GETINGE CLEAN SINK DOSING (CSD) PRODUCT SPECIFICATION PRODUCT Getinge (CSD) is a multi-use, easy to operate detergent dosing system for better process control of manual sink cleaning applications. The CSD can also be used to dispense detergent to ultrasonic baths. Getinge CSD unit is easy to install, and depending on local regulations it is typically fitted on the wall behind the sink. The Getinge CSD includes; Base unit With two peristaltic pumps prepared for single or dual pump modes, it can be used for up to two different detergents and two sinks, or other units that need precise dosing of process chemicals. If the single pump mode is used, the second pump serves as a back-up. Temperature probe Ensures optimal cleaning temperatures and helps prevent hot water scalding. The display will signal when temperature is out of range (adjustable). Installation kit All necessary parts for a complete installation of the Getinge CSD; see page 3. Advanced control interface Includes interface for optional remote start switch and low level detergent alarm. INTENDED USE The Getinge is used to deliver Getinge Clean process chemicals into a pre-cleaning sink for soaking and manual cleaning of various items*. Getinge uses a computer controlled peristaltic pump to deliver the exact amount process chemicals, at the optimal temperature and dilution rate according to the recommendations of the manufacturer. *For cleaning of surgical instruments, always follow the recommendation from the instrument manufacturer in accordance to ISO 17664:2004 Two reliable peristaltic pumps for dosing into two different basins (sink or sonic) or dosing of two different detergents with a single system Capable of dosing two programmable levels (half and full sink) at the unit or with a single button actuation at the remote switch (optional) Temperature probe ensures dosing of detergent at the right temperature for maximum cleaning efficiency Temperature continuously monitored and shown on the LED display Intuitive user interface and digital programming menu in: English, Spanish, French, German and Swedish. Informative panel with backlight LED for status indication Adapted transformer for easy installation Compatible with most detergent containers Optional low-level alarm for detergent container- alarm indication in LED display Optional remote switch or foot pedal for remote operation <Doc_SUB><Doc_PS07-0094_PRODSPEC_CSD><Rel_A><Lang_EN>
INTUITIVE USER INTERFACE WITH BACKLIGHT COLOR LED FOR INDICATION OF STATUS = OK = Dispensing mode = Alarm mode STANDARDS AND CODES CE-marked according to the Low Voltage Directive (LVD) 2006/95/EC Standards: IEC 61010-1(2nd edition) Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use, Part 1: General EN 61326 Electrical Equipment Measurement, Control & Laboratory Use UL 61010-1 and CAN/CSA-C22.2No 61010-1-04 DOCUMENTATION Getinge CSD is supplied with a multi-language documentation in: English, Spanish, French, German and Swedish Quick guide Installation, user, technical and parts manual TECHNICAL DATA Power supply Transformer (included): Input: 100 240VAC, 50/60Hz, 30W Output: 24VDC, 1.25A Max flow rate pump: 100 ml/min Dispensed accuracy: +/- 10% (Volume > 10ml) Maximum pump suction: 6 meters (20ft) Maximum pump discharge: 45 meters (147ft) Remote switch dual Potential free contacts (2 N/O), incl. 5m (16ft) cable Signal inputs: 2 Low detergent level input (2 N/C) 1 Temperature input (NTC), 2.8m (9ft) long 2 x Remote start inputs (used with the dual remote control) Dimensions base unit 175 145 210 mm, (7 6 9 in.) W D H Dimensions remote switch 65 25 105 mm, (2.5 1 4 in.) W D H Weight: 3.6 Kg (8 lbs.) Degree of protection, enclosure IP55 Ambient Operating Range: 10 to 50 deg. C (50 to 122 F) Storage Temperature Range: -20 to 70 deg. C (-4 to 158 F) Ambient Humidity Range (operating) 10% to 90% Enclosure material: ABS (case) / Polycarbonate (cover) Overlay material: Polycarbonate Suction cup material: PVC Transport tube Material: PVC Squeeze tube material (pump) Norprene <Doc_SUB><Doc_PS07-0094_PRODSPEC_GETINGE CSD><Rel_A><Lang_EN>
ORDERING INFORMATION GETINGE CLEAN SINK DOSING, Part number: 504341600 Incl.: Control unit with multi adapter kit for the transformer, 1 x temperature probe, wall-mounted bracket, screws and installation kits for two pumps. 1 2 Installation kit for two pumps (included) 2 x Suction Cup, 1\ OD PVC 2 x Check Valve, 1/2 PSI Cracking Pressure, 1/4 x 1/4 Barb, Viton 20 x Cable Ties 3.5 8 x Cable Tie Mounts 5 x Clamp, PVC,.406 2 x Fitting, Black-1/4 Barb X 1/4 Barb 2 x Ceramic Tube Weight 2 x Bottom Check Valve with Debris Filter Foot, EPDM 2 x Tube, T-38V PVC 1/4Id X 3/8Od X 4.5m (15Ft.) (cut to fit) OPTIONAL ACCESSORIES Remote switch dual, Part number: 6001073701 Dual remote switch for convenient positioning and ergonomic activation of the system. Easy configuration to control dual dosing volumes (A + B) or dual pumps (1+2) Note! The remote is needed when using the 2nd pump in dual pump mode operation incl. 5m (16 feet) cable. Dimensions: 65 x 25 x 105 mm, (2.5x1x4 in.) W x D x H Low level alarm, Part number: 6001073801 Suction wand with built in low level alarm. Display turns red when low level is reached in the detergent container. Y-splitter barb adapter is included if one container will feed both pumps. If two different detergents are to be used; two low level alarms are required, incl. 3 m (10 feet) hose and cable Foot pedal, Part number: 6001073901 For ergonomic and easy start of the dispense cycle. Up to two foot pedals can be used for the CSD unit. If two pump or volumes shall be activated, two foot pedals are required. Degree of protection IP65, incl. 2m cable Dimensions: 72 x 28 x 96 mm, (2.8x1.1x3.8 in.) W x D x H <Doc_SUB><Doc_PS07-0094_PRODSPEC_CSD><Rel_A><Lang_EN>
EXAMPLE OF INSTALLATIONS WITH GETINGE CLEAN SINK DOSING 1 Detergent, 1 sink 1 Detergent, 2 sinks 2 different detergents, 1 sink 2 different detergents, 2 sinks Note! 1) One of the sinks in the configurations could also be e.g ultrasonic baths etc. Note! 2) The Getinge system (CSD) can be included and supplied from the Getinge Clean Management System (CMS). <Doc_SUB><Doc_PS07-0094_PRODSPEC_GETINGE CSD><Rel_A><Lang_EN>
<Doc_SUB><Doc_PS07-0094_PRODSPEC_CSD><Rel_A><Lang_EN>
Getinge Australia Pty Ltd PO Box 50 Bulimba QLD 4171 Australia E-mail: info@getinge.com.au Cust Support: 1300 155 500 Phone: +61 7 3399 3311 Fax: +61 7 3395 6712 Belgium Getinge NV Vosveld 4 B-2 B-2110 Wijnegem info@getinge.be Phone: +32-33 542 865 Canada Getinge Canada Ltd 6685, Millcreek Drive Unit 3 Mississauga, Ontario L5N5M5 Canada customercare@getinge.ca Phone: 905-363-4150 China Getinge (Suzhou) Co.Ltd No.158,Fang Zhou Road, Suzhou Industrial Park 15021 Suzhou, Jiangsu Province P.R.China info@getinge.com.cn Phone: +86-51 262 838 966 Getinge Shanghai Trading Co. Ltd. Rm 1988 Tower B, CityCentr, 100 Zunyi Rd. 200051 Shanghai P.R. info@getinge.com.cn Phone: +86-21 623 72 408 Denmark Getinge Danmark A/S Industriparken 44 B DK-2750 Ballerup Phone +45 45 93 27 27 Fax +45 45 93 41 20 Finland Getinge Finland AB Ängsgatan 8 FI-02200 Esbo getinge@getinge.fi Phone: +35-89 6824 120 France Getinge France SAS BP 49, avenue du Canada ZA de Courtaboeuf Les Ulis, FR-91942 getinge.france@getinge.fr Phone: +33-1 64 86 89 00 Germany Getinge Vertrieb & Service GmbH Kehler Strasse 31 764 37 RASTATT Germany Tel: +49-7222 932 306 Fax: +49-7222 932 597 e-mail: info.inco-de@getinge.com Italy Getinge S.p.A via Poggio Verde, 34 00148 Roma info@getinge.it Phone: +39-06 656 631 Japan Toshin Takanawa Build. 9F, 3-11-3 Takanawa Minato-Ku Tokyo JP-108-0074 Phone: +81 3 5791 7560 Netherlands Getinge B.V. Fruiteniersstraat 27, Zwijndrecht Postbus 1004 NL-3330 CA Zwijndrecht info@getinge.nl Phone: +31-78 610 24 33 Norway Getinge Norge A/S Strandveien 13 1366 Lysaker Norway info@getinge.no Phone: +47-23 03 52 00 Poland Getinge Poland Ul. Lirowa 27 02-387 Warszawa office@getinge.pl Phone: +48-22 882 06 26 Singapore Getinge International Far East Pte. Ltd. 20 Bendemeer Road, #06-02, Cyberhub Building Singapore, SG-339914 Phone: + 65-6396 7298 South Africa Getinge South Africa (Pty) Ltd P O Box 48492 Hercules Pretoria SA 0002 getinge@mweb.co.za Phone: +27-123 721 370 Spain Getinge Iberica SL C/ Marie Curie, 5 Edificio Alfa, Planta 6ª 28521 Rivas Vaciamadrid SPAIN administracion@getinge.es Phone: + 34-916 78 26 26 Sweden Getinge Sverige AB P O Box 69 SE-310 44 Getinge info@getinge.com Phone: +46-10 335 00 00 Switzerland Getinge ALFA AG Weidenweg 17 4310 Rheinfelden info@alfa.ag www.getingealfa.ch Phone: +41-61 836 15 15 United Kingdom Getinge UK Ltd Orchard Way Calladine Park Sutton-In-Ashfield Notts NG 17 1JU sales@getinge.co.uk Phone: +44-1623510033 USA Getinge USA Inc. 1777 East Henrietta Road Rochester, NY 14623-3133 info@getingeusa.com www.getingeusa.com Phone: +1-5,854,751,400 www.getinge.com