P.O. Box 554 2665 ZN Bleiswijk Brandpuntlaan Zuid 16 2665 NZ Bleiswijk The Netherlands +31 88 3473 723 nederland@efectis.com OF REACTION TO FIRE PERFORMANCE IN ACCORDANCE WITH EN 13501-1:2007+A1:2009 Classification no. Sponsor Product name P.O. Box 70 5750 AB DEURNE Linnen uni Wall covering Prepared by Efectis Nederland BV Notified body no. 1234 Author(s) C.C.M. Steinhage B.Sc. A.J. Lock Project number 2014444 Date of issue Number of pages 5 All rights reserved. No part of this publication may be reproduced and/or published without the previous written consent of Efectis Nederland. Submitting the report for inspection to parties who have a direct interest is permitted. In case this report was drafted on instructions, the rights and obligations of contracting parties are subject to either the Standard Conditions of Efectis Nederland or the relevant agreement concluded between the contracting parties. 2015 Efectis Nederland BV Page 1 / 5
1. INTRODUCTION This classification report defines the classification assigned to Linnen uni wall covering in accordance with the procedures given in EN 13501-1:2007+A1:2009. 2. DETAILS OF CLASSIFIED PRODUCT 2.1 GENERAL The product, Linnen uni wall covering, is defined as a wall covering. 2.2 MANUFACTURER P.O. Box 70 5750 AB DEURNE 2.3 PRODUCT DESCRIPTION According to the sponsor the product is from inside out composed of: Fabric laminated to a paper backing Composition fabric: 97% linnen / 3 % polyester Mass fabric : 210 g/m 2 Total mass: 350 g/m 2 3. REPORTS, RESULTS AND CRITERIA IN SUPPORT OF THIS 3.1 REPORTS Name of Laboratories Name of sponsor Report ref. no. Test method Efectis Nederland BV 2015-Efectis-R0000020 2015-Efectis-R0000021 EN ISO 11925-2:2010 EN 13823:2014 This report consists of five pages and may only be used in its entirety. Page 2 / 5
3.2 TEST RESULTS Test method and test number EN ISO 11925-2 surface flame impingement Edge flame impingement EN 13823 Parameter No. tests Continuous parameter mean (m) Results Compliance with parameters Fs 150 mm 6 39 - Ignition of filter paper - Compliant Fs 150 mm 6 28 - Ignition of filter paper - Compliant FIGRA 0.2MJ [W/s] 3 80 - FIGRA 0.4MJ [W/s] 55 - THR 600s [MJ] 2.2 - LFS < edge - Compliant SMOGRA [m 2 /s 2 ] 0.0 - TSP 600s [m 2 ] 35 - Flaming debris - flaming 10 s - flaming > 10 s - Compliant Compliant 3.3 CRITERIA Classification criteria Class Test method(s) EN ISO 11925-2 Exposure = 30 s EN 13823 Additional classification Fire classification of construction products and building elements Excluding floorings and linear pipe thermal insulation products B C D F s 150 mm within 60 s Ignition of the paper in EN ISO 11925-2 results in a d2 classification. FIGRA 0.2 MJ 120 W/s LFS < edge of specimen THR 600s 7.5 MJ FIGRA 0.4 MJ 250 W/s LFS < edge of specimen THR 600s 15 MJ Smoke production s1 = SMOGRA 30 m 2 /s 2 and TSP 600s 50 m 2 ; s2 = SMOGRA 180 m 2 /s 2 and TSP 600s 200 m 2 ; s3 = not s1 or s2 Flaming Droplets/particles FIGRA 0.4 MJ 750 W/s d0 = no flaming droplets/ particles in EN 13823 within 600 s; d1 = no flaming droplets/ particles persisting longer than 10 s in EN 13823 within 600 s; d2 = not d0 or d1. This report consists of five pages and may only be used in its entirety. Page 3 / 5
4. AND FIELD OF APPLICATION 4.1 REFERENCE OF This classification has been carried out in accordance with clause 11 of EN 13501-1:2007+ A1:2009. 4.2 The product, Linnen uni wall covering, in relation to its reaction to fire behaviour is classified: The additional classification in relation to smoke production is: The additional classification in relation to flaming droplets / particles is: B s1 d0 Reaction to fire classification: B s1, d0 4.3 FIELD OF APPLICATION This classification is valid for the following product parameters: Surface density Fabric Total 210 g/m 2 350 gg/m 2 This classification is valid for the following end use applications: Substrate Air gap Methods and means of fixing Joints Other aspects of end use conditions Non-combustible (class A1/A2 according to EN 13238:2010) Not applicable The wall covering was glued on the substrate according to the manufacturer s instructions, using the special adhesive Vescom 2000 Vertical joints only Wall covering 4.4 DURATION OF THE VALIDITY OF THIS REPORT There are no limitations in time on the validity of this report. This report consists of five pages and may only be used in its entirety. Page 4 / 5
5. LIMITATIONS This classification document does not represent type approval or certification of the product. C.C.M. Steinhage B.Sc. Project leader reaction to fire A.J. Lock Project leader reaction to fire This report consists of five pages and may only be used in its entirety. Page 5 / 5