IAS Accreditation Number Company Name Address Contact Name TL-222 of South Florida, LLC 5371 Northwest 161st Street Miami, Florida 33014 John Lewczak Director of Quality Assurance Telephone (305) 624-4800 Effective Date of Scope April 20, 2017 Accreditation Standard ISO/IEC 17025:2005 Physical ANSI/ASTM D1621 ANSI/ASTM D1622 ANSI/ASTM D2126 ANSI A14.1 ANSI/UL1093 ASTM B117 ASTM C209 ASTM C303 ASTM C794 ASTM D412 ASTM D413 Standard test method for compressive properties of rigid cellular plastics Standard test method for apparent density of rigid cellular plastics Standard test method for response of rigid cellular plastics to thermal and humid aging American national standards for ladders - wood safety requirements Halogenated agent fire extinguishers Standard practice for operating salt spray (fog) apparatus Standard test methods for cellulosic fiber insulating board Standard test method for dimensions and density of preformed block and board type thermal insulation Standard test method for adhesion-in-peel of elastomeric joint sealants Test methods for vulcanized rubber and thermoplastic rubbers and thermoplastic elastomers tension Standard test methods for rubber property adhesion to flexible substrate International Accreditation Service, Inc. 3060 Saturn Street, Suite 100, Brea, California 92821 U.S.A Telephone +1 562-364-8201 IASInfo@iasonline.org www.iasonline.org Page 1 of 6
ASTM D471 ASTM D573 ASTM D897 ASTM D903 ASTM D1598 ASTM D1653 ASTM D1654 ASTM D2240 ASTM D2370 ASTM D2523 ASTM D3359 ASTM E96 ASTM E1512 ASTM F876 ASTM G29 ASTM G85 Standard test method for rubber property effect of liquids Standard test method for rubber deterioration in an air oven Standard test method for tensile properties of adhesive bonds Standard test method for peel or stripping strength of adhesive bonds Standard test method for time-to-failure of plastic pipe under constant internal pressure Standard test methods for water vapor transmission of organic coating films Standard test method for evaluation of painted or coated specimens subjected to corrosive environments Standard test method for rubber property durometer hardness Standard test method for tensile properties of organic coatings Standard practice for testing load-strain properties of roofing membranes Standard test methods for measuring adhesion by tape test Standard test methods for water vapor transmission of materials Standard test methods for testing bond performance of bonded anchors Standard specification for crosslinked polyethylene (PEX) tubing Standard practice for determining algal resistance of plastic films Standard practice for modified salt spray (fog) testing ANSI/ASTM D256 Standard test methods for determining the Izod pendulum impact resistance of plastics ANSI/ASTM D570 ANSI/ASTM D638 Standard test method for water absorption of plastics Standard test method for tensile properties of plastics TL-222 Page 2 of 6
ANSI/ASTM D790 Standard test methods for flexural properties of unreinforced and reinforced plastics and electrical insulating materials Heating/Cooling CAN/CSA B72-M87 Fuels and appliances ANSI/AHRI Standard 210/240 Unitary air-conditioning and air-source heat pump ANSI/ASHRAE Standard 37 ANSI/UL 174 ANSI/UL 207 ANSI/UL 465 ANSI/UL 474 ANSI/UL 484 ANSI/UL 499 Methods of testing for rating electrically driven unitary air-conditioning and heat pump Standard for household electric storage tank water heaters Standard for refrigerant-containing components and accessories, nonelectrical Safety central cooling air conditioners Standard for dehumidifiers Standard for room air conditioners (excluding supplement SA - requirements for room air conditioners employing a flammable refrigerant in the refrigerating system) Standard for electric heating appliances ANSI/UL 834 Standard for heating, water supply, and power boilers - electric ANSI/UL 873 ANSI/UL 984 Standard for temperature-indicating and -regulating Hermetic refrigerant motor-compressors ANSI/UL 1995 Heating and cooling (excluding section 35 condensing and compressor units employing flammable refrigerants) ANSI/UL 1996 ANSI/UL 2021 Standard for electric duct heaters Standard for fixed and location-dedicated electric room heaters Mechanical ANSI/ASME A17.1 Safety code for elevators and escalators (section 8.33) TL-222 Page 3 of 6
ANSI/ASME A112.19.17 ANSI/UL 22 ANSI/UL 73 ANSI/UL 325 ANSI/UL710 ANSI/UL749 ANSI/UL756 UL 104 Manufactured safety vacuum release systems (SVRS) for residential and commercial swimming pool, spa, hot tub, and wading pool suction systems Standard for amusement and gaming machines Standard for motor-operated appliances Standard for door, drapery, gate, louver, and window operators and systems Standard for exhaust hoods for commercial cooking Household dishwashers Standard for coin and currency changers and actuators Standard for elevator door locking devices and contacts Electrical ANSI/ASME A17.5 ANSI/NFPA 79 ANSI/UL 50 Elevator and escalator electrical Electrical standard for industrial machinery Enclosures for electrical, non-environmental considerations ANSI/UL 50E Enclosures for electrical, environmental considerations (excluding 8.4, dust test, 8.5 external icing test, 8.7 indoor corrosion protection, 8.8 outdoor corrosion protection, 8.9 additional corrosion protection for type 3x, 3rx, 3sx, 4x and 6p, 8.10 submersion test, 8.12 oil exclusion test) ANSI/UL 65 ANSI/UL 96 ANSI/UL 197 ANSI/UL 231 ANSI/UL506 ANSI/UL507 ANSI/UL508 ANSI/UL676 ANSI/UL813 Standard for wired cabinets Standard for lightning protection components Standard for commercial electric cooking appliances Standard for power outlets Standard for specialty transformers Standard for electric fans Industrial control Standard for underwater luminaires and submersible junction boxes Standard for commercial audio TL-222 Page 4 of 6
ANSI/UL1008 ANSI/UL1029 Transfer switch Standard for high-intensity-discharge lamp ballasts ANSI/UL1081 Standard for swimming pool pumps, filters, and chlorinators ANSI/UL1238 ANSI/UL1310 ANSI/UL1598 ANSI/UL1838 ANSI/UL2108 ANSI/UL5085-1 Standard for control for use with flammable liquid dispensing devices Standard for class 2 power units Luminaires Standard for low voltage landscape lighting systems Standard for low voltage lighting systems Low voltage transformers - part 1: general requirements ANSI/UL5085-3 Low voltage transformers - part 3: class 2 and class 3 transformers UL 775 Standard for graphic arts IEC/EN/CSA/UL/ANSI/AAMI ES60601-1 Medical electrical, part 1: general requirements for safety (excluding sections 5, 6 and 7 and sub clauses 43.2 and 48) IEC/EN/CSA/UL 60950-1 Information Technology Equipment Safety Part 1 NEMA 250 Enclosures for Electrical Equipment (1000 Volts Maximum) Energy Star Program Requirements Light commercial HVAC, (light commercial HVAC, (1- and 3- phase packaged and split systems <65,000 BTU/h) and ANSI/AHRI standard 210/240 performance rating of unitary air-conditioning and air source heat pump Air source heat pump and central air conditioner and ANSI/AHRI standard 210/240 performance rating of unitary air- conditioning and air source heat pump Room air conditioners and DOE test method 10 CFR 430, subpart B, appendix F Geothermal heat pumps and ANSI/AHRI standard 870 (DGX Systems) and ISO 13256-1 (water-to-air models) and ISO 13256-2 (water-to-water models) TL-222 Page 5 of 6
Residential water heaters and DOE test method 10 CFR 430, subpart B, appendix E (electric units only) Water coolers TL-222 Page 6 of 6