JANSEN BRANDSCHUTZ Roller Doors Jansen roller doors can be used multifunctionally as permanent functional door without a higher maintenance effort. can be implemented, e. g. as counter closures and are the only fire protection roller doors authorized for higher position of installation. are available with power-operated drive only. can be used as verified soundproofing doors. Roller door HERMES tight-closing Roller door FERROSTABIL E30-120 Roller door AQUISO / PLATO T30/ EI30
ROLLER DOOR TIGHT-CLOSING HERMES To be implemented like standard industrial doors. Can be used multifunctionally as permanent functional door. Tight & self-closing. Door Leaf: The door leaf consists of singlewalled steel slats with a material thickness of 1.0 mm. The separate slats are hinge-like joined together. Steel end pieces prevent side-ways displacement of the slats. Guide Rail: The roller door is guided in revisable steel guide rails. The rolled-up door shell and the rolling shaft are cased by a covering hood. Control & Drive: A specially coordinated drive and control system (micro-processor steered lock system) which has been approved by building control is employed. Application as permanent functional door with 200,000 verified load plays (according to norm: 10,000 load plays) can be avouched for without additional maintenance effort. Due to miscellaneous independently adjustable parameters in the control our door systems can be run like standard industrial doors (see supplementary equipment). Due to battery buffering the door will be held in its current position for at least 4 hours in case of a power outage. The control as well as all other safety devices continue to be active in case of fire. Supplementary Equipment: Surface coating: Primer, colouring according to RAL, DB or NCS Material: Stainless steel version Electrical options: Impulse control, time closing Control elements: Key-operated push button, pull switch, IR-/radar motion sensor, radio, induction loop, under-glass release button Safety equipment: Flash light, light barrier, covering hood Time of Delivery: The standard version can be delivered within 5 days.
Unique: utilisation as permanent functional door (with 200,000 load plays)
ROLLER DOOR FERROSTABIL Roller door FERROSTABIL verified as E30 120. Protection against burglary through sturdy shutters. Can be used multifunctionally as permanent functional door. Door Leaf: The door leaf consists of singlewalled steel slats with a material thickness of 1.0 mm. The separate slats are hinge-like joined together. Steel end pieces prevent side-ways displacement of the slats. Guide Rail: The roller door is guided in revisable steel guide rails. The rolled-up door shell and the rolling shaft are cased by a covering hood. Control & Drive: A specially coordinated drive and control system (micro-processor steered lock system) which has been approved by building control is employed. Application as permanent functional door with 180,000 verified load plays (according to norm: 10,000 load plays) can be avouched for without additional maintenance effort. Due to miscellaneous independently adjustable parameters in the control our door systems can be run like standard industrial doors (e.g. traffic light systems, time closing, etc. see supplementary equipment). Due to battery buffering the door will be held in its current position for at least 4 hours in case of a power outage. The control as well as all other safety devices continue to be active in case of fire. Supplementary Equipment: Surface coating: Primer, colouring according to RAL, DB or NCS Material: Stainless steel version Electrical options: Impulse control, time closing Control elements: Key-operated push button, pull switch, IR-/radar motion sensor, radio, induction loop, under-glass release button Safety equipment: Flash light, light barrier Time of Delivery: The standard version can be delivered within 5 days.
Approved/ verified according to: --- / E30 E120: DIN EN 1634 Unique: utilisation as permanent functional door (with 180,000 load plays)
ROLLER DOOR AQUISO / PLATO Convinces through small space requirement and maintenance effort. AQUISO - 1st place in the German Fire Protection Award 2006. - environmentally friendly with an attractive price-performance ratio. PLATO - Suitable for larger sizes - With good insulation values and high continous function. Door Leaf: The door leaf consists of hollow section profiles with a height of 112 mm/ 121 mm. The separate slats are joined to a shell via a turnable connection system. The thickness of the elements is 35 mm/ 48 mm. The surface is sheer aluminium/ galvanized steel. Guide Rail: The guide rail consists of zinc-coated sheet steel in a screwed construction. The width is 115 mm. Higher Position of Installation: As Europe s only manufacturer of fire protection doors is Jansen able to offer authorized roller doors as counter closures in the fire resistance class T30/ EI30. These doors are mounted in a higher position of installation. Control & Drive: A specially coordinated drive and control system (micro-processor steered lock system) which has been approved by building control is employed. Application as permanent functional door with 180,000 verified load plays (according to norm: 10,000 load plays) can be avouched for without additional maintenance effort. Due to miscellaneous independently adjustable parameters in the control our door systems can be run like standard industrial doors (see supplementary equipment). Due to battery buffering the door will be held in its current position for at least 4 hours in case of a power outage. The control as well as all other safety devices continue to be active in case of fire. Supplementary Equipment: Surface coating: Primer, colouring according to RAL, DB or NCS Electrical options: Impulse control, time closing Control elements: Key-operated push button, pull switch, IR-/radar motion sensor, radio, induction loop, under-glass release button Safety equipment: Flash light, light barrier Time of Delivery: The standard version can be delivered within 5 days.
The only approved fire protection roller doors for higher position of installation, e. g. as counter closures. Approved/ verified according to: AQUISO T30: DIN 4102/ EI30: DIN EN 1634 PLATO T30: DIN 4102/ EI30: DIN EN 1634 Unique: utilisation as permanent functional door (with 180,000 load plays)
Maintenance and Service The name Jansen does not only stand for innovative products and varied special solutions in the area of fire protection, but also offers their customers comprehensive and individual service not only for their own door systems but also for those of other manufacturers. Our intensive on-site customer support is carried out by skilled professional personnel. Hereby we can guarantee the highest level of safety for your door systems. Assembly Apart from the delivery of door systems Jansen naturally also carries out the assembly and installation of the products. Due to our own skilled assembly operators Jansen guarantees a smooth implementation from the actual installation via the electronical installation up to the acceptance inspection. Inspection & Maintenance All-around one-stop service means that Jansen not only takes care of the compulsory inspection for door systems (according to inspection regulations of the respective federal state and the rule of the professional association) but also offers additionally the maintenance of the door systems on request. Customers thus not only save money but also a considerable amount of time. The difference between maintenance and inspection is that for maintenance additional work routines according to the manufacturer s guidelines are carried through for the preservation of performance properties. After completion of the respective maintenance or inspection the customer receives an inspection record in which all implemented work routines as well as possible faults are stated. For fire-protection closures with lock systems, the operator is obliged to periodical monitoring through qualified persons according to the guidelines for lock systems, published by the German Institute for Constructional Engineering in Berlin. Furthermore the performance of fire-protection door systems with lock systems has to be checked by the operator. Repair In order to rectify any problems as quickly as possible the competent staff will be pleased to be of service to you any time. Just contact Jansen. They will help you quickly and without long waiting periods. Jansen Brandschutz GmbH & Co. KG Am Wattberg 51 26903 Surwold Phone: +49 (0) 49 65 / 89 88-0 Fax: +49 (0) 49 65 / 89 88-88 info@jansentore.com www.jansentore.com