RENNER SCREW COMPRESSORS WATER-INJECTED 100% OIL-FREE COMPRESSED AIR Made in Germany Output: 18.5 to 45 kw
RENNER SCREW COMPRESSORS WATER-INJECTED RSW 18.5 45, RSWF 30 45 RENNER The expert in oil-free compressed air! RENNER OIL-FREE, WATER-INJECTED, WATER-COOLED COMPRESSORS. The water-cooled screw compressor models RSW and RSWF were developed for the economical production of oil-free compressed air in the medium output range of 18.5 to 45 kw. Optimal energy balance: Virtually isothermal compression Very high compression efficiency at low operating temperature through water-injection Very low air losses due to water sealing of rotors Energy saving through use of frequency control. A special feature of the utility patent-protected compressors is that the compressor oil used for lubrication, cooling and compression has been totally excluded from the compression process. The most natural of all raw materials has now taken over this task: water. As the ideal heat carrier, it draws the compression heat from the compressor and permanently supplies the water-injected friction bearings. PLUS POINTS AT A GLANCE: Completely oil-free and environmentally friendly: Not one drop of oil in the entire compressor No danger of oil leaking and entering the compressed air No production of hazardous waste such as waste oil, oil filters or oil-drenched activated carbon, no environmental pollution No oil change required. Low maintenance costs: High wear resistance of components due to low operating temperatures Excellent access to all maintenance and wear components resulting in lower servicing costs No disposal costs for used oil and filters Wide network of RENNER service partners. Pleasant running noise: Screw rotors consist of a special synthetic polymer mix Excellent attenuation characteristics Super sound insulated casings are standard. RENNERtronic-Plus controller is standard Intelligent controlling Greater operating safety Lower costs Clear LCD display Easy connection to multiple compressor management systems.
ADVANTAGES COMPARED TO OIL-FREE DRY-RUNNING COMPRESSORS: Discharge temperature 8 to 15 C above suction temperature (e.g. at an ambient temperature of 20 C max. 35 C discharge temperature, instead of 200 C) No expensive aftercooler required No danger of burns from components for service personnel due to low operating temperature (UVV accident prevention regulations) Maintenance work can be carried out immediately after switching the machine off Significantly lower rotating speeds as no losses from air reflow need to be compensated for Therefore the machine also runs much more quietly and sounds more pleasant Greater effectiveness in power transmission as no gear drives required Standard water-cooling through integrated, high-efficiency plate heat exchanger Easy to connect directly to an existing cooling water system Technical data: Product line overview Additional supply and exhaust air ducts no longer needed > Dust pollution in the installation area is drastically reduced Belt drive compatible with standard RENNER systems Easy to change to another discharge pressure Thanks to small and compact design Single-stage compression No problem from 5 to 13 bar No expensive two-stage intercooler required Much lower maintenance costs Reduced by approx. half Very low wear Long service life of air end Very small dimensions, small footprint Easily removable doors guarantee good access to all components for maintenance work Additional supply and exhaust air ducts no longer needed. Model Delivery rate in at Output Dimensions Weight 5 bar 8 bar 10 bar 13 bar in mm appox m 3 /min cfm m 3 /min cfm m 3 /min cfm m 3 /min cfm kw HP L x W x H kg RSW 18.5 3.69 130 2.95 104 2.69 95 18.5 25.0 1392 x 931 x 1574 595 RSW 22.0 4.98 176 3.79 134 3.31 117 22.0 30.0 1392 x 931 x 1574 595 RSW 30.0 5.56 196 4.71 166 4.12 146 3.53 125 30.0 40.0 1392 x 931 x 1574 680 RSW 37.0 6.51 230 5.67 200 5.03 178 4.39 155 37.0 50.0 1392 x 931 x 1574 760 RSW 45.0 6.51 230 6.24 220 5.46 193 45.0 60.0 1392 x 931 x 1574 810 RSWF 30.0 1.70-5.56 60-196 2.20-4.71 78-166 2.20-4.12 78-146 2.70-3.53 95-125 30.0 40.0 1542 x 931 x 1574 885 RSWF 37.0 1.70-6.51 60-230 2.20-5.67 78-200 2.20-5.03 78-178 2.70-4.39 95-155 37.0 50.0 1542 x 931 x 1574 900 RSWF 45.0 2.20-6.51 78-230 2.20-6.24 78-220 2.20-5.46 78-193 45.0 60.0 1542 x 931 x 1574 970
PROTECTED UTILITY PATENT, PATENTED WATER TREATMENT, PROVEN QUALITY Water-injected RENNER COMPRESSORS a patented and certified system!
WITH THE FREQUENCY CONTROL THERE IS A CLEAR REDUCTION IN THE OVERALL COSTS FOR COMPRESSED AIR SUPPLY WHY FREQUENCY CONTROL? 1. Energy saving: Energy consumption is reduced to a minimum in that demand is tailored to the specific operational requirements. 2. Low-fatigue: Minimised load on wearing parts and system components. Low maintenance costs and longer service life. Soft start eliminating start-up power peaks. 3. Pressure optimisation: Low discharge pressure made possible by keeping pressure band at a constant 0.2 bar. Reducing the discharge pressure by 1 bar approximates to an 8% reduction in energy consumption. 4. Reduction of discharge losses: No more idle running phases wasting power. COMPARISON: TOTAL COSTS AFTER FIVE YEARS. Conventional compressor: The energy costs after five years amount to 78% of the total costs incurred by a conventional compressor. The only way to reduce the overall costs is to minimise the energy costs. RSF compressor: It is possible to save up to 35% on energy costs by using RSF compressor developed by RENNER. This will translate to a 25% saving on overall costs and an improvement in your company s overall energy balance. The additional capital expenditure is very quickly amortised. 5. Lower power consumption leads to reduction in CO 2 emissions.
RENNER THE EXPERT IN SCREW COMPRESSORS Set up in 1994, this family-run company employs a highly motivated and successful team specialising in the development and production of such compressor systems. The structure and size of the company bring flexibility in terms of decision-making and speed in terms of practical results, thus enabling new developments to be optimally tailored to the needs of the market. THE RENNER PRODUCT RANGE: We can supply you with the right compressor for any application guaranteed. SCREW COMPRESSORS From 1.5 to 355 kw. also for oil-free compressed air of breathable quality Up to 43 bar / oil-free, e.g. for manufacture of PET bottles Supplied as compact units with pressure tank, refrigeration dryer and frequency control Special version with plate heat exchanger save energy and money! Customised models, mobile/portable, built-in units. Designed to customer specifications For special applications: gas compression. operation of drilling apparatus, rail and special-purpose vehicles SCROLLline-COMPRESSORS: for oil-free compressors from 1.5 to 16.5 kw COMPRESSED AIR ACCESSORIES: Filters, refrigeration dryers, adsorption dryers, condensate drains and disposal systems Made in Germany RENNER local dealer: RENNER GmbH Kompressoren D-74363 Gueglingen Emil-Weber-Strasse 32 Tel. +49 (0) 71 35 / 93 193-0 Fax +49 (0) 71 35 / 93 193-50 email: info@renner-kompressoren.de www.renner-kompressoren.com Reg.-Nr.: Q10205013 RSW - ENG - 8/ 2009 -