 [ Section No. C.1.2.2 ] D.1.2.2 U.S. Government Publications. U.S. Government Printing Office, Washington, DC 20402. Title 29, Code of Federal Regulations, Part 1910.38, Employee Emergency Plans and Fire Prevention Plans, 1998 Plans. Title 29, Code of Federal Regulations, Part 1910.156, Fire Brigades, 1998 Brigades. Title 29, Code of Federal Regulations, Part 1910.1200, Hazard Communication, 1998 Communication. Submittal Date: Fri Mar 20 11:12:12 EDT 2015 Committee Statement: Response Message: The CFRs are published each date but the date does not necessarily reflect a change in the regulation. Date is meaningless.
Second Revision No. 57-NFPA 32-2015 [ New Section after C.3 ] Annex C Solvent Characteristics C.1 Typical Drycleaning Solvent Characteristics Figure C.1 is not comprehensive. It is provided only as a reference for AHJs to assist in the application of requirements in NFPA 32. SDSs should be consulted prior to such application of the requirements of this standard. Figure C.1 Typical Drycleaning Solvent Characteristics. Supplemental Information File Name FINAL_ANNEX_C_SOLVENT_CHARATERISTICS.xlsx Description Organization: National Fire Protection Assoc Submittal Date: Fri Mar 27 11:03:28 EDT 2015 Committee Statement: Response Message: A new annex C has been added to provide AHJs with information on the range of solvents and solvent properties typically found in drycleaning. 6 of 66 5/18/2015 1:01 PM