ilinear R60 LED Ribbon Strip ATG Electronics ilinear R60 LED Ribbon Strip is a flexible, high brightness LED strip light, designed for interior lighting applications. Its small size and cool light output make ilinear R60 ideal for a Family Model: HFS-R360R-600600-L1 HFS-R360Y-600600-L1 HFS-R360B-600600-L1 HFS-R360G-600600-L1 HFS-R360N-60060I-L1 wide range of applications such as cove lighting, back lighting, illumination lighting, guidance lighting, and channel letter lighting. Features: Long life span of over 50,000 hours; Flexible & slim form segmentable at every 3 LEDs; Easy installation on most flat surfaces using 3M self-adhesive tape; Emits higher brightness at lower cost with super bright SMD LEDs; Produces even color between strips at the tightest color tolerances; Low heat generation virtually no risk of heat damage. ATG Electronics Corp. Light your world Color your life!
Applications: Decorative lighting (cove lighting, back lighting) for homes, hotels, stores, yachts, bars, automobiles, etc.; Lighting in any location where you wish to do away with conventional illumination so as to reduce heat output; Guidance lighting for cinemas, theaters, yachts, trains, etc. to guide people on safe paths; Channel letter lighting for your stores, restaurants, bars, and other public establishments. Custom Design Service: PCB: color and size (length, width, thickness) Colors: red, yellow, blue, green, white, pink, violet, and mixtures LED Quantity: 60 LEDs/m; more or less as per request Working Voltage: 12 VDC, 24 VDC, etc. Housing: material, shape Waterproof treatment: yes ilinear R60 for Cove Lighting ilinear R60 can be installed into confined spaces such as pelmets, coffer ceilings, and coves. You can creatively use it to decorate your home, hotel, store, yacht, bar, automobile, trains, etc. ilinear R60 is the flexible solution for any venue where you need professional cove lighting. It can be easily flexed into different shapes, letters, or symbols.
ilinear R60 for Back Lighting ilinear R60 can be applied as back lighting in your stores, bars and other entertainment venues. With this method, you can make your place more colorful and a more extraordinary experience for customers. ilinear R60 for Illumination Lighting Conventional lighting produces large amounts of heat which may cause heat damage, potentially affecting your health & your property, such as furniture. ilinear R60 can be used as illumination lighting without the heat output, rendering the chances of heat damage virtually zero. You can easily connect several ilinear R60 Strip Lights to achieve your ideal illumination levels. ilinear R60 for Guidance Lighting ilinear R60 provides a flexible light source ideal for applications such as cinema light installations and guidance lighting in aisles and pathways. You can use ilinear R60 to illuminate dark stages and hard to navigate areas to guide people safely.
ilinear R60 for Channel Letter Lighting Because of its pliability, you can manipulate ilinear R60 into different shapes and letters. With ilinear R60, you can easily attract the attention of your potential customers in just the way you want.
Ordering Information Typical Order Example: RS06L1603206W0 SERIES LENGTH VOLTAGE COLOR/CCT LED PROTECTION LEDs/M PCB RS=Ribbon Strip 06=6m L1=12V L2=24V R0=Red T0=RGB Y0=Yellow 30=3000K G0=Green 60=6000K 32=3528 SMD 0=Non-waterproof R=Resin waterproof 6=60 LEDs/m W0=White PCB Y0=Yellow PCB B0=Blue Technical Specifications Physical Specifications Dimension (one roll) Connectors PCB Type Work Environment L6000*W11*H2 mm (L236*W0.43*0.08 inch) 2-pin power connector White flexible PCB Indoor use (applicable for dry environment) Electrical Specifications Lighting Source LED Quantity Operation Voltage Operation Current Power Consumption Maximum Series-wound Quantity Power Supply Control System SMD LED 60 LEDs/m 12 VDC 2.4 A 24 W 6 m (19.6 ft) 12 VDC QDriver / XDriver LED Power Supply QColor Remote Dimmer (Part No: HCD-00001-000000-RD) Optical Specifications Color range Red Yellow Blue Green White MCD (single LED) 380 400 250 800 1600 Luminous Flux (one roll) 1650 Beam Angle (degree) 120 120 120 120 120 Lumen Maintenance >95%@1,000hrs >95%@1,000hrs >95%@1,000hrs >95%@1,000hrs >95%@1,000hrs Wavelength (nm) 605-700 580-595 435-480 500-560nm * *Color temperature: 2800-3200 K, 5500-6500 K
ATG Electronics Corp. 628 Zhangyang Road, Suite 1-21B, Shanghai 200122, CHINA E-mail: sales@atgelectronics.com Phone: +86-21-58350166 Fax: +86-21-58351977 V5.3-130228