Markar 2015 Canadian Price List 2012-2015 Pemko Manufacturing Co.
Terms and Conditions...3-7 Hinge Finishes...8-9 Hinge Numbering System and Standard Lengths...10-11 Continuous Hinge Modifications...12 Continuous Hinge and Edge Guard Modifications...13 3500 Series Stainless Steel Pin and Barrel Security Hinges...14 300 Series Stainless Steel s...15-19 200 Series Carbon Steel s...20 100 Series Aluminum Pin and Barrel Continuous Hinges...21-22 Toilet Partition Hinges...23 Continuous Hinge Shims...24 Pivot Reinforcing Hinges...25 Surface Hinge Leaf Parts...25 Tools and Accessories...26 Screw Pack Pricing...27 Fastener Pricing...28-29 Flat Astragals...30 Edge Guards Order Form...31 Current Transfer Prep Information Form...32 2
ASSA ABLOY CANADA TERMS AND CONDTIONS ASSA ABLOY Door Security Solutions Canada, a division of assa abloy canada ltd. And all of its current and future associated companies, subsidiaries and operating brands reserve the right to decline an order, in whole or in part, when the type or quantity of goods or credit worthiness of the purchaser is not satisfactory to us in our sole and absolute discretion. warranties The terms and conditions contained herein constitute the entire agreement between the parties. Purchase orders, quotations ( quote ) requests, acknowledgements or the like issued by the purchaser that have contrary standard terms and conditions are not binding on ASSA ABLOY Door Security Solutions Canada, unless such terms and conditions are approved in a separate written agreement by ASSA ABLOY Door Security Solutions Canada s authorized representatives. In the event of an acceptance of purchaser s purchase order by ASSA ABLOY Door Security Solutions Canada, the purchaser agrees that such acceptance is solely conditioned on purchaser s acceptance of the terms and conditions set forth in this instrument, regardless of the terms and conditions specified in the purchaser s purchase order. The terms and conditions in purchaser s purchase order which conflict with terms and conditions of this instrument shall be disregarded and are hereby rejected, and this instrument shall constitute the entire agreement between ASSA ABLOY Door Security Solutions Canada and the purchaser. In the event that ASSA ABLOY Door Security Solutions Canada does not enforce or require strict performance of any term or condition hereof, or of any other document, instrument or other agreement relating to goods sold, such lack of enforcement or requirement of strict performance will not waive, affect or diminish any right of ASSA ABLOY Door Security Solutions Canada to enforce or require strict performance of such term or condition in the future. Prices: All prices are subject to change without notice and are not guaranteed. All shipments will be made at prices in effect at the time of order acceptance. Possession of price lists does not constitute an agreement to sell. Acknowledgements, invoices and quotations are on an Errors and Omissions Excepted basis (commonly referred to as E.O.E.). We reserve the right to correct clerical, stenographic and other obvious errors at any time. Terms: Minimum Invoice: Quotations: 1% tenth of the month following, net thirty (30) days after statement date. It is understood that ASSA ABLOY Door Security Solutions Canada may impose and charge a finance charge of 2% per month or the highest rate allowed by law on any amount which becomes past due and delinquent. Additionally, the Customer shall be responsible for all collection costs, court costs and reasonable attorney s fees in connection with the recovery of any delinquent amount. Minimum invoice for complete product is $250.00 net product value. The minimum invoice for parts orders is $100.00 net product value. Any orders not totaling these minimums will be invoiced at the minimums. This policy does not include the following: Cut (bitted) Keys of any type, Master Keyed Cylinders, Master Keyed Padlocks and Factory Generated Bitting Lists. Same day order expedites will be invoiced at book less 50%. If ASSA ABLOY Door Security Solutions Canada elects to offer a Quote, such Quote will be valid for ninety (90) days. Complete shipment of the order must be accepted by Purchaser within nine (9) calendar months from the date of issuance. 3
terms and conditions ASSA ABLOY CANADA TERMS AND CONDTIONS The Quote number and project name must be referenced on the order. Any invoiced order that has the incorrect discount applied to it and did not have a Quote copy attached to the order or the Quote number written on the order will have a service fee of $75.00 net DEDUCTED from any sales credit issued for the difference in discount. Changes to original quote will be accepted up to thirty (30) days from the date of the original quote. All changes must reference the original quote number. The Quote is null and void if the Purchase Order does not include ALL product lines listed on the Quote or if the quantities for an item covered by the Quote deviate by 10% or more. The Purchaser will have to solicit a new quotation. With the issuance and acceptance of a Quote for the purchase of products, the Purchaser agrees that products so purchased will not be resold or transferred to any Distributor not authorized by ASSA ABLOY Door Security Solutions Canada to sell its products. This would be inclusive of branches of the quoted Distributor. Failure to abide by this restriction may result in the Distributor s ineligibility for Quotes, or other actions in ASSA ABLOY Door Security Solutions Canada s discretion. ASSA ABLOY Door Security Solutions Canada and its sales representatives reserve the right, in their sole discretion and for any reason, to refuse a Distributor s request to quote a price other than ASSA ABLOY Door Security Solutions Canada s standard list price and regardless of whether ASSA ABLOY Door Security Solutions Canada or its sales representatives have previously quoted discounted prices to the Distributor on some or all of its orders. Special Orders: Products not cataloged or listed in this price book will be considered as special products, and will not be manufactured without prior approval from ASSA ABLOY Door Security Solutions Canada. A minimum special handling charge of $50.00 will be added for non cataloged product. Any additional labour or material required will be charged accordingly. Special products require special handling, and therefore standard lead times may not apply. Please consult with your Sales Representative for further details. High Security Orders: To ensure proper control of End User restricted Products, ASSA ABLOY Door Security Solutions Canada requires that the End User complete a Delivery of Controlled component form indicating to whom the product will be shipped to upon leaving the factory or the distribution centre. All orders must be accompanied with a current copy of the Authorization form and must be signed by the proper authorized personnel whose name(s) is on file with ASSA ABLOY Door Security Solutions Canada. High Security products are defined as high security key blanks, cut keys, sidebars, sub assemblies, complete and master-keyed cylinders, and key charts. ASSA ABLOY Door Security Solutions Canada reserves the right to request authorization from the end user if necessary before the order is processed. 4
ASSA ABLOY CANADA TERMS AND CONDTIONS Changes / Cancellation Changes or cancellations to a non stock order that has been released to production of Orders: will be subject to a charge of costs for material and labour expenses that have been incurred prior to notification from Customer. Handling charges are billed on Customer s original order. All change requests for Mercury or Turbo goods must be submitted in writing to Customer Service within two (2) business days of receipt of acknowledgement of the order. In those instances where a cancellation is accepted, ASSA ABLOY Door Security Solutions Canada reserves the right to make a reasonable cancellation charge based on expenses incurred. terms and conditions Packaging: Delivery: Many items are defined as to Case Lot Packaging or Minimum Order. The case lot policy does not apply to hardware to be used on a specific hardware project. Orders will be acknowledged and given a scheduled delivery date based on estimated manufacturing lead times. Complete information is required to process all orders. Orders with insufficient information for processing (i.e. keying information, door sizes, etc.) may be subject to extended lead times which are relative to the time required in obtaining the necessary information for order processing. Manufacturing lead time will begin once all information is received to process an order. ASSA ABLOY Door Security Solutions Canada will use reasonable efforts to deliver products as estimated, but makes no guarantee as to delivery dates. ASSA ABLOY Door Security Solutions Canada will not be liable for back charges incurred based on availability of product or as a result of delays in delivery caused by insufficient information required to process an order. ASSA ABLOY Door Security Solutions Canada will not be held responsible for delays in delivery caused by strikes, fires, floods or any other causes beyond our control, including the delivery of material to us. Under no circumstances shall ASSA ABLOY Door Security Solutions Canada be liable or accountable for consequential damages due to failure of delivery. Unless your order specifies otherwise, partial shipments will be made on or after the scheduled delivery date. Terms of Shipment: All products are shipped FOB the factory or the distribution centre unless otherwise agreed to in writing from ASSA ABLOY Door Security Solutions Canada. Title to and risk of loss product shipped is the responsibility of the purchaser and delivery is deemed to be complete upon transfer of the product to a common carrier. Carriers carry limited insurance. If the customer requires additional insurance coverage please contact our customer service department. All claims for shortages and damage are the responsibility of the purchaser. ASSA ABLOY Door Security Solutions Canada will assist the Purchaser with documentation necessary to make a claim if requested to do so by the purchaser. ASSA ABLOY Door Security Solutions Canada will ship via the best possible carrier. Shipments at the customer s request will be prepaid and any up-charge (actual cost less 5
latches, handles and strikes ASSA ABLOY CANADA TERMS AND CONDTIONS Claims: the amount negotiated by ASSA ABLOY Door Security Solutions Canada) will be added to the invoice. In the event of ASSA ABLOY Door Security Solutions Canada or Customer error, claims for shortages, pricing errors and/or incorrectly filled orders must be submitted in writing to Customer Service within thirty (30) days from receipt of material. Any claims for shortages or damage by the Carrier must be made by the Customer directly to the Carrier. Limited Carrier insurance is typically offered for all orders. If the Customer requires additional insurance, please contact a ASSA ABLOY Door Security Solutions Canada Customer Service Representative upon submittal of the order. ASSA ABLOY Door Security Solutions Canada will obtain requested insurance and the additional cost will be included on Customer s invoice. Invoice Deduction: Returned Goods: An ASSA ABLOY Door Security Solutions Canada Sales Representative or Customer Service Representative must be notified of any disputed invoices within thirty (30) days from the date of invoice. Deductions should only be taken for the disputed amount and the balance of the invoice is due and payable within standard payment terms. No Material is to be returned to our facilities without prior written approval from customer service. It is the policy of ASSA ABLOY Door Security Solutions Canada to not accept returns of any materials that are correctly furnished as per the Distributor s Purchase Order. Mercury and Turbo material may be returned with approval, if ASSA ABLOY Door Security Solutions Canada believes the product is resalable. All such product must be returned in its original unmarked carton. The goods must have been shipped and invoiced in the previous sixty (60) days. Returns will be at the distributor s expense. The goods returned will be subject to inspection and a minimum 20% restocking fee will be applied to compensate for the cost of inspection, repacking and handling. Return of product due to customer order error or accommodation must be prearranged with ASSA ABLOY Door Security Solutions Canada and approved in writing by Sales Management. A minimal restocking fee of 50% will be charged. Upon receipt and verification by ASSA ABLOY Door Security Solutions Canada that the returned merchandise is in saleable condition and that the material can be returned to the original manufacturer. Defective goods that are out of warranty period will not be accepted for return. Products that are master-keyed, special orders, key bitted will not be accepted under any circumstances, unless the product is determined to be defective. Procedure: Ensure the RGA labels that are sent to Purchaser by ASSA ABLOY Door Security Solutions Canada are visible on return goods shipment. Ensure that the RGA number appears on the return shipment label and is legible. Return the authorized merchandise within sixty(60) days from the date of RGA issuance. Return shipments must be freight prepaid to the distribution centre (at time some 6
ASSA ABLOY CANADA TERMS AND CONDTIONS directions may apply to return the goods to the original manufacturer) ASSA ABLOY Door Security Solutions Canada is not liable for damages to product during shipping. No credit may be taken or issued prior to RGA approval and receipt of product. All defective goods within the terms of our limited warranty may be returned for repair or replacement only. warranties Taxes: Governing Law: Indemnity: Force Majeur: Prices do not include any present or future Federal, Province, or Local property, license, privilege, sales, use, excise, gross receipts or other like taxes or assessments, which may result from transactions or any services performed in connection herewith. The rights and obligations of the parties shall be governed by the laws of the Province of Ontario, excluding any conflicts of law provisions. The United Nations Convention on Contracts for the International Sale of Goods shall not apply to this. Purchaser shall indemnify ASSA ABLOY Door Security Solutions Canada and hold ASSA ABLOY Door Security Solutions Canada harmless against all claims, liability, loss or other damages (including costs, legal or otherwise incurred by ASSA ABLOY Door Security Solutions Canada) to all persons for injury of any nature, including sickness and/or death, property damage at the time of delivery or after when the product is no longer in ASSA ABLOY Door Security Solutions Canada possession or control. ASSA ABLOY Door Security Solutions Canada shall not be liable for its failure to perform due to any contingencies beyond its control, including but not limited to acts of God, fires floods, wars, sabotage, accidents, labour disputes, shortages, government laws, ordinances, rules and regulations. ASSA ABLOY Door Security Solutions Canada shall not be liable for its failure to deliver due to its inability to obtain materials, equipment failure, labour actions, transportation issues or any similar contingencies. In the event of delays due to the aforementioned contingencies, the date of delivery will be postponed by such length of time as the circumstances dictate. Copyrights and Patents: All products in ASSA ABLOY Door Security Solutions Canada catalogues, brochures and price lists are either patented, Copyrighted or registered by ASSA ABLOY Door Security Solutions Canada. 7
hinge finishes Standard Powder Coat Finishes (LIST PRICE ADDER) $208.00/hinge, $104.00/edge guard-no minimum quantity, up to 8'. $416.00/hinge, $208.00/edge guard for lengths over 8', up to 10'. Over 10' consult factory. minimum $ charge for 1 to 3 hinges or edge guards. Standard pricing applies for larger quantities. BHMA Nearest Markar Equivalent Description 690 PC-1 Dark Bronze 714 PC-2 Eggshell White 693 PC-3 Semi-Gloss Black 689 PC-4 Aluminum 706 PC-5 Sun Gold 691 PC-6 Light Copper 605 PC-7 Polished Brass refer to pricing below PC-7 Polished Brass. 100 and 300 series only. $370.00/hinge, $185.00/edge guard, up to 8'. $583.00/hinge, $289.00/edge guard up to 8'. Custom Powder Coat Finishes Over 84 colors available. Sample color chip must accompany order. Priced at time of order. Special Finishes BHMA Nearest US Equivalent Description Up to 8' 8' to 10' 672 US26 Polished Aluminum $608.00/hinge $763.00/hinge 629 US32 Polished Stainless $608.00/hinge $763.00/hinge Kynar Paint With Color Approval, consult Factory. Over 10' consult factory. 8
U.S. Standard & B.H.M.A. Finish Codes Reference List Nearest BHMA US Equivalent Description 310 US3 gold anodized 311 US9 light bronze anodized 312 medium bronze anodized 313 US20A dark bronze anodized hinge finishes 315 US19 black anodized 600 USP primed for paint 603 US2G zinc plated 628 US28 clear anodized 629 US32 bright stainless steel 630 US32D satin stainless steel 672 US26 bright polished aluminum 689 US28 aluminum paint 690 US20A dark bronze paint 691 US10 light bronze paint 693 US19 black paint 706 US4 gold paint 714 white paint Special Anodized Finishes BHMA Nearest US Equivalent Description 310 US3 gold anodized 311 US9 light bronze anodized 312 medium bronze anodized 315 US19 black anodized Add $112.00/hinge to bronze price. $299.00 net setup charge. 9
hinge numbering system and standard lengths Hinge Prefixes EG Edge Guard FM Edge Mount FS Full Surface HG Hinge/Guard HM Half Mortise HS Half Surface SC Swing Clear Hinge Series 100 Aluminum barrel hinges with stainless steel pin 200 Carbon steel barrel hinges with stainless steel pin 300 Stainless steel barrel hinges with stainless steel pin 400 Spring loaded aluminum toilet partition hinges 900 Spring loaded stainless steel toilet partition hinges 3500 12 gauge stainless steel pin and barrel security hinges Series number indicates the type of hinge and base material used. Hinge Models 00 Edge mount (formerly full mortise) 01 Full surface 1/8" offset 02 Full surface, flush 03 Half surface, 1/8" offset 04 Half mortise, 1/8" offset 05 Edge mount hinge/guard 06 Half mortise hinge/guard 08 Edge guard 09 Full surface, swing clear 10 Swing clear hinge/guard 11 Edge mount, self aligning 15 Edge mount, self aligning flush edge guard 21 Full surface inset, 3/4" offset 22 Edge mount hinge/guard, deep 23 25 Edge mount hinge/guard, deep, thru bolt Edge mount swing clear 26 Edge mount hinge/guard, swing clear 27 Edge mount, safety hinge 29 Edge mount, self aligning The last two digits of the model number indicate the application. Other numbers are used for specific applications. 10
Option Suffixes AMS CTP DDP EL ETAP EPT HT LL PC RB WT Adjustable Monitoring Switch Current Transfer Preparation Dutch Door Prep ElectroLynx Current Transfer Electrical Transfer Access Prep Electrical Power Transfer Hospital Tip Lead Lined Powder Coated Raised Barrel Wide Throw Standard Hinge Length Conversion Chart Door Opening Actual Length 6'8" 79-3/16" 7'0" 83-1/8" 7'2" 85-1/8" 8'0" 95" 10'0" 118-3/4" Custom hinge length will be evaluated at the time of request to ensure proper pin to knuckle alignment. Some custom length requests may be adjusted to ensure a proper hinge assembly. Specify Handing on all custom hinge lengths LEFT HAND LEFT HAND REVERSE RIGHT HAND RIGHT HAND REVERSE Custom Design Markar s engineering department is willing to assist you in developing custom applications to solve any of your unique door hinging problems. Together with the customer, we will go through an official sign-off process to assure custom hinges fit your exact needs. There will be a custom drawing approval fee of $174.00 per opening. A credit for this fee is issued after approval for fabrication and placement of purchase order. hinge numbering system and standard lengths 11
continuous hinge modifications Hinge Suffix HT-MP DDP-MP WT RB-MP Description Hospital Tip Available on all models except spring-loaded toilet partition hinges. Dutch Door Prep Continuous frame leaf with two-piece door leaf. Indicate handing, clearances, door and frame heights, and materials when ordering. Available on all models. Wide Throw FM300WT Specify distance from pin centerline to heel edge of hinge when ordering. Note: Reinforcement may be required on extreme wide throw applications. Please contact our Customer Service or Technical Support departments at (800) 824-3018. Raised Barrel (Swaged) For cased open or center pivot doors. Available on all edge mount and half surface models except on aluminum hinges. Addition to hinge cost +$ 96.00 +$ 96.00 Page 13 for pricing +$ 82.00 LL-MP Lead Lined Cover (Standard 4 Lbs./SQ.FT.) Used for X-ray room doors and other locations where radiation leakage could be a problem. Only available on surface mounted hinges. Lead lined astragal for EGT + $333.00 Staggard hole pattern for Edge Guard + $70.00 +$ 195.00 Per cover Sheared Leaf Custom hinge information form required. Contact Customer Service at (800) 824-3018. Custom Hole Pattern Any hole shape or pattern other than Markar's standard templated hole pattern. Indicate desired pattern and include dimensioned diagrams when ordering. Security Studs Stainless steel security studs mounted to the frame leaf. Door leaf is drilled to accommodate studs. Three studs installed on hinges up to 85-1/8", four studs installed on hinges over 85-1/8". Door and frame must be specially prepared to accommodate security studs. Up to 85" +$ 162.00 Over 85" +$ 208.00 Up to 85" +$ 139.00 Over 85" +$ 185.00 Automatic Door Bottom Cut +$ 80.00 Welded End Pins +$ 105.00 Plug Weld +$ 78.00 Blank Hinges Holes omitted for special applications such as welded installations. +$ 116.00 Cut to Length For hinges 40" to 83-1/8" in length, add $70.00 to 7'0" price For hinges 83-3/16" to 95" in length, add $70.00 to 8'0" price For hinges 95-1/16" to 118-3/4" in length, add $70.00 to 10'0" price For hinges 118-13/16" to 192" in length (spliced), consult factory For edge guards add $39.00 12
Product Number Description Addition to hinge cost ElectroLynx Current Transfer Hinges WT Hinges EL4 For 300, 3500, 100, and 200 series edge mount only. +$520.00 +$ 720.00 With ElectroLynx connectors (4 wire). EL8 For 300, 3500, 100, and 200 series edge mount only. +$ 693.00 +$ 960.00 With ElectroLynx connectors (8 wire). EL12 For 300, 3500, 100, and 200 series edge mount only. With ElectroLynx connectors (12 wire). Note: Add $200.00 for FM300WT20 thru FM300WT50 +$ 924.00 +$ 1,200.00 Note: When ordering, add either Hinge or WT Hinge additional cost. ETAP Electrical Transfer Access Prep Cutout prep for the AMS and EL. Modifications allow easy one person access to wiring between the hinge and door frame. CTP Current Transfer Prep Centerline of hinge is standard location. Hinge leaf cutout to accommodate Markar's EL-EPT/EL-CEPT or Von Duprin's Electric Power Transfer. Provide location and handing for all locations. CTP Add $ 139.00 to the cost of these models. 3505, 305, 322, 323, 325, 326, 329 +$ 204.00 +$ 112.00 Electric Power Transfer Units EL-EPT Stamped Power Transfer 12 Wire ElectroLynx +$ 229.00 EL-EPTL Stamped Long Power Transfer 12 Wire ElectroLynx +$ 297.00 EL-EPT-SC Stamped Swing Clear Power Transfer 12 Wire ElectroLynx +$ 396.00 EL-CEPTx32D Cast Power Transfer 12 Wire ElectroLynx US32D +$ 578.00 EL-CEPTx10B Cast Power Transfer 12 Wire ElectroLynx US10B +$ 601.00 Note: CTP prep charge is additional. continuous hinge and edge guard modifications AMS Adjustable Monitoring Switch Rigid welded assembly gives you the ability to adjust your monitoring switch to work with all applications. Not available on aluminum hinges or powder coat finishes. +$ 553.00 Standard Edge Guard Cutouts - Add for each cutout. For custom cutouts, consult factory for pricing. Templates may be required. 16L 1-1/8" x 2-1/4" 161 Latch +$ 58.00 86M 1-1/4" x 8" Mortise Lock +$ 58.00 ASA 1-1/4" x 4-7/8" ASA Strike +$ 58.00 16S 1-1/8" x 2-3/4" 161 Strike +$ 58.00 MFB 1" x 6-3/4" Manual Flush Bolt +$ 58.00 AFB 1" x 8-1/2" Automatic Flush Bolt +$ 58.00 Cut down charge for special lengths +$ 38.00 Security Fastener Torx head security fasteners are available in lieu of standard fasteners. See hinge types for options. Refer to pages 25-27 for detailed fastener information. Page 25 for pricing 13
3500 series stainless steel pin and barrel security hinges Product Number Description Standard Finish Length FM3500 Edge Mount Security Hinge MS1244SP10SS24 FS3501 Full Surface Security Hinge 1/8" Inset MS1244SP10SS24 FS3502 Full Surface Security Hinge MS1244SP10SS24 Satin Stainless Steel 6'8" (79-3/16") $ 1,052.00 Satin Stainless Steel 7'0" (83-1/8") $ 1,052.00 Satin Stainless Steel 7'2" (85-1/8") $ 1,236.00 Satin Stainless Steel 8'0" (95") $ 1,236.00 Satin Stainless Steel 10'0" (118-3/4") $ 1,502.00 Satin Stainless Steel 6'8" (79-3/16") $ 1,248.00 Satin Stainless Steel 7'0" (83-1/8") $ 1,248.00 Satin Stainless Steel 7'2" (85-1/8") $ 1,329.00 Satin Stainless Steel 8'0" (95") $ 1,329.00 Satin Stainless Steel 10'0" (118-3/4") $ 1,664.00 Satin Stainless Steel 6'8" (79-3/16") $ 1,248.00 Satin Stainless Steel 7'0" (83-1/8") $ 1,248.00 Satin Stainless Steel 7'2" (85-1/8") $ 1,329.00 Satin Stainless Steel 8'0" (95") $ 1,329.00 Satin Stainless Steel 10'0" (118-3/4") $ 1,664.00 Optional HG3505 Hinge Guard Security Hinge MS1244SP10SS24 Adjustable Screw Pack (Optional) M91-0002-630 Satin Stainless Steel 6'8" (79-3/16") $ 1,317.00 Satin Stainless Steel 7'0" (83-1/8") $ 1,317.00 Satin Stainless Steel 7'2" (85-1/8") $ 1,502.00 Satin Stainless Steel 8'0" (95") $ 1,502.00 Satin Stainless Steel 10'0" (118-3/4") $ 1,791.00 All hinges come with UL fire rated label as standard FM3500 can be used on doors up to 2-1/4" Hospital Tip is a standard feature at no additional charge Security Fasteners refer to pages 25-27 When ordering Security Screw Packs, please specify either All Wood (WW), All Metal (MM) or Half Metal/Half Wood (MW) Adjust-A-Screw option is available for applicable models as shown. add $30.00 per Edge Guard See page 25 for Screw Pack Pricing 14
Product Number Description Standard Finish Length FM300 Edge Mount KMPSS FM300WT10 Edge Mount Wide Throw 2" Clearance Satin Stainless Steel 6'8" (79-3/16") $ 578.00 Satin Stainless Steel 7'0" (83-1/8") $ 578.00 Satin Stainless Steel 7'2" (85-1/8") $ 624.00 Satin Stainless Steel 8'0" (95") $ 670.00 Satin Stainless Steel 10'0" (118-3/4") $ 994.00 Satin Stainless Steel 6'8" (79-3/16") $ 915.00 Satin Stainless Steel 7'0" (83-1/8") $ 915.00 Satin Stainless Steel 7'2" (85-1/8") $ 1,040.00 Satin Stainless Steel 8'0" (95") $ 1,040.00 Satin Stainless Steel 10'0" (118-3/4") $ 1,285.00 FM300WT20 2-9/16" Clearance add $ 698.00 FM300WT30 3-3/16" Clearance add $ 698.00 FM300WT40 3-7/8" Clearance add $ 1,092.00 FM300WT50 5" Clearance add $ 1,092.00 FM300WT10: KMPSS FM300WT20 thru FM300WT50: KMPWTM 300 series stainless steel pin and barrel hinges Consult factory for doors over 1-3/4" thick. FS301 Full Surface 1/8" Inset M91-0003-630 M91-0063-630 Satin Stainless Steel 6'8" (79-3/16") $ 832.00 Satin Stainless Steel 7'0" (83-1/8") $ 832.00 Satin Stainless Steel 7'2" (85-1/8") $ 971.00 Satin Stainless Steel 8'0" (95") $ 971.00 Satin Stainless Steel 10'0" (118-3/4") $ 1,363.00 FS302 Full Surface Flush Mount M91-0003-630 M91-0063-630 Satin Stainless Steel 6'8" (79-3/16") $ 832.00 Satin Stainless Steel 7'0" (83-1/8") $ 832.00 Satin Stainless Steel 7'2" (85-1/8") $ 971.00 Satin Stainless Steel 8'0" (95") $ 971.00 Satin Stainless Steel 10'0" (118-3/4") $ 1,363.00 HS303 Half Surface M91-0003-630, TKS1267SP10SS23, M91-0063-630 Satin Stainless Steel 6'8" (79-3/16") $ 763.00 Satin Stainless Steel 7'0" (83-1/8") $ 763.00 Satin Stainless Steel 7'2" (85-1/8") $ 890.00 Satin Stainless Steel 8'0" (95") $ 890.00 Satin Stainless Steel 10'0" (118-3/4") $ 1,132.00 15
300 series stainless steel pin and barrel hinges Optional Product Number Description Standard Finish Length HM304 Half Mortise M91-0003-630, TKS1267SP10SS23, M91-0063-630 HG305 Hinge/Guard KMPSS Adjustable Screw Pack (Optional) M91-0002-630 HG306 Hinge/Guard TKS1267SP10SS23, M91-0003-630, M91-0063-630 Satin Stainless Steel 6'8" (79-3/16") $ 751.00 Satin Stainless Steel 7'0" (83-1/8") $ 751.00 Satin Stainless Steel 7'2" (85-1/8") $ 867.00 Satin Stainless Steel 8'0" (95") $ 867.00 Satin Stainless Steel 10'0" (118-3/4") $ 1,132.00 Satin Stainless Steel 6'8" (79-3/16") $ 832.00 Satin Stainless Steel 7'0" (83-1/8") $ 832.00 Satin Stainless Steel 7'2" (85-1/8") $ 878.00 Satin Stainless Steel 8'0" (95") $ 924.00 Satin Stainless Steel 10'0" (118-3/4") $ 1,340.00 Satin Stainless Steel 6'8" (79-3/16") $ 774.00 Satin Stainless Steel 7'0" (83-1/8") $ 774.00 Satin Stainless Steel 7'2" (85-1/8") $ 913.00 Satin Stainless Steel 8'0" (95") $ 913.00 Satin Stainless Steel 10'0" (118-3/4") $ 1167.00 Optional EG308 M91-0020-630 Adjustable Edge Guard *Use attached order form on page 29 Adjustable Screw Pack (Optional) M91-0005-630 Satin Stainless Steel 6'8" (79-3/16") $ 347.00 Satin Stainless Steel 7'0" (83-1/8") $ 347.00 Satin Stainless Steel 7'2" (85-1/8") $ 382.00 Satin Stainless Steel 8'0" (95") $ 382.00 Satin Stainless Steel 10'0" (118-3/4") $ 439.00 Standard for 1-3/4" bevel edge doors; square edge available upon request. See page 11 for optional hardware cutouts and cut to net size. EGC308 M91-0020-630 Single Return Edge Guard *Use attached order form on page 29. Standard for 1-3/4" bevel edge doors; square edge available upon request. See page 11 for optional hardware cutouts and cut to net size. Satin Stainless Steel 6'8" (79-3/16") $ 312.00 Satin Stainless Steel 7'0" (83-1/8") $ 312.00 Satin Stainless Steel 7'2" (85-1/8") $ 347.00 Satin Stainless Steel 8'0" (95") $ 347.00 Satin Stainless Steel 10'0" (118-3/4") $ 452.00 16
Optional Optional Product Number Description Standard Finish Length EGT308 Adjustable Edge Guard/ Astragal *Use attached order form on page 29. M91-0020-630 Adjustable Screw Pack (Optional) M91-0005-630 Standard for 1-3/4" bevel edge doors; square edge available upon request. See page 11 for optional hardware cutouts and cut to net size. FS/SC309 Full Surface Swing Clear M91-0003-630, KMSSS, M91-0063-630 HG310 Swing Clear Hinge/Guard KMPSS Adjustable Screw Pack (Optional) M91-0002-630 For square edge doors. Satin Stainless Steel 6'8" (79-3/16") $ 416.00 Satin Stainless Steel 7'0" (83-1/8") $ 416.00 Satin Stainless Steel 7'2" (85-1/8") $ 486.00 Satin Stainless Steel 8'0" (95") $ 486.00 Satin Stainless Steel 10'0" (118-3/4") $ 613.00 Satin Stainless Steel 6'8" (79-3/16") $ 948.00 Satin Stainless Steel 7'0" (83-1/8") $ 948.00 Satin Stainless Steel 7'2" (85-1/8") $ 1,098.00 Satin Stainless Steel 8'0" (95") $ 1,098.00 Satin Stainless Steel 10'0" (118-3/4") $ 1,329.00 Satin Stainless Steel 6'8" (79-3/16") $ 1,017.00 Satin Stainless Steel 7'0" (83-1/8") $ 1,017.00 Satin Stainless Steel 7'2" (85-1/8") $ 1,167.00 Satin Stainless Steel 8'0" (95") $ 1,167.00 Satin Stainless Steel 10'0" (118-3/4") $ 1,456.00 300 series stainless steel pin and barrel hinges HG311 Swing Clear Hinge/Guard KMPSS Satin Stainless Steel 6'8" (79-3/16") $ 821.00 Satin Stainless Steel 7'0" (83-1/8") $ 821.00 Satin Stainless Steel 7'2" (85-1/8") $ 936.00 Satin Stainless Steel 8'0" (95") $ 936.00 Satin Stainless Steel 10'0" (118-3/4") $ 1,190.00 For square edge doors. HG315 Edge Mount Hinge/Guard KMPSS Satin Stainless Steel 6'8" (79-3/16") $ 647.00 Satin Stainless Steel 7'0" (83-1/8") $ 647.00 Satin Stainless Steel 7'2" (85-1/8") $ 693.00 Satin Stainless Steel 8'0" (95") $ 740.00 Satin Stainless Steel 10'0" (118-3/4") $ 1,075.00 17
300 series stainless steel pin and barrel hinges Optional Product Number Description Standard Finish Length FS321 Full Surface 3/4" Offset M91-0003-630 M91-0063-630 HG322 Edge Mount Hinge/Guard KMPSS Adjustable Screw Pack (Optional) M91-0002-630 HG323 Edge Mount Hinge/Guard M91-0064-02-630, M91-0046-630 Satin Stainless Steel 6'8" (79-3/16") $ 1,040.00 Satin Stainless Steel 7'0" (83-1/8") $ 1,040.00 Satin Stainless Steel 7'2" (85-1/8") $ 1,179.00 Satin Stainless Steel 8'0" (95") $ 1,179.00 Satin Stainless Steel 10'0" (118-3/4") $ 1,583.00 Satin Stainless Steel 6'8" (79-3/16") $ 1,167.00 Satin Stainless Steel 7'0" (83-1/8") $ 1,167.00 Satin Stainless Steel 7'2" (85-1/8") $ 1,352.00 Satin Stainless Steel 8'0" (95") $ 1,352.00 Satin Stainless Steel 10'0" (118-3/4") $ 1,733.00 Satin Stainless Steel 6'8" (79-3/16") $ 1,213.00 Satin Stainless Steel 7'0" (83-1/8") $ 1,213.00 Satin Stainless Steel 7'2" (85-1/8") $ 1,398.00 Satin Stainless Steel 8'0" (95") $ 1,398.00 Satin Stainless Steel 10'0" (118-3/4") $ 1,802.00 FM/SC325 Edge Mount Swing Clear Hinge KMPSS Satin Stainless Steel 6'8" (79-3/16") $ 901.00 Satin Stainless Steel 7'0" (83-1/8") $ 901.00 Satin Stainless Steel 7'2" (85-1/8") $ 1,052.00 Satin Stainless Steel 8'0" (95") $ 1,052.00 Satin Stainless Steel 10'0" (118-3/4") $ 1,386.00 For square edge doors. HG326 Swing Clear Hinge/Guard Satin Stainless Steel 6'8" (79-3/16") $ 1,155.00 Satin Stainless Steel 7'0" (83-1/8") $ 1,155.00 Optional KMPSS Adjustable Screw Pack (Optional) M91-0002-630 For square edge doors. Satin Stainless Steel 7'2" (85-1/8") $ 1,306.00 Satin Stainless Steel 8'0" (95") $ 1,306.00 Satin Stainless Steel 10'0" (118-3/4") $ 1,687.00 18
Product Number Description Standard Finish Length FM327 Edge Mount Safety Hinge KMPSS HG329 Satin Stainless Steel 6'8" (79-3/16") $ 1,005.00 Satin Stainless Steel 7'0" (83-1/8") $ 1,005.00 NON-FIRE RATED Satin Stainless Steel 7'2" (85-1/8") $ 1,132.00 Satin Stainless Steel 8'0" (95") $ 1,132.00 Satin Stainless Steel 10'0" (118-3/4") $ 1,433.00 Swing Clear Hinge/Guard KMPSS For square edge doors. FM338 KMPSS Satin Stainless Steel 6'8" (79-3/16") $ 971.00 Satin Stainless Steel 7'0" (83-1/8") $ 971.00 Satin Stainless Steel 7'2" (85-1/8") $ 1,121.00 Satin Stainless Steel 8'0" (95") $ 1,121.00 Satin Stainless Steel 10'0" (118-3/4") $ 1,433.00 Edge Mount Pin & Satin Stainless Steel 6'8" (79-3/16") $ 612.00 Barrel Hinge for 1-3/8" Thick Door Satin Stainless Steel 7'0" (83-1/8") $ 612.00 NON-FIRE RATED Satin Stainless Steel 7'2" (85-1/8") $ 660.00 Satin Stainless Steel 8'0" (95") $ 708.00 Satin Stainless Steel 10'0" (118-3/4") $ 1,050.00 300 series stainless steel pin and barrel hinges FM344 KMPSS Short Leaf Edge Mount Pin & Barrel Hinge Satin Stainless Steel 6'8" (79-3/16") $ 612.00 Satin Stainless Steel 7'0" (83-1/8") $ 612.00 Satin Stainless Steel 7'2" (85-1/8") $ 660.00 Satin Stainless Steel 8'0" (95") $ 708.00 Satin Stainless Steel 10'0" (118-3/4") $ 1,050.00 FM600 316 Stainless Steel Edge Mount Pin & Barrel Hinge KMPSS Satin Stainless Steel 6'8" (79-3/16") $ 1,470.00 Satin Stainless Steel 7'0" (83-1/8") $ 1,470.00 Consult factory for hinges over 7 ft. All applicable hinges come with UL fire rated label as standard. Please specify if WHI label is required. When ordering Security Screw Packs, please specify either All Wood (WW), All Metal (MM) or Half Metal/Half Wood (MW). Add $ 57.00 list per hinge for optional thru-bolts (M91-0064-01-630). Adjust-A-Screw Option for Edge Guards add $30.00 per Edge Guard. MTSP100 is recommended for installing HG310 & HG311. See page 25 for Screw Pack Pricing. 19
200 series carbon steel pin and barrel hinges Product Number Description Standard Finish Length FM200 Edge Mount s KMPSS FS201 M91-0003-630 Full Surface 1/8" Inset s M91-0063-630 FS202 M91-0003-630 Full Surface Flush Mount s M91-0063-630 Zinc Plated Steel 6'8" (79-3/16") $ 439.00 Zinc Plated Steel 7'0" (83-1/8") $ 439.00 Zinc Plated Steel 7'2" (85-1/8") $ 532.00 Zinc Plated Steel 8'0" (95") $ 532.00 Zinc Plated Steel 6'8" (79-3/16") $ 555.00 Zinc Plated Steel 7'0" (83-1/8") $ 555.00 Zinc Plated Steel 7'2" (85-1/8") $ 670.00 Zinc Plated Steel 8'0" (95") $ 670.00 Zinc Plated Steel 6'8" (79-3/16") $ 555.00 Zinc Plated Steel 7'0" (83-1/8") $ 555.00 Zinc Plated Steel 7'2" (85-1/8") $ 670.00 Zinc Plated Steel 8'0" (95") $ 670.00 HS203 Half Surface s Zinc Plated Steel 6'8" (79-3/16") $ 497.00 Zinc Plated Steel 7'0" (83-1/8") $ 497.00 TKS1267SP10SS23, M91-0003-630, M91-0063-630 Zinc Plated Steel 7'2" (85-1/8") $ 601.00 Zinc Plated Steel 8'0" (95") $ 601.00 HM204 Half Mortise s Zinc Plated Steel 6'8" (79-3/16") $ 497.00 Zinc Plated Steel 7'0" (83-1/8") $ 497.00 TKS1267SP10SS23, M91-0003-630, M91-0063-630 Zinc Plated Steel 7'2" (85-1/8") $ 601.00 Zinc Plated Steel 8'0" (95") $ 601.00 All hinges come with UL fire rated label as standard. Please specify if WHI label is required. When ordering Security Screw Packs, please specify either All Wood (WW), All Metal (MM) or Half Metal/Half Wood (MW). Add $63.00 list per hinge for optional thru-bolts (M91-0064-01-630). Finish is zinc plated steel. See page 6 for additional finish options. See page 25 for Screw Pack Pricing. 20
Product Number Description Length FM100 Edge Mount Pin and Barrel Continuous Hinges Aluminum: KMPSS Bronze: M91-0001-313 Aluminum: Bronze: M91-0030 FS101 Full Surface 1/8" Inset Pin and Barrel Continuous Hinges Aluminum: M91-0003-626 Bronze: M91-0003-313 M91-0047-630 FS102 Full Surface Pin and Barrel Continuous Hinges Aluminum: M91-0003-626 Bronze: M91-0003-313 M91-0047-630 Standard Finish Standard Finish 6'8" (79-3/16") Clear Anod $ 532.00 Bronze Anod $ 578.00 7'0" (83-1/8") Clear Anod $ 532.00 Bronze Anod $ 578.00 7'2" (85-1/8") Clear Anod $ 613.00 Bronze Anod $ 717.00 8'0" (95") Clear Anod $ 613.00 Bronze Anod $ 717.00 6'8" (79-3/16") Clear Anod $ 624.00 Bronze Anod $ 797.00 7'0" (83-1/8") Clear Anod $ 624.00 Bronze Anod $ 797.00 7'2" (85-1/8") Clear Anod $ 728.00 Bronze Anod $ 913.00 8'0" (95") Clear Anod $ 728.00 Bronze Anod $ 913.00 6'8" (79-3/16") Clear Anod $ 624.00 Bronze Anod $ 797.00 7'0" (83-1/8") Clear Anod $ 624.00 Bronze Anod $ 797.00 7'2" (85-1/8") Clear Anod $ 728.00 Bronze Anod $ 913.00 8'0" (95") Clear Anod $ 728.00 Bronze Anod $ 913.00 100 series aluminum pin and barrel continuous hinges HS103 Half Surface Pin and Barrel Continuous Hinges Aluminum: M91-0003-626, KMSSS Bronze: M91-0001-313, M91-0003-626 Aluminum:, M91-0047-630 Bronze: M91-0030, M91-0047-313 6'8" (79-3/16") Clear Anod $ 613.00 Bronze Anod $ 740.00 7'0" (83-1/8") Clear Anod $ 613.00 Bronze Anod $ 740.00 7'2" (85-1/8") Clear Anod $ 705.00 Bronze Anod $ 878.00 8'0" (95") Clear Anod $ 705.00 Bronze Anod $ 878.00 HM104 Half Mortise Pin and Barrel Continuous Hinges Aluminum: M91-0003-626, KMSSS Bronze: M91-0001-313, M91-0003-626 Aluminum:, M91-0047-630 Bronze: M91-0030, M91-0047-313 6'8" (79-3/16") Clear Anod $ 659.00 Bronze Anod $ 740.00 7'0" (83-1/8") Clear Anod $ 659.00 Bronze Anod $ 740.00 7'2" (85-1/8") Clear Anod $ 705.00 Bronze Anod $ 878.00 8'0" (95") Clear Anod $ 705.00 Bronze Anod $ 878.00 21
100 series aluminum pin and barrel continuous hinges Optional Optional Product Number Description Length HG105 Hinge/Guard Pin and Barrel Continuous Hinges Aluminum: KMPSS Bronze: M91-0001-313 Aluminum: Bronze: M91-0030 Adjustable Screw Pack (Optional) Aluminum: M91-0002-630 Bronze: M91-0002-313 EG108 Edge Guard Pin and Barrel Continuous Hinges* Aluminum: M91-0013-628 Bronze: M91-0013-313 Adjustable Screw Pack (Optional) Aluminum: M91-0005-630 Bronze: M91-0005-313 Security Screw Pack: Aluminum: Bronze: M91-0030 Standard Finish Standard Finish 6'8" (79-3/16") Clear Anod $ 693.00 Bronze Anod $ 763.00 7'0" (83-1/8") Clear Anod $ 693.00 Bronze Anod $ 763.00 7'2" (85-1/8") Clear Anod $ 786.00 Bronze Anod $ 867.00 8'0" (95") Clear Anod $ 786.00 Bronze Anod $ 867.00 6'8" (79-3/16") Clear Anod $ 266.00 Bronze Anod $ 289.00 7'0" (83-1/8") Clear Anod $ 266.00 Bronze Anod $ 289.00 7'2" (85-1/8") Clear Anod $ 301.00 Bronze Anod $ 335.00 8'0" (95") Clear Anod $ 301.00 Bronze Anod $ 335.00 Standard for beveled edge doors * Use attached order form on page 29. When ordering Security Screw Packs, please specify either All Wood (WW), All Metal (MM) or Half Metal/Half Wood (MW). For optional M26-0015-02 Molly Jack Nuts add $4.00 (per each) list.. Add $6.00 per hinge for optional thru-bolts (Clear: M91-0004-02-626, Bronze: M91-0004-02-313) Aluminum 628 clear anodized. Bronze 313 dark bronze anodized. Adjust-A-Screw option available for applicable models as shown. Add $30.00 per hinge. See page 25 for Screw Pack Pricing. Aluminum pin and barrel hinges are NOT FIRE-RATED. 22
Aluminum Toilet Partition Hinges Product Number Description Standard Finish Length FM400 FS402 Full Mortise Spring Loaded Pin & Barrel Toilet Partition Hinges Flush Spring Loaded Pin and Barrel Toilet Partition Hinges *Safety lift feature available. Clear Anod Aluminum 54" $ 588.00 Clear Anod Aluminum 57" $ 600.00 Clear Anod Aluminum 54" $ 633.00 Clear Anod Aluminum 57" $ 643.00 Clear Anod Aluminum 72" $ 717.00 toilet partition hinges Door weight shall not exceed 80 pounds. Add $55.00 for Safety Lift Feature on applicable models. Add $72.00 for one-way shoulder bolt security option for FS402. Special length hinges (24" long minimum; less than 54") + $131.00/hinge. (Check factory for over 54" length). Stainless Steel Toilet Partition Hinges Product Number Description Standard Finish Length FM900 Full Mortise Satin Stainless Steel 54" Spring-Loaded Pin and Barrel Satin Stainless Steel 57" Toilet Partition Hinges $ 618.00 $ 630.00 FS902 Flush Spring-Loaded Pin and Barrel Toilet Partition Hinges Satin Stainless Steel Satin Stainless Steel 54" 57" $ 755.00 $ 785.00 FS910 Flush Spring-Loaded Surface-Mounted Toilet Partition Hinges Satin Stainless Steel Satin Stainless Steel Satin Stainless Steel 54" 57" 72" $ 705.00 $ 705.00 $ 763.00 For full function of Markar s spring-loaded hinge, door weight shall not exceed 80 pounds. Add $53.00 for torx drive/torx shoulder security option. Special length hinges (24" long minimum, less than 54") + $97.00/hinge. (Check factory for over 54" length). 23
toilet partition hinges & continuous hinge shims Continuous Hinge Shims Product Number Description Properties Length CHS-1 Continuous Hinge Shim Slip-In Installation. CHS-2 Continuous Hinge Shim Hinge must be removed. Not available in 10'0" length. Cut down charge for special lengths $39.00. 16 gauge galvanneal. Let Markar s Continuous Hinge Shim solve your problem of non-square frames and improper door clearances. 16 gauge (1/16" thickness) 6'8" (79-3/16") $ 74.00 16 gauge (1/16" thickness) 7'0" (83-1/8") $ 76.00 16 gauge (1/16" thickness) 8'0" (95") $ 79.00 16 gauge (1/16" thickness) 6'8" (79-3/16") $ 89.00 16 gauge (1/16" thickness) 7'0" (83-1/8") $ 93.00 16 gauge (1/16" thickness) 8'0" (95") $ 96.00 CHS-1 CHS-2 24
Reinforcing Pivot Hinges Product Number Description Standard Finish B1921 Full Surface 1/2" offset for 4" Hinges B1923 Full Surface 3/4" offset for 4 1/2" Hinges Surface Leaf Hinge Parts Product Number Description Length MP810 Snap-on cover 100 Series Specify door height and finish. Mill 200 Series Hinges Standard Finish Zinc Plated (US2G) $95.00 Zinc Plated (US2G) $95.00 Standard Finish 6'8" (79-3/16") Clear Anod $ 42.00 Bronze Anod $ 66.00 7'0" (83-1/8") Clear Anod $ 42.00 Bronze Anod $ 66.00 7'2" (85-1/8") Clear Anod $ 46.00 Bronze Anod $ 67.00 8'0" (95") Clear Anod $ 50.00 Bronze Anod $ 71.00 reinforcing pivot hinges and surface hinge leaf parts MP506 Snap-on cover 200 and 300 Series Specify door height and finish. 200 Series: Mill Finish 300 Series: Brush Finish 6'8" (79-3/16") Mill $ 51.00 Brushed $ 77.00 7'0" (83-1/8") Mill $ 51.00 Brushed $ 77.00 7'2" (85-1/8") Mill $ 52.00 Brushed $ 81.00 8'0" (95") Mill $ 54.00 Brushed $ 86.00 10'0" (118-3/4") Mill $ 70.00 Brushed $ 107.00 Brushed 300 Series Hinges Product Number MP606 Description Cover clip For attaching MP506 cover caps to surface mounted 200 and 300 series hinge leaves (Quantity 20). $ 28.00 25
tools and accessories Product Number Description TORXBIT20 Used on TORX-MS1244SP10SS, TORX-PBS12150SP10SS, and $ 12.00 TORX-MS10075SS. TORXBIT27 Used on S312C14T12-630 and to adjust 400 and 900 series $ 12.00 spring-loaded hinges. TORXBIT15 Used on TORX-TKS8075Z $ 12.00 MT-806 Center punch for centering screw holes when installing hinges and countersunk hardware. $ 21.00 MTSP100 Right angle screwdriver used for installing HG-310 and HG-311 hinge/guards. $ 209.00 M29-0011-02 Installer rod for installing Molly Jack nuts with M29-0012-01 installer (8S-JN 1/4-20 nuts). (formerly MT-R-3) $76.00 M29-0012-01 Molly Jack Nut installer includes 1/4-20 installer rod. $629.00 MP-UBOX Hinge Carton. Please specify (a) Length (b) 1" x 3" (c) 1-1/2" x 3". $ 15.00 26
Product Number Screw Types Included* Quantity Each M91-0001-313 TKS1267SP10BLR 42 $ 37.00 M91-0002-313 M26-0031-01, MS10075SSBL 23 $ 82.00 M91-0002-630 M26-0031-01, MS10075SS 23 $ 80.00 M91-0003-313 S323-08R12-663 TORX-TKS14075R 2 16 $ 12.00 M91-0003-626 M91-0003-630 M91-0004-02-313 M91-0004-02-626 TORX-TKS14075R TKS8075Z TKS8075Z M22-0130-01 TORX-TKS14075R TB1420BL S222-416R16-603 TORX-TKS14075R S323-08R12-663 TB1420Z S222-416R16-603 TORX-TKS14075R TKS8075Z 16 2 2 6 16 6 6 16 2 6 6 12 2 $ 12.00 $ 19.00 $ 65.00 $ 65.00 M91-0005-630 MS10075SS, M26-0031-01 12 $ 35.00 M91-0013-628 PBS12150SP10SS, TKS1267SP10SS 9 $ 12.00 M91-0013-313 PBS12150SP10BL, TKS1267SP10BL 9 $ 14.00 M91-0020-630 PBS12150SP10SS, TKS1267SP10SS 9 $ 12.00 M91-0030MM TORX-T20MS1244BL 48 $ 58.00 M91-0030MW TORX-T20MS1244BL, TORX-T20PBS12150BL 24 $ 58.00 M91-0030WW TORX-T20PBS12150BL 48 $ 58.00 MM TORX-MS1244SP10SS 48 $ 55.00 MW TORX-MS1244SP10SS, TORX-T25PBS12150SS 24 $ 55.00 WW TORX-T20PBS12150SS 48 $ 55.00 M91-0032-630 TORX-MS1244SP10SS 24 $ 55.00 TORX-MS10075SS, M26-0031-01 23 M91-0033MM TORX-TKS1267SP10SS 48 $ 96.00 M91-0033MW TORX-TKS1267SP10SS, TORX-T20PBS12150SP10SS 24 $ 77.00 M91-0046-630 TORX-BHMS100Z, TB1420SS 11 $ 72.00 M91-0047-313 M91-0047-630 M91-0063-630 M91-0064-02-630 TORX-TKS14075R TORX-TKS8075BL TORX-TKS14075R TORX-TKS8075Z TORX-TKS8075Z TORX-TKS14075R M22-0130-01 TKS1267SP10SS MS14075TSS, TB1420SS 16 2 16 2 2 16 6 23 11 $ 36.00 $ 16.00 $ 24.00 $ 141.00 KMPBL TKS1267SP10BLR 42 $ 31.00 KMSSS TKS1267SP10SS, PBS12150SP10SS 23 $ 49.00 KMPSS TKS1267SP10SS 46 $ 24.00 screw packs - sold separately *See pages 26-27 for Screw Type Descriptions 27
fastener pricing Product Number Description Properties 12-24 x 11/16 x #10 Head, Flat Head Undercut Self-Drilling Screw TKS1267SP10SS23 (23 Pack) Stainless Steel $ 12.00 TKS1267SP10BL24 Replaces MP-10, MP-11, MP-12 (24 Pack) Black Zinc $ 14.00 TORX-TKS1267SP10SS24 (24 Pack) Stainless Steel $ 12.00 TORX-TKS1267SP10BL24 (24 Pack) Black Zinc $ 12.00 TKS8075Z S323-08R12-663 TORX-TKS8075Z #8 x 3/4" Flat Head Self-Drilling Screw Formerly MP-8; For attaching 100, 200, and 300 series covers (Per each) Formerly MP-9; For attaching 100, 200, and 300 series covers (Per each) Formerly MP-61; For attaching 100, 200, and 300 series covers (Per each) Zinc Phillips $ 2.00 Black $ 2.00 Zinc Torx $ 2.00 PBS12150SP10SS24 PBS12150SP10BL24 TORX-PBS12150SP10SS24 12-8 x 1-1/2 x #10 Head, Particle Board Screw Formerly MP-28; For edge mounting to wood (24 Pack) Formerly MP-29; For edge mounting to wood (24 Pack) Formerly MP-54; For edge mounting to wood Security Fastener with Security Pin (24 Pack) Stainless Steel $ 8.00 Black $ 9.00 Stainless Steel Torx $ 25.00 TORX-PBS12150SP10BL24 Security fastener with Security Pin (24 pack) Black Stainless Steel Torx $ 32.00 M26-0031-01 1-3/8" Adjust-A-Screw With 10-32 Internal Thread and Hex Head Adjustment Formerly MP-25; Right Hand used with MS10075 screw (Per each) Note: 5/16" pilot hole required for 3/8" - 16 tap 12 ga. reinforcement required $ 3.00 MS10075SS TORX-MS10075SS MS10075BL TORX-MS10075BL 10-32 x 3/4" Flat Head Machine Screw Formerly MP-7; Used with M26-0031-01 Adjust-A-Screw (Per each) Formerly MP-55; Used with M26-0031-01 Adjust-A-Screw (Per each) Used with M26-0031-01 Adjust-A-Screw (Per each) Used with M26-0031-01 Adjust-A-Screw (Per each) Stainless Steel $ 1.00 Phillips Stainless Steel $ 2.00 Torx Black SS $1.00 Black SS Torx $2.00 28
Product Number Description Properties 12-24 x 7/16 x #10 Head, Flat Head Undercut Machine Screw, with Security Pin, Tri-Round Threads TORX-MS1244SP10SS24 Formerly MP-52; For edge mounting to metal (24 Pack) T-25 RECESS Stainless Steel Torx $ 25.00 TORX-T20MS1244SP10BL24 (24 Pack) T-20 RECESS Black SS Torx $ 27.00 fastener pricing 3/16 x 1-1/4 Phillips Flat Head Concrete Screw TC316125 Formerly MP-60; (Per each) Zinc $ 1.50 TB1420Z4 TB1420SS TB1420BL4 TB138Z 1/4-20 x 1-5/8" Thru-bolt Formerly MP-22; For surface mounting to wood (4 pack) Formerly MP-23, replaces MP-38. For surface mounting to wood (Per each) Formerly MP-56 For surface mounting to wood (4 Pack) 1/4-20 x 1-1/4" Thru-bolt Formerly MP-24 For surface mounting to wood (Per each) Zinc Steel $ 7.00 Stainless Steel $ 11.00 Black $ 7.00 Zinc $ 2.00 8 SJN 1/4-20 Molly Jack Nut M26-0015-02 Formerly MP-20; 7/16" hole (Per each) Zinc $ 4.00 TORX-TKS14075R 1/4-20 x 3/4" Pan Head Self-Drilling Self-Tapping Screw Formerly MP-62; For surface mounting to metal (Per each) Zinc Torx $ 2.00 S222-416R16-603 TORX-MS14100Z 1/4-20 x 1" Pan Head Machine Screw Formerly MP-14; For surface mounting to metal (Per each) Formerly MP-65; For surface mounting to metal (Per each) Zinc Phillips $ 1.50 Zinc Torx $ 2.00 29
flat astragals Product Number Description Standard Finish Length FA68 Flat Astragal (each) Galvanneal For 6'8" door $ 89.00 FA70 Flat Astragal (each) Galvanneal For 7'0" door $ 89.00 FA80 Flat Astragal (each) Galvanneal For 8'0" door $ 93.00 Holes are countersunk and equally spaced 1/8" x 2" galvanneal steel Available with thru-bolt option - add $21.00 for nine-pack (ZTB-KIT9) or $24.00 for eleven-pack (ZTB-KIT11) FA68 FA70 FA80 30
edge guards order form *DRAWING SUBMITTAL AND FACTORY APPROVAL REQUIRED PRIOR TO ORDER ENTRY VAUGHAN, ON Tel: 800.461.3007 Fax: 800.461.8989 31
800-824-3018 www.markar.com current transfer prep information form To process order, please circle handing illustrated below. VAUGHAN, ON Tel: 800.461.3007 Fax: 800.461.8989 32 June 8 th, 2015
ASSA ABLOY Door Security Solutions Canada 160 Four Valley Drive Vaughan, ON L4K 4T9 T: 800-461-3007 www.assaabloy.ca Copyright 2012-2015, Pemko Manufacturing Co., an ASSA ABLOY Group Company. All Rights reserved. Reproduction in whole or in part without the express written permission of Pemko Manufacturing Co. is prohibited. ASSA ABLOY is the global leader in door opening solutions, dedicated to satisfying end-user needs for security, safety and convenience. 6/15