Rotary screw compressors kw 2,2-3 - 4-5,5 bar 10
Design and technology 1 Oil fi lter 8 Oil reservoir 15 Transmission arrangement 2 Air-oil separator fi lter 9 Air suction unit 16 Oil level 3 Oil cooler 10 Air suction air fi lter 17 Oil drain 4 Thermostatic valve 11 Screw compressor 18 Refrigerated dryer ( optional ) 5 Safety valve 12 Fan 19 Air receiver ( optional ) 6 Pressure switch 13 Electric motor 20 Condensate drain valve 7 Pressure gauge 14 Thermometer/Thermostat 6 11 10 15 3 1 2 7 18 5 9 4 8 16 17 14 13 12 Simple Lay-out A new assembly concept provides for an extremely compact, convenient and attractive design. 19 20 Compressed air Air / Oil Oil
The advantages Efficency of the Elements Air is compressed by a highly effi cient rotary screw compressor element that is designed for extremely long service life: Industrial compressor Know how Designed for industrial use Longevity: screw compressor technology ensures a longer service life due to fewer moving parts, providing reliability and durability. Easy to maintain Long service intervals along with a convenient arrangement of components, with ease of access, allow for quick, safe and cost effective maintenance. Only by removing just two panels, quick and convenient access can be gained to: - Air Filter - Oil Filter - Air-Oil Separator - Oil fill and drain Easy to operate Electric Control Board Main switch that can be activated in emergency, even if the compressor is loaded Electric motor thermal protection Low voltage control circuits Automatic star-delta start (5,5 kw std, Option 4 kw) Air delivery pressure gauge On/Off switch and emergency stop Air cooling The efficient coaxial cooling fan provides efficient cooling to all internal components within the, in order to improve efficiency and provide reliable operation. Hour meter High temperature and safety thermostat reset High oil temperature warning lamp Automatic condensate discharge It discharges only water, NO compressed air no noise energy saving.e version with dryer The E Version is the ideal solution for applications where moisture free compressed air is required: Safeguards the operation of the equipment; Improves the quality of the final product; Requires less space for installation; Avoids the cost of installing the dryer; Respects the environment with the use of ecological gas
Technical data Model Pressure bar psi Capacity m 3 min cfm Motor Power kw/hp Noise db(a) Tank capacity Liters Air output Ø Dimensions mm Lenght x Width x Height 2.210 * 10 145 0,24 8,5 2,2/3 61-3/4 620x612x950 99 310 10 145 0,32 11,3 3/4 61-3/4 620x612x950 103 410 10 145 0,47 16,6 4/5,5 62-3/4 620x612x950 105 410 ST 10 145 0,47 16,6 4/5,5 62-3/4 620x612x950 105 5.510 ST 10 145 0,60 21,2 5,5/7,5 64-3/4 620x612x950 110 2.210 200 * 10 145 0,24 8,5 2,2/3 61 200 1/2 1429x612x1255 155 310 200 10 145 0,32 11,3 3/4 61 200 1/2 1429x612x1255 157 410 200 10 145 0,47 16,6 4/5,5 62 200 1/2 1429x612x1255 159 410 200 ST 10 145 0,47 16,6 4/5,5 62 200 1/2 1429x612x1255 159 5.510 200 ST 10 145 0,60 21,2 5,5/7,5 64 200 1/2 1429x612x1255 164 2.210 270 * 10 145 0,24 8,5 2,2/3 61 270 1/2 1531x612x1349 166 310 270 10 145 0,32 11,3 3/4 61 270 1/2 1531x612x1349 168 410 270 10 145 0,47 16,6 4/5,5 62 270 1/2 1531x612x1349 170 410 270 ST 10 145 0,47 16,6 4/5,5 62 270 1/2 1531x612x1349 170 5.510 270 ST 10 145 0,60 21,2 5,5/7,5 64 270 1/2 1531x612x1349 175 Weight Kg.E with refrigerated dryer Model Pressure bar psi Capacity m 3 min cfm Motor Power kw/hp Noise db(a) Tank capacity Liters Air output Ø Dimensions mm Lenght x Width x Height.E 2.210 200* 10 145 0,24 8,5 2,2/3 61 200 1/2 1429x612x1255 187.E 310 200 10 145 0,32 11,3 3/4 61 200 1/2 1429x612x1255 191.E 410 200 10 145 0,47 16,6 4/5,5 62 200 1/2 1429x612x1255 193.E 410 200 ST 10 145 0,47 16,6 4/5,5 62 200 1/2 1429x612x1255 193.E 5.510 200 ST 10 145 0,60 21,2 5,5/7,5 64 200 1/2 1429x612x1255 198.E 2.210 270* 10 145 0,24 8,5 2,2/3 61 270 1/2 1531x612x1349 198.E 310 270 10 145 0,32 11,3 3/4 61 270 1/2 1531x612x1349 202.E 410 270 10 145 0,47 16,6 4/5,5 62 270 1/2 1531x612x1349 204.E 410 270 ST 10 145 0,47 16,6 4/5,5 62 270 1/2 1531x612x1349 204.E 5.510 270 ST 10 145 0,60 21,2 5,5/7,5 64 270 1/2 1531x612x1349 209 Weight Kg Technical data may vary without notice * Also available 230Volt / 50 Hz / single-phase ST = Start Delta starter version NOTE: - Power supply: Compressor 400Volt / 50 Hz / three phases Dryer 230 Volt / 50 Hz / single-phase SPARE PARTS Orginal Part, Your quality assurance The original part identifi cation confi rms that these components passed the specific strict test criteria. All parts are designed to match the compressor and are approved for use on the specified compressor only. They have been thoroughly tested to obtain the highest level of protection, extending the compressors lifetime and keeping the cost of ownership to an absolute minimum. No compromises are made on reliability. The use of original part certifi ed quality components ensures reliable operation and will not impact your warranty, unlike other parts. Look for your quality assurance. Code Description 2200902300 2.000 hours kit: Air filter, Oil filters 2200902301 4.000 hours kit: Air filter, oil filter, oil separator cartridge 2200902302 8.000 hours kit: Air filter, oil filter, oil separator cartridge, thermostatic valve kit, min. pressure valv kit, intake valve kit. 6215715900 Mineral refrigerant fluid Fluidtech 5 lt. 6215716000 Mineral refrigerant fluid Fluidtech 20 lt. 6215716100 Mineral refrigerant fluid Fluidtech 209 lt.
Strength in simplicity The compressor has been designed to offer all the benefits of a sophisticated, energy efficient screw compressor to the users of the traditional piston compressor technology. Piston compressor 5.5HP (4kW) 75% of intake air More than 85 db(a) For intermittent use Alternative and pulsing High level From 7 to 10 times nominal value Basic safety motor overload Comparison Installed Power Free Air Delivery ( FAD ) Noise level Operation Compression Vibrations Starting current Standard protections 4HP (3kW) 95% of the intake air From 61 to 64 db(a) Designed for continuous use Continuous and constant No vibration From 3 to 5 times nominal value (star delta version) Motor overload, High oil temperature protection Airplane Locomotive Normal factory or workshop noise compressor Normal conversation Refrigerator Whispering 20dB(A) 45dB(A) 55dB(A) 64dB(A) 85dB(A) 100dB(A) 120dB(A) Low noise levels Low noise levels which are significantly lower than that of a piston compressor provide a more comfortable working environment. The absence of vibration, low mechanical noise and the use of acoustic panels, allow the to be located closer to the working area. [only 61-64 db(a)] Flexibility The is available in many different versions to suit all applications. Basic or receiver mounted versions at 200 and 270 lt are available along with the option of added refrigerated dryer, enabling you to choose exactly the right model for any requirement. Reduced power consumption Thanks to the rotary technology that provides a higher output, the compressor consumes less power in comparison to traditional piston type air compressors. Air Delivery m 3 /min 0,6 0,42 SAVING ENERGY Piston Compressor 0,37 0,24 2,2 3 4 5,5 Power HP
CUSTOMER SERVICE A full product support package is available to all of our customers throughout the world. Qualified technical advice and support is provided in strategic locations and in all major countries. Advice on installation, selection, additional equipment, maintenance management and environmental issues is available on request. Tel. +39 0119246479 Fax: +39 0119246455 e-mail: service@abac.it BALMA product range ROTARY SCREW COMPRESSORS From 2.2 to 55 kw ( from 3,0 to 75 Hp), from 8 to 13 bar VARIABLE SPEED VERSION From 11 to 22 kw ( from 15 to 30 Hp), from 6 to 13 bar PISTON COMPRESSORS Direct drive oilfree and lubricated from 1,5 to 3 Hp, up to 100 liter air receiver, working pressure from 1 to 10 bar Belt driven, lubricated, single stage, two stage from 2 to 25 Hp, from 27 to 1000 liter air receiver, max pressure 15 bar Silenced, belt driven, single stage, two stage from 2 to 10 hp, up to 500 liter air receiver, working pressure from 1 to 11 bar Cod. 9036827-08/2009 TECHNE COMPRESSED AIR TREATMENT Refrigeration dryer from 20 to 1.260 m 3/ h Oil filters from 3 to 0,01 micron and carbon filter from 2.000 to 41.000 l/min Cyclonic separators from 126 to 8.500 m 3 /h Oil-water separators from 120 to 8.500 m 3 /h Air receiver from 100 to 5.000 liter PNEUMATIC TOOLS Full range of professional air tools for automotive, building, mechanical, wood working, nailing and stapling. Distributor Produced by: Abac aria compressa S.p.A. via Cristoforo Colombo, 3 10070 Robassomero (To) Italy Tel. +39 0119246400 Fax +39 0119241096 e-mail: abac@abac.it www.abac.it www.balma.com