Stainless Steel Storage Cabinets CMP has been manufacturing Stainless Steel Storage Cabinets for over 60 years. Our Storage Cabinets are fabricated to the highest standards and offer an array of storage solutions. CMP Storage Cabinets can be found in almost every hospital in the U.S. and can be configured for your unique requirements. CMP is so confident in our quality and craftsmanship that we offer a two year labor and six year parts warranty. Features: Stainless Steel Construction Glass doors with ¼ thick safety glass Many Sizes Available Heavy Duty Door Hardware Stainless steel double pan solid doors Warming Cabinets Optional Door Locks Desk Cabinets with drawers Adjustable Shelves Pegboard Computer Charting Workstations Pass-Through Feature Sliding Glass Doors Nurse Documentation Stations Catheter Slides Optional Storage Baskets Recessed or Freestanding Installation Media Cabinet Custom Sizes Available Optional Casters Continental Metal Products Co., Inc. P.O. Box 2295, 35 Olympia Avenue, Woburn, MA 01888 Phone (781) 935-4400 FAX (781) 935-4404 www.continentalmetal.com cmpwbn@gis.net
Stainless Steel Storage Cabinets Models: Surgical Table Accessory Cabinet (SC1 Series) Stainless steel accessory cabinet with pegboard and hooks Hinged stainless steel double pan doors Available 24, 36, 42 or 48 wide x 60, 72 or 80 high x 18, 20 or 24 deep Model Designation: SC1-WH-D where W=width, H=height, D=depth Example: SC1-4860-18 is a 48 wide x 60 high x 18 deep unit General Storage Cabinet (SC2 Series) Stainless steel storage cabinet with adjustable shelves Hinged glass doors, hinged stainless steel double pan doors or sliding glass doors Available 30, 36, 42 or 48 wide x 60, 72 or 80 high x 18, 20 or 24 deep Model Designation: SC2-WH-D where W=width, H=height, D=depth Example: SC2-4860-18 is a 48 wide x 60 high x 18 deep unit Desk Cabinet (SC3 Series) Stainless steel desk cabinet with writing surface and drawers Available 24 or 36 wide x 60 or 72 high x 18 or 24 deep Model Designation: SC3-WH-D where W=width, H=height, D=depth Example: SC3-2460-18 is a 24 wide x 60 high x 18 deep unit Custom Sizes Available Continental Metal Products Co., Inc. P.O. Box 2295, 35 Olympia Avenue, Woburn, MA 01888 Phone (781) 935-4400 FAX (781) 935-4404 www.continentalmetal.com cmpwbn@gis.net
Stainless Steel Storage Cabinets Models: Miscellaneous Supply Cabinet (SC4 Series) Stainless steel storage cabinet with adjustable shelves Hinged glass door or hinged stainless steel double pan door Available 24 or 30 wide x 60, 72 or 80 high x 18, 20 or 24 deep Model Designation: SC4-WH-D where W=width, H=height, D=depth Example: SC4-2460-18 is a 24 wide x 60 high x 18 deep unit Also available as Media Cabinet with louvered front door, rack rails for electronic equipment, electrical outlets and wire routing holes Warming Cabinet (DSC5 or DSW2AE Series) Stainless steel warming cabinet with two compartments Stainless steel doors or Thermopane glass doors DSC5 available 24 or 30 wide x 60 high x 18 or 24 deep DSW2AE available 30 wide x 72 high x 21 or 27 deep (outside dimensions) Model Designation: DSC5-W60-C-D where W=width, D=depth Model Designation: DSW2AE-C-D where C=# of heated compartments and D=inside depth (18 or 24 ) Computer Charting Workstation (SC6 Series) Stainless steel cabinet with counter, two drawers and storage cabinet for using and storing computer equipment Electrical outlets and wire routing holes per customer requirements Available 36 or 48 wide x 60 high x 18 deep Model Designation: SC6-W60-18 where W=width Example: SC6-3660-18 is a 36 wide x 60 high x 18 deep unit Note: CMP also manufactures a full line of Nurse Documentation Stations that offer over 150 different configurations for all of your computing and documentation needs. Custom Sizes Available Continental Metal Products Co., Inc. P.O. Box 2295, 35 Olympia Avenue, Woburn, MA 01888 Phone (781) 935-4400 FAX (781) 935-4404 www.continentalmetal.com cmpwbn@gis.net
Stainless Steel Storage Cabinets Specifications: Continental Metal Products Stainless Steel Storage Cabinets are constructed of 18 gauge, type 304 stainless steel with a No. 4 finish. All exposed welds to be done by Heliarc process and ground and polished to match No. 4 finish. Storage cabinets can be selected and arranged in many different ways to accommodate the storage and operational needs of any institution. The cabinets have a self-trimming perimeter flange that allows for an easy and clean installation into recessed openings. The cabinets are also available with finished ends and tops for freestanding installations. The cabinets can be mounted on a contractor built base or supplied with a stainless steel pedestal base. Glass doors contain ¼ thick safety plate glass. Entire front portion of door is punched and formed from one piece of 18 gauge stainless steel. Stainless steel double pan doors and sliding glass doors are also available. Doors are mounted on heavy duty chrome plated hinges and are secured closed using nylon friction roller catches. Two point knob lock doors are also available. Cabinets with shelves use pilaster strips that allow for height adjustment increments of ½. The pilaster strips are easily removed to allow for proper sterilization of the cabinet and pilaster strip. Drawers are mounted on ball bearing slides and contain pullout stop and roll-out prevention. Handles for doors and drawers are chrome plated. Cabinets are also available with doors on both sides as a pass-through feature to enable loading of cabinet from corridor side. For Warming Cabinets, the heating chamber shall be insulated with 1 ½ thick fiberglass insulation. DSC5 models contain two adjustable wire shelves and DSW2AE models contain three adjustable wire shelves. Compartment shall have an insulated double-wall door with semi-concealed pivot hinges with magnetic catch and heat resistant gasket. ¾ thick clear Thermopane glass doors are available as an option. Warming Cabinet shall be capable of heating contents within 2 to 6 hours depending on load. Chamber heating system is electric and utilizes strip heaters that are mounted on the rear wall concealed behind a removable perforated guard. When specified, door shall also be available for the other side of unit as a pass-through feature, enabling loading of the Warming Cabinet from either side of unit. The Warming Cabinet contains a microprocessor control system with a digital display. Components shall include thermostatic temperature control, lighted rocker arm power switch, 15 amp circuit breaker protection, heat indicating lamp, continuous air circulating fan, Fahrenheit/Celsius conversion button, 180 degree hi-limit cut-off thermostat for over-temperature protection with red warning lamp and audible alarm buzzer. All operating controls and indicators shall be functional and visible from the exterior of cabinet. Cabinets and Nurse Documentation Stations can be configured to the user s specific requirements. Electrical outlets and wire routing holes can be located as required. Contact CMP for more information. Service Requirements for Warming Cabinets: (One Compartment Heat) - 120V, 60HZ, 1PH, 7 Amps (Two Compartment Heat) - 120V, 60HZ, 1PH, 12.5 Amps Units are also available for 220/240V, 50/60HZ Continental Metal Products Co., Inc. P.O. Box 2295, 35 Olympia Avenue, Woburn, MA 01888 Phone (781) 935-4400 FAX (781) 935-4404 www.continentalmetal.com cmpwbn@gis.net
Stainless Steel Storage Cabinets Options: Surgical Table Accessory Cabinet (SC1 Series) Desk Cabinet (SC3 Series) Warming Cabinet (DSC5 Series) Computer Charting Workstation (SC6 Series) Media Cabinet (SC4 Series) Sliding Glass Doors General Storage Cabinet (SC2 Series) Miscellaneous Supply Cabinet (SC4 Series) Warming Cabinet (DSW2AE Series) Nurse Documentation Station (Call CMP for details) Hinged Glass Doors S/S Double Pan Doors Casters for Mobility Two Point Knob Locks Recessed Installation Left or Right Side Door Hinging Free Standing Installation Locking Doors Pass-Through Feature Locking Drawers Gaskets for Pass-Through Cabinet Thermopane Glass Doors for Warming Cabinets Stainless Steel Slope Top S/S Finished End Panels Electronic Interlock System for Pass-Through Cabinet Seismic Anchoring S/S Pedestal Base Stainless Steel Trim Strips Storage Baskets Catheter Slides 220/240V, 50/60HZ Custom Sizes Available Stainless Steel Pegboard Lead Lined Unit for X-Ray Protection Continental Metal Products Co., Inc. P.O. Box 2295, 35 Olympia Avenue, Woburn, MA 01888 Phone (781) 935-4400 FAX (781) 935-4404 www.continentalmetal.com cmpwbn@gis.net