3 Speed, 40cm R2000B 12 months
Important Safeguards When using electrical appliances, in order to reduce the risk of fire, electric shock, and/or injury, these basic safety precautions should always be followed: FOR YOUR SAFETY Read all instructions carefully, even if you are familiar with the appliance. The appliance is not intended for use by children or infirm persons without supervision. Children should be prevented from playing with the appliance. Switch off the power outlet and remove the plug when the appliance is not in use. Do not operate any appliance with a damaged cord or plug; if the appliance malfunctions; or if it is dropped or damaged in any manner. Do not use outdoors. Do not use any appliance for anything other than its intended use. This product is intended for household use only. This appliance is intended to be plugged in a 240v power outlet only. Do not misuse the cord. Never carry the appliance by the cord or pull to disconnect it from the outlet. Instead, grasp the plug and pull to disconnect. Do not attempt to repair, disassemble or modify the appliance. There are no userserviceable parts. Arrange the power cord away from traffic areas where it will not be tripped over. Do not insert or allow foreign objects to enter the grille openings as this may cause damage to the appliance and/or injury to the user. COMPULSORY WARNING If the supply cord is damaged, it must be replaced by the manufacturer or its service agent, or a similarly qualified person, in order to avoid a hazard. This product has not been designed for any uses other than those specified in this booklet. SAVE THESE INSTRUCTIONS 2
Features of your Childproof Safety Grille Blade Assembly (inside) Tilt Adjustable Airfl ow Angles 3-Speed Push Button Control Height Adjustable Topple Resistant / Non-Scratch Base 3
Getting to know your Congratulations on the purchase of your new by Ringgrip. Before first using your new, it is most important that you read and follow the instructions in this use and care booklet, even if you feel you are familiar with this type of appliance. Your attention is drawn particularly to the section dealing with IMPORTANT SAFEGUARDS. Find a safe and convenient place to keep this booklet handy for future reference. This appliance has been designed to operate from a standard domestic power outlet. It is not intended for industrial or commercial use. Your is safe and easy to use. It has been designed to function quietly and safely under normal circumstances. Your is fully portable with a sturdy stand and contemporary design. Its energy efficient blades circulate cool air while using less power than a standard light globe. The heavy-duty motor is rated for continuous use to combat long hot summers. Use the manual clutch to choose fixed direction for personal comfort or oscillating to cover larger areas. Assembly of your Your has been boxed unassembled to minimise packaging waste. Each part is designed to fit together and be disassembled easily for cleaning or storage. To assemble the safety grille and blade assembly, remove the spinner (by turning it clockwise), then the locking nut (by turning it anticlockwise) from the motor spindle. Place the back safety grille into position. Ensure the safety grille fits onto the locating lugs (Fig. 1). If this is done correctly, the safety grille s carry handle will be at the top. (Fig. 1 - Locating lugs and locking nut) Fix the safety grille into position by replacing the locking nut tightly by hand (Fig. 1). Do not force the locking nut. The groove in the centre of the fan blade aligns with a T-bar on the motor spindle to ensure correct positioning. Fix the blade into place by gently hand tightening the spinner (Fig. 2) anticlockwise onto the end of the motor spindle. The spinner is self-tightening; do not force it. (Fig. 2 Spinner tightens anti-clockwise) 4
Lift out all locking clips on the front safety grille (Fig. 3) Loosen the height adjustment ring and extend the support pole. Initially the support pole will be held tightly in place. If necessary, use a pair of pliers to grasp the support pole and pull it into position. Retighten the height adjustment ring to prevent slipping, then place the fan assembly onto the pole and tighten the pole screw manually (Fig. 6). (Fig. 3) Place the safety grille into position and secure it by fastening the clips over the outer rim (Fig. 4). (Fig. 6) (Fig. 4) Assemble the base to the support pole using the fasteners provided. (Fig. 5) 5
Operation of your Remove the cable tie and unravel the cordset before operation. The fan and motor assembly are attached to a 4- position ratchet. Tilt up or down until the assembly clicks into the desired position. Press button 1 for a low speed, 2 for a medium speed and 3 for a high speed. Press 0 to switch the off. To blow air in one direction and stop oscillation, allow the to move into the desired position and pull the clutch knob up. Press the clutch knob down to return to a normal oscillating function (Fig. 7). Care and Cleaning Always disconnect electrical appliances before cleaning them. To clean the blade and grille assembly, first remove the safety grille, unscrew the locknut and remove the blade from the. Wipe them clean with a slightly damp sponge. Clean the motor housing and body assembly with a clean, damp cloth and wipe dry. Never spray the with liquids or submerge it in water or any other liquid. Note: If the cordset of this appliance becomes damaged, discontinue use. Repairs should be undertaken only by a qualified technician. (Fig. 7 Clutch) Clutch Specifications R2000B 3 Speed, 40cm. For indoor use only. 230-240V a.c., 50Hz, 50 Watt 6
Notes 7
Warranty The benefits conferred by this warranty are in addition to all implied warranties, other rights and remedies in respect of the product which the consumer has under the Trade Practices Act and similar State and Territory Laws. The original purchaser of this Ringgrip product is provided with the following warranty subject to the following conditions. Linda Australia Pty Ltd warrant this product for a period of 12 months from the date of purchase for all parts defective in workmanship or materials. This product or defective parts will be replaced free of charge. WARRANTY CONDITIONS 1. This warranty is only valid for appliances used according to the manufacturer s instructions 2. This appliance must not be modified or changed in any way. 3. Connection must be to the voltage requirements as specified in the ratings label located on the product. 4. The manufacturer does not accept liability for any direct or consequential damage, loss or other expense arising from misuse or incorrect installation and operation of the appliance. 5. Warranty will only be given where proof of purchase is provided, e.g. original invoice. 6. Not designed or warranted for industrial or commercial use. DO NOT SEND IN THIS WARRANTY Fill out the following details and file with your purchase invoice. RETAIN & FILE WITH YOUR RECEIPT. Your Purchase Receipt/Invoice is proof of date of purchase. You must be able to present it at the place of purchase to obtain a replacement or service under warranty. Linda Australia Pty Ltd reserves the right to discontinue items, modify designs and change specifications without incurring obligation. Whilst every effort is made to ensure that descriptions, specifications and other information in this publication is correct, no warranty is given in respect thereof and the company shall not be liable for any errors therein. Purchased from: Co. Name: Address: Date of Purchase: NOTE: Consistent with our continuing product development policy, improvements may have been made which render the contents of this package slightly different to that shown. Cat. No. R2000B June 2003 Ringgrip Click Pty Ltd ABN 67 085 677 023 324 Frankston-Dandenong Road Dandenong South, Victoria, Australia 3175 Telephone 1300 654 488 Facsimile +61 3 9212 1340 Internet Address: www.mistral.com.au RINGGRIP (NZ) Pty Ltd ACN 006 771 922 PO Box 51317, Pakuranga, Auckland NZ Telephone 0800 328 280 Facsimile 0800 328 238 Mistral is a registered trademark of Mistral International Pty Ltd 2001 Linda Australia Pty Ltd 8