080530_DSsensors_EN Accessories, interfaces, sensors and complete solutions. Overview Boomerang is much more than just another temperature log system. Boomerang is a versatile and flexible monitoring and log system, capable of doing data acquisition in many areas and from many types of sensors, probes, instruments and other industrial/medical equipment. Anywhere there are needs for continuous monitoring and quality assurance, Boomerang is the natural choice. Boomerang can provide a complete solution, featuring history records for traceability and reports, process and routines overview and alarms on deviations. This datasheet shows some of our most common sensors, accessories and other solutions for environmental monitoring. If your application have needs for other sensors or interfaces, please do not hesitate to contact us, we can most likely help you with all monitoring tasks. Digital Temperature Sensor FT003/XX The digital temperature sensor is our standard version. It is designed for through-hole assembly into the equipment where you want to monitor the temperature. The sensor has a rugged design and the metal casing is acid-proof. No interface is needed the sensor is connected directly to the measurement nodes. Refrigerators/Freezers Cold-storage room Outdoor temperature Indoor temperature Incubators Heating cabinets Temperature range: -10 C - +85 C, ± 0,5 C (or -20 C - +125 C, ± 2 C) 6x70 mm 3,0 m (FT003/30 ) Combined Humidity and Temperature Sensor Probe FH002/15 This humidity and temperature sensor have a ruggedized design against rough environments, in a stainless steel housing. No interface is needed the sensor is connected directly to the measurement nodes. Storage rooms Warehouses Clean rooms Climate chambers Measure range, accuracy, Humidity: 0-100% 20-80%, ±1.8% Measure range accuracy, Temperature: -40 C - +120 C 0-40 C, ±0.5 C 14 180 mm 1,5 m
Combined Humidity and Temperature sensor Wall mounted FH003 /15 This humidity and temperature sensor is designed to be mounted on a wall. It offers excellent air throughput. No interface is needed the sensor is connected directly to the measurement nodes. Storage rooms Warehouses Clean rooms Climate chambers Measure range, accuracy, Humidity: 0-100% 20-80%, ±1.8% Measure range accuracy, Temperature: -40 C - +120 C 0-40 C, ±0.5 C Dimensions (H/W/D): 96x81 24 mm 1,5 m High resolution and accuracy, Temperature Solution THR001 The high accuracy solution is delivered with an indicator panel and a calibration certificate from our certified calibration partner. The sensor is a thermocouple wire with exposed measuring junction. It is excellent for temperature measurements of gas and air. It can also be used for surface temperature if attached to an object and (because of its small size) for measurements very close to an object. The exposed junction allows very fast response time. The high accuracy solution connects to the measuring node. Accuracy: ± 0,07 C within calibrated range 0,9 x 1100 mm Indicator panel: Big, bright display ensure good visibility in high and low ambient lighting. NTC interface TAT003 The NTC interface is required when connecting a NTC thermistor probe to the Boomerang system. NTC (Negative Temperature Coefficient) thermistor probes are excellent for applications where a surface, air, gas or liquid temperature sensor probe is required. The NTC interface connects to the measuring node. Dishwashers Temperatures in tanks (chemicals) Two (2) NTC sensors (of same type).
Pt100/Pt1000 interface TAT002 The Pt100/Pt1000 interface module is required when connecting pt100/1000 sensors to the Boomerang system. The interface module supports various kinds of Pt100/Pt1000 sensors (2,3 and 4 wired solutions). The TAT002 connects to the measuring node. two (2) sensor inputs for Pt100 or Pt1000 sensors Analogue Pt100 Temperature Sensor FT006/30 The analogue Pt100 sensor offers excellent accuracy over a wide temperature range. The principle of operation is to measure the resistance of a platinum element. The sensor is designed for through-hole assembly into the equipment where you want to monitor the temperature. The sensor has a rugged design and the metal casing is acid-proof. The Pt100/1000 interface is required (TAT002) to connect a Pt100 sensor to the Boomerang system Blood freezers Cold-storage rooms Freezers Ovens Low temperature/ultra low temperature freezers Temperature range: Sensor: -90 C - +200 C Class A 4 wired 4,75*80 mm 3,0 m (for other lengths please contact us) Analogue Pt100 Temperature Sensor FT008/30 The analogue Pt100 sensor offers excellent accuracy over a wide temperature range. The principle of operation is to measure the resistance of a platinum element. The sensor is designed for immersed assembly and the extra long metal casing can be curved to fit into a ultra-low temperature equipment. The sensor has a rugged design and the metal casing is acid-proof. To convert signals to Boomerang Measuring Nodes, the Pt100 interface is required (TAT002). Nitrogen freezers Cryo freezers Temperature range: Sensor: Dishwashers Temperatures in tanks -200 C - +200 C Class A 4 wired 3 1800 mm 3,0 m
4-20 ma Input interface TIO001 The 4-20 ma input interface provides an industry standard interface to a lot of different sensors and instruments. Since the interface have multiple inputs it gives a wide flexibility in many applications, eg. to monitor a larger machine or instrument. The 4-20 ma interface connects to the measuring node. Sensors (examples Temperature Particle counter Pressure Humidity Tank level ph CO 2 Vibration etc.. (for other specific requirements, please contact us) Incubators (temperature, humidity & CO 2 ) Particle counters and other instruments Analog inputs: Digital input: three (3) 4-20 ma inputs (configurable to 0-10 V, contact us)) one (1) for digital temperature sensor, FT003 Incubator Heraeus BBD6220 Solution TIH001 The TIH001 interfaces to Thermo Scientific Heraeus BBD6220 incubators. Having this solution, Boomerang can continuously monitor and log Temperature, Humidity (RH) and CO 2 level in the incubator. Directly connects to the incubator via its special cable. Freeze & chill sequence / warm keeping Mission monitoring Solution TAT004 The mission monitoring solution automatically detects and monitors a pre-set (configurable) chill sequence or sequence for warm keeping. With this solution you have the possibility to immediately get notified when a sequence does not proceed according to your pre-set curve. Afterwards you will have full traceability in your Boomerang history record. Blast chillers / freezers Warm keeping Sensors: two (2) Pt100 or Pt100 sensors - Penetration temperature probe with hand-grip - FT004 for cryogenic applications - and other Pt100 sensors
Remote logger DR001 The Remote Logger allows Boomerang to monitor data from sites outside your ordinary radio or fixed communication does not reach. Measurements are sent to Boomerang via GSM/GPRS. Input interfaces: Communication: Power: two (2) Pt100/Pt1000 four (4) analog inputs, 4-20mA four (4) digital inputs, ON/OFF (5Volt) GSM/GPRS Ethernet, wired 10/100Base-T 12-24VDC Transport logger Solution BTLS001 The Transport Logger solution enables logging during transports, temporary logging on critical locations and/or provides a flexible low cost alternative to continuous temperature monitoring. Transport logger cards are easy to attach to any shipment and logging interval as well as alarm limits are configurable. The checker enables a quick status check upon receiving a shipment and the reader allows you to store the logged data in your Boomerang system. Kit: Installation CD Five (5) Transport logger cards Transport logger reader (USB) Handheld Checker ICU Scandinavia AB Gribbylundsvägen 15 SE-187 62 Täby, Sweden Phone: +46 (0) 8 544 435 50 Fax: +46 (0) 8 756 79 34 info@icu.se www.icuscandinavia.se ICU Technology GmbH Bahnhofstrasse 2 CH-3534 Signau, Switzerland Phone: +41 (0)34 497 28 20 Fax: +41 (0)34 497 28 21 info@icu.ch www.icuscandinavia.ch ICU Polska sp. Z o.o Falista 7 81-331 Gdynia, Poland Phone: +48 58 660 22 60 Fax: +48 58 661 67 26 info@icupolska.pl www.icuscandinavia.pl ICU Scandinavia AB Rendsburggade 6 DK-9000 Aalborg, Denmark Phone: +45 70 22 84 40 Fax: +45 98 16 64 47 info@icu.se www.icuscandinavia.dk