A brand by G20 ENGINEERING thea 35 MR/MN Kondens Wall-mounted condensing boiler
thea boiler The range of wall boilers Thea models is completed by Thea 35 MR MN Kondens model. It is a perfect, powerful, dependable and eco-friendly boiler, with a condensing heat exchanger with high efficiency, everything being produced in Italy. The boiler has an electronic main board with a microprocessor able to manage the system so it works with maximum efficiency and minimal waste. Excellent components make the boiler indispensable for the places where the requirements for domestic comfort, for a clean and livable environment are very high. WHY INSTALLING A THEA KONDENS BOILER? We didn t think that we can produce a boiler that it works with minimum of wastes and maximum of savings. Thanks to this reason, the Thea 35 MR MN Kondens boiler has all the necessary technical solutions to realize an efficient and safe functioning, during heating of domestic environment and also of domestic hot water. We chose real and exclusive solutions to achieve and share present and considerable targets. The special heat exchanger is optimized into dimensions, materials and also inside geometry, so is being realized paying close attention and thorough compliance to all the necessary natural rules, to obtain great performances, resistance and reliability in time. The high performance of power supply is obtained through a simple but foolproof system; choosing and producing high technology components makes boiler reliable and versatile. Projecting effort and the particular solutions make boiler ergonomic, easy to be maintained in spite of its small dimensions. Adopting some solutions without any compromise let us return to the application context of the Thea 35 Kondens boiler. Thinking of a better future, saving and efficiency can be obtained with a great respect for the environment. The perfect combustion and features of the special burner reduce as much as it can the polluting emissions. The energy, economic and ecological efficiency makes Thea 35 MR MN Kondens boiler a domestic system of comfort.
EFFICIENCY Its unique and exclusive technology allows excellent performances in terms of energy efficiency. INSULATION To reduce energy dispersion into the room where the boiler is installed, both primary heat exchanger and plate heat exchanger have been insulated. The Thea 35 MR MN Kondens boiler is predisposed for the use of a remote control to check over functions and efficiency, warning faults. Also it works as a weekly programmer. Electronic control panel, simple and efficient, always visible and clear Bi-metal, modular, completely verifiable exchanger, at high performance and resistance.
Total access to all components, no keys solutions at the most difficult points. New concept boiler frame with non invasive but necessary supports. Ceramic burner at a reverse flame, mixing systems at high efficiency and total accessibility. Combustion chamber with increased volume and high resistance. Mechanical Pre-charged expansion tanks: The new mechanical pre-charged expansion tanks permanently solve the problems of microleakages which occur with air expansion tanks. Moreover the total ABSENCE of air permits a 20% increase of the expansion tank capacity, the total volume being equal.
TECHNICAL DATA: TECHNICAL DATA U. M. THEA 35 MN KONDENS THEA 35 MR KONDENS Category II2H3+ II2H3+ NOx Class 5 5 Type B23p/C13/C33/ C43/C53/C63/C83 B23p/C13/C33/ C43/C53/C63/C83 Reference gas G20 G31 G20 G31 Max. Nominal Load kw 5/32,9 5/32,9 Max. /Min. Power 80-60 kw 4,8/32,25 4,8/32,25 Max. Power 50-30 kw 35,2 35,2 Power 50-30 kw 11,09 11,09 Efficiency 80-60 % 98,7 98,7 Efficiency 50-30 % 107 107 Part load 50-30 (30% Pn) % 108 108 Fume T. net G20 room T. 20 C 66 66 Gas consumption G20 m³/h 3,54 3,54 G30/31kg/h 2,64 2,64 Heating water temperature C 27-80 27-80 Expansion vessel capacity I 6+6 6+6 Expansion vessel pressure bar 1 1 Min/Max. heating pressure bar 0,8-3,0 0,8-3,0 Domestic hot water flow rate ΔT 25 C l/min 17,8 - Domestic hot water pressure max bar 10 - Domestic hot water pressure min bar 0,5 - Domestic hot water temp. Min./Max. C 30-60 - Electricity supply V/Hz 250/50 230/50 Power consumption W 170 170-30 Protection grade of electric system IP X4D X4D Weight Kg 52 50 STANDARD EQUIPMENT Condensing trap kit ACCESSORIES Concentric kit 60/100 CE approved with inspection polypropylene L=750mm Plastic parallel pipe starting kit 80/80 Concentric vertical adapter External probe NTC 10K Connections kit Wall carton template Remote control 3 way valve kit 3 4 for indirect tank including NTC probe 3 way valve kit 1 for indirect tank including NTC probe ALSO AVAILABLE IN HEAT ONLY VERSION
A brand by G20 ENGINEERING G20 ENGINEERING SRL Loc. Campogrande, 13 29013 CARPANETO PIACENTINO (PC)- tel. + 39 0523 850513 - fax. +39 0523 850712 www.aircontrol-pc.com - www.g20engineering.com