PHOTOVOLTAIC DEVICES -- PART 2:

Similar documents
ELECTRICAL AND INSTRUMENTATION LOOP CHECK (IEC 62382:2006 (EQV)) IRISH STANDARD I.S. EN 62382:2007. Price Code

CONVENTIONS CONCERNING ELECTRIC AND MAGNETIC CIRCUITS (IEC 60375:2003) IRISH STANDARD I.S. EN 60375:2003. Price Code

SECONDARY CELLS AND BATTERIES

RAILWAY APPLICATIONS - ELECTROTECHNICAL EQUIPMENT FOR ROLLING STOCK PART 5: ELECTROTECHNICAL COMPONENTS RULES FOR HV FUSES (IEC :2003)

HEXALOBULAR INTERNAL DRIVING FEATURE FOR BOLTS AND SCREWS (ISO 10664:2005) IRISH STANDARD I.S. EN ISO 10664:2005. Price Code

OVERHEAD ELECTRICAL LINES EXCEEDING

PAPER - DETERMINATION OF BURSTING STRENGTH (ISO 2758:2001) IRISH STANDARD I.S. EN ISO 2758:2003. Price Code

LABORATORY GLASSWARE - GRADUATED MEASURING CYLINDERS (ISO 4788:2005) IRISH STANDARD I.S. EN ISO 4788:2005. Price Code

BIOLOGICAL EVALUATION OF MEDICAL

ALARM SYSTEMS - INTRUSION AND

CLEAR LIQUIDS - ESTIMATION OF COLOUR BY THE GARDNER COLOUR SCALE - PART 1: VISUAL METHOD (ISO :2004) IRISH STANDARD I.S. EN ISO :2005

CONFORMITY ASSESSMENT - SUPPLIER'S

HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY PART 2-13: PARTICULAR REQUIREMENTS FOR DEEP FAT FRYERS, FRYING PANS AND SIMILAR

COMMUNICATION SYSTEMS FOR AND REMOTE READING OF METERS - PART 2: PHYSICAL AND LINK LAYER IRISH STANDARD I.S. EN :

REFRIGERATING SYSTEMS AND HEAT

HIGH -VOLTAGE SWITCHGEAR AND

High-voltage switchgear and controlgear -- Part 203: Gas-insulated metal-enclosed switchgear for rated voltages above 52 kv (IEC :2011 (EQV))

ALARM SYSTEMS - INTRUSION AND

PACKAGING - REQUIREMENTS FOR PACKAGING RECOVERABLE BY MATERIAL RECYCLING STANDARD I.S. EN 13430:2004. Price Code

DECORATIVE WALLCOVERINGS - ROLL AND PANEL FORM PRODUCTS IRISH STANDARD I.S. EN 15102:2007. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann

Office furniture - Office work chair - Part 2: Safety requirements

PLASTICS - DETERMINATION OF THE MELT

STEEL TUBES AND FITTINGS FOR ON SHORE AND OFFSHORE PIPELINES - INTERNAL LINING WITH CEMENT MORTAR IRISH STANDARD I.S. EN 10298:2005.

NATURAL GAS - CALCULATION OF

HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY PART 2-95: PARTICULAR REQUIREMENTS FOR DRIVES FOR VERTICALLY MOVING GARAGE DOORS

CROSS RECESSED RAISED COUNTERSUNK HEAD DRILLING SCREWS WITH TAPPING SCREW THREAD (ISO 15483:1999) IRISH STANDARD I.S. EN ISO 15483:2000.

WATER QUALITY - CRITERIA FOR

PISTON-OPERATED VOLUMETRIC

NATURAL STONE PRODUCTS - MODULAR TILES - REQUIREMENTS IRISH STANDARD I.S. EN 12057:2004. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann

Operation of electrical installations -- Part 1: General requirements

Founding - Magnetic particle testing

EXECUTION OF SPECIAL GEOTECHNICAL WORKS - MICROPILES IRISH STANDARD I.S. EN 14199:2005. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann 93.

CLEANROOMS AND ASSOCIATED

REFRIGERATING SYSTEMS AND HEAT

This document is a preview generated by EVS

STEELS MICROGRAPHIC DETERMINATION THE APPARENT GRAIN SIZE (ISO 643:2003) IRISH STANDARD I.S. EN ISO 643:2003. Price Code

PETROLEUM AND NATURAL GAS

Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO :2011)

SOLID BIOFUELS - METHODS FOR

Cylindrical helical springs made from round wire and bar - Calculation and design - Part 1 : Compression springs

Irish Standard I.S. EN :2009

Foodstuffs - Determination of vitamin C by HPLC

ILNAS-EN 61649:2008. Weibull analysis. Analyse de Weibull. Weibull-Analyse

ILNAS-EN ISO 23640:2015

Medical gloves for single use - Part 2: Requirements and testing for physical properties

Paper and board - Determination of grammage (ISO 536:2012)

PACKAGING MATERIALS AND SYSTEMS FOR MEDICAL DEVICES WHICH ARE TO BE STERILIZED - PART 10: ADHESIVE COATED NONWOVEN MATERIALS OF POLYOLEFINES

COPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN :1999

ILNAS-EN 62560:2012/A1:2015

Sýnishorn Power installations exceeding 1 kv a.c. - Part 1: Common rules

This document is a preview generated by EVS

This document is a preview generated by EVS

Railway applications - Communication, signalling and processing systems - Safety-related communication in transmission systems

Bitumen and bituminous binders - Specifications for paving grade bitumens

This document is a preview generated by EVS

Resilient, textile and laminate floor coverings - Classification (ISO 10874:2009)

Bitumen and bituminous binders - Determination of the paraffin wax content - Part 1: Method by distillation

This document is a preview generated by EVS

Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012)

This document is a preview generated by EVS

SOUTH AFRICAN NATIONAL STANDARD

This document is a preview generated by EVS

LOAD RESTRAINT ASSEMBLIES ON ROAD VEHICLES - SAFETY - PART 2: WEB LASHING MADE FROM MAN-MADE FIBRES IRISH STANDARD I.S. EN :

Camping tents (ISO 5912:2011)

Metallic materials - Calibration of forceproving instruments used for the verification of uniaxial testing machines (ISO 376:2011)

This document is a preview generated by EVS

Sýnishorn Maintenance - Qualification of maintenance personnel

Furniture - Children's cots and folding cots for domestic use - Part 2: Test methods

Quality Management Systems - Audit Requirements for Aviation, Space, and Defence Organizations

Water-tube boilers and auxiliary installations - Part 3: Design and calculation for pressure parts of the boiler

ILNAS-EN ISO :2005

Sýnishorn Respiratory protective devices - Gas filter(s) and combined filter(s) - Requirements, testing, marking

ILNAS-EN 61882:2016. Hazard and operability studies (HAZOP studies) - Application guide

SOUTH AFRICAN NATIONAL STANDARD

This document is a preview generated by EVS

SOUTH AFRICAN NATIONAL STANDARD

ILNAS-EN :2012

ICS Supersedes CLC/TS 62046:2005. English version

This document is a preview generated by EVS

This document is a preview generated by EVS

This document is a preview generated by EVS

STEEL TUBES AND FITTINGS FOR

Paints and varnishes - Corrosion protection by protective paint systems - Assessment of porosity in a dry film (ISO 29601:2011)

Radiological protection - Sealed radioactive sources - General requirements and classification (ISO 2919:2012)

Irish Standard Recommendation S.R. CEN/TS 115-4:2015

Plastic containers for intravenous injections (ISO 15747:2010)

This document is a preview generated by EVS

Irish Standard I.S. EN :2011

Sterilization of health care products - Moist heat - Part 2: Guidance on the application of ISO (ISO :2009)

Energy management systems - Requirements with guidance for use (ISO 50001:2011)

Gas meters - Additional functionalities

This document is a preview generated by EVS

This document is a preview generated by EVS

ILNAS-EN ISO :2017

This document is a preview generated by EVS

Eurocode 2 - Design of concrete structures - Part 3: Liquid retaining and containment structures

This document is a preview generated by EVS

EESTI STANDARD EVS-EN :2003

This document is a preview generated by EVS

This document is a preview generated by EVS

Transcription:

IRISH STANDARD I.S. EN 60904-2:2007 ICS 27.160 PHOTOVOLTAIC DEVICES -- PART 2: REQUIREMENTS FOR REFERENCE SOLAR National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800 Fax: +353 1 807 3838 http://www.nsai.ie Sales http://www.standards.ie DEVICES (IEC 60904-2:2007 (EQV)) NSAI 2007 Údarás um Chaighdeáin Náisiúnta na héireann This Irish Standard was published under the authority of the National Standards Authority of Ireland and comes into effect on: 16 July 2007 NO COPYING WITHOUT NSAI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW Price Code I

EUROPEAN STANDARD EN 60904-2 NORME EUROPÉENNE EUROPÄISCHE NORM June 2007 ICS 27.160 Supersedes EN 60904-2:1993 + A1:1998 and EN 60904-6:1994 + A1:1998 English version Photovoltaic devices - Part 2: Requirements for reference solar devices (IEC 60904-2:2007) Dispositifs photovoltaïques - Partie 2: Exigences relatives aux dispositifs solaires de référence (CEI 60904-2:2007) Photovoltaische Einrichtungen - Teil 2: Anforderungen an Referenz-Solarelemente (IEC 60904-2:2007) This European Standard was approved by CENELEC on 2007-05-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60904-2:2007 E

EN 60904-2:2007-2 - Foreword The text of document 82/425/CDV, future edition 2 of IEC 60904-2, prepared by IEC TC 82, Solar photovoltaic energy systems, was submitted to the IEC-CENELEC parallel Unique Acceptance Procedure and was approved by CENELEC as EN 60904-2 on 2007-05-01. EN 60904-2:2007 supersedes EN 60904-2:1993 + A1:1998 and EN 60904-6:1994 + A1:1998. The main technical changes with regard to EN 60904-2:1993 are as follows: added subclause on Calibration traceability ; added subclause on Construction to differentiate the various types of reference devices; added guidance on use of a built-in shunt resistor; increased data sheet requirements. In particular added requirement for either a mismatch correction or an estimate of uncertainty due to the mismatch of the reference device; added Clause on Calibration of working solar reference devices. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2008-02-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2010-05-01 Annex ZA has been added by CENELEC. Endorsement notice The text of the International Standard IEC 60904-2:2007 was approved by CENELEC as a European Standard without any modification.

- 3 - EN 60904-2:2007 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60891-1) Procedures for temperature and irradiance corrections to measured I-V characteristics of crystalline silicon photovoltaic devices EN 60891 1994 2) IEC 60904-1 - 1) Photovoltaic devices - Part 1: Measurement of photovoltaic currentvoltage characteristics IEC 60904-5 - 1) Photovoltaic devices - Part 5: Determination of the equivalent cell temperature (ECT) of photovoltaic (PV) devices by the open-circuit voltage method IEC 60904-7 - 1) Photovoltaic devices - Part 7: Computation of spectral mismatch error introduced in the testing of a photovoltaic device IEC 60904-8 - 1) Photovoltaic devices - Part 8: Measurement of spectral response of a photovoltaic (PV) device IEC 60904-9 - 1) Photovoltaic devices - Part 9: Solar simulator performance requirements IEC 60904-10 - 1) Photovoltaic devices - Part 10: Methods of linearity measurement IEC 61215-1) Crystalline silicon terrestrial photovoltaic (PV) modules - Design qualification and type approval IEC 61646-1) Thin-film terrestrial photovoltaic (PV) modules - Design qualification and type approval 1) Undated reference. 2) Valid edition at date of issue. EN 60904-1 2006 2) EN 60904-5 1995 2) EN 60904-7 1998 2) EN 60904-8 1998 2) - - EN 60904-10 1998 2) EN 61215 2005 2) EN 61646 1997 2)

NORME INTERNATIONALE INTERNATIONAL STANDARD CEI IEC 60904-2 Deuxième édition Second edition 2007-03 Dispositifs photovoltaïques Partie 2: Exigences relatives aux dispositifs solaires de référence Photovoltaic devices Part 2: Requirements for reference solar devices Numéro de référence Reference number CEI/IEC 60904-2:2007

The remainder of this document is available for purchase online at www.saiglobal.com/shop SAI Global also carries a wide range of publications from a wide variety of Standards Publishers: Click on the logos to search the database online.