IL ELECTRIC GRIDDLES MODELS 7TA, 7TA, 78TA, 70TA, 77TA CHROME MODELS 7TCHSA, 7TCHSA, 78TCHSA, 70TCHSA, 77TCHSA 7TA Installation and Operation Instructions M-Z Rev. A // MODELS 70TA- & 77TA- Not approved for Canada ANSI/NSF
SAFET SMBOL These symbols are intended to alert the user to the presence of important operating and maintenance instructions in the manual accompanying the appliance. RETAIN THIS MANUAL FOR FUTURE REFERENCE NOTICE Using any part other than genuine Star factory supplied parts relieves the manufacturer of all liability. Star reserves the right to change specifications and product design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment. Due to periodic changes in designs, methods, procedures, policies and regulations, the specifications contained in this sheet are subject to change without notice. While Star International Holdings Inc., Company exercises good faith efforts to provide information that is accurate, we are not responsible for errors or omissions in information provided or conclusions reached as a result of using the specifications. By using the information provided, the user assumes all risks in connection with such use. MAINTENANCE AND REPAIRS Contact your local authorized service agent for service or required maintenance. Please record the model number, serial number, voltage and purchase date in the area below and have it ready when you call to ensure a faster service. Model No. Serial No. Voltage Purchase Date Authorized Service Agent Listing Reference the listing provided with the unit or for an updated listing go to: Website: E-mail www.star-mfg.com customerservice@star-mfg.com Service Help Desk Business 8:00 am to :0 p.m. Central Standard Time Hours: Telephone: () 78-0 Fax: () 78-7 E-mail Website: customerservice@star-mfg.com www.star-mfg.com Mailing Address: Star International Holdings Inc., Company 0 Sunnen Drive St. Louis, MO U.S.A
CAUTION GENERAL INFORMATION This equipment is designed and sold for commercial use only by personnel trained and experienced in its operation and is not sold for consumer use in and around the home nor for use directly by the general public in food service locations. For equipment to be used by the general public, please contact the factory. INSTALLATION The griddles are equipped for the voltage indicated on the nameplate mounted on the front panel. They will operate on alternating current (AC) only. DO NOT CONNECT TO DIRECT CURRENT (DC). WARNING The installation of the electric griddle should conform to the: NATIONAL ELECTRIC CODE AND ALL LOCAL ELECTRIC CODES AND ORDINANCES AND THE LOCAL ELECTRIC COMPAN RULES AND REGULATIONS For your protection we recommend that a qualified electrician install this griddle. He should be familiar with electrical installations and all electric codes. Proper connections and power supply are essential for efficient performance. The external wiring should be in conduit or an approved type of flexible cable suitable for operation at the temperature indicated on the wiring diagram, and of a proper size to carry the load. The supply circuit should be properly fused and equipped with a means of disconnecting, as required by local electrical code. THE BOD OF THE GRIDDLE SHOULD BE GROUNDED (DO NOT GROUND TO A GAS SUPPL LINE). EHAUST CANOP Griddles inherently create a good deal of heat and smoke and should be installed under an efficient exhaust hood with flame proof filters. A vertical distance of not less than 8 shall be provided between the top of the appliance and filters or any other combustible material. Exhaust installation must conform to local codes. AIR SUPPL: Provisions for adequate air supply must be provided. M-Z, Ultra-Max Electric Griddle GENERAL OPERATING PROCEDURES The Ultra-Max series electric griddles may be wired for operation in the field for either -phase or -phase power supplies by making line connections at the junction box(es) located at the rear of the unit. Models 7T-0/00V, 7T-0/00V & 78T-0/00V, should be wired for -phase power supply only. Two junction boxes are provided on the 70T & 77T for making line connections. CONNECTING POWER SUPPL Detach cover on junction box at rear of unit. There is a terminal block for the supply connection in the junction box. Wires can be rerouted in the terminal block for phase hook-up. See wiring diagrams and model voltage on unit panel LOCATING AND LEVELING THE UNIT Do not install the unit closer than -inch from a side wall and/or closer than -inch from a rear wall. Make sure the unit is properly ventilated. Level unit by adjusting the () feet which have an adjustment of -/ (.75mm) for accurate leveling and perfect line-up with other Ultra-Max series units.
GENERAL OPERATING PROCEDURES continued SEASONING THE GRIDDLE HEATING SURFACE Before initial use, clean the griddle surface thoroughly with hot soap and water. See Griddle care on page for further information. After the griddle has been thoroughly cleaned, it should be seasoned to prevent food from sticking. Before using and after each thorough scouring, season the griddle heating surface in the following manner.. Remove any shipping material from the cooking surface and thouroughly clean the entire grill with hot soap and water.. Turn temperature control dials to 50 F (77 C).. Using a clean cloth, not a spatula, brush a thin film of cooking oil over the griddle cooking surface. This film should remain on the hot griddle surface for half an hour.. Remove the excess oil and wipe clean. 5. Apply another film of cooking oil over the hot cooking area for another half hour and again remove excess oil and wipe clean. The griddle surface should now be ready for use. Even with careful seasoning, food may, to some extent, stick to the griddle cooking surface until the griddle plate is broken in. TEMPERATURE CONTROL The temperature controls are combination ON/OFF switches and thermostats. Turning the dial knob automatically maintains the selected heat range. The Ultra-Max electric griddle line has one thermostat for every (0cm) section of griddle that operates independently of one another. Each thermostat controls the section of the griddle above it and may be set at different temperatures as desired. COOKING Set the thermostat dial knob at the temperature desired. After a short pre-heating period, the thermostat will automatically maintain the selected temperature. IDLING During idle periods, to save on operating costs, lower the temperature setting of the thermostat to about 50 F ( C). It is not necessary to maintain cooking temperature during idle periods, as the griddle can quickly be reheated to the desired temperature. SIGNAL LIGHTS Each thermostat has its own signal light which indicates when the unit s control knob is in the on position. Cooking surface will be hot when the control knob is in this position. M-Z, Ultra-Max Electric Griddle
CLEANING GRIDDLE CARE (NON-CHOME SURFACES) It takes very little time and effort to keep the griddle attractive and performing at top efficiency. If grease is permitted to accumulate, it will form a gummy cake and then carbonize into a hard substance which is extremely difficult to remove. To prevent this condition, the following suggestions for cleanliness should be followed:. After each use, scrape the griddle with a scraper or flexible spatula to remove excess grease and food. A waste drawer is provided for the drippings. If there is an accumulation of burned on grease and food, the griddle should be thoroughly scoured and re-seasoned. Use pumice or griddle stone while the griddle is warm. Do not use steel wool because of the danger of steel slivers getting into the food.. Daily, use a clean cloth and a good non-abrasive cleaner to clean the stainless steel body of the griddle. Wipe the polished front with a soft cloth.. At least once a day, remove the waste drawer and wash in the same way as an ordinary cooking utensil. The drawers are removed by pulling forward until they are released from their track. CAUTION GRIDDLE CARE (CHROME SURFACES) (Chrome surface griddles are marked with CHS at the end of the model number designation on the nameplate.) It takes very little time and effort to keep this Industrial Chrome griddle surface sparkling clean and performing at top efficiency. DO NOT allow grease to accumulate as it will carbonize and become difficult to remove. To prevent this condition, the following cleaning suggestions should be followed:. Remove excess oil and food regularly with a (00mm) wide razor sharp type scraper and wipe surface with a damp cloth if desired.. Following the scraping, for end of the day cleaning, a damp cloth and a non-silicated, nonabrasive, non-chlorinated cleaner such as Bon-Ami may be used to wipe surface clean, followed by wiping with clean wet cloth.. Follow steps and from Griddle Care (Non-Chrome Surfaces). M-Z, Ultra-Max Electric Griddle CAUTION CAUTION ON CROME SURFACES:. Never use pumice, griddle stones, or abrasives on the surface.. Never strike the griddle surface with a sharp instrument or spatula edge.. Never use steel wool.. Never use commercial liquid grill cleaner on the griddle surface. 5. Abusing the surface voids the warranty. GREASE DRAWER A grease drawer is located at the front can be removed for cleaning by pulling drawer forward. This drawer contains hot grease and should be checked and emptied when necessary or at least once a day. EERCISE ETREME CARE IN HANDLING THE GREASE DRAWER CONTAINING HOT GREASE. Never pour large amounts of water onto a hot griddle surface, the sudden temperature change generated by the steam can cause the surface to warp and possibly the thermal sensors in your hood fire suppression system to discharge. Instead follow the cleaning procedures in this manual. MAINTENANCE AND REPAIRS Contact the factory, a service representative, or a local service company for service or required maintenance. 5
Visit our Website at: www.star-mfg.com Email: customerservice@star-mfg.com THOROUGHL INSPECT OUR UNIT ON ARRIVAL This unit has been tested for proper operation before leaving our plant to insure delivery of your unit in perfect condition. However, there are instances in which the unit may be damaged in transit. In the event you discover any type of damage to your product upon receipt, you must immediately contact the transportation company who delivered the item to you and initiate your claim with same. If this procedure is not followed, it may affect the warranty status of the unit. LIMITED EQUIPMENT WARRANT All workmanship and material in Star products have a one () year limited warranty on parts & labor in the United States and Canada. Such warranty is limited to the original purchaser only and shall be effective from the date the equipment is placed in service. Star's obligation under this warranty is limited to the repair of defects without charge, by the factory authorized service agency or one of its sub-agencies. Models that are considered portable (see below) should be taken to the closest Star service agency, transportation prepaid. > Star will not assume any responsibility for loss of revenue. > On all shipments outside the United States and Canada, see International Warranty. * The warranty period for the Ultra-Max, Hot Plates, Griddles, Charbroilers is () years parts & labor. * The warranty period for the Star-Max, Charbroilers, Griddles, Hot Plates, Fryers & Finishing Oven is () years parts & labor. * The warranty period for the JetStar six () ounce & Super JetStar eight (8) ounce series popcorn machines is two () years. * The warranty period for the Chrome-Max Griddles is five (5) years on the griddle surface. See detailed warranty provided with unit. * The warranty period for Dura-Tec coatings is one year under normal use and reasonable care. This warranty does not apply if damage occurs to Dura-Tec coatings from improper cleaning, maintenance, use of metallic utensils, or abrasive cleaners, abrasive pads, product identifiers and point-of-sale attachments, or any other non-food object tha comes in continuous contact with the roller coating. This warranty does not apply to the non-stick properties of such materials. > This warranty does not apply to "Special Products" but to regular catalog items only. Star's warranty on "Special Products" is six () months on parts and ninety (0) days on labor. > This warranty does not apply to any item that is disassembled or tampered with for any purpose other than repair by a Star Authorized Service Center or the Service Center's sub-agency. > This warranty does not apply if damage occurs from improper installation, misuse, wrong voltage, wrong gas or operated contrary to the Installation and Operating instructions. > This warranty is not valid on Conveyor Ovens unless a "start-up/check-out" has been performed by a Factory Authorized Technician. PARTS WARRANT Parts that are sold to repair out of warranty equipment are warranted for ninety (0) days. The part only is warranted, the labor to replace the part is NOT warranted. SERVICES NOT COVERED B WARRANT. Travel time and mileage rendered beyond the 50 mile radius limit. Mileage and travel time on portable equipment (see below). Labor to replace such items that can be replaced easily during a daily cleaning routine, ie; removable kettles on fryers, knobs, grease drawers on griddles, etc.. Installation of equipment 5. Damages due to improper installation. Damages from abuse or misuse 7. Operated contrary to the Operating and Installation Instructions 8. Cleaning of equipment. Seasoning of griddle plates installation OR created by acts of God PORTABLE EQUIPMENT Star will not honor service bills that include travel time and mileage charges for servicing any products considered "Portable" including items listed below. These products should be taken to the Service Agency for repair: * The Model 50FD, 50FF Fryer. * The Model 5TOA Toaster Oven. * The Model JR, oz. Popcorn Machine. * The Model 58CMA & 5CMA Cheese Melter. * The Model MC & 5MC & 8MCP Hot Food Merchandisers. * The Model NCPW & 5NCPW Nacho Chip/Popcorn Warmer. * All Hot Dog Equipment except Roller Grills & Drawer Bun Warmers. * All Nacho Cheese Warmers except Model WLA Series Nacho Cheese Warmer. * All Condiment Dispensers except the Model HPD & SPD Series Dispenser. * All Specialty Food Warmers except Model 0R, RW Series, and WSA Series. * All QCS/RCS Series Toasters except Model QCS & RCS Series. * All Fast Steamer Models except Direct Connect Series. 0. Voltage conversions. Gas conversions. Pilot light adjustment. Miscellaneous adjustments. Thermostat calibration and by-pass adjustment 5. Resetting of circuit breakers or safety controls or reset buttons. Replacement of bulbs 7. Replacement of fuses 8. Repair of damage created during transit, delivery, & ALL: * Pop-Up Toasters * Butter Dispensers * Pretzel Merchandisers (Model PD-A Only) * Pastry Display Cabinets * Nacho Chip Merchandisers * Accessories of any kind * Sneeze Guards * Pizza Ovens (Model PO Only) * Heat Lamps * Pumps-Manual M-Z, Ultra-Max Electric Griddle The foregoing warranty is in lieu of any and all other warranties expressed or implied and constitutes the entire warranty. FOR ASSISTANCE Should you need any assistance regarding the Operation or Maintenance of any Star equipment; write, phone, fax or email our Service Department. In all correspondence mention the Model number and the Serial number of your unit, and the voltage or type of gas you are using. M-7- //
SINGLE PHASE NOMINAL AMPS PER LINE PH. 08V 0V 08V- PHASE 0V-PHASE 8.7 KW 8.7 KW 8.7 KW 8.7 KW - - Z Z.8. 0.. 0. 8.. 8. AWG # AWG #8 AWG AWG AWG AWG AWG AWG # #8 # # #8 # FOR SUPPL CONNECTIONS USE COPPER WIRE ONL, SUITABLE FOR AT LEAST 0 C ( F). USE GAUGE SHOWN OR LARGER. HEATING ELEMENT NOTE: Wattage is.5 kw per heated zone. See unit nameplate on front panel for correct supply voltage. GROUND WIRE,, SINGLE PHASE FIELD WIRING THERMOSTAT PILOT LIGHT M-Z85 TO CONVERT TO PHASE MOVE WIRE # TO THE RD OPEN TERMINAL CONNECTOR Z SHOWN. MODEL 7T AND 70T (SIDE), GROUND WIRE Z PHASE FIELD WIRING SINGLE PHASE SUPPL NOMINAL AMPS PER LINE PH. 08V 0V 08V- PHASE 0V-PHASE.05 KW.05 KW.05 KW.05 KW - - Z Z.7 5....... AWG # AWG # AWG #8 AWG #8,,5,, GROUND WIRE SINGLE PHASE FIELD WIRING M-Z, Ultra-Max Electric Griddle M-Z8 M-Z87 5 THERMOSTAT SINGLE PHASE NOMINAL AMPS PER LINE PH. 08V 0V 08V- PHASE 0V- PHASE 7. KW 7. KW 7. KW 7. KW - - Z Z 8. 7.5 55. 55.. 8 8. AWG # AWG # AWG AWG AWG AWG AWG AWG # # #8 # # #8 8 7 5,,,5 GROUND CONNECTOR GROUND WIRE HEATING ELEMENT Z PILOT LIGHT PHASE FIELD WIRING PHASE FIELD WIRING GROUND WIRE,,5,7,,,8 TO CONVERT TO PHASE MOVE WIRES # AND #5 TO THE RD OPEN TERMINAL CONNECTOR Z SHOWN. NOTE: ) FOR SUPPL CONNECTIONS USE COPPER WIRE ONL, SUITABLE FOR AT LEAST 0 C ( F). USE GAUGE SHOWN OR LARGER. MODEL 7T, 70T ( SIDE), 77T (BOTH SIDES EACH) MODEL 78T FOR SUPPL CONNECTION USE COPPER WIRE ONL, SUITABLE FOR AT LEAST 0 C ( F). USE GAUGE SHOWN OR LARGER. HEATING ELEMENT THERMOSTAT PILOT LIGHT TO CONVERT TO PHASE MOVE WIRES # AND # TO THE RD OPEN TERMINAL CONNECTOR Z SHOWN. GROUND CONNECTOR,5,7 GROUND WIRE,,8 PHASE FIELD WIRING Z, 7
FOR SUPPL CONNECTIONS USE COPPER WIRE ONL, SUITABLE FOR AT LEAST 0 C ( F). USE #0 AWG OR LARGER. DO NOT CONNECT TO A SSTEM OPERATING AT MORE THAN 50 VOLTS TO GROUND HEATING ELEMENT PILOT LIGHT 0/00 VOLT - 8.7 KW NOM. AMPS Z PER LINE.8.8.8 NOTE: Wattage is.5 kw per heated zone. (50 watts per-element) See unit nameplate for correct supply voltage. 5 5 CONTACTOR 5 7 N G G THERMOSTAT N M-Z8 REV A -0-07 Z MODEL 7T 0V PHASE FOR SUPPL CONNECTIONS USE COPPER WIRE ONL, SUITABLE FOR AT LEAST 0 C ( F). USE # AWG OR LARGER. DO NOT CONNECT TO A SSTEM OPERATING AT MORE THAN 50 VOLTS TO GROUND 0/00 VOLT -.05 KW NOM. AMPS Z PER LINE.7.7.7 HEATING ELEMENT PILOT LIGHT CONTACTOR M-Z855 REV A -0-07 5 8 7 5 7 5 7 THERMOSTAT FOR SUPPL CONNECTIONS USE COPPER WIRE ONL, SUITABLE FOR AT LEAST 0 C ( F). USE #8 AWG OR LARGER. DO NOT CONNECT TO A SSTEM OPERATING AT MORE THAN 50 VOLTS TO GROUND HEATING ELEMENT CONTACTOR M-Z850 REV B 7-5-08 5 0 5 5 5 MODEL 7T 0V PHASE 8 7 7 7 5 7 THERMOSTAT G N G N Z NOM. AMPS PER LINE MODEL 78T 0V PHASE 0/00 VOLT - 7. KW Z 5. 5. 5. 5 G N G N Z PILOT LIGHT M-Z, Ultra-Max Electric Griddle 8
FOR SUPPL CONNECTIONS USE COPPER WIRE ONL, SUITABLE FOR AT LEAST 0 C ( F). USE #8 AWG OR LARGER. DO NOT CONNECT TO A SSTEM OPERATING AT MORE THAN 50 VOLTS TO GROUND 70T 0/00 VOLT -.75 KW NOM. AMPS Z PER LINE.5.5.5 A C B 8 5 7 D 7 5 0 5 5 8 7 7 7 7 5 G N G LEGEND A HEATING ELEMENT B CONTACTOR C PILOT LIGHT D THERMOSTAT E 5 E N Z M-Z77 MODEL 70T 0/00V PHASE M-Z, Ultra-Max Electric Griddle
5 8 NAMEPLATE 7 8 5 7 0 0 5 7 8 M-Z, Ultra-Max Electric Griddle SOME ITEMS ARE INCLUDED FOR ILLUSTRATIVE PURPOSES ONL AND IN CERTAIN INSTANCES MA NOT BE AVAILABLE MODEL 7TA, 7TA, 78TA, 70TA, 77TA STAR MANUFACTURING INTERNATIONAL, INC. SK REV A. 8/0/0 0
PARTS LIST November, 0, Rev. A M-Z, Ultra-Max Electric Griddle Model: 7TA ULTRA-MA ELECTRIC GRIDDLE Fig No. Part No. Description Qty Application G5-80 GRIDDLE PLATE ASS 7 7TA G5-805 GRIDDLE PLATE ASS 7CHS 7TCHSA E-Z85 / PLASTIC END BUSHING E-Z8 / x / EMT TUBE E-Z858 / EMT CONNECTOR 5 G5-Z8 REAR PANEL G5-Z0 ELECTRICAL BO COVER 0V G5-Z88 JUNCTION BO COVER 7 E-Z88 08/0V E-Z55 5 POS # 0V 8 E-Z8 TERMINAL LUG - AL-CU 08/0V G5-80 JUNCTION BO ASS 08/0V G5-Z08 ELECTRICAL BO 0V 0 G5-80 BOD ASS N-Z88 HEATING ELEMENT 50W 08V 08V N-Z885 HEATING ELEMENT 50W 0V 0V N-Z887 HEATING ELEMENT 50W 0V G5-Z88 HEATER ELEMENT CLAMPS G5-Z888 HEATER ELEMENT SHIELD 5 C-57 NUT /-0 HE STL NP G5-Z88 BOTTOM PANEL 7 G5-Z855 DRAWER SLIDE 8 G5-80 GREASE DRAWER ASS A-Z FOOT, FLANGED NON-SKID R-Z FOOT, TAPERED STEEL 0 M-Z00 GRAPHIC, DIAL 50F CW G-0 KNOB ASSEMBL LG E-F KE M-Z5805 LOGO, ULTRA-MA J-0 PILOT LIGHT 0V G5-Z08 FRONT PANEL - 7TA 5 C-877 CLIP.5 PO STL PHOS T-Z558 THERMOSTAT 7 P-Z878 HINGE,.5 U-MA 8 E-078 CONTACTOR 50A PH 08 7TA-0V G5-80 CHUTE ASSEMBL NI M-Z85 WIRING DIAGRAM LABEL 7TA NI M-Z8 WIRING DIAGRAM LABEL CE 7TA-0V, 7TCHSA-0V IMPORTANT: WHEN ORDERING, SPECIF VOLTAGE OR TPE GAS DESIRED PAGE INCLUDE MODEL AND SERIAL NUMBER OF Some items are included for illustrative purposes only and in certain instances may not be available. Star Manufacturing International, Inc.
PARTS LIST November, 0, Rev. A Model: 7TA ULTRA-MA ELECTRIC GRIDDLE Fig No. Part No. Description Qty Application G5-80 GRIDDLE PLATE ASS 7 7TA G5-805 GRIDDLE PLATE ASS 7CHS 7TCHSA E-Z85 / PLASTIC END BUSHING E-Z8 / x / EMT TUBE E-Z858 / EMT CONNECTOR 5 G5-Z8 REAR PANEL G5-Z0 ELECTRICAL BO COVER 0V G5-Z88 JUNCTION BO COVER 7 E-Z88 08/0V E-Z55 5 POS # 0V 8 E-Z8 TERMINAL LUG - AL-CU 08/0V G5-80 JUNCTION BO ASS G5-Z08 ELECTRICAL BO 0V 0 G5-80 BOD ASS N-Z88 HEATING ELEMENT 50W 08 08V N-Z885 HEATING ELEMENT 50W 0 0V N-Z887 HEATING ELEMENT 50W 0 0V G5-Z88 HEATER ELEMENT CLAMPS 8 G5-Z888 HEATER ELEMENT SHIELD 5 C-57 NUT /-0 HE STL NP G5-Z88 BOTTOM PANEL G5-Z8 BOTTOM PANEL 7 G5-Z855 DRAWER SLIDE 8 G5-80 GREASE DRAWER ASS A-Z FOOT- IN D. IN L. R-Z FOOT, TAPERED STEEL 0 M-Z00 GRAPHIC, DIAL 50F CW G-0 KNOB ASSEMBL LG E-F KET M-Z5805 LOGO, ULTRA-MA J-0 PILOT LIGHT 0V G5-Z5 FRONT PANEL - 7TA 5 C-877 CLIP.5 PO STL PHOS T-Z558 THERMOSTAT 7 P-Z878 HINGE,.5 U-MA 8 E-078 CONTACTOR 50A PH 08V 0V G5-80 CHUTE ASSEMBL NI M-Z8 WIRING DIAGRAM LABEL NI M-Z855 WIRING DIAGRAM LABEL CE 7TA-0V, 7TCHSA-0V M-Z, Ultra-Max Electric Griddle IMPORTANT: WHEN ORDERING, SPECIF VOLTAGE OR TPE GAS DESIRED PAGE INCLUDE MODEL AND SERIAL NUMBER OF Some items are included for illustrative purposes only and in certain instances may not be available. Star Manufacturing International, Inc.
M-Z, Ultra-Max Electric Griddle PARTS LIST November, 0, Rev. A Model: 78TA ULTRA-MA ELECTRIC GRIDDLE Fig No. Part No. Description Qty Application G5-880 GRIDDLE PLATE ASS 78 78TA G5-8805 GRIDDLE PLATE ASS 78CHS 78TCHSA E-Z85 / PLASTIC END BUSHING E-Z8 / x / EMT TUBE E-Z858 / EMT CONNECTOR 5 G5-Z8 REAR PANEL 8 G5-Z88 JUNCTION BO COVER 08/0V G5-Z0 ELECTRICAL BO COVER 0V 7 E-Z88 08/0V E-Z55 5 POS # 0V 8 E-Z8 TERMINAL LUG - AL-CU 08/0V G5-80 JUNCTION BO ASS 08/0V G5-Z08 ELECTRICAL BO 0V 0 G5-880 BOD ASS 8 N-Z88 HEATING ELEMENT 50W 08 08V N-Z885 HEATING ELEMENT 50W 0V 0V N-Z887 HEATING ELEMENT 50W 0V 0V G5-Z88 HEATER ELEMENT CLAMPS G5-Z888 HEATER ELEMENT SHIELD 5 C-57 NUT /-0 HE STL NP 8 G5-Z88 BOTTOM PANEL G5-Z870 BOTTOM PANEL 8 7 G5-Z855 DRAWER SLIDE 8 G5-80 GREASE DRAWER ASS A-Z FOOT- IN D. IN L. R-Z FOOT, TAPERED STEEL 0 M-Z00 GRAPHIC, DIAL 50F CW G-0 KNOB ASSEMBL LG E-F KET M-Z5805 LOGO, ULTRA-MA J-0 PILOT LIGHT 0V G5-Z0 FRONT PANEL - 78TA 5 C-877 CLIP.5 PO STL PHOS T-Z558 THERMOSTAT 7 P-Z878 HINGE,.5 U-MA 8 E-078 CONTACTOR 50A PHASE 08 G5-80 CHUTE ASSEMBL NI M-Z87 WIRING DIAGRAM LABEL 8 08/0V NI M-Z850 WIRING DIAGRAM LABLE 8CE 0V IMPORTANT: WHEN ORDERING, SPECIF VOLTAGE OR TPE GAS DESIRED PAGE INCLUDE MODEL AND SERIAL NUMBER OF Some items are included for illustrative purposes only and in certain instances may not be available. Star Manufacturing International, Inc.
PARTS LIST Model: 70TA ULTRA-MA ELECTRIC GRIDDLE November, 0, Rev. A Fig No. Part No. Description Qty Application G5-800 GRIDDLE PLATE ASS 70 70TA G5-8005 GRIDDLE PLATE ASS 70CHS 70TCHSA 08/0V E-Z858 / EMT CONNECTOR 0V 08/0V E-Z8 / x / EMT TUBE 0V 08/0V E-Z85 / PLASTIC END BUSHING 0V 5 G5-Z8 REAR PANEL 0 70TA-08V 7 8 E-Z8 TERMINAL LUG - AL-CU 08/0V G5-800 BOD ASS 70T 0V 0V 0 G5-800 BOD ASS 0 08/0V N-Z88 HEATING ELEMENT 50W 08 08V 5 N-Z885 HEATING ELEMENT 50W 0 0V N-Z887 HEATING ELEMENT 50W 0 5 0V G5-Z88 HEATER ELEMENT CLAMPS 0 G5-Z888 HEATER ELEMENT SHIELD 5 5 C-57 NUT /-0 HE STL NP 0 7 G5-Z855 DRAWER SLIDE 8 G5-80 GREASE DRAWER ASS 0 M-Z00 GRAPHIC, DIAL 50F CW 5 G-0 KNOB ASSEMBL LG E-F KET 5 M-Z5805 LOGO, ULTRA-MA J-0 PILOT LIGHT 0V 5 G5-Z0 FRONT PANEL - 70TA 5 C-877 CLIP.5 PO STL PHOS T-Z558 THERMOSTAT 5 7 P-Z878 HINGE,.5 U-MA 8 E-078 CONTACTOR 50A PH 08 5 G5-80 CHUTE ASSEMBL NI M-Z77 LABEL-WIRE DIAGRAM 0V NI M-Z85 WIRING DIAGRAM LABEL 08/0V G5-Z0 E-Z88 G5-80 G5-Z88 A-Z ELECTRICAL BO COVER JUNCTION BO ASS BOTTOM PANEL FOOT- IN D. IN L. 0V 08/0V 08/0V G5-Z88 E-Z55 G5-Z08 G5-Z87 R-Z JUNCTION BO COVER 5 POS # ELECTRICAL BO BOTTOM PANEL 0 FOOT, TAPERED STEEL 08/0V 0V 0V M-Z, Ultra-Max Electric Griddle IMPORTANT: WHEN ORDERING, SPECIF VOLTAGE OR TPE GAS DESIRED PAGE INCLUDE MODEL AND SERIAL NUMBER OF Some items are included for illustrative purposes only and in certain instances may not be available. Star Manufacturing International, Inc.
PARTS LIST November, 0, Rev. A M-Z, Ultra-Max Electric Griddle Model: 77TA ULTRA-MA ELECTRIC GRIDDLE Fig No. Part No. Description Qty Application G5-870 GRIDDLE PLATE ASS 77 77T G5-8705 GRIDDLE PLATE ASS 77CHS 77TCHSA E-Z85 / PLASTIC END BUSHING E-Z8 / x / EMT TUBE E-Z858 / EMT CONNECTOR 5 G5-Z85 REAR PANEL 7 G5-Z88 JUNCTION BO COVER 7 E-Z88 8 E-Z8 TERMINAL LUG - AL-CU G5-80 JUNCTION BO ASS 0 G5-870 BOD ASS 7 N-Z88 HEATING ELEMENT 50W 08 08V N-Z885 HEATING ELEMENT 50W 0 0V G5-Z88 HEATER ELEMENT CLAMPS G5-Z888 HEATER ELEMENT SHIELD 5 C-57 NUT /-0 HE STL NP 0 G5-Z88 BOTTOM PANEL G5-Z87 BOTTOM PANEL 7 7 G5-Z855 DRAWER SLIDE 8 G5-80 GREASE DRAWER ASS A-Z FOOT- IN D. IN L. R-Z FOOT, TAPERED STEEL 0 M-Z00 GRAPHIC, DIAL 50F CW G-0 KNOB ASSEMBL LG E-F KET M-Z5805 LOGO, ULTRA-MA J-0 PILOT LIGHT 0V G5-Z FRONT PANEL - 77TA 5 C-877 CLIP.5 PO STL PHOS T-Z558 THERMOSTAT 7 P-Z878 HINGE,.5 U-MA G5-80 CHUTE ASSEMBL NI M-Z8 WIRING DIAGRAM LABEL IMPORTANT: WHEN ORDERING, SPECIF VOLTAGE OR TPE GAS DESIRED PAGE INCLUDE MODEL AND SERIAL NUMBER OF Some items are included for illustrative purposes only and in certain instances may not be available. 5 Star Manufacturing International, Inc.
STAR INTERNATIONAL HOLDINGS INC. COMPAN Star - Holman - Lang - Wells - Bloomfield - Toastmaster 0 Sunnen Drive, St. Louis, MO U.S.A. () 78-0 www.star-mfg.com