Split System Cooling Product Data XL20i 4TTZ0024, 036, 048 & 060 with ComfortLink II and Charge Assist 2, 3, 4 & 5 Tons PUB. NO. 22-1825-08
Features and Benefits Two CLIMATUFF compressors deliver 50% and 100% capacity modulation Efficiency up to 20 SEER All aluminum SPINE FIN coil WEATHERGUARD II top shields unit WEATHERGUARD fasteners QUICK-SESS cabinet, service access and refrigerant connections with full coil protection DURATUFF base, fast complete drain, weather proof COMFORT-R mode approved COMFORTLINK II system, only two wire control connection CHARGE ASSIST fast/accurate charging every time Glossy corrosion resistant finish Internal compressor high/low pressure & temperature protection Start kit standard 50% or 100% capacity modulation Compressor sump heat Electronic compressor control Liquid line filter/drier Tarpaulin gray cabinet with anthracite gray top Low sound with advanced fan system and compressor sound insulator Variable speed fan motor XL Seacoast shield Service valve cover R-410A refrigerant S.E.E.T. design testing 100% line run test Low ambient cooling to 55 F as shipped Extended warranties available 2011 Trane 2 22-1825-08
Contents Features and Benefits 2 General Data 4 Product Specifications 4 A-weighted Sound Power Level [db(a)] 4 Accessory Description and Usage 5 ARI Standard Capacity Rating Conditions 5 Model Nomenclature 6 Electrical Data 7 Dimensions 10 Mechanical Specification Options 11 22-1825-08 3
General Data Product Specifications Model No. 1 4TTZ0024A1 4TTZ0036B1 4TTZ0048A1 4TTZ0060A1 Electrical Data V/Ph/Hz 2 200/230/1/60 208/230/1/60 200/230/1/60 200/230/1/60 Min Cir Ampacity 14 19 26 31 Max Fuse Size (Amps) 20 30 40 50 Compressors 2 - CLIMATUFF 2 - CLIMATUFF 2 - CLIMATUFF 2 - CLIMATUFF RL AMPS - LR AMPS 8.7-58 13.2-60.0 18.6-93.4 22.8-128.7 Outdoor Fan FL Amps 2.80 2.80 2.80 2.80 Fan HP 1/3 1/3 1/3 1/3 Fan Dia (inches) 27.5 27.6 27.6 27.6 Coil Spine Fin Spine Fin Spine Fin Spine Fin Refrigerant R-410A 10/10-LB/OZ 10/8-LB/OZ 15/7-LB/OZ 13/15-LB/OZ Line Size - (in.) O.D. Gas 3 3/4 3/4 7/8 7/8 Line Size - (in.) O.D. Liquid 3 3/8 3/8 3/8 3/8 Dimensions H x W x D (Crated) 57.4 x 35.1 x 38.7 57.4 x 35.1 x 38.7 57.4 x 35.1 x 38.7 57.4 x 35.1 x 38.7 Weight - Shipping 385 385 470 470 Weight - Net 335 335 420 420 Start Components YES YES YES YES Sound Enclosure YES YES YES YES Compressor Sump Heat YES YES YES YES Optional Accessories: 4 Rubber Isolator Kit BAYISLT101 BAYISLT101 BAYISLT101 BAYISLT101 Snow Leg - Base & Cap 4" High BAYLEGS002 BAYLEGS002 BAYLEGS002 BAYLEGS002 Snow Leg - 4" Extension BAYLEGS003 BAYLEGS003 BAYLEGS003 BAYLEGS003 Extreme Condition Mounting Kit BAYECMT023 BAYECMT004 BAYECMT004 BAYECMT004 Vertical Discharge Air Kit Base 4 BAYVDTA003 BAYVDTA004 BAYVDTA004 BAYVDTA004 Auto Charge Solenoid Kit BAYCAKT001 BAYCAKT001 BAYCAKT001 BAYCAKT001 24 Volt Wiring Harness BAYACHP024A BAYACHP024A BAYACHP024A BAYACHP024A Refrigerant Lineset 5 TAYREFLN7* TAYREFLN7* TAYREFLN3* TAYREFLN3* 1 Certified in accordance with the Air-Source Unitary Heat Pump Equipment certification program which is based on AHRI Standard 210/240. 2 Calculated in accordance with N.E.C. Only use HACR circuit breakers or fuses. 3 Standard line lengths - 80'. Standard lift - 25' Suction and Liquid line. For Greater lengths and lifts refer to refrigerant piping software Pub# 32-3312-0. ( denotes latest revision) 4 For accessory description and usage, see page 5. 5 * = 15, 20, 25, 30, 40 and 50 foot lineset available. MODEL SOUND POWER LEVEL [db(a)] Low Stage Overall High Stage Overall A-weighted Sound Power Level [db(a)] A-WEIGHTED FULL OCTAVE SOUND POWER LEVEL db - [db(a)] High Stage 63 125 250 500 1000 2000 4000 8000 4TTZ0024A1 59 68 44.8 54.4 60.5 57.7 61.4 61.9 55 49.1 4TTZ0036B1 67 72 50.8 55.3 64.6 67.8 64.3 63.2 57.6 51.5 4TTZ0048A1 68 76 51.3 56 68.3 71.3 65.6 69 58.9 49.6 4TTZ0060A1 70 76 51.4 59.8 67.3 68 69.6 70.1 61 51.5 Note: Rated in accordance with AHRI Standard 270-2008 4 22-1825-08
General Data Accessory Description and Usage 24 Volt Wiring Harness Used to wire a communicating outdoor unit to an existing 24 Volt indoor section. Charge Assist Solenoid Kit fast/accurate charging every time. Rubber Isolators 5 large rubber donuts to isolate condensing unit from transmitting energy into mounting frame or pad. Use on any application where sound transmission needs to be minimized. Extreme Condition Mount Kit Bracket kits to securely mount condensing unit to a frame or pad without removing any panels. Use in areas with high winds, or on commercial roof tops, etc. Low Ambient Cooling For low ambient cooling below 55 see Application Guide SSC-APG005-EN. AHRI Standard Capacity Rating Conditions AHRI STANDARD 210/240 RATING CONDITIONS (A) Cooling 80 F DB, 67 F WB air entering indoor coil, 95 F DB air entering outdoor coil. (B) High Temperature Heating 47 F DB, 43 F WB air entering outdoor coil, 70 F DB air entering indoor coil. (C) Low Temperature Heating 17 F DB, 15 F WB air entering outdoor coil, 70 F DB air entering indoor coil. (D) Rated indoor airflow for heating is the same as for cooling. AHRI STANDARD 270 RATING CONDITIONS (Noise rating numbers are determined with the unit in cooling operation.) Standard Noise Rating number is at 95 F outdoor air. 22-1825-08 5
Model Nomenclature Outdoor Units 4 T T Z 0 0 3 6 A 1 0 0 0 A A Gas Furnaces T U D 2 B 0 8 0 A C V 3 2 A A Refrigerant Type 2 = R-22 4 = R-410A TRANE Product Type W = Split Heat Pump T = Split Cooling Product Family Z = Leadership Two Stage X = Leadership R = Replacement/Retail B = Basic A = Light Commercial Family SEER 0 = 10 3 = 13 6 = 16 1 = 11 4 = 14 8 = 18 2 = 12 5 = 15 9 = 19 Split System Connections 1-6 Tons 0 = Brazed Nominal Capacity in 000s of BTUs Major Design Modifications Power Supply 1 = 200-230/1/60 or 208-230/1/60 3 = 200-230/3/60 4 = 460/3/60 Secondary Function Minor Design Modifications Unit Parts Identifier Air Handlers- Residential Refrigerant Type 4 = R-410A 4 T E E 3 C 0 1 A 1 0 0 0 A A Application TE = Fully Convertible TG = Semi Convertible TF = Front Return Product Family E = Leadership - Variable Speed H = High Efficiency C = Replacement/Retail B = Basic Flow Control 3 = TXV Non-bleed Feature Indentifier 0 = Standard Unit F = Air-Tite C = Communicating Air Handler D = Communicating with Intergated Whole Home Air Cleaner Model Number Capacity Distinguisher Major Design Change Power Supply 1 = Single Phase Electrical Connection 0 = Pig Tails B = Circuit Breaker D = Pull Disconnect Future Option - Factory Installed Heater Nominal KW Value Minor Design Change Service Digit - Not Orderable Coils Residential Refrigerant Type 4 - R410A Product Family T-Premium (Heat Pump or Convertible Coil) Coil Design X - Direct Expansion Evaporator Coil Product Family C - Cased A Coil A - Uncased A Coil F - Cased Horizontal Flat Coil Coil Width (Cased/Uncased) A - 14.5" / 13.3" B - 17.5" / 16.3" C - 21.0" / 19.8" D - 24.5" / 23.3" H - 10.5" Refrigerant Line Coupling 0 - Brazed Model Number Distinguisher Major Design Change 4 T X C B 0 0 1 C C 3 H C A A Efficiency C - Standard S - Hi Efficiency (Derived from 10 SEER products) Refrigerant Control 3 - TXV - Non-Bleed Coil Circuitry H - Heat Pump Airflow Configuration A - Upflow Only U - Upflow / Downflow H - Horizontal Only C - Convertible - Upflow, Downflow, Left or Right Airflow Minor Design Change Unit Parts Identifier 6 22-1825-08
Electrical Data Schematic Diagrams (SEE LEGEND) 4TTZ0024, 4TTZ0036, 4TTZ0048, 4TTZ0060 22-1825-08 7
Electrical Data Schematic Diagrams (SEE LEGEND) 4TTZ0024, 4TTZ0036, 4TTZ0048, 4TTZ0060 Printed from D155834P01 Rev 00 8 22-1825-08
Electrical Data Schematic Diagrams LEGEND SYMBOLS 22-1825-08 9
Dimensions 4TTZ0 Outline Drawing Note: All dimensions are in MM (Inches). MODELS BASE A B C D E F G H J K 4TTZ0024A 4 1369 (53 7/8) 946 (37-1/4) 870 (34-1/4) 5/8 3/8 152 (6) 98 (3-7/8) 219 (8-5/8) 86 (3-3/8) 1035 (40 3/4) 4TTZ0036B 4TTZ0048A 4TTZ0060A 4 1369 (53 7/8) 946 (37-1/4) 870 (34-1/4) 3/4 3/8 152 (6) 98 (3-7/8) 219 (8-5/8) 86 (3-3/8) 1035 (40 3/4) From Dwg. D152635 Rev. 15 10 22-1825-08
Mechanical Specification Options General The 4TTZ0 is fully charged from the factory for matched indoor section and up to 15 feet of piping. This unit is designed to operate at outdoor ambient temperatures as high as 115 F. Cooling capacities are matched with a wide selection of air handlers and furnace coils that are A.R.I. certified. The unit shall be certified to UL 1995. Exterior is designed for outdoor application. ComfortLink II This outdoor unit contains the ComfortLink II digital communication with 2 wire connection to outdoor and Plug-n-Play set up. Charge Assist The Charge Assist indicates system Charge Status. Casing Unit casing is constructed of heavy gauge, G60 galvanized steel and painted with a weather-resistant powder paint on all louvers, panels, prepaint on all other panels. Corrosion and weatherproof CMBP-G30 DuraTuff base. Refrigerant Controls Refrigeration system controls include condenser fan, compressor contactor and high and low pressure switches. High and low pressure controls are inherent to the compressor. A factory installed liquid line drier is standard. Compressor Two Climatuff compressors deliver 50% or 100% capacity modulation and feature internal over temperature and pressure protection and total dipped hermetic motor. Other features include: roto lock suction and discharge refrigerant connections, centrifugal oil pump and low vibration and noise. Condenser Coil The outdoor coil provides low airflow resistance and efficient heat transfer. The coil is protected on all four sides by louvered. Low Ambient Cooling As manufactured, this unit has a cooling capability to 55 F. For low ambient cooling below 55 see Application Guide SSC-APG005-EN. Comfort Control ComfortLInk II Control with Plug-n- Play set up and 3 wire connection. 22-1825-08 11
Trane www.trane.com Trane has a policy of continuous product and product data improvement and it reserves the right to change design and specifications without notice. 09/11