Arman Mohseni C u r r i c u l u m V i t a e Qualification Flow measurement and performance test of turbomachines Design of turbomachine test stands Design and development of compressible-flow turbomachines Endoscopic Stereoscopic Particle Image Velocimetry (ESPIV) Programming data acquisition systems Computational Fluid Dynamics (CFD) Stress analysis and supporting of industrial piping systems Experience in working with industrial project documents (preparation, evaluation, modification) including mechanical drawings, plot plan, piping plan, P&ID, PFD, standards, specifications, and document control, registration, and management Ability to work independently and effectively both individually and within a team Attention to details, logical structure, reliability, accuracy, special cases, external effects, environmental effects, safety requirements (personnel, environmental, device), life-time assessment (individual, assembly), future extensions Organizational skills to self-schedule detailed tasks to meet deadlines Structured and multiple-approach problem solving skills Experience Jan. 2013 Present Apr. 2011 Jun. 2012 Feb. 2007 Feb 2010 Assistant Professor, Faculty of Mechanical and Energy Engineering, Power and Water University of Technology (PWUT), East Vafadar Blvd., Tehranpars, Tehran, Iran, URL: http://www.pwut.ac.ir. Fields of activity and specialization: Turbomachinery, Measurement Techniques, Computational Fluid Dynamics, Theoretical and Applied Fluid Mechanics. Head of Measurement and Test Dpt., Test Integration, System Group, Middle East Turbo Compressor Tech. Co. (TurboTec), Tehran, Iran. Head of measurement and test department and consultant on gas turbine test-stand design. Major activities include team arrangement and personnel training; preparation of design documents and procedures; design of measurement and test system for an industrial gas turbine in an EPCC project. Responsible for Centrifugal Compressor Test Facility (GRV), Institute of Turbomachinery and Fluid-Dynamics (TFD), Faculty of Mechanical Engineering, Leibniz Universität Hannover, Hannover, Germany, URL: www.tfd.uni- Hannover.de. Responsible for the test stand consisting of electrical, mechanical, control and operation instrumentation, and measurement systems; preparation of as-built drawings; upgrading the control and operation instrumentation of the test stand. arman_mohseni@pwut.ac.ir Issue Date: 2013-04-23 1/10
May 2004 Jan. 2006 Dec. 2002 Jun. 2003 Mar. 2001 Dec. 2002 Oct. 2000 Feb. 2001 Deputy Manager, Iran Central Oil Fields Co. (ICOF), National Iran Oil Co. (NIOC), Dalan, Shiraz, Iran. Deputy manager of Dalan central workshop at Dalan gas production plant in a 14 days cycle schedule. The workshop provides service to mechanical, electrical, instruments, operation, and pipe-line work groups of the plant. A selection of activities include personnel and work flow management; service and test of pressure safety valves up to 400 bar(g); design, modification, repair, and construction of various mechanical components including installation and commissioning of workshop machinery (including lathe and milling machines); design and construction of skid and enclosure for a 660 kva portable diesel generator set; design and construction of workshop fire hydrant piping; preparation of as-built drawings for the plant main inlet piping. Lead Mechanical Engineer, Coordinator of Supporting and Stress Analysis of Piping, Enerchimi Engineering Co., Tehran, Iran. Coordinator of piping stress analysis and pipe supporting of Linear Alkylbenzene (LAB) process plant design project of Bistoon Petrochemical Complex (Kermanshah, Iran) in joint venture with Tecnicas Reunidas Co. (Spain). Responsible for the supporting and stress analysis of main process unit of the plant including piping for Hydrofluoric acid with pipe sizes up to 42 at 420 C. Analysis of piping under operational, design, hydro-test or air-test, and seismic loading with the inclusion of equipment and structure movements in accordance with ASME and API standards. Lead Mechanical Engineer, Supporting and Stress Analysis of Piping, Palafarayand Co., Tehran, Iran. Responsible for the piping stress analysis and pipe supporting of NGL1300 natural gas liquid plant design project for processing 180 MMSCFD rich sour gas (Bibi Hakimeh region, Iran), including acid gas compression (centrifugal, up to 24 ), Glycol, Methanol injection, condensate stabilization, and utility units in accordance with ASME and API standards. Involved in the piping stress analysis and supporting of PET II project. Mechanical Engineer, Supporting and Stress Analysis of Piping, Sazeh Consultant Engineers, Tehran, Iran. Responsible for the piping stress analysis and pipe supporting of 3rd Methanol Plant design project in cooperation with Snamprogetti Co. (Italy), including above-ground piping of pipe-rack, pipe-rack mounted air-coolers, flare, equipment, pumps, towers, and tanks in accordance with ASME and API standards. Dec. 2006 Mar. 2010 Education Ph.D., Institute of Turbomachinery and Fluid-Dynamics (TFD), Faculty of Mechanical Engineering, Leibniz Universität Hannover, Hannover, Germany, URL: www.tfd.uni-hannover.de. Fields of Activity: Flow and performance measurement in centrifugal compressor by Particle Image Velocimetry (PIV) and 5-hole aerodynamic pressure probes; development of a distortion compensation method in digital images for PIV data analysis; development of a method for the field-calibration of measurement instruments under quasi-steady conditions Graduation: March 2010 Grade: sehr gut (very good) Dissertation: Development of Endoscopic Stereoscopic PIV (Particle Image Velocimetry) for Investigating the IGV-Impeller Interaction in a Centrifugal Compressor arman_mohseni@pwut.ac.ir Issue Date: 2013-04-23 2/10
Sept. 1997 Sept. 2000 Sept. 1992 Sept. 1997 Sept. 1988 Sept. 1992 Master of Science, M.Sc., Department of Mechanical Engineering, Faculty of Engineering, University of Tehran, Tehran, Iran, URL: eng.ut.ac.ir. Field-Major: Mechanical Engineering Energy Conversion Graduation: September 2000 G.P.A.: 16.36 out of 20 Thesis: Solution of two dimensional Navier-Stokes equations using multi-block scheme Bachelor of Science, B.Sc., Faculty of Mechanical Engineering, Iran University of Science and Technology, Tehran, Iran, URL: mech.iust.ac.ir. Field-Major: Mechanical Engineering Heat and Fluid Mechanics Graduation: September 1997 G.P.A.: 17.14 out of 20 Final Project: Design and calculation of a magnetohydrodynamic mercury pump with 1 kw nominal power and 0.1 bar pressure head High School, Dr. Ali Shariati High School, Behbahan, Iran. Field: Mathematics and Physics Graduation: June 1992 G.P.A.: 18.90 out of 20 Apr. 1 3, 2008 Nov. 8, 2007 Mar. 8 10, 2005 Mar. 5 7, 2005 Feb. 15 17, 2005 Dec. 26 27, 2004 Training Certificate of attendance, ANSYS Workbench TurboSystem for Turbomachinery Application including Fluid-Structure Coupling, Institute of Turbomachinery and Fluid-Dynamics (TFD), Faculty of Mechanical Engineering, Leibniz Universität Hannover, Hannover, Germany, URL: www.tfd.uni-hannover.de. Focus of the seminar: ANSYS Workbench, ANSYS CFX, ANSYS Simulation for Turbomachinery Applications Course Language: German Certificate of attendance, Brandschutzseminar (Seminar on Fire Protection), Institute of Turbomachinery and Fluid-Dynamics (TFD), Faculty of Mechanical Engineering, Leibniz Universität Hannover, Hannover, Germany, URL: www.tfd.uni-hannover.de. Certificate of attendance, Fitness for service (FFS) assessment, based on API RP 579, by The Welding Institute (TWI), held at the Research Institute of Petroleum Industry (RIPI), Tehran, Iran. Course Language: English Certificate of attendance, Risk-based inspection (RBI), based on API RP 580, by The Welding Institute (TWI), held at the Research Institute of Petroleum Industry (RIPI), Tehran, Iran. Course Language: English Final course examination successfully passed with the mark 89/100 Training course, Professional hygiene and health, safety, and environment (HSE), held at Dalan operating zone, Iran Central Oil Fields Co. (ICOF), National Iran Oil Co. (NIOC), Iran. Course Language: Persian Certificate of training, for attending the training course Principles of control and calibration of measurement instruments in accordance to ISO9001:2000, by Global Management Pioneers (GMP), Shiraz, Iran. Course Language: Persian arman_mohseni@pwut.ac.ir Issue Date: 2013-04-23 3/10
Nov. 27 Dec. 2, 2004 Sept. 25, 2004 Nov. 26, 2004 Nov. 29, 2003 May 7, 2004 Training course, An introduction to Timar2000 software for preventive maintenance (PM), held at Dalan operating zone, Iran Central Oil Fields Co. (ICOF), National Iran Oil Co. (NIOC), Iran. Course Language: Persian Applied training courses, by Iran Central Oil Fields Co. (ICOF), National Iran Oil Co. (NIOC), Mahmood-Abad, Iran. Courses language: Persian Total training hours: 155 hr theoretical and 55 hr practical Course Subjects: 1. Pressure vessels 2. Corrosion and methods for corrosion control 3. Industrial vibration and balancing of machinery 4. Basic industrial hydraulics 5. Welding and weld defects General and basic training courses, by Iran Central Oil Fields Co. (ICOF), National Iran Oil Co. (NIOC), Mahmood-Abad, Iran. Courses language: Persian Total training hours: 465 hr theoretical and 45 hr practical Selected Course Subjects: 1. Safety and fire fighting 2. Industrial hygiene 3. Labor treatment 4. Introduction to standards and codes used in oil and gas industries 5. Introduction to oil and gas production process 6. Introduction to oil and gas wells and reservoir 7. Introduction to natural gas liquid (NGL) process 8. Introduction to electrical engineering 9. Introduction to instrumentation 10. Electric safety Nov. 2008 Jun. 2006 Nov. 2009 Sept. 1997 Awards and Achievements Design and construction, Iran Central Oil Fields Co. (ICOF), National Iran Oil Co. (NIOC), Dalan, Shiraz, Iran. Reward for the design and construction of the displacer of a level indicator and controller in a high pressure Ethylene Glycol separator tank. Scholarship, German Academic Exchange Service (DAAD). Scholarship for Ph.D. studies during 3.25 years First rank between graduates (B.Sc.), Iran University of Science and Technology, Tehran, Iran, URL: mech.iust.ac.ir. Publications Book 2011 Mohseni, A., Development of Endoscopic Stereoscopic PIV for Investigating the IGV-Impeller Interaction in a Centrifugal Compressor, Südwestdeutscher Verlag für Hochschulschriften, ISBN: 978-3-8381-2394-3, 2011. In Progress Journal Paper Mohseni, A., Seume, J. R., Distortion Compensation of Endoscopic Stereoscopic PIV Records Using Partial Differential Equations. In Progress. arman_mohseni@pwut.ac.ir Issue Date: 2013-04-23 4/10
Mar. 2012 Mohseni, A., Goldhahn, E., Van den Braembussche, R. A., and Seume, J. R., Novel IGV designs for centrifugal compressors and their interaction with the impeller. ASME Journal of Turbomachinery, Vol. 134, Issue 2, 021006 (8 pages), Mar. 2012, DOI:10.1115/1.4003235. (ISI Journal Q3). Jan. 2012 Jun. 2010 May 2004 Dec. 2000 Conference Paper Mohseni, A., On the Technical Aspects of the Application of PIV in Turbomachinery, Iran Rotate 2011, 3rd Conference on Rotating Equipment in Oil & Power Industries, Jan. 2 3, 2012, Razi Intl. Conference Center, Tehran, Iran. Mohseni, A., Goldhahn, E., Van den Braembussche, R. A., and Seume, J. R., Novel IGV designs for centrifugal compressors and their interaction with the impeller. ASME Turbo Expo 2010: Power for Land, Sea and Air, GT2010, June 14 18, 2010, Glasgow, UK. Mirahmadi, A. and Mohseni, A., Linear Direct Current Magnetohydrodynamic Pump, 8th international and 12th annual conference of mechanical engineering, ISME2004, May 19 21, 2004, Tarbiat Modares University, Tehran, Iran. (In Persian). Esfahanian, V. and Mohseni, A., Solution of two dimensional Euler equations with Beam-Warming method using multi-block scheme, First international and third biannual conference of the Iranian Aerospace Society, AERO2000, Dec. 30, 2000 to Jan. 1, 2001, Sharif University of Technology, Tehran, Iran. (In Persian). May 2012 Apr. 2012 Feb. 2012 Technical Documents (In the following TFD stands for the Institute of Turbomachinery and Fluid Dynamics of Leibniz Universität Hannover, Hannover, Germany.) Mohseni, Arman; Alihosseini, A.; and Shakeri, H., TSMT Quality Assurance Handbook, Technical Specification, Measurement and Test Dept. (TSMT), Test Integration, System Group, Middle East Turbo Compressor Tech. Co. (Turbo Tech.), Rev. 01, May 2012. Mohseni, Arman, TSMT Numbering Procedure for Measurement and Test Instruments, Technical Specification, Measurement and Test Dept. (TSMT), Test Integration, System Group, Middle East Turbo Compressor Tech. Co. (Turbo Tech.), Rev. 07, 2012-04-19. Mohseni, Arman, TSMT Specification for the Instrument Air Supply System of the Full Engine Test Stand TS1, Technical Specification, Measurement and Test Dept. (TSMT), Test Integration, System Group, Middle East Turbo Compressor Tech. Co. (Turbo Tech.), Rev. 01, 2012-02-06. Oct. 2010 Mohseni, Arman; and Seume, Joerg R., Centrifugal Compressor Test Facility Hannover, Performance evaluation of closed-loop air-cooler (E01), Technical Report, TFD internal document, Rev. 02, 2010-10-01. Feb. 2010 Mohseni, Arman; Bartelt, Michael; and Seume, Joerg R., Centrifugal Compressor Test Facility Hannover, Geometry Calculations, VKI-Impeller, Technical Report, TFD internal document, Rev. 01, 2010-02-22. arman_mohseni@pwut.ac.ir Issue Date: 2013-04-23 5/10
Feb. 2010 Mohseni, Arman; and Seume, Joerg R., Centrifugal Compressor Test Facility Hannover, Calculation of Axial Thrust (Axialschub) and Required Balancing Pressure, Technical Report, TFD internal document, Rev. 01a, 2010-02-22. Feb. 2010 Mohseni, Arman; and Seume, Joerg R., Centrifugal Compressor Test Facility Hannover, GRV Geometry Description (Nabe), Technical Report, TFD internal document, Rev. 01a, 2010-02-22. Feb. 2010 Mohseni, Arman; and Seume, Joerg R., Centrifugal Compressor Test Facility Hannover, Open- and Closed-loop Operation, TFD internal document, Rev. 01a, 2010-02-22. Sept. 2009 Other Bartelt, M., Mohseni, A., Opilat, V., and Seume, J. R., Endoscopic stereoscopic PIV for turbomachinery applications, poster in 25 Years of Particle Image Velocimetry in Aerodynamics, Sept. 23 25, 2009, DLR Center Göttingen, Germany. Jan. 2013 Present Nov. 19 20, 2012 Jan. 2008 Mar. 2009 Teaching/Lecturing Lectures: Hydroelectric Power Plants, Mechanical and Electrical Equipments of Hydroelectric Power Plants, Fluid Mechanics I, Faculty of Mechanical and Energy Engineering, Power and Water University of Technology (PWUT), East Vafadar Blvd., Tehranpars, Tehran, Iran, URL: http://www.pwut.ac.ir. Two-days workshop An Introduction to Advanced Measurement Techniques in Mechanical Engineering, at Mechanical Engineering Dept., Faculty of Technology and Engineering, Shahrekord University, Shahrekord, Iran. Course Subjects: 1. Measurement of Geometric Dimensions; 2. Pressure Measurement; 3. Temperature Measurement; 4. Velocity Measurement; 5. Density Based Techniques; 6. Data Acquisition (DAQ) Systems; 7. Applications: 2-Component Particle Image Velocimetry, Background-Oriented Schlieren Technique Course Level: Introductory Course Language: Slides in English, Presentation in Persian Teaching assistant Strömungsmaschinen I (Turbomachinery I), Institute of Turbomachinery and Fluid-Dynamics (TFD), Faculty of Mechanical Engineering, Leibniz Universität Hannover. Course Language: German Jun. 2008 and Jun. 2009 Gas turbine laboratory, Allgemeines Maschinenlaboratorium AML, Institute of Turbomachinery and Fluid-Dynamics (TFD), Faculty of Mechanical Engineering, Leibniz Universität Hannover. Course Language: German arman_mohseni@pwut.ac.ir Issue Date: 2013-04-23 6/10
Jun 25 27, 2005 Three-days course Piping Stress Analysis and an Introduction to Pipe Supporting, at Iran Central Oil Fields Co. (ICOF), Shiraz, Iran. Course Topics: 1. Introduction to piping stress analysis and pipe supporting in piping design projects 2. Project documents required for stress analysis and supporting of piping systems 3. Duties of piping stress analysis and pipe supporting team 4. Documents and reports generated by piping stress analysis and pipe supporting team 5. An introduction to pipe supports and pipe support symbols 6. Piping stress analysis by CAESAR II ver. 4.5 software Course Schedule: three hours per day (total 10 hours) Course Language: Persian Language Skills English Language Fluent in speaking, reading, and writing Apr. 7, 2002 Apr. 6, 2002 Feb. 7, 2002 Nov. 6, 1999 GRE: General Test, Dubai, United Arab Emirates. Test Date: Apr. 7, 2002 Test Scores: 1. Verbal: 310 2. Quantitative: 800 3. Analytical: 510 TOEFL: Test of English as a Foreign Language, Dubai, United Arab Emirates. Test Date: Apr. 6, 2002 Test Scores: Computer-based test score (equivalent paper-based test score) 1. Listening: 22 (56 to 57) 2. Structure/Writing: 25 (59 to 60) 3. Reading: 23 (57) 4. Essay: 4.5 5. Total Score: 233 (577) Certificate of English language course, from the Georgian College of Applied Arts and Technology for completion of the course: English as a Second Language Advanced, with 425 hours of instruction, Tehran, Iran. TOLIMO (test of English language), Tehran, Iran. Test Date: Nov. 6, 1999 Test Scores: TOLIMO scaled scores 1. Listening: 49 2. Structure: 51 3. Reading: 45 4. Total: 483 5. Universal Percentile Rank: 37 German Language Fluent in speaking and reading, and good at writing arman_mohseni@pwut.ac.ir Issue Date: 2013-04-23 7/10
Oct. 9 Nov. 29, 2006 Aug. 7 Sept. 27, 2006 Jun. 6 Jul. 27, 2006 Summer 1999 Certificate of attendance, German language course: Intensivkurs I8 C1.2, 175 45 min., Goethe-Institute, Göttingen, Germany. Certificate of attendance, German language course: Intensivkurs I8 B2.2, 175 45 min., Goethe-Institute, Göttingen, Germany. Certificate of attendance, German language course: Intensivkurs I8 B2.1, 173 45 min., Goethe-Institute, Göttingen, Germany. Sprachkurszeugnis (Certificate of language course), Sommer-Intensiv- Semester 1999, 100-stündigen Deutschkurs, Grundstufe I (G1), Österreichisches Kulturinstitut Teheran, Tehran, Iran. Grade: sehr gute (very good) First rank in the class Programming Software Platforms Feb. Mar., 2013 Jan. Mar., 2013 Nov. Dec., 2011 Nov. 2010 Feb. 2011 May Dec. 2009 Aug. 2008 Jul. 2009 Jul. 2009 Computer Skills C/C++, Delphi (Pascal), FORTRAN, AutoLISP, and Visual Basic Application (VBA), GIMP (an open-source software for image processing) Script, DOS CAESAR II, AutoCAD, VEE Pro, Solid-Edge, NX (Unigraphics), Tecplot, Maple, Mathematica, AutoPlant, PivView (for PIV data analysis), Adobe Photoshop, GIMP, ANSYS CFX, LaTeX, XeTeX, TeX, Microsoft Office Windows, Linux Activities Reviewer, Experiments in Fluids (Journal), Springer. Review of one journal paper. Data Processing. Programming and processing of eye movement measurement data in nystagmus patients. Reviewer, ASME Turbo Expo June 11 15, 2012, Copenhagen, Denmark. Review of two conference papers submitted to technical committee 38 Turbomachinery: Radial Turbomachinery Aerodynamics, session 38-1 Centrifugal Compressors I (Design, Methods). Reviewer, ASME Turbo Expo June 6 10, 2011, Vancouver, Canada. Review of one conference paper submitted to technical committee 33 Turbomachinery: Radial Turbomachinery. Method Development, Inst. of Turbomachinery and Fluid-Dynamics (TFD), Fac. of Mech. Eng., Leibniz Uni. Hannover, Hannover, Germany. Development of a calibration and error estimation procedure under quasi-steady conditions for flow measurements by 5-hole aerodynamic pressure probes. Method Development, Inst. of Turbomachinery and Fluid-Dynamics (TFD), Fac. of Mech. Eng., Leibniz Uni. Hannover, Hannover, Germany. Development of a novel method for distortion compensation and reconstruction of digital images for the endoscopic stereoscopic PIV measurements in the centrifugal compressor test facility at the TFD. Turbomachinery Flow Measurement, Inst. of Turbomachinery and Fluid- Dynamics (TFD), Fac. of Mech. Eng., Leibniz Uni. Hannover, Hannover, Germany. Flow measurement by endoscopic stereoscopic PIV and 5-hole aerodynamic pressure probes at the inlet of the centrifugal compressor test facility at the TFD. arman_mohseni@pwut.ac.ir Issue Date: 2013-04-23 8/10
Jun. 2009 Turbomachinery Performance Measurement, Inst. of Turbomachinery and Fluid-Dynamics (TFD), Fac. of Mech. Eng., Leibniz Uni. Hannover, Hannover, Germany. Performance measurement of the centrifugal compressor test facility at the TFD. Mar. Jun. 2009 Nov. 2008 May 2009 Nov. 2007 May 2009 Aug. Sept. 2008 Jul. 2007 Jul. 2008 Jan. 2006 Mar. 2006 Jul. 2005 Jul. 2004 May 2005 Measurement System Programming, Inst. of Turbomachinery and Fluid- Dynamics (TFD), Fac. of Mech. Eng., Leibniz Uni. Hannover, Hannover, Germany. Programming the measurement system of the compressor test facility at the TFD for flow and performance measurements. Test Facility Overhaul, Inst. of Turbomachinery and Fluid-Dynamics (TFD), Fac. of Mech. Eng., Leibniz Uni. Hannover, Hannover, Germany. Major overhaul of the instruments system of the centrifugal compressor test facility at the TFD. Design and Construction of Measurement System, Inst. of Turbomachinery and Fluid-Dynamics (TFD), Fac. of Mech. Eng., Leibniz Uni. Hannover, Hannover, Germany. Design, construction, installation, and calibration of an endoscopic stereoscopic PIV measurement system for flow investigation at the inlet of the centrifugal compressor test facility. Adjustment of a Nd:YAG Two-Cavity Pulsed Laser, Inst. of Turbomachinery and Fluid-Dynamics (TFD), Fac. of Mech. Eng., Leibniz Uni. Hannover, Hannover, Germany. Adjustment of the two cavity 400 mj/pulse Nd:YAG laser of the portable PIV measurement system. Preparation of As-Built Drawings for a Compressor Test Facility, Inst. of Turbomachinery and Fluid-Dynamics (TFD), Fac. of Mech. Eng., Leibniz Uni. Hannover, Hannover, Germany. Preparation of as-built drawings and documentation for the centrifugal compressor test facility of the TFD. Lecture on Applied AutoCAD, Tehran, Iran. Preparation of an applied AutoCAD course. Workshop Machinery Installation, Iran Central Oil Fields Co. (ICOF), National Iran Oil Co. (NIOC), Dalan, Shiraz, Iran. Design and Construction, Iran Central Oil Fields Co. (ICOF), National Iran Oil Co. (NIOC), Dalan, Shiraz, Iran. Design and construction of skid and cabinet for a 660 kva portable diesel-generator set. 2002 Software Development, Tehran, Iran. Development of an application for pipe supporting calculations. 2000 Method Development, Dept. of Mech. Eng., Fac. of Eng., Uni. of Tehran, Tehran, Iran, URL: eng.ut.ac.ir. Development of a new two and three dimensional elliptic grid generation scheme with arbitrary grid clustering at all boundaries and inside of solution domain. (Appendix B of the M. Sc. thesis). 1998 2000 Computational Fluid Dynamics, Dept. of Mech. Eng., Fac. of Eng., Uni. of Tehran, Tehran, Iran, URL: eng.ut.ac.ir. Finite difference method programming of subsonic, transonic, and supersonic flows with Delphi (Pascal) and FORTRAN. arman_mohseni@pwut.ac.ir Issue Date: 2013-04-23 9/10
Interests Theoretical and experimental research in different fields of fluid mechanics and heat transfer Research and development of turbomachinery including aero-thermal design and optimization, computational fluid dynamics and heat transfer, transient fluid phenomena, fluid-structure interaction Measurement techniques in fluid mechanics Industry oriented research and providing solutions to industrial problems Turbulence and flow induced vibration Mechanical design and construction Lecturing academic courses arman_mohseni@pwut.ac.ir Issue Date: 2013-04-23 10/10