WATER HEATERS, STORAGE TANKS 6 Flamco and accessories DUO WATER HEATER SUPASTOR WATER HEATER LS STORAGE TANKS 2007 edition / UK
Flamco glass lined water heaters for potable and heating installations Flamco glass lined water heaters and storage tanks are your best option for high-quality, user-friendly products. They are manufactured by experts in a modern production facility. Flamco offers a comprehensive programme of economic water heaters and storage tanks with the best in corrosionresistant finish and environmentally-friendly heat insulation. With thermometer and thermostat (optional). Duo water heater Compatible with all modern heating installations. Duo-Solar water heater Robust, user-friendly, practically maintenance-free construction. A programme of economic, highly-capable indirect water heaters (with highquality glass lining) for hot-water provision (potable water) for solarpowered installations. Adjustable foot for precise levelling (fitted standard from 800-l model). Flamco programme Water heaters/calorifiers Storage tanks (potable water installations) (potable water installations) Storage tanks (cooling and heating installations) Duo LS PS Duo-Solar LS/E SP/E U/HP ADVANTAGES FLAMCO WATER HEATERS: Officially-approved materials. Extremely high thermal output and extensive product range. Insulation compliant with the toughest environmental guidelines. Compliant with the European directives on potable water. TS Supastor Indirect Supastor Direct 6.2
water, cooling The wide range of products we offer you in this brochure has something for each site and each source of power. All types of water heaters and storage tanks are in stock at all times, which means that they can be supplied quickly, even at short notice. Rest assured that you can put your trust in Flamco heaters and tanks - for a lifetime. DUO WATER HEATER DUO SOLAR WATER HEATER Duo water heater Indirectly water heater with welded smooth-pipe heat exchangers. Side-mounted observation flange with connection for additional heat sources (electronic heaters, heat pumps etc.). Hot water High-quality enamelled coating to DIN 4753/3 standard for hygienic water provision, coupled with the highest levels of corrosion protection including Mg-anode. Circulation. The smooth enamelled surface prevents calcinations. Duo-Solar water heater Supply connection. Return connection. Cold water. Duo Solar 300 observation flange: DN 110. Duo Solar 400 500 observation flange: DN 180. QUALITY GOES BY ONE NAME: FLAMCO 6.3
The Supastor water heaters provide an energy efficient and fast method of providing hot water Supastor direct and indirect water heaters for potable water installations. All units are extremely compact and the connections are all conveniently placed in-line to make installation easier, neater and as a result, faster. The highly efficient heating coil in the indirect units are designed to heat the maximum area of water within the vessel and provide extremely quick reheat times (only 16 minutes). The direct model can be fitted with two immersion heaters which can be ordered separately. SUPASTOR Exceptional value for money combined with outstanding performance! Certification: WRC listed and approved. Suitable for both domestic dwellings and small commercial premises. The interior of the water heater is glass lined to DIN 4753/Part 3. The cylinder s exterior is prime coated and covered by a 35 mm CFC free polyurethane foam insulation with an outer white, easy to clean, 5 mm plastic jacket. The water heaters have a low tendency to calcinations due to the glass lining. Insulation made of CFC-free hard foam (with easy-clean, white outer plastic shell). Flamco experts are at your side every step of the way. 6.4
A complete programme for all your needs: Duo. For combination with all modern heating and potable water systems. Duo Solar. Water heater for solar powered installations. U/HP. Particularly suitable for heating with condensed wall hung boilers. TS. Stable, load-bearing construction to stack boilers. LS. For connection to external heat exchangers. LS/E. Made from corrosion-resistant 1.4571 stainless steel. SP/E. Double shell version, internal tank made from stainless steel. PS. Storage tank for use in cooling and heating installations. KPS. Combines heating water storage with potable water heating. ACCESSORIES FLANGE WITH ELECTRIC HEATING ELEMENT THREADED HEATING ELEMENT RIBBED HEAT-EXCHANGER TUBE Supastor Highly efficient immersion heater designed to provide extremely quick reheat times from only 16 minutes. Immersion heaters to be ordered separately. INSULATION FITTINGS THERMOMETER High-quality glass lining as specified by DIN 4753/part 3 for hygienic hot water and the best protection against corrosion in combination with Mg or impressed anode. DIP TUBE FOR TEMPERATURE SENSOR The smooth glass lined surface is almost totally resistant to calcinations. SUPPORTING WATER HEATER THERMOSTAT The direct model can be fitted with two immersion heaters. IMPRESSED ANODES REPLACEMENT MAGNESIUM ANODES Flamco large and special tanks We can also supply tanks for use in liquid-gas installations, compressed-air/vacuum technology for transport and storage of industrial gases. Also available are vehicle tanks, storage tanks for fluids and impregnated tanks. Flamco, suppliers of distinction, brings you tanks in whatever size you need! FLANGE ADAPTER 6.5
Flamco water heaters offer the best technical solutions for each situation The TS-series is designed to support your boiler and, thanks to its similar dimensions, does not spoil the visual impact in combination with your existing water heater. The TS indirect water heaters: a range of compact, unobtrusive supporting heaters, which can support a boiler, thus creating a space-saving unit. And of course we also offer a range of stainless steel water heaters. ADVANTAGES OF THE TS INDIRECT WATER HEATER: Stable supporting construction: maximum boiler weight 300 kg. Overall space saving. Adjustable foot for quick, safe set-up. TS indirect water heater Horizontal water heater giving indirect heat with welded smooth-pipe heat exchanger. Side-mounted cleaning/observation flange. Hot water. Return connection. Circulation. Supply connection. Cold water. SP/E stainless steel water heater An indirectly-heated water heater with a robust double shell. The component parts which come into contact with potable water are made from corrosion-resistant 1.4462 stainless steel. Fitted with thermometer and immersion pipe for temperature sensor. 6.6
TS INDIRECT WATER HEATER SP/E STAINLESS STEEL WATER HEATER LS STORAGE TANK LS/E STAINLESS STEEL STORAGE TANK Hot water Storage unit connection Circulation Storage unit connection Cold water LS Storage tank Suitable for all closed potable water generating installations in connection with external heat exchanger. Peak demand covered by storage volume and loading during off-peak periods coupled with particularly economical water heating. High-quality DIN 4753/3-compliant glass line coating inc. Mg anode (impressed-current anode from 1500 L throughout series). LS/E Stainless steel storage tank May be used in all closed hot-water generating installations. Made from corrosion-resistant 1.4571 stainless steel. Side-mounted DN 110 cleaning/observation flange. 6.7
Flamco is characterized by competence, quality and experience These characteristics can be found in all types of Flamco water heaters and storage tanks. This is also the case with the PS storage tank and KPS combination storage tank shown on this page. Supplied with an adjustable foot for quick, safe set-up and CFC-free heat insulation for user-friendly installation. PS STORAGE TANK KPS COMBI STORAGE TANK PS storage tank PS storage tanks may be combined with all heating installations and may also be used as cold-water heaters. On the outside, they have anti-corrosion covering; on the inside they are unfinished. Also available with flange connections. System connection / vent Temperature sensor System connection KPS combi storage tank KPS combi storage tanks are the space-saving solution for combining several heating systems, such as solid fuel, wood, oil/gas-powered boilers and solar-powered installations connected to heaters. Cold water enters the system at the lower section in a way that does not disturb the stratification in the installation. The KPS combi storage tank has an anti-corrosion covering on the outside and is fitted with an immersion pipe to regulate the temperature of the process water. KPS COMBI STORAGE TANK THE ADVANTAGES OF FLAMCO STORAGE TANKS: The and positioning of the connectors allow for combinations with all common boilers without the need for extensive fitting. Flamco storage tanks are fitted with insulation throughout the series in the standard colours of orange and white; other colours are available on request. 6.8
Flamco Duo and Duo-Solar water heaters Duo: economical, high performance glass lined indirect water heaters providing hot (potable) water for large domestic dwellings, flats with centralized services, commercial and industrial premises. Duo 800 l to 2000 l: 80 mm CFC-free, user-friendly soft-foam material (with easy-clean synthetic outer jacket). Duo, Duo-Solar maximum permitted operating pressure: heater/tubes: 10/16 bar. Duo, Duo-Solar maximum permitted operating temperature: heater/tubes: 95/110 C (368 K / 383 K). Duo, Duo-Solar up to 500 l foot adjustment optional, on Duo 800 2000 standard. Assembly friendly and largely maintenance free construction. Models and dimensions Duo 150-2000 Type Models and dimensions Duo-Solar Type Capacity in Operating factor Coil surface Dimensions in mm inc. insulation Weight litres (NL) m 2 ØD H Tip dimension in kg Capacity in Operating factor Coil surface Dimensions in mm inc. insulation Weight litres (NL) m 2 ØD H Tip dimension in kg Insulation colour Code Duo 150 150 2.1 0.6 560 1150 1200 68 white FC DUO 150 Duo 200 200 4 0.9 560 1450 1500 86 white FC DUO 200 Duo 300 300 8.1 1.4 560 1950 2000 109 white FC DUO 300 Duo 400 400 14 1.6 750 1630 1715 158 white FC DUO 400 Duo 500 500 20 2 750 1830 1895 181 white FC DUO 500 Duo 800 800 33 3.5 750 2220 2300 295 white FC DUO 800 Duo 1000 1000 48 4.5 850 2250 2360 392 white FC DUO 1000 Duo 1500 1500 80 6.4 1000 2320 2480 570 white FC DUO 1500 Duo 2000 2000 110 7.3 1100 2400 2600 666 white FC DUO 2000 * Insulation must be ordered separately and is supplied loose. Insulation colour Code Duo-Solar 300 300 2.5 / 8.1 0.8 / 1.4 560 1950 2000 123 white FC DUOSOLAR 300 Duo-Solar 400 400 3.4 / 14 1.0 / 1.6 750 1630 1715 176 white FC DUOSOLAR 400 Duo-Solar 500 500 4.3 / 20 1.0 / 2.0 750 1830 1895 199 white FC DUOSOLAR 500 * Top/bottom coil surface. ** Complete with insulation. DUO DUO-SOLAR 6.9
Flamco U/HP, TS, SP/E and Supastor water heaters U/HP: small water heaters providing the best thermal output and reducing the loss of energy to a minimum. U/HP: maximum permitted operating pressure: heater/tubes: 16 bar / 10 bar. U/HP: maximum permitted operating temperature: heater/tubes: 110 C / 95 C TS: maximum permitted operating pressure: heater/tubes: 10 bar / 10 bar. SP/E: maximum permitted operating pressure: internal (water) / external (heat) tank: 10/3 bar. SP/E: maximum permitted operating temperature: internal (water) / external (heat) tank: 95/110 C (368 K / 383 K). Supastor direct and indirect water heaters for potable water installations. Supastor direct: maximum permitted operating pressure: 10 bar. Models and dimensions U/HP and TS Type Capacity in Operating factor Coil surface Dimensions in mm inc. insulation Weight litres (NL) m 2 ØD L H B in kg Colour of insulation Code U/HP 110 basic 110 1.7 1.1 550 870 69 white 19069 U/HP 110 110 1.7 1.1 550 870 73 white 19070 U/HP 160 160 2.9 1.3 550 1120 88 white 19075 U/HP TS 150 150 2.1 0.7 970 700 640 137 white 19143 TS 200 200 4 0.9 1150 700 640 158 white 19153 U/HP 110 basic without thermometer or cleaning/observation flange. H Models and dimensions SP/E Type Capacity in Operating factor Coil surface Dimensions in mm inc. insulation Weight litres (NL) m 2 ØD L Tip dimensions in kg Colour of insulation Code SP/E 130 130 3 1.54 560 1240 1300 116 white FC SPE 130 SP/E 170 170 5.2 1.94 560 1510 1550 131 white FC SPE 170 SP/E 300 300 18 2.65 660 1570 1650 190 white FC SPE 300 SP/E 500 500 34 3.58 860 1930 1950* 270 FC SPE 500 Insulation SP/E 500 To be ordered separately, but included in the price of the water heater white 18489 * Tip dimensions excludes insulation. ØD TS H Models and dimensions SUPASTOR Type Nominal Coil ØD with Height H with Weight Code capacity/l surface m 2 insulation/mm insulation/mm in kg Indirect 120 0.5 560 940 47 FC IND 120 Indirect 150 0.6 560 1040 51 FC IND 150 Indirect 180 0.6 560 1190 55 FC IND 180 Indirect 210 0.9 560 1340 65 FC IND 210 Indirect 250 1 560 1590 71 FC IND 250 Indirect 300 1.4 560 1840 77 FC IND 300 Direct 120-560 940 38 FC D 120 Direct 150-560 1040 40 FC D 150 Direct 180-560 1190 44 FC D 180 Direct 210-560 1340 48 FC D 210 Direct 250-560 1590 54 FC D 250 Direct 300-560 1840 60 FC D 300 L SP/E B SUPASTOR 6.10
Models and dimensions LS Flamco LS and LS/E water heaters, PS storage tanks and KPS combi tanks LS/E: economical, high performance, stainless steel load storage tanks for hot and cold (potable) water storage. LS, LS/E: maximum permitted operating pressure: 10 bar. LS, LS/E and PS: maximum permitted operating temperature: 95 C (368 K). PS: mild steel buffer tanks suitable for water storage in heating and chilled water (cooling) installations. PS: maximum permitted operating pressure: 3 bar. KPS: maximum permitted operating pressure: storage tank / potable water accumulator: 3 / 10 bar. KPS: maximum permitted operating pressure: tubes: 10 bar. KPS: maximum permitted operating temperature: 95 C (368 K). Type Capacity Dimensions in mm incl. insulation Weight Code in litres Ø D H Tip dimension in kg LS 200 200 550 1130 1220 60 FCBV LS 200 LS 300 300 550 1630 1700 82 FCBV LS 300 LS 500 500 650 1640 1800 125 FCBV LS 500 LS 750 750 750 1970 2070 190 FCBV LS 750 LS 1000 1000 800 2230 2320 232 FCBV LS 1000 LS 1500 1500 1000 2320 2480 397 FCBV LS 1500 LS 2000 2000 1100 2440 2600 474 FCBV LS 2000 Models and dimensions LS/E Standard colour: white RAL 9010. Type Capacity Dimensions in mm incl. insulation Weight Code in litres ØD H Tip dimension in kg LS/E 300 300 550 1630 1700 67 FCBV LSE 300 LS/E 500 500 650 1640 1800 94 FCBV LSE 500 LS/E 750 750 750 1970 2070 116 FCBV LSE 750 LS/E 1000 1000 800 2230 2320 131 FCBV LSE 1000 LS, LS/E KPS Standard colour: white RAL 9010. Models and dimensions KPS Type Nominal capacity Tube coil Dimensions in mm Weight Code in litres Portable water surfacte in incl. insulation in litres m 2 ØD H Tip dimension in kg KPS 750/230 750 230 2.2 750 2020 2100 238 19080 KPS 1000/230 1000 230 2.7 850 2150 2250 281 19090 Standard colour: white RAL 9010. Models and dimensions PS Type Capacity in Dimensions in mm without insulation Weight Code Code litres ØD H Tip dimension in kg insulation PS PS 200 200 550 1050 1150 56 18728 FCBV PS 200 PS 500 500 650 1640 1700 83 18758 FCBV PS 500 PS 750 750 750 1970 2000 124 18788 FCBV PS 750 PS 1000 1000 800 2230 2260 182 18808 FCBV PS 1000 PS 1500 1500 1000 2320 2380 252 18818 FCBV PS 1500 PS 2000 2000 1100 2350 2400 282 18828 FCBV PS 2000 PS 6.11
WATER HEATERS, STORAGE TANKS DUO WATER HEATER CONTENTS PAGE Duo/Duo-Solar water heaters 6.2/6.3 Supastor water heaters 6.4/6.5 Accessories 6.5 TS indirect water heater, SP/E water heater, LS and LS/E storage tanks 6.6/6.7 PS storage tank and KPS combi tank 6.8 Flamco UK Limited Unit 4, St. Michael s Road Lea Green Industrial Estate St. Helens, Merseyside WA9 4WZ Tel.: +44 (0) 1744 818100 Fax: +44 (0) 1744 830400 info@flamco.co.uk www.flamco.co.uk SUPASTOR WATER HEATER Tables 6.9/6.11 LS STORAGE TANKS Copyright Flamco UK Limited. No part of this publication may be reproduced or published in any way without explicit mention of the source. The data listed are solely applicable to Flamco products. Flamco UK Limited shall accept no liability whatsoever for incorrect use, application or interpretation of the technical information. Flamco UK Limited reserves the right to make technical alterations. Flamco UK Limited conditions of sale apply. 18502381