PUBLISHED WEEKLY BY THE AMERICAN NATIONAL STANDARDS INSTITUTE 25 West 43rd Street, NY, NY 10036 VOL. 40, #48 November 27, 2009 Contents American National Standards Call for Comment on Standards Proposals... 2 Call for Comment Contact Information... 8 Call for Members (ANS Consensus Bodies)... 10 Final Actions... 12 Project Initiation Notification System (PINS)... 13 International Standards ISO Draft Standards... 18 Proposed Foreign Government Regulations... 19 Information Concerning... 20 American National Standards Call for comment on proposals listed This section solicits public comments on proposed draft new American National Standards, including the national adoption of ISO and IEC standards as American National Standards, and on proposals to revise, reaffirm or withdraw approval of existing American National Standards. A draft standard is listed in this section under the ANSI-accredited standards developer (ASD) that sponsors it and from whom a copy may be obtained. Comments in connection with a draft American National Standard must be submitted in writing to the ASD no later than the last day of the comment period specified herein. Such comments shall be specific to the section(s) of the standard under review and include sufficient detail so as to enable the reader to understand the commenter's position, concerns and suggested alternative language, if appropriate. Please note that the ANSI Executive Standards Council (ExSC) has determined that an ASD has the right to require that interested parties submit public review comments electronically, in accordance with the developer s procedures. Ordering Instructions for "Call-for-Comment" Listings 1. Order from the organization indicated for the specific proposal. 2. Use the full identification in your order, including the BSR prefix; for example, Electric Fuses BSR/SAE J554. 3. Include remittance with all orders. 4. BSR proposals will not be available after the deadline of call for comment. Comments should be addressed to the organization indicated, with a copy to the Board of Standards Review, American National Standards Institute, 25 West 43rd Street, New York, NY 10036. Fax: 212-840-2298; e-mail: psa@ansi.org 2009 by American National Standard Institute, Inc. ISSN 0038-9633 ANSI members may reproduce for internal distribution. Journals may excerpt items in their fields
Standards Action - November 27, 2009 - Page 2 of 23 Pages Comment Deadline: December 27, 2009 UL (Underwriters Laboratories, Inc.) BSR/UL 1030-201x, Standard for Safety for Sheathed Type Heating Elements (revision of ANSI/UL 1030-2009) Withdrawal of UL 1030 Proposal: Revises Table 15.1 to include Maximum Current. Click here to see these changes in full, or look at the end of Standards Action. Send comments (with copy to BSR) to: Valara Davis, (919) 549-0921, Valara.Davis@us.ul.com Comment Deadline: January 11, 2010 AMCA (Air Movement and Control Association) BSR/AMCA 99-201x, Standards Handbook (revision and consolidation of ANSI/AMCA 99-0068-2003, 99-2404-2003, 99-2405-2003, 99-2406-2003, 99-2407-2003, 99-2410-2003, 99-2412-2003, 99-2413-2003, 99-2414-2003, 99-3001-2003, and 99-3404-2003) Provides a collection of standardized terminology and definitions for the air movement and air control industry. Topics include the Fan Laws, vocabulary and definitions, conversions between SI and I-P units, drive arrangements, fan classes, spark-resistant construction, and general fan construction. Single copy price: $5.00 Obtain an electronic copy from: jpakan@amca.org Order from: John Pakan, (847) 394-0150, jpakan@amca.org ASABE (American Society of Agricultural and Biological Engineers) Reaffirmations BSR/ASAE EP389.2-JAN94 (R201x), Auger Flighting Design Considerations (reaffirmation of ANSI/ASAE EP389.2-JAN94 (R2005)) Provides a guide for designing conveyor augers using steel helicoid flighting and for specifying helicoid flighting as generally used in agricultural equipment. Single copy price: $48.00 Obtain an electronic copy from: vangilder@asabe.org Order from: Carla VanGilder, (269) 932-7015, vangilder@asabe.org BSR/ASAE S323.2-MAY89 (R201x), Definitions of Powered Lawn & Garden Equipment (reaffirmation of ANSI/ASAE S323.2-MAY89 (R2005)) Classifies and defines various types of machines and terms so that these definitions may be used in future ASABE Standards and to aid in clear-cut communication. Single copy price: $48.00 Obtain an electronic copy from: vangilder@asabe.org Order from: Carla VanGilder, (269) 932-7015, vangilder@asabe.org BSR/ASAE S362.2-APR88 (R201x), Wiring and Equipment for Electrically Driven or Controlled Machines (reaffirmation of ANSI/ASAE S362.2-APR88 (R2005)) Provides detailed information for the application of electrical apparatus to electrically driven or controlled irrigation machines. The purpose of this Standard is to improve the degree of personal safety in operation and application of products and materials under a reasonable range of conditions. Single copy price: $48.00 Obtain an electronic copy from: vangilder@asabe.org Order from: Carla VanGilder, (269) 932-7015, vangilder@asabe.org BSR/ASAE S377-APR90 (R201x), Application of Remote Linear Control Devices to Lawn and Garden Ride-on Tractor Attachments and Implements (reaffirmation of ANSI/ASAE S377-APR90 (R2005)) Establishes common mounting and clearance dimensions for remote linear control devices as applied to lawn and garden ride-on tractor attachments and implements, with such other specifications as are necessary to accomplish the following objectives: (1) Permit use of any make or model of attachment or implement adapted for control by a remote linear control device; and (2) To facilitate changing the remote linear control device from one attachment or implement to another. Single copy price: $48.00 Obtain an electronic copy from: vangilder@asabe.org Order from: Carla VanGilder, (269) 932-7015, vangilder@asabe.org BSR/ASAE S522.1-JAN05 (ISO 5674-2004) (R201x), Tractors and machinery for agricultural and forest - Guards for power take-off (PTO) drive shafts - Strength and wear tests and acceptance criteria (reaffirmation of ANSI/ASAE S522.1-JAN05 (ISO 5674-2004)) Specifies laboratory tests for determining the strength and wear resistance of guards for power take-off (PTO) drive-shafts on tractors and machinery used in agriculture and forestry, and their acceptance criteria. This standard is intended to be used in combination with ASAE S207. It is applicable to the testing of PTO drive-shaft guards and their restraining means. Single copy price: $48.00 Obtain an electronic copy from: vangilder@asabe.org Order from: Carla VanGilder, (269) 932-7015, vangilder@asabe.org ATIS (Alliance for Telecommunications Industry Solutions) BSR ATIS 0300230-201x, Telecommunications Charge Card and Billed Number Screening Validation Message Components (revision of ANSI ATIS 0300230-1994 (R2004)) Applies to telecommunications charge card (aka calling card ) and billed number screening validation messages for use within the North American telecommunications interchange environment. Single copy price: $55.00 Obtain an electronic copy from: kconn@atis.org Order from: Kerrianne Conn, (202) 434-8841, kconn@atis.org
Standards Action - November 27, 2009 - Page 3 of 23 Pages Reaffirmations BSR ATIS 0300207-2000 (R201x), Operations, Administration, Maintenance, and Provisioning (OAM&P) -Terminating Test Line Access and Capabilities (reaffirmation of ANSI ATIS 0300207-2000 (R2004)) Describes types of terminating test lines and their operational functions, and provides numbering plan arrangements to access these capabilities for testing across interconnections in the public switched network. The capability outlined in this standard applies to both end-user and network providers access to existing and proposed terminating test lines from originating, intermediate, and terminating points in the network. Single copy price: $55.00 Obtain an electronic copy from: kconn@atis.org Order from: Kerrianne Conn, (202) 434-8841, kconn@atis.org BSR ATIS 0300218-1999 (R201x), ISDN Management - Data Link and Network Layers (reaffirmation of ANSI ATIS 0300218-1999 (R2004)) Provides the maintenance operations requirements for the data link and network layers associated with access to Integrated Services Digital Networks (ISDNs). This standard provides functional requirements to support maintenance and is not meant to be an equipment specification. Single copy price: $55.00 Obtain an electronic copy from: kconn@atis.org Order from: Kerrianne Conn, (202) 434-8841, kconn@atis.org BSR ATIS 0300234-2000 (R201x), Signalling System Number 7 (SS7) - MTP Levels 2 and 3 Compatibility Testing (reaffirmation of ANSI ATIS 0300234-2000 (R2004)) Addresses the testing requirements for internetwork connections employing Common Channel Signaling (CCS) based on Signaling System No. 7 (SS7) protocol used in North America. The internetwork connection will be either within or between North American countries. This standard provides a list of test scripts for testing compatibility between the interconnecting networks of the Message Transfer Part (MTP), level 2 and level 3, of the SS7 protocol. Single copy price: $250.00 Obtain an electronic copy from: kconn@atis.org Order from: Kerrianne Conn, (202) 434-8841, kconn@atis.org BSR ATIS 0300235-2000 (R201x), Signalling System 7 (SS7) - SCCP Class 0 Compatibility Testing (reaffirmation of ANSI ATIS 0300235-2000 (R2004)) Addresses the testing required for internetwork connections employing Common Channeling Signalling (CCS) based on Signalling System No. 7 (SS7) protocol used in North America. The internetwork connection will be either within or between North American countries. This standard provides a list of test scripts for testing compatibility between the interconnecting networks of the Signalling Connection Control Part (SCCP) Class 0 of the SS7 protocol. Single copy price: $100.00 Obtain an electronic copy from: kconn@atis.org Order from: Kerrianne Conn, (202) 434-8841, kconn@atis.org BSR ATIS 0300239-1994 (R201x), ISDN Management - User-Network Interfaces Protocol Profile (reaffirmation of ANSI ATIS 0300239-1994 (R2004)) Describes the protocol profile employed in providing management information transfer capabilities at the ISDN user-network interface. This standard is one of a series of standards describing the model, protocol profile, and the communications capabilities in support of management and maintenance functions to be provided at the ISDN user-network interface. Single copy price: $100.00 Obtain an electronic copy from: kconn@atis.org Order from: Kerrianne Conn, (202) 434-8841, kconn@atis.org BSR ATIS 0300241-1994 (R201x), ISDN Service-Profile Verification and Service-Profile Management ISDN Interface Management Services (reaffirmation of ANSI ATIS 0300241-1994 (R2004)) Provides requirements for the reading and writing of ISDN service profile information in an ISDN switch directly from ISDN terminal equipment. These capabilities provide for some real-time customer network management capabilities. This standard is one of a series of standards describing the model, protocol profile, and the communications capabilities in support of management and maintenance functions to be provided at the ISDN user-network interface. Single copy price: $100.00 Obtain an electronic copy from: kconn@atis.org Order from: Kerrianne Conn, (202) 434-8841, kconn@atis.org AWS (American Welding Society) BSR/AWS D1.1/D1.1M-201x, Structural Welding Code - Steel (revision of ANSI/AWS D1.1/D1.1M-2008) Covers the welding requirements for any type of welded structure made from the commonly used carbon and low-alloy constructional steels. Clauses 1 through 8 constitute a body of rules for the regulation of welding in steel construction. There are eight normative and twelve informative annexes in this code. A Commentary of the code is included with the document. Single copy price: $262.00 Obtain an electronic copy from: roneill@aws.org Order from: Rosalinda O'Neill, (305) 443-9353, roneill@aws.org Send comments (with copy to BSR) to: Andrew Davis, (305) 443-9353, Ext. 466, adavis@aws.org; roneill@aws.org BSR/AWS D17/1/D17.1M-201x, Specification for Fusion Welding for Aerospace Applications (revision of ANSI/AWS D17.1-2001) Provides the general welding requirements for welding aircraft and space hardware. This standard includes but is not limited to the fusion welding of aluminum-based, nickel-based, iron-based, cobalt-based, magnesium-based, and titanium-based alloys using electric-arc and high-energy beam processes. Single copy price: $58.00 Obtain an electronic copy from: roneill@aws.org Order from: Rosalinda O'Neill, (305) 443-9353, roneill@aws.org Send comments (with copy to BSR) to: Andrew Davis, (305) 443-9353, Ext. 466, adavis@aws.org; roneill@aws.org
Standards Action - November 27, 2009 - Page 4 of 23 Pages CEA (Consumer Electronics Association) New Standards BSR/CEA 109-D-201x, Intermediate Frequencies for Entertainment Receivers (new standard) Specifies Intermediate Frequencies (IFs) to be used in Standard Broadcast (AM), FM, and TV broadcast receivers. In CEA-109-D, the term Intermediate Frequency (IF) refers to the dominant interference-rejecting and passband-shaping circuits in receiver front-ends. Single copy price: $43.00 Order from: Global Engineering Documents, (800) 854-7179, www.global.ihs.com Send comments (with copy to BSR) to: Alayne Bell, (703) 907-5267, ABell@CE.org; Carce@CE.org Reaffirmations BSR/ISA 75.25.01-2001 (R201x), Test Procedure for Control Valve Response (reaffirmation of ANSI/ISA 75.25.01-2001) Defines the testing and reporting of step response of control valves that are used in throttling closed loop control applications. A control valve consists of the complete, ready-to-use assembly of the control valve body, actuator, and any required accessories. The most probable accessory is a valve positioner. Single copy price: $55.00 Obtain an electronic copy from: ebeattie@isa.org Order from: Eliana Beattie, (919) 990-9228, ebeattie@isa.org CSA (CSA America, Inc.) Reaffirmations ANSI Z21.1-2005; ANSI Z21.1a-2007; ANSI Z21.1b-2008 (R201x), Household Cooking Gas Appliances (reaffirmation of ANSI Z21.1-2005; ANSI Z21.1a-2007; and ANSI Z21.1b-2008) Details test and examination criteria for household cooking appliances for use with natural, manufactured, and mixed gases; liquefied petroleum gases; and LP gas-air mixtures. The standard defines a household cooking gas appliance as an appliance for domestic food preparation, providing at least one function of (1) top or surface cooking; (2) oven cooking, or (3) broiling. Single copy price: $668.00 Order from: Cathy Rake, (216) 524-4990, cathy.rake@csa-america.org ANSI Z21.57-2005; ANSI Z21.57a-2007; ANSI Z21.57b-2008 (R201x), Recreational Vehicle Cooking Gas Appliances (reaffirmation of ANSI Z21.57-2005) Details test and examination criteria for recreational-vehicle cooking gas appliances for use with liquefied petroleum gases or for use with natural gas convertible for use with liquefied petroleum gases. This standard defines a recreational vehicle cooking gas appliance as an appliance for domestic food preparation, providing at least one function of (1) top or surface cooking, (2) oven cooking, or (3) broiling and having design features enabling it to meet the special conditions connected for use in a recreational vehicle. Single copy price: $604.00 Order from: Cathy Rake, (216) 524-4990, cathy.rake@csa-america.org ISA (ISA) New National Adoptions BSR/ISA 95.00.02 (IEC 62264-2 Modified)-201x, Enterprise-Control System Integration - Part 2: Object Models (national adoption with modifications and revision of ANSI/ISA 95.00.02-2001) This standard is part 2 of a series that defines the interfaces between manufacturing enterprise activities and control activities. Single copy price: $99.00 usd Obtain an electronic copy from: crobinson@isa.org Order from: Charles Robinson, (919) 990-9213, crobinson@isa.org ITI (INCITS) (InterNational Committee for Information Technology Standards) New National Adoptions INCITS/ISO 19111-2:2009, Geographic information - Spatial referencing by coordinates - Part 2: Extension for parametric values (identical national adoption of ISO 19111-2:2009) Specifies the conceptual schema for the description of spatial referencing using parametric values or functions. This standard applies the schema of ISO 19111 to combine a position referenced by coordinates with a parametric value to form a spatio-parametric coordinate reference system (CRS). The spatio-parametric CRS can optionally be extended to include time. Single copy price: $86.00 Obtain an electronic copy from: http://www.incits.org or http://webstore.ansi.org Order from: Global Engineering Documents, (800) 854-7179, www.global.ihs.com Send comments (with copy to BSR) to: Barbara Bennett, (202) 626-5743, bbennett@itic.org; lbarra@itic.org INCITS/ISO 19144-1:2009, Geographic information - Classification systems - Part 1: Classification system structure (identical national adoption of ISO 19144-1:2009) Establishes the structure of a geographic information classification system, together with the mechanism for defining and registering the classifiers for such a system. This standard specifies the use of discrete coverages to represent the result of applying the classification system to a particular area and defines the technical structure of a register of classifiers in accordance with ISO 19135. Single copy price: $122.00 Obtain an electronic copy from: http://www.incits.org or http://webstore.ansi.org Order from: Global Engineering Documents, (800) 854-7179, www.global.ihs.com Send comments (with copy to BSR) to: Barbara Bennett, (202) 626-5743, bbennett@itic.org; lbarra@itic.org INCITS/ISO 6709:2008/COR 1:2009, Standard representation of geographic point location by coordinates - Technical Corrigendum 1 (identical national adoption of ISO 6709:2008/COR 1:2009) This Technical Corrigendum represents the first Corrigendum to ISO 6709: 2008. Single copy price: Free Obtain an electronic copy from: http://www.incits.org or http://webstore.ansi.org Order from: Global Engineering Documents, (800) 854-7179, www.global.ihs.com Send comments (with copy to BSR) to: Barbara Bennett, (202) 626-5743, bbennett@itic.org; lbarra@itic.org
Standards Action - November 27, 2009 - Page 5 of 23 Pages NSF (NSF International) New Standards BSR/NSF 332-201x (i2), Sustainability Assessment for Resilient Floor Coverings (new standard) Issue 2 - Creates an American National Standard from the draft standard on Sustainable Resilient Flooring products. As used in this Standard, resilient floor coverings includes, but is not limited to, vinyl tile, vinyl composition tile, sheet vinyl, rubber, polymeric, and linoleum flooring products in which the wearing surface is non-textile. Also included are flooring accessories such as wall base, moldings, and stair treads. The Standard is applicable to products manufactured in one facility or multiple facilities, one country or multiple countries. Single copy price: Free Obtain an electronic copy from: http://standards.nsf.org/apps/group_public/document.php?document_ id=6567&wg_abbrev=flooring_jc Order from: Mindy Costello, (734) 827-6819, mcostello@nsf.org BSR/NSF 40-201x (i18), Residential wastewater treatment systems (revision of ANSI/NSF 40-2009) Issue 18 - Adds guidance to the appropriate wastewater treatment technology standards for requirements for access ports and to ensure that all NSF Standards have consistent requirements. Single copy price: Free Obtain an electronic copy from: http://standards.nsf.org/apps/group_public/document.php?document_ id=6546&wg_abbrev=wwt_jc Order from: Mindy Costello, (734) 827-6819, mcostello@nsf.org BSR/NSF 245-201x (i2), Wastewater treatment systems - Nitrogen Reduction (revision of ANSI/NSF 245-2007) Issue 2 - Adds guidance to the appropriate wastewater treatment technology standards for requirements for access ports and to ensure that all NSF Standards have consistent requirements. Single copy price: Free Obtain an electronic copy from: http://standards.nsf.org/apps/group_public/document.php?document_ id=6546&wg_abbrev=wwt_jc Order from: Mindy Costello, (734) 827-6819, mcostello@nsf.org TIA (Telecommunications Industry Association) BSR/TIA 470.120-C-201x, Telecommunications - Telephone Terminal Equipment - Transmission Requirements for Analog Speakerphones (revision and redesignation of ANSI/TIA 470-B-1997) Provides speakerphone acoustic performance requirements for Customer Premises Equipment (CPE) intended for analog connection to the Public Switched Telephone Network (PSTN). These requirements should ensure compatibility and satisfactory performance to the user in a high percentage of installations. Test measurement methods reference procedures in IEEE Std 1329, where applicable. Single copy price: $98.00 Obtain an electronic copy from: www.global.ihs.com Order from: Global Engineering Documents, (800) 854-7179, www.global.ihs.com Send comments (with copy to BSR) to: Ronda Coulter, (703) 907-7974, rcoulter@tiaonline.org; tjenkins@tiaonline.org UL (Underwriters Laboratories, Inc.) BSR/UL 33-201x, Standard for Safety for Heat Responsive Links for Fire Protection Service (revision of ANSI/UL 33-2005) The following changes in requirements are being proposed: (1) Editorial and text reorganization revisions; and (2) to more closely align the text with UL 199, clarify requirements, and update testing details. Single copy price: Contact comm2000 for pricing and delivery options Obtain an electronic copy from: http://www.comm-2000.com Order from: comm2000 Send comments (with copy to BSR) to: Raymond Suga, (631) 546-2593, Raymond.M.Suga@us.ul.com BSR/UL 82-201x, Standard for Safety for Electric Garden Appliances (revision of ANSI/UL 82-2007) Includes changes to the following proposals: (1) Adds requirements for pruners; and (2) Adds the option to use spiral-shaped trimmer line. Single copy price: Contact comm2000 for pricing and delivery options Obtain an electronic copy from: http://www.comm-2000.com Order from: comm2000 Send comments (with copy to BSR) to: Betty McKay, (919) 549-1896, betty.c.mckay@us.ul.com BSR/UL 496-201x, Standard for Lampholders (revision of ANSI/UL 496-2008) The following changes are being proposed: (1) Prohibits aluminum as a terminal plate material when used for field wiring and mounting in or on an outlet box; (2) Adds requirements to Table 13 for unacceptable contact-making gauge for E26d (3-way) lampholders; (3) Reinstates minimum lead wire gauge and clarifies minimum lead wire length requirements; (4) Clarifies the indoor damp location rating for refrigeration type lampholders; (5) Adds minimum RTI requirements for pilot-type lampholders and indicator lamps; (6) Replaces omitted requirement for test potential for lampholder enclosures; (7) Adds requirements to clarify marked temperature rating to reflect lowest RTI value used in body of socket; (8) Clarifies the temperature test for dimmer-type lampholders; (9) Revises the center contact dimensions for EX39 and EP39 (mogul) lampholders; and (10) Clarifies the screwthread conformity test for skeleton-type lampholders. Single copy price: Contact comm2000 for pricing and delivery options Obtain an electronic copy from: http://www.comm-2000.com Order from: comm2000 Send comments (with copy to BSR) to: Heather Sakellariou, (847) 664-2346, Heather.Sakellariou@us.ul.com BSR/UL 651-201x, Standard for Safety for Schedule 40 and 80 Rigid PVC Conduit and Fittings (Proposal dated 11-27-09) (revision of ANSI/UL 651-2008) This proposal, dated 11-27-09, provides a new marking (contrasting stripe) to identify Schedule 80 Conduit. Single copy price: Contact comm2000 for pricing and delivery options Obtain an electronic copy from: http://www.comm-2000.com Order from: comm2000 Send comments (with copy to BSR) to: Paul Lloret, (408) 754-6618, Paul.E.Lloret@us.ul.com
Standards Action - November 27, 2009 - Page 6 of 23 Pages BSR/UL 797A-201x, Standard for Safety for Electrical Metallic Tubing - Aluminum (Proposal dated 11-27-09) (revision of ANSI/UL 797A-2007) This proposal, dated 11-27-09, revises the validation of measurement means for aluminum tubing. Single copy price: Contact comm2000 for pricing and delivery options Obtain an electronic copy from: http://www.comm-2000.com Order from: comm2000 Send comments (with copy to BSR) to: Paul Lloret, (408) 754-6618, Paul.E.Lloret@us.ul.com BSR/UL 1838-201x, Standard for Low Voltage Landscape Lighting (revision of ANSI/UL 1838-2009a) The following changes are being proposed: (1) Revises the definition of Pure DC, relative to electric shock; (2) Revises the fire indicator material for abnormal tests, to correlate with UL and CSA standards; (3) Revises the Gasket Adhesion Test to correlate with UL 1598 changes; (4) Adds requirements for Class-2 power units; (5) Reduces low-voltage cable sizes for connection to Class-2 power units; (6) Waives insulation piercing terminal temperature test for Class-2 power units; (7) Revises the Temperature Test Table to reflect absolute temperature limits; (8) Increases the surface temperature limits for power units; (9) Revises tests on knockouts to correlate with other UL standards; (10) Relocates the weather test sequence for gasketed power units; (11) Expands the power supply connection options for direct plug-in power units; (12) Revises the Overload Test Flow Chart in Figure 29.1; and (13) Miscellaneous editorial revisions. Single copy price: Contact comm2000 for pricing and delivery options Obtain an electronic copy from: http://www.comm-2000.com Order from: comm2000 Send comments (with copy to BSR) to: Heather Sakellariou, (847) 664-2346, Heather.Sakellariou@us.ul.com Comment Deadline: January 26, 2010 Reaffirmations and withdrawals available electronically may be accessed at: webstore.ansi.org Projects Withdrawn from Consideration An accredited standards developer may abandon the processing of a proposed new or revised American National Standard or portion thereof if it has followed its accredited procedures. The following projects have been withdrawn accordingly: ASHRAE (American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc.) BSR/ASHRAE/ASHE Standard 170c-200x, Ventilation of Health Care Facilities (addenda to ANSI/ASHRAE/ASHE Standard 170-2008) CEA (Consumer Electronics Association) BSR/CEA 721.1-1999 (R200x), Generic Common Application Language (Generic CAL) Specification (reaffirmation of ANSI/CEA 721.1-1999 (R2004)) BSR/CEA 721.2-1999 (R200x), Generic CAL Context Description (reaffirmation of ANSI/CEA 721.2-1999 (R2004)) BSR/CEA 721.3-1999 (R200x), Node Application Layer Specification (reaffirmation of ANSI/CEA 721.3-1999 (R2004) BSR/CEA 721.4-1999 (R200x), Generic Common Application Language Quality of Service (reaffirmation of ANSI/CEA 721.4-1999 (R2004)) Correction Comment Deadline Correction BSR/UL 1086 An announcement of proposals open for comment for UL 1086 appeared in the 10/30/09 issue of Standards Action. However, the proposals are officially opened for comment as of the 11/20/09 publication, with comment due 1/4/10. ASME (American Society of Mechanical Engineers) BSR/ASME B107.100-201x, Flat Wrenches (revision, redesignation and consolidation of ANSI/ASME B107.8-2007, ANSI/ASME B107.21-2005, ANSI/ASME B107.66M-2007, ANSI/ASME B107.100-2002 (R2008)) Defines essential performance and safety requirements specifically applicable to combination wrenches, box wrenches, double head, open end wrenches, double head, flare nut, adjustable wrenches, body repair tools and ratcheting box wrenches. This standard specifies test methods to evaluate performance related to the defined requirements and safety, and indicates limitations of safe use. Single copy price: Free Obtain an electronic copy from: http://cstools.asme.org/publicreview Order from: Mayra Santiago, ASME; ANSlBOX@asme.org Send comments (with copy to BSR) to: Thomas Schellens, (212) 591-8077, schellenst@asme.org
Standards Action - November 27, 2009 - Page 7 of 23 Pages Correction BSR/UL 1786-201x Comment Deadline January 11, 2010 The November 20, 2009 issue of Standards Action had an error for the listing for UL 1786. Only 2 of the 7 topics were included in the listing. The correct information is as follows: BSR/UL 1786-201x, Standard for Direct Plug-In Nightlights (revision of ANSI/UL 1786 2005) The following changes in requirements to the Standard for Direct Plug-In Nightlights, UL 1786, are being proposed: 1. Clarify requirements in paragraph 7.7.2 to reduce risk of duplex receptacle interference 2. Restore marking requirements to include catalog number or equivalent 3. Revise requirements for accessibility of live parts to include new finger probe 4. Clarify requirements for humidity conditioning on unenergized samples 5. Correct references to grounding continuity test requirements for the United States and Canada 6. Revise Table 1 to align the thermoplastic requirements with UL 746C 7. Miscellaneous editorial corrections Single copy price: Contact comm2000 for pricing and delivery options Obtain an electronic copy from: http://www.comm 2000.com Order from: comm2000 Send comments (with copy to BSR) to: Heather Sakellariou, (847) 664 2346, Heather.Sakellariou@us.ul.com
Standards Action - November 27, 2009 - Page 8 of 23 Pages Call for Comment Contact Information The addresses listed in this section are to be used in conjunction with standards listed in Call for Comment. This section is a list of developers who have submitted standards for public review in this issue of Standards Action it is not intended to be a list of all ANSI developers. Please send all address corrections to: Standards Action Editor, American National Standards Institute, 25 West 43rd Street, New York, NY 10036 or standact@ansi.org. Order from: AMCA AMCA International, Inc. 30 West University Drive Arlington Heights, IL 60004-1893 Phone: (847) 394-0150 Fax: (847) 253-0088 Web: www.amca.org ASABE American Society of Agricultural and Biological Engineers 2950 Niles Road St Joseph, MI 49085 Phone: (269) 932-7015 Fax: (269) 429-3852 Web: www.asabe.org ASME American Society of Mechanical Engineers 3 Park Avenue, 20th Floor (20N2) New York, NY 10016 Phone: (212) 591-8521 Fax: (212) 591-8501 Web: www.asme.org ATIS Alliance for Telecommunications Industry Solutions 1200 G Street, NW Suite 500 Washington, DC 20005 Phone: (202) 434-8841 Fax: (202) 347-7125 Web: www.atis.org AWS American Welding Society 550 N.W. LeJeune Road Miami, FL 33126 Phone: (305) 443-9353 Fax: (305) 443-5951 Web: www.aws.org comm2000 1414 Brook Drive Downers Grove, IL 60515 CSA CSA America, Inc. 8501 E. Pleasant Valley Rd. Cleveland, OH 44131 Phone: (216) 524-4990 Fax: (216) 520-8979 Web: www.csa-america.org/ Global Engineering Documents Global Engineering Documents 15 Inverness Way East Englewood, CO 80112-5704 Phone: (800) 854-7179 Fax: (303) 379-2740 ISA (Organization) ISA-The Instrumentation, Systems, and Automation Society 67 Alexander Drive Research Triangle Park, NC 27709 Phone: (919) 990-9228 Fax: (919) 549-8288 Web: www.isa.org NSF NSF International 789 N. Dixboro Road Ann Arbor, MI 48105 Phone: (734) 827-6819 Fax: (734) 827-7875 Web: www.nsf.org
Standards Action - November 27, 2009 - Page 9 of 23 Pages Send comments to: AMCA AMCA International, Inc. 30 West University Drive Arlington Heights, IL 60004-1893 Phone: (847) 394-0150 Fax: (847) 253-0088 Web: www.amca.org ASABE American Society of Agricultural and Biological Engineers 2950 Niles Road St Joseph, MI 49085 Phone: (269) 932-7015 Fax: (269) 429-3852 Web: www.asabe.org ASME American Society of Mechanical Engineers 3 Park Avenue, 20th Floor (23E4) New York, NY 10016 Phone: (212) 591-8077 Fax: (212) 591-8501 Web: www.asme.org ATIS Alliance for Telecommunications Industry Solutions 1200 G Street, NW Suite 500 Washington, DC 20005 Phone: (202) 434-8841 Fax: (202) 347-7125 Web: www.atis.org AWS American Welding Society 550 N.W. LeJeune Road Miami, FL 33126 Phone: (305) 443-9353, Ext. 466 Fax: (305) 443-5951 Web: www.aws.org CEA Consumer Electronics Association 1919 South Eads Street Arlington, VA 22202 Phone: (703) 907-5267 Fax: (703) 907-4194 Web: www.ce.org CSA CSA America, Inc. 8501 E. Pleasant Valley Rd. Cleveland, OH 44131 Phone: (216) 524-4990 Fax: (216) 520-8979 Web: www.csa-america.org/ ISA (Organization) ISA-The Instrumentation, Systems, and Automation Society 67 Alexander Drive Research Triangle Park, NC 27709 Phone: (919) 990-9228 Fax: (919) 549-8288 Web: www.isa.org ITI (INCITS) InterNational Committee for Information Technology Standards 1101 K Street NW, Suite 610 Washington, DC 20005 Phone: (202) 626-5743 Fax: (202) 638-4922 Web: www.incits.org NSF NSF International 789 N. Dixboro Road Ann Arbor, MI 48105 Phone: (734) 827-6819 Fax: (734) 827-7875 Web: www.nsf.org TIA Telecommunications Industry Association 2500 Wilson Blvd. Arlington, VA 22201 Phone: (703) 907-7974 Fax: (703) 907-7727 Web: www.tiaonline.org UL Underwriters Laboratories, Inc. 333 Pfingsten Road Northbrook, IL 60062-2096 Phone: (847) 664-2346 Fax: (847) 313-2346 Web: www.ul.com/
Standards Action - November 27, 2009 - Page 10 of 23 Pages Call for Members (ANS Consensus Bodies) Directly and materially affected parties who are interested in participating as a member of an ANS consensus body for the standards listed below are requested to contact the sponsoring standards developer directly and in a timely manner. AWWA (American Water Works Association) Office: 6666 W. Quincy Ave Denver, CO 80235 Contact: Dawn Flancher Phone: 303-347-6195 Fax: 303-795-7603 E-mail: dflancher@awwa.org BSR/AWWA 15.501-201x, Wastewater Treatment Plant Operations and Management Standards Committee is seeking volunteers in the Producer classifications with wastewater experience. (new standard) BSR/AWWA 15.502-201x, Wastewater Collection System Standards Committee is seeking volunteers in the General Interest, Producer, and User classifications with wastewater experience. (new standard) BSR/AWWA 15.503-201x, Wastewater Pretreatment Standards Committee is seeking volunteers in the General Interest, Producer, and User classifications with wastewater experience. (new standard) BSR/AWWA 15.504-201x, Wastewater Biosolids Standards Committee is seeking volunteers in the General Interest, Producer, and User classifications with wastewater experience. (new standard) BICSI (Building Industry Consulting Service International) Office: 8610 Hidden River Parkway Tampa, FL 33637 Contact: Jeff Silveira Phone: (813) 903-4712 Fax: (813) 971-4311 E-mail: jsilveira@bicsi.org BSR/BICSI 004-201x, Information Transport Systems Design and Implementation Best Practices for Healthcare Institution and Facilities (new standard) BIFMA (Business and Institutional Furniture Manufacturers Association) Office: 678 Front Avenue NW, Suite 150 Grand Rapids, MI 49504-5368 Contact: Richard Driscoll Phone: (616) 285-3963 Fax: (616) 285-3765 E-mail: rdriscol@bifma.org CAGI (Compressed Air and Gas Institute) Office: 1300 Sumner Avenue Cleveland, OH 44115-2851 Contact: Christopher Johnson Phone: (216) 241-7333 Fax: (216) 241-0105 E-mail: cjohnson@thomasamc.com; cagi@cagi.org BSR/CAGI B19.1-201x, Safety Standard for Air Compressor Systems (new standard) CEA (Consumer Electronics Association) Office: 1919 South Eads Street Arlington, VA 22202 Contact: Alayne Bell Phone: (703) 907-5267 Fax: (703) 907-4194 E-mail: ABell@CE.org; Carce@CE.org BSR/CEA 109-D-201x, Intermediate Frequencies for Entertainment Receivers (new standard) ITI (INCITS) (InterNational Committee for Information Technology Standards) Office: 1101 K Street NW, Suite 610 Washington, DC 20005 Contact: Barbara Bennett Phone: (202) 626-5743 Fax: (202) 638-4922 E-mail: bbennett@itic.org; lbarra@itic.org INCITS/ISO 19111-2:2009, Geographic information - Spatial referencing by coordinates - Part 2: Extension for parametric values (identical national adoption of ISO 19111-2:2009) INCITS/ISO 19144-1:2009, Geographic information - Classification systems - Part 1: Classification system structure (identical national adoption of ISO 19144-1:2009) INCITS/ISO 6709:2008/COR 1:2009, Standard representation of geographic point location by coordinates - Technical Corrigendum 1 (identical national adoption of ISO 6709:2008/COR 1:2009) BSR/BIFMA X5.1-200x, General Purpose Office Chairs - Tests (revision of ANSI/BIFMA X5.1-2002) BSR/BIFMA X5.6-200x, Office Furniture - Panel Systems - Tests (revision of ANSI/BIFMA X5.6-2003)
Standards Action - November 27, 2009 - Page 11 of 23 Pages TIA (Telecommunications Industry Association) Office: 2500 Wilson Blvd Arlington, VA 22201 Contact: Ronda Coulter Phone: (703) 907-7974 Fax: (703) 907-7727 E-mail: rcoulter@tiaonline.org; tjenkins@tiaonline.org BSR/TIA 102.CAAA-C-1-201x, Digital C4FM/CQPSK Transceiver Measurement Methods - Addendum 1 - Faded Channel Simulator (addenda to ANSI/TIA 102.CAAA-C-2008) BSR/TIA 470.120-C-201x, Telecommunications - Telephone Terminal Equipment - Transmission Requirements for Analog Speakerphones (revision and redesignation of ANSI/TIA 470-B-1997) UL (Underwriters Laboratories, Inc.) Office: 12 Laboratory Drive Research Triangle Park, NC 27709 Contact: Valara Davis Phone: (919) 549-0921 Fax: (919) 547-6427 E-mail: Valara.Davis@us.ul.com BSR/UL 1030-201x, Standard for Safety for Sheathed Type Heating Elements (revision of ANSI/UL 1030-2009)
Standards Action - November 27, 2009 - Page 12 of 23 Pages Final actions on American National Standards The standards actions listed below have been approved by the ANSI Board of Standards Review (BSR) or by an ANSI-Audited Designator, as applicable. AAMI (Association for the Advancement of Medical Instrumentation) Supplements ANSI/AAMI ES60601-1:2005/Amendment 1-2009, Medical electrical equipment - Part 1: General requirements for basic safety and essential performance (supplement to ANSI/AAMI ES60601-1-2005): 11/20/2009 ANS (American Nuclear Society) New Standards ANSI/ANS 40.37-2009, Mobile Low-Level Radioactive Waste Processing Systems (new standard): 11/20/2009 ATIS (Alliance for Telecommunications Industry Solutions) ANSI ATIS 0300202-2009, Interwork Operations Guidelines for Network Management of Public Telecommunications Networks under Disaster Conditions (revision, redesignation and consolidation of ANSI ATIS 0300202-2004): 11/20/2009 Withdrawals ANSI ATIS 0300233-2004, OAM&P - Security Framework for Telecommunications Management Network (TMN) Interfaces (withdrawal of ANSI ATIS 0300233-2004): 11/20/2009 ANSI ATIS 0327000-2004, CORBA Generic Network and NE Level Information Model (withdrawal of ANSI ATIS 0327000-2004): 11/20/2009 AWS (American Welding Society) Reaffirmations ANSI/AWS F2.2-2001 (R2009), Lens Shade Selector (reaffirmation of ANSI/AWS F2.2-2001): 11/20/2009 ANSI/AWS G1.2M/G1.2-1999 (R2010), Specification for Standardized Ultrasonic Welding Test Specimen for Thermoplastics (reaffirmation of ANSI/AWS G1.2M/G1.2-1999): 11/20/2009 ANSI/CEA 633.38-1997, PL and RF Symbol Encoding Physical Layer Conformance (withdrawal of ANSI/CEA 633.38-1997 (R2004)): 11/20/2009 ANSI/CEA 633.42-2000, Node Data Link Layer Conformance (withdrawal of ANSI/CEA 633.42-2000 (R2006)): 11/20/2009 ANSI/CEA 844-2001, XML Encoding of Generic Common Application Language (withdrawal of ANSI/CEA 844-2001): 11/20/2009 ITI (INCITS) (InterNational Committee for Information Technology Standards) ANSI INCITS 378-2009, Information technology - Finger Minutiae Format for Data Interchange (revision of ANSI INCITS 378-2004): 11/20/2009 Supplements ANSI INCITS 407 Erratum-2009, Information Technology - BIOS Enhanced Disk Drive Services - 3 (EDD-3), Erratum (supplement to ANSI INCITS 407-2005): 11/20/2009 NEMA (National Electrical Manufacturers Association) ANSI/NEMA MW 1000 Rev. 1-2009, Magnet Wire (revision of ANSI/NEMA MW 1000-2008): 11/20/2009 RPTIA (Recreational Park Trailer Industry Association) ANSI A119.5-2009, Recreational Park Trailer Standard 2009 Edition (revision of ANSI A119.5-2005): 11/20/2009 CEA (Consumer Electronics Association) Withdrawals ANSI/CEA 600.42-1997, Node Medium Access Control Sublayer (withdrawal of ANSI/CEA 600.42-1997 (R2004)): 11/20/2009 ANSI/CEA 600.43-1997, Node Logical Link Control Sublayer (withdrawal of ANSI/CEA 600.43-1997 (R2004)): 11/20/2009 ANSI/CEA 600.82-1997, CAL Context Description (withdrawal of ANSI/CEA 600.82-1997 (R2004)): 11/20/2009 ANSI/CEA 633.37-1997, Symbol Encoding Sublayer Physical Layer Conformance (withdrawal of ANSI/CEA 633.37-1997 (R2004)): 11/20/2009
Project Initiation Notification System (PINS) Standards Action - November 27, 2009 - Page 13 of 23 Pages ANSI Procedures require notification of ANSI by ANSI-accredited standards developers (ASD) of the initiation and scope of activities expected to result in new or revised American National Standards (ANS). Early notification of activity intended to reaffirm or withdraw an ANS and in some instances a PINS related to a national adoption is optional. The mechanism by which such notification is given is referred to as the PINS process. For additional information, see clause 2.4 of the ANSI Essential Requirements: Due Process Requirements for American National Standards. Following is a list of proposed actions and new ANS that have been received recently from ASDs. Please also review the section in Standards Action entitled "American National Standards Maintained Under Continuous Maintenance" for additional or comparable information with regard to standards maintained under the continuous maintenance option. To view information about additional standards for which a PINS has been submitted and to search approved ANS, please visit www.nssn.org, which is a database of standards information. Note that this database is not exhaustive. Directly and materially affected interests wishing to receive more information or to submit comments are requested to contact the standards developer directly within 30 days of the publication of this announcement. ACMA (American Composites Manufacturers Association) Office: 1010 N. Glebe Road Suite 450 Arlington, VA 22201 Contact: Larry Cox Fax: (703) 525-0743 E-mail: lcox@acmanet.org BSR/ACMA UEF-1-201x, Estimating Emission Factors from Open Molding and Other Processes (revision of ANSI/ICPA/ACMA UEF-1-2009a) Stakeholders: Composite manufacturers, suppliers to the composites industry, government regulatory agencies. Project Need: To help composites manufacturers, who are required to report air emissions from their facilities. Without sanctioned factors, each facility would be required to conductive prohibitive emissions testing. Adds new emision factors for the compression molding of SMC (Sheet Molding Compound), BMC (Bulk Molding Compound), and LCM (Liquid Composite Molding). ADA (American Dental Association) Office: 211 East Chicago Avenue Chicago, IL 60611-2678 Contact: Sharon Stanford Fax: (312) 440-2529 E-mail: stanfords@ada.org; bralowerp@ada.org; medick@ada.org BSR/ADA Specification No. 1058-201x, Antemortem Forensic Dental Data Set (new standard) Stakeholders: Forensic odontologists, dental professionals, medical professionals, government and law enforcement officials. Project Need: The establishment of a positive identification of human remains by a Forensic Odontologist requires supporting documentation from the dentist who treated the patient during life. Dentists have a need for a standardized electronic format to transfer this data and for standardized descriptors used to code this information to increase the likelihood of accurate identification. Develops uniform nomenclature for the description of forensic dental data, to define a standardized set of uniform terms to convey this information, and to establish the requirements for electronic transmission of forensic dental data. ASME (American Society of Mechanical Engineers) Office: 3 Park Avenue, 20th Floor (20N2) New York, NY 10016 Contact: Mayra Santiago Fax: (212) 591-8501 E-mail: ansibox@asme.org BSR/ASME PTC 22-201x, Gas Turbines (revision of ANSI/ASME PTC 22-2005) Stakeholders: Users, manufacturers, designers, consultants, and government agencies. Project Need: to the current Standard are needed as a result of technological changes. Provides for the testing of gas turbines supplied with gaseous or liquid fuels (or solid fuels converted to liquid or gas prior to entrance to the gas turbine). Tests of gas turbines with emission control and/or power augmentation devices, such as injection fluids and inlet air treatment, are included. It may be applied to gas turbines in combined cycle plants or with other heat recovery systems. ASTM (ASTM International) Office: 100 Barr Harbor Drive West Conshohocken, PA 19428-2959 Contact: Jeff Richardson Fax: (610) 834-7067 E-mail: jrichard@astm.org BSR/ASTM WK26329-201x, New Practice for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe with SI Units (new standard) Stakeholders: Reinforced plastic piping systems and chemical equipment industry. Project Need: http://www.astm.org/database.cart/workitems/wk26329. htm http://www.astm.org/database.cart/workitems/wk26329.htm BSR/ASTM WK26352-201x, New Practice for Sports and Recreation Facility Surface Systems Flammability (new standard) Stakeholders: Sports equipment and facilities industry. Project Need: http://www.astm.org/database.cart/workitems/wk26352. htm http://www.astm.org/database.cart/workitems/wk26352.htm
Standards Action - November 27, 2009 - Page 14 of 23 Pages BSR/ASTM WK26357-201x, New Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe in SI units (new standard) Stakeholders: Reinforced plastic piping systems and chemical equipment industry. Project Need: http://www.astm.org/database.cart/workitems/wk26357. htm http://www.astm.org/database.cart/workitems/wk26357.htm BSR/ASTM WK26358-201x, New Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe (new standard) Stakeholders: Reinforced plastic piping systems and chemical equipment industry. Project Need: http://www.astm.org/database.cart/workitems/wk26358. htm http://www.astm.org/database.cart/workitems/wk26358.htm ATIS (Alliance for Telecommunications Industry Solutions) Office: 1200 G Street, NW Ste. 500 Suite 500 Washington, DC 20005 Contact: Kerrianne Conn Fax: (202) 347-7125 E-mail: kconn@atis.org BSR ATIS 0500019-201x, Request For Assistance Interface (RFAI) (new standard) Stakeholders: Communications Industry. Project Need: This standard will address the activities associated with developing the RFAI specification. This standard addresses the activities associated with developing the RFAI specification. BICSI (Building Industry Consulting Service International) Office: 8610 Hidden River Parkway Tampa, Fl 33637 Contact: Jeff Silveira Fax: (813) 971-4311 E-mail: jsilveira@bicsi.org BSR/BICSI 003-201x, Information Transport Systems Design and Implementation Best Practices for Post-Secondary Educational Institutions (new standard) Stakeholders: Telecom, telecommunications and IT consultants and project managers. Project Need: To enable post-secondary education ITS design in the building development process by contributing to architectural considerations and providing information that cuts across multidisciplinary design efforts. Provides an information transport systems (ITS) infrastructure standard that identifies systems topologies, design considerations, installation, testing, documentation, and performance requirements for post-secondary education. BSR/BICSI 004-201x, Information Transport Systems Design and Implementation Best Practices for Healthcare Institution and Facilities (new standard) Stakeholders: Telecom, telecommunications and IT consultants and project managers. Project Need: Addresses design and installation requirements to support multi-product and multi-vendor components used to develop telecommunications systems. Specifies design and installation requirements for telecommunications information technology systems within a healthcare building and between healthcare buildings in a campus environment. This standard defines terms and recommends cabling types and topology while also providing additional useful systems information and guidance on coordination between design and construction disciplines. CAGI (Compressed Air and Gas Institute) Office: 1300 Sumner Avenue Cleveland, OH 44115-2851 Contact: Christopher Johnson Fax: (216) 241-0105 E-mail: cjohnson@thomasamc.com; cagi@cagi.org BSR/CAGI B19.1-201x, Safety Standard for Air Compressor Systems (new standard) Stakeholders: Manufacturers, users and specifiers of compressed air system equipment. Project Need: To create a safety standard for air compressor Addresses all aspects of air-compressor systems from the entrance to the inlet device through the compressor and associated heat exchangers, dryers, and pulsation-suppression devices to the point of entry to the distribution system. EIA (Electronic Industries Alliance) Office: 2500 Wilson Boulevard - Suite 310 Suite 310 Arlington, VA 22201 Contact: Cecelia Yates Fax: (703) 875-8908 E-mail: cyates@ecaus.org BSR/EIA 966-201x, Specification for Unshielded Dual Port Serial Attachment Connector (new standard) Stakeholders: Electrical, electronics and telecommunications Project Need: The SFF Committee has requested that their specification SFF-8482 be developed as an EIA specification. Defines the mechanical and connector contact performance requirements for a composite connector system. BSR/EIA 967-201x, Specification for Micro Serial Attached SCSI (SAS) Connector (new standard) Stakeholders: Electrical, electronics and telecommunications Project Need: The SFF Committee has requested that their specification SFF-8436 be developed as an EIA Specification. Defines the terminology and physical requirements for the mating interface and physical characteristics of the Micro SAS Connector System.