Proudly Designed and Manufactured in New Zealand By Arrowhead Alarm Products Ltd
ARMED = Indicates the System is Armed in Away Mode. STAY = Indicates the System is Armed in Stay Mode. BYPASS = When Flashing, a Zone has been Manually Bypassed. TROUBLE = When Flashing there is a current System Activation, requiring Resetting. TROUBLE = On Steady the Activation has been Reset, but a Fault still remains. Please see the Memory Display page for Current System Fault codes. READY = When Green, all Zones are Sealed and the System is ready to be Armed. ARMED STAY BYPASS TROUBLE READY Multi Function/Temperature Display Memory/Event indicator Zone Activity indicators Area Activation indicators = ARM will put the system into Away/Normal Armed State. = STAY will put the system into Home/Stay Armed State. = BYPASS followed by a zone number (i.e. 01, 12 ect.) then enter will disable that zone. = CONTROL is an extra function button, that can be used to control outputs. = PANIC will put the system into an immediate alarm activating the sirens. = MEMORY allows you to view current and past events, see page 4 for more info. = PROGRAM is used to get into client and installer modes, to change programming. then = Will turn ON and OFF Chime Mode (see page 8 for more details) Page 2/8
Local Edit Mode gives you the ability to adjust some individual keypad functionality. Including:12/24 hour time, Temperature display, KP Tamper, KP software version, KP Address, Calibrate Temperature, Backlight Brightness, Display Contrast and Beeper Tone. To Enter Local Edit Mode, press then then The display will then read To Exit Local Edit Mode, press then Once in Local Edit Mode use the programming addresses below to make changes if required. P= E = To Increase press To Decrease press P 900 E 1 ON = 12-hour clock, 1 OFF = 24-hour clock 2 ON = Clock and Temperature displayed alternatively, 2 OFF = Clock Only 3 ON = Display Temperature when ENTER button is pressed, 3 OFF = Feature disabled 4 ON = Enable Keypad Tamper (Not available on this Keypad) 5 ON = All Lights will turn off after 90seconds of inactivity. 6 ON = LCD Display turns off when in sleep mode. 7 ON = Backlights will not turn on when zones are triggered. 7 OFF = Will turn on for 5sec P 901 E Keypad Software Version, the KP current software version will be displayed. P 902 E Keypad Address (1-8) keypads on the same system must each have a different address P 903 E Calibrate Temperature Sensor, the current temperature will be displayed. (Warning don t adjust this location unless you have a calibrated temperature source available ) P 904 E Backlight Brightness, display will read to adjust press or P 905 E LCD Contrast, display will read to adjust press or P 906 E Buzzer Tone, display will read to adjust press or P 907 E Battery Voltage, < 2.8V High < 2.6V Mid > 2.4V Low > P 908 E Frequency & Site code, this will match the TRX Transceivers dipswitch chart. P 909 E Adjust RF Output Power, the RF output can be adjusted from 0dB(max Power) to 15dB (min Power) by using the & buttons. P 911 E Pairing KP to Transceiver, this will start the Keypad looking for a TRX Transceiver. The TRX Transceiver will also have to be in search mode by pressing the red button P 920 E Default all Keypad Local Edit Programming Options will be returned to factory default. Note, after adjusting any programming options, must be pressed to save changes. *You can not access Local Edit Mode if the system is Armed or Stay Armed Page 3/8
Pressing the Memory button once will bring up any Current System Faults/Alarms On Steady = Current Event (use Current Event Code table) ON STEADY Current Event Code Continuing to press the Memory button will cycle through the Past Events from newest to oldest A Zone light may appear, indicating what Zone the Memory Event relates to. Flashing = Past Event (use Past Event Code table) A letter indicates what Area the Memory Event relates to. A FLASHING Past Event Code when event occured DAY MONT YEAR next memory event action by* SLOT NO. TIME exit out of memory mode *=not availabe for all events = No Current System Faults = Mains fail (AC Power Fail) = Battery Low (BATTery Low) = Dialler Kiss-Off Failure (Call Failure) = Keypad Missing (KeyPad Sabotage Alarm) = Line Fail (Telephone LINE Fault) = 12V fuse or Output Failure (OutPut or FuSe Failure) = Pendant Battery Low (Pendant BATtery Low) = RF battery Low (Radio Zone BATtery Low) = Delinquency Alarm (Area DELinQuency Alarm) = Supervised Detector Failure (Radio Zone SUPervise Signal Failure) = SensorWatch Alarm (Zone SensorWatch Alarm) = OUTPUTX4 FaiL, unit has not acknowledged a keypad bus message = KeyPad Battery Low, the wireless keypad internal batteries are low. = NO RF LinK, the wireless keypad is not communicating with the TRX Page 4/8
= 12V Fuse Failure Alarm (12V Fuse Failure Alarm) = 12V Fuse Failure Restore (12V Fuse Failure Restore) = 24 Hour Zone Bypass Reinstated (24 Hour Zone Bypass Re-Instated) = 24 Hour Zone Bypass (24 Hour Zone BYpass) = 24Hour Zone Alarm (24 Hour Zone Alarm) = 24 Hour Zone Alarm Restore (24 Hour Zone Alarm Restore) = AC Power Fail Alarm (AC Power Fail Alarm) = AC Power Fail Restore (AC Power Fail Restore) = AC Fail Reported via Dialler (AC Fail Reported Alarm) = AC Fail Restore Reported via Dialler (AC Fail Restore Reported) = Automatic Test Message sent (Automatic TeST Message sent) = Auto Arm Fail (Away AUto-Arm Fail) = Auto Arm Fail Restore (Away AUto-Arm Fail Restore = Area Armed by ARM button (AWay by ARM Button) = Area Armed by Keyswitch (AWay by KeySwitch) = Area Armed by Upload/Download (AWay By PHone) = Area Armed by DTMF (AWay Armed by PHone) = Area Armed by Pendant (AWay by Pendant-TX) = Area Armed by Time Zone (AWay by Time Zone) = Area Armed by User (AWay by User) = Panel Low Battery (Panel Low BATtery Alarm) = Panel Low Battery Restore (Panel Low BATtery Restore) = Clock Changed by PC (Clock Changed by PC) = Clock Changed at panel (Clock Changed at PaNel) = Callback Initiated (CalLBacK Initiated) = CRC Error (CRC Error) = Panel Defaulted (Panel DEFauLted) = Area Delinquency Alarm (Area DELinquency Alarm) = Area Delinquency Alarm Restore (Area DELinquency Alarm Restore) = DTU Data sent to Panel (DTU to Panel Transfer) = Excessive Code Attempts Alarm (Excessive CoDe Attempts Alarm) Page 5/8
= Excessive Code Attempts Restore (Excessive CoDe Attempts Restore) = Event Buffer Cleared at Keypad (EVent Buffer Cleared at KeyPad) = Event Buffer Cleared from PC (EVent Buffer Cleared from PC) = Duress Alarm at Keypad (KeyPad Duress Alarm) = Duress Alarm at Keypad Restore (KeyPad Duress Alarm Restore) = Fire Alarm at Keypad (KeyPad Fire Alarm) = Fire Alarm at Keypad Restore (KeyPad Fire Alarm Restore) = Medical Alarm at Keypad (KeyPad Medical Alarm) = Medical Alarm at Keypad Restore (KeyPad Medical Alarm Restore) = Panic Alarm at Keypad (KeyPad Panic Alarm) = Panic Alarm at Keypad Restore (KeyPad Panic Alarm Restore) = Keypad Missing (KeyPad Sabotage Alarm) = Keypad Re-Instated (KeyPad Sabotage Restore) = Keypad Tamper Alarm (KeyPad Tamper Alarm) = Keypad Tamper Alarm Restore (KeyPad Tamper Alarm Restore) = Manual Test Message sent (Manual TeST Message sent) = Area Open by ARM Button (OPen by ARM Button) = Area Open Normal or Stay by Keyswitch (OPen by KeySwitch) = Output Turned Off by KP/Control/PC or DTMF (OutPut Turned OFF) = Output Turned On by KP/Control/PC or DTMF (OutPut Turned ON) = Area Open Normal or Stay by PC or DTMF (OPen by PHone) = Area Open Stay by STAY Button (OPen Stay by STAY Button) = Output Tamper Alarm (OutPut Tamper Alarm) = Output Tamper Alarm Restore (OutPut Tamper Alarm Restore) = Area Open Normal or Stay by Pendant (OPen by Pendant-TX) = Area Open by Time Zone (OPen by Time Zone) = Area Open Normal or Stay by User (OPen by User) = PC to Panel Comms Ended (PC to Panel Comms OFf) = PC to Panel Comms Started (PC to Panel Comms ON) = Panel Data sent to DTU (Panel to DTU Transfer) = Telephone Line Failure (TelePHone Line failure Alarm) Page 6/8
= Telephone Line Failure Restore (TelePHone Line Failure Restore) = Dialler Call Un-answered (PHone Call Not Answered) = No Kiss-Off to Dialler Event (PHone Call Not Kissed-Off ) = Exit Program Mode (PRoGram Mode Exit) = Enter Program Mode ( PRoGram Mode Entry) = Receiver Fail (ReCeiVer Fail) = Receiver Fail Restore (ReCeiVer Fail Restore) = RF Zone Battery Low (RF Zone Battery Low Alarm) = RF Zone Battery Restore (RF Zone Battery Restore) = RF Interference Alarm (RF Interference Alarm) = RF Interference Alarm Restore (RF Interference Alarm Restore) = RF Zone Supervise Fail Alarm (RF Zone Supervise Fail Alarm) = RF Zone Supervise Fail Restore (RF Zone Supervise Fail Restore) = RF Zone Tamper Alarm (RF Zone Tamper Alarm) = RF Zone Tamper Restore (RF Zone Tamper Restore) = Radio Zone Deleted (Radio-RF Zone Deleted) = Learning Radio Zone (Radio-RF Zone Learning) = Spare Off 2 = Area Armed Spare 1 = Area Armed Spare 2 = Area Open Spare 2 = Area Stay Armed by Keyswitch (STay by KeySwitch) = Soak Test Off (Soak Test OFf) = Soak Test On (Soak Test ON) = Area Stay Armed by Upload/Download (STay Armed by PC) = Area Stay Armed by STAY button (STay Armed by STAY Button) = Area Stay Armed by Pendant (STay by Pendant-TX) = Area Stay Armed by User (STay by User) = System Tamper Alarm (System TaMPer Alarm) = System Tamper Alarm Restore (System TaMPer Alarm Restore) = Pendant-TX Battery Low (Pendant-TX Battery Low Alarm) Page 7/8
= Pendant-TX Battery Low Restore (Pendant-TX Battery Low Restore) = Pendant-TX Panic Alarm (Pendant-TX Panic Alarm) = Pendant Deleted (TX-Pendant Deleted) = Learning Pendant (TX-Pendant Learning) = Pendant-TX Panic Alarm Restore (Pendant-TX Panic Alarm Restore) = User has Change Their Code (User Code CHange) = Walk Test Off (Walk Test OFf) = Walk Test On (Walk Test ON) = Zone Arm Alarm (Zone Arm Alarm) = Zone Arm Alarm Restore (ZoNe Arm Alarm Restore) = Zone Bypass Re-Instated (ZoNe Bypass Re-Instated) = Zone Bypass (ZoNe BYpass) = Zone Near Alarm (ZoNe Near Alarm) = Zone Near Alarm Restore (ZoNe Near Alarm Restore) = Zone Stay Alarm (ZoNe Stay Alarm) = Zone Stay Alarm Restore (ZoNe Stay Alarm Restore) = Zone Tamper Alarm (ZoNe Tamper Alarm) = Zone Tamper Alarm Restore (ZoNe Tamper Alarm Restore) = Zone Verified Alarm (ZoNe Verified Alarm) = Zone Verified Alarm Restore (ZoNe Verified Alarm Restore) = Zone Sensorwatch Alarm (Zone SensorWatch Alarm) = Zone Sensorwatch Alarm Restore (Zone SensorWatch Alarm Restore) To Disable Chime press then = The display will then read To Enable Chime press then = The display will then read ARROWHEAD ALARM PRODUCTS ltd. 344B ROSEDALE Rd ALBANY AUCKLAND Phone: 09 414 0085 Fax: 09 414 0088 www.aap.co.nz V1.0 Page 8/8