GT CAST RON FLOOR-STANDNG FUEL OL-/GAS-FRED BOLERS GT : for hot water central heating only GT : for hot water central heating and domestic hot water production with a 16- or 5-litre calorifier under the boiler GT GT GT for heating only GT for heating and domestic hot water production The GT s are low temperature cast iron boilers, with an useful output of to 1 kw and high combustion efficiency (up to.%) with a sealed pressurised combustion chamber to be fitted with a pressure jet fuel oil- or gas burner. They are available with various control panels and are all factory fitted with domestic hot water priority (except X-Panel) and can be used to control 1-stage burners (B, D control panels), -stage burners (B) or modulating burners (DEMATC control panel + AD1 PCB): The GT s can be delivered with the choice of a high performance 16- or 5-litre DHW calorifier, fitted with a Titan Active System anode with self-adapting current for the maintenance-free protection of the tank. Oil-/Gas CE identification No: 11BR65 CONDTONS OF USE Boiler: Max. operating temperature: 1 C Max. operating pressure: bars Thermostat adjustable from to C Safety thermostat: 11 C Domestic hot water calorifier: Max. operating temperature: C Max. operating pressure: 1 bars Max. usable pressure: bars PROJECT
PRESENTATON STRONG PON The GT is a low temperature, cast iron boiler with an output of 5 to 1 kw, high combustion efficiency (up to.%), with a pressurised combustion chamber to be fitted with an oil or gas burner: - Heating body in eutectic cast iron, which is highly resistant to corrosion, for low temperature operation modulated to C. - Body design with -path flue gas evacuation providing advantageous acoustic properties, with a large combustion chamber to enable perfect adaptation to all types of burner, flue ways with fins including baffle plates for optimum heat exchange, available in separate sections for adaptation to boiler rooms with difficult access. - Burner and sweeping doors mounted on reversible hinges. - Enhanced, 1 mm thick glass wool insulation. - Available with various control panels, all of which can be used to control -stage or modulating burners: see pages 8 to 1. - The GT is equipped with a 16 or 5 litre calorifier placed under the boiler for DHW production, fitted with a Titan Active System anode with self-adapting current for the maintenance-free protection of the tank. MODELS Control panel Model in kw X B (Basic) D (DEMATC ) B (Base ) D + AD1 (DEMATC + PCB AD1) Output for controlling 1-stage burner for controlling burner in Mcal/h -stage -stage or modulating -5.-. GT X GT B GT D - - 5-6.-55. GT 5 X GT 5 B GT 5 D - - GT For heating only 6-8 55.-6. GT 6 X GT 6 B GT 6 D GT 6 B GT 6 D + AD1 GT _Q GT _Q GT For heating and DHW production by L 16 (16 l) or L 5 calorifier (5 l) placed horizontally under the boiler 8-6.-. GT X GT B GT D GT B GT D + AD1-1.-86. GT 8 X GT 8 B GT 8 D GT 8 B GT 8 D + AD1-5.-. - GT B/L 16 GT D/L 16 - - 5-6.-55. - GT 5 B/L 16 GT 5 D/L 16 - - -5.-. - GT B/L 5 GT D/L 5 - - 5-6.-55. - GT 5 B/L 5 GT 5 D/L 5 - -
TECHNCAL SPECFCATONS MAN DMENSONS (N MM AND NCHES) GT 5 B 1 165 tapped connections ø M8 on ø 15 spot welds on ø 1 56 11 1 5 51 56 555 115 1 (1) Adjustable feet from 5 to 5 mm. (1) 5 Drilling at ø 11 precut at ø 1 E A = = 16 GT_F1 Model A B Ø C E GT 15 R 1" 1/ 8 GT 5 8 8 15 R 1" 1/ 5 GT 6 5 16 18 R 1" 1/ 6 GT 181 115 18 R 1" 1/ 61 GT 8 18 18 18 R 1" 1/ 888 GT 5 B 1 15 11 165 tapped connections ø M8 on ø 15 spot welds on ø 1 A 1 1 5 51 555 = 115 = 1 (1) 5 Drilling at ø 11 precut at ø 1 E 16 5 6 6 8 86 516 GT_FA 8 6 5 () 5 8,5 (L 16) 16 (L 5) 1 (L 16) 61 6 1 (L 5) Model A B Ø C E GT /L 16, GT /L 5 15 R 1" 1/ 8 GT 5/L 16, GT 5/L 5 8 8 15 R 1" 1/ 5 Heating flow Heating return Drainage and filling hole Rp /" Flue gas nozzle Ø C DHW outlet G 1" DCW inlet G 1" DHW circulation loop return G /" (optional) Drainage and filling valve - connection for pipe int. Ø 1 mm () Adjustable feet: basic height 5 mm, adjustment range 5 to 5 mm R = Threading Rp = Tapped connection G = Cylindrical external thread (water tightness by flat gasket)
TECHNCAL SPECFCATONS BOLER SPECFCATONS 5 6 8 Model GT 5 Nominal output kw 5 6 8 1 Efficiency at % output and C average temp. - 1% at C % 1. 1.8. 1. 1.8 - % at C %.1..6.6. Water flow at t = K m /h.151.5.56.5. Standing losses at t = K W 118 1 16 181 Electrical power (without pump) with DEMATC control panel W 1 1 1 1 1 Useful output range kw -5 5-6 6-8 8- -1 Water content L 6 5 5 6 Water resistance at t = K mbar 6. 1. 1... Flue gas circuit volume L 5 68 8 111 Combustion chamber - inscribed Ø /depth mm /6 /5 / /8 /5 - volume L 51 6 6 Flue gas mass flow rate - domestic fuel oil kg/h 8 16 1 15 166 - natural gas kg/h 1 11 1 168 18 Combustion chamber pressure mbar.-.5.-.6.-.8.-.8.6-. Net weight GT kg 18 5 6 5 GT /L 16-5 kg 18-8 5-8 - - - Values at nominal output and CO = 1% with domestic fuel oil and.5% with natural gas, draught at the nozzle = mbar DOMESTC HOT WATER PRODUCTON SPECFCATONS (GT ) Model GT /L 16 /L 5 5/L 16 5/L 5 DHW calorifier capacity L 155 155 Exchanged power kw 8 6 8 6 Specific rate at t = K (compliance with EN 1-1) L/min.5.5 Flow per hour at t = 5 K L/h 6 885 6 885 Flow over 1 min at t = K L/1 min 55 85 55 85 Auxiliary electrical power in DHW mode W 8 8 8 8 DHW performances at ambient air temp. at nominal output: C, cold water temp.: 1 C, primary hot water temp.: 8 C, DHW storage temp.: 6 C X CONTROL PANEL The X-control panel which can only be fitted to GT to GT 8 boilers, for heating only, includes the control and safety devices used to operate the installation by regulating the temperature with the boiler thermostat. On/Off switch Thermometer Alarm light Safety thermostat test button Timed circuit breaker A Boiler thermostat adjustable from to C Safety thermostat 11 C with manual reset 855Q
B AND B CONTROL PANELS The B control panel, which can be fitted to all boilers in the GT range, is used to control 1-stage burners and includes the control and safety devices used to operate the installation by regulating the temperature with the boiler thermostat. t is factory fitted with domestic hot water production priority: DHW sensor delivered as standard with GT versions or delivered as an option (package AD1) for GT s connected to an independent DHW calorifier. room temperature thermostats can also be delivered as options; when the B control panel is used with room temperature thermostats, it can control direct circuits. The B control panel, which can be fitted to GT 6 to 8 boilers, operates according to the same principle as the B control panel but is adapted for use with boilers fitted with a -stage burner. A room temperature thermostat (optional) can be added to control 1 direct circuit. On/Off switch Summer/Winter switch Alarm light Safety thermostat test button Safety thermostat with manual reset 11 C Electronic domestic hot water thermostat Timed circuit breaker A for B control panel 6A for B control panel Boiler thermostat 855Q1 Light + DHW temperature display Light + boiler temperature display B AND B CONTROL PANELS OPTONS 8518Q Domestic hot water sensor (length 5 m) - Package AD1 This is used to regulate the boiler with domestic hot water temperature priority. t is fitted as standard to the GT. The connector provided is used to deactivate the Titan Active System function if a DHW calorifier with magnesium anode protection is connected. 881Q 8666Q1A 881Q Programmable wire-controlled room thermostat - Package AD1 This thermostat handles the regulation and weekly programming of heating by activating the burner and in accordance with the following modes of operation: - Automatic: according to programming ( programmes to choose from), automatically switches the installation to comfort or low mode. The comfort and low temperatures can be adjusted between 5 and C. Programmable wireless room thermostat - Package AD This radio transmission thermostat handles the regulation and weekly programming of heating by activating the burner and according to the same modes of operation as the programmable room thermostat in package AD. t is delivered with a receiver box to be affixed to the wall close to the boiler. Non-programmable room thermostat - Package AD1 This room thermostat is used to regulate the room temperature between 6 and C by activating the burner. - Permanent: maintains the desired temperature all the time (between 5 and C). - Holidays: intended for long absences, maintains the desired temperature (between 5 and C) for a predetermined duration (1 to days). The programmable thermostats AD1/AD are equipped with: a telephone remote control, a selection of the installation type (heating or air conditioning) and a selection of the adjustment mode (On/Off or proportional). 5
DEMATC CONTROL PANEL The DEMATC control panel is a very advanced control panel, which includes electronic programmable regulation to modulate the boiler temperature by activating the 1-stage burner according to the outside temperature and also to the room temperature, if a CD D. isystem or CDR D. isystem interactive remote control (optional) is connected. DEMATC control panel is capable of automatically operating a central heating installation with a direct circuit without mixing valve (which can even be configured as a swimming pool circuit). Connection of a domestic hot water sensor (delivered as standard with the GT ) enables the programming and regulation of a DHW circuit by activating a control unit on the load pump; DHW circulation loop can be handled thanks to an auxiliary contact which includes its own programming. The addition of 1 or PCB + sensor for a valve circuit options (package FM8) enables the regulation of 1 or circuits with mixing valve: a CD D. isystem, CDR D. isystem or a simplified remote control for each of these circuits can also be delivered as optional equipment. The connection of other additional circuits is also possible using DEMATC VM isystem control units. DEMATC control panel also provides antifreeze protection for the heating system water if the owner is absent (absence programmable up to 1 year in advance for a period of up to days). Moreover, in larger installations, it is possible to connect up to 1 boilers in cascade with the DEMATC control panel + AD1 PCB, each boiler can be equipped with 1 or PCB + sensors for 1 valve circuit options: to do so, simply connect them to each other using a BUS cable. Control panel Alarm light -position switch: - Auto: automatic operation - Manual: forced operation On/Off switch DEMATC control module with levels of access: flap closed or flap open Timed circuit breaker (6A) Safety thermostat with manual reset 11 C 855QA Safety thermostat test button DEMATC control module, flap closed Temperature setting keys: - comfort temperature (from 5 to C) - low temperature (from 5 to C) - DHW temperature (if a calorifier is connected) (from 1 to 8 C) 855F 6 8 1 1 1 16 18 B + or - setting keys Display Operating mode selection keys Auto: automatic operation according to the time programme on the various circuits : forced operation at comfort temperature until midnight : forced operation at low temperature until midnight : antifreeze mode for the period programmed : DHW tank load mode enabled DEMATC control module, flap open Keys for accessing settings and measurements - page scrolling - line scrolling - back to the previous line Programme keys: - input comfort period or tank load enabled Manual Summer shutdown key: heating is shut down but DHW production continues 6 8 1 1 1 16 18 B A.B.C PROGR STANDARD 855F1 Standard programme key - input low period or tank load disabled - return to graphic programme bar Selection key for programming circuit A, B, C Fitter settings access key Key for selecting the heating programme - P1, P, P or P per circuit: - programmes are preset in the factory (see standard key). - programmes - P, P, P - can be customised 6
DEMATC CONTROL PANEL + AD1 DEMATC CONTROL PANEL WTH THE ADDTON OF PACKAGE AD1: STAGE/MODULATNG/WV PCB With the addition of the stage/modulating/wv PCB package AD1 the DEMATC control panel can be adapted to GT boilers fitted with a -stage burner or a modulating burner. Apart from controlling this burner, this PCB includes as standard the control and programme for 1 circuit with mixing valve: to do so, simply connect it to an outlet sensor package AD1 (optional). n an installation with a second valve circuit, the DEMATC control panel can be further complemented with a PCB + sensor for 1 mixing valve package FM8 (optional) in addition to the AD1 PCB. n a cascade installation with up to 1 boilers, DEMATC control panels + AD1 can be used to control injection pumps and gate valves. DEMATC CONTROL PANEL OPTONS 8518Q Domestic hot water sensor (length 5 m) - Package AD1 This is used to regulate the boiler with domestic hot water temperature priority. t is fitted as standard to the GT. The connector provided is used to deactivate the Titan Active System function if a DHW calorifier with magnesium anode protection is connected. 855Q6 PCB + sensor for 1 mixing valve - Package FM8 This is used to control a mixing valve with a twodirection electrothermal or electromechanical motor. The valve circuit and its circulating pump can be programmed independently. Note: DEMATC control panels can be fitted with 1 or PCB + sensor options for 1 mixing valve. GT_Q1 stage/modulating/wv PCB - Package AD1 This PCB is used to control a GT D boiler fitted with a -stage or modulating burner. t is delivered as standard with GT D boilers + AD1. t also includes control and programming of a circuit with a -way mixing valve; the outlet sensor downstream of the valve (package AD1) must be ordered separately, however. GT_Q Outlet sensor downstream of the valve (length.5 m) - Package AD1 This sensor is required if using the stage/modulating/wayvalve PCB for controlling a circuit with mixing valve. AD8/85 AD5 CALENTA_Q5 8666Q1A CD D. isystem interactive remote control (wire) - Package AD85 CDR D. isystem interactive radio remote control (without transmitter/receiver radio) - Package AD8 Radio boiler module DEMATC isystem (transmitter/receiver) - Package AD5 These are used to override all instructions from the DEMATC control panel from the room in which they are installed. n addition, they enable the self-adaptability of the heating regime for the circuit concerned (one CD D. or CDR D. isystem per circuit). n the case of the CDR D. isystem, the data are transmitted by radio waves from the place where the CDR D. isystem is installed to the transmitter/ receiver box placed close to the boiler. AD51 AD5 855Q Radio outside temperature sensor - Package AD51 Boiler radio module (radio transmitter) - Package AD5 The radio outside temperature sensor can be delivered as optional equipment for systems in which the installation of the external wire connection sensor delivered with DEMATC control panel would be too complex. f this sensor is used : - With a wire connection remote control (AD85 or FM5), it is necessary to order the "Boiler radio module" as well - With a radio remote control (AD8) already equipped with a radio module, ordering a second "Boiler radio module" is not necessary.
DEMATC CONTROL PANELS DEMATC CONTROL PANEL OPTONS 8Q BUS connecting cable (length 1 m) - Package AD1 t is used to make the connection between boilers fitted with the DEMATC control panel in a cascade installation, or to connect a DEMATC VM isystem control unit. 851Q1 855Q Sensors for buffer tank (length x 5, m) - Package AD16 ncludes 1 DHW sensor and 1 heating sensor for managing a buffer tank with a boiler fitted with a DEMATC control panel. Simplified remote control with room sensor - Package FM5 The connection of a simplified remote control is used to override certain instructions from the DEMATC control panel from the room in which it is installed: programme override (permanent comfort or low) and set room temperature override (±.5 C). t is also used to enable the self-adaptability of the heating curve for the circuit concerned (1 remote control per circuit). 8
BOLER OPTONS 881Q18 Dip sensor with tube - Package AD18 This dip sensor (NTC 1) is delivered with an P 5 junction box and a 1/ sensor tube, length under head 1 mm. t is used instead of the attachable sensors provided with the PCB and valve options. t can also be used on the header pipe when connecting boilers in cascade. DTG1_Q Protective magnesium anode - Package EA1 For DHW calorifiers on GT /L models if the Titan Active System self-adapting current anode fitted as standard is not permanently activated (in secondary homes, for example). DTG1_Q1 855Q8 DTG1_F5 G and R connector kit (1 and / ) - Package BH8 This kit includes x G 1"-R 1" connections and 1 x G /"-R /" connection with seals and enables the passage of flat seal connections into W electrical resistance kit - Package BH6 The GT L 16 or L 5 DHW calorifier can be fitted with an optional electrical resistance. This resistance is composed of an ncoloy heating element and is fitted with a regulating thermostat and a safety thermostat. t is affixed to a flange fitted instead of the existing flange. BPB/BLC DHW calorifier/boiler connection kit: - Package EA11: for GT, GT 5 - Package EA118: for GT 6 to 8 As a general rule, the DHW calorifier can be placed to the right or left of the boiler according to the details given in the technical instructions for the boiler. The connection kits include an air vent, a non-return valve, a load pump and all the pipes required to make the connection. conical connections on GT 16- and 5-litre DHW calorifiers. Note: in this case, the tank is protected by the magnesium anode fitted to the flange which includes the resistance. Note: The hydraulic specifications of the load pumps provided with these connection kits make it possible to reach primary flow values of between and m /h depending on the pressure drop in the boiler connected to the DHW calorifier. M 1/ S M X G N 88Q8A OEX_Q1 88Q6 Fuel oil or gas burner De Dietrich new generation fuel oil or gas burners are compact, silent, especially designed to obtain optimum performance in combination with each * Min. 1 stage output (1) GT 6,, 8 fitted with B and DEMATC control panels + AD1 only De Dietrich boiler in the GT range to which they are fitted: high efficiency and combustion quality. Fuel oil burner type M 1/ S M 1- X Low NOx burner (NOx < 1 mg/kwh) M 1- X M 1/ S M 1-11 X M / S 1 stage 1 stage 1 stage stages 1 stage stages Output range kw -65 1-5 -8 6-1 -16 55*/8/15 For boilers GT / GT 6 GT / GT 6, GT, GT 8 GT GT 5/5 GT 5/5 GT 8 (1) Gas burner type Low NOx burner (NOx < 8 mg/kwh) Eco NOx burner (NOx < mg/kwh) 1 stage G /1 S 1 stage G 1/ N modulating G / N Output range kw 8-6-1 5-1 For boilers GT /, GT 5/5 GT 6, GT, GT 8 GT 6, GT, GT 8 (1)
NFORMATON REQURED FOR NSTALLATON NSTALLATON N BOLER ROOMS The figures shown in red are the minimum recommended dimensions (in metres) to guarantee easy access around the boiler. GT GT 1115 15 1m 1m L 1m,5m,5m 5 GT_F8 1 (16L) 1 (5L) 1m,5m,5m 6 GT_F GT 5 6 8 L (mm) 8 5 181 18 VENTLATON OF THE BOLER ROOM This must comply with the prevailing national regulations. The location of air inlets in relation to the high ventilation openings must ensure that air is renewed in the entire volume of the boiler room. n order to avoid damage to boilers, it is necessary to prevent the contamination of combustion air by chloride and/or fluoride compounds, which are particularly corrosive. These compounds are present, for example, in aerosol spray cans, paints, solvents, cleaning products, washing powders/liquids, detergents, glues, snow clearing salts, etc. t is therefore necessary: - To avoid sucking in air discharged from premises using such products: hairdressers, dry cleaners, industrial premises (solvents), premises containing refrigeration systems (risk of leaking refrigeration fluid), etc. - To avoid the storage of such products close to boilers. Please note that, if the boiler and/or its peripherals become corroded by chloride and/or fluoride compounds, our contractual warranty cannot be invoked. CONNECTON TO A CHMNEY The high performances of modern boilers and their use under specific conditions related to changes to burner technologies (for example, operation at modulated low temperature) result in very low flue gas temperatures. This requires: 1- The use of chimney flues designed to enable the flow of condensates, which may result from such operating modes, in order to prevent the risk of damage to the chimney. - The installation of a bleeding T at the foot of the chimney. The use of a draught moderator is also recommended. The table below contains the minimum dimensions of the flue required for each model of boiler to ensure sufficient draught at the nozzle. However, care must be taken to comply with any applicable national or local regulations. Connection to the chimney: The cross section of the pipe used to connect the boiler nozzle to the flue must be at least equal to that of the nozzle and the conduit must be as direct and as short as possible. Boiler GT 5 6 8 Combustion mbar.-.5.-.6.-..-.8.6-. chamber pressure* Ø (mm) 15 15 18 18 18 Chimney min. height (m) 5 5 5 5 5 * for a draught at the nozzle = mbar 1
6 8 1 1 1 16 18 MERCRED 15h8 6 8 1 1 1 16 18 MERCRED 15h8 A A 5 6 1 8 5 6 1 8 6 8 1 1 1 16 18 MERCRED 15h8 6 8 1 1 1 16 18 MERCRED 15h8 N 5 5 6 8 6 8 A A A A C C C PROG A 1 5 6 6 8 1 1 1 16 18 MODE PROG STANDARD + - N C C N C C Dietrisol B < > SET EXAMPLES OF NSTALLATONS The examples presented below cannot cover the full range of installation scenarios. Their purpose is to draw the attention to the basic rules to be followed. A certain number of control and safety devices are represented but, in the last resort, it is up to the experts, consultant engineers and design departments to make the final decision on the control and safety devices to be used in the boiler room. n all events, it is necessary to abide by the codes of practice and the local and national regulations in force. Attention: For the connection of domestic hot water, a sleeve made of steel, cast iron or any other insulating material must be interposed between the hot water outlet and this pipework to prevent any corrosion to the spot welds, if the distribution pipework is made of copper. nstallation of GT with 1 direct circuit 1-stage burner B E* D Basic Easymatic as standard DEMATC -stage / modulating burner B Basic as standard D DEMATC AD 1 (1) as standard 1 51 V 5Hz 5 11 1 16 6 1 5 18 8 GT_F1 nstallation of GT with 1 direct circuit + 1 circuit with mixing valve; domestic hot water production using the DETRSOL solar system 1-stage burner DEMATC as standard FM 8 AD 1 -stage / modulating burner DEMATC as standard AD 1 (1) AD 1 AD 1 11a 51 1 65 11 V 5Hz 1 1 5 11 5 11 1 6 5 56 81 1 8 8 61 85 6 Key: see page 1 1 16 5 18 11b 88 11 TRO DT... 16 V 5Hz 8 GT_F11A 11
6 8 1 1 1 16 18 MERCRED 15h8 6 8 1 1 1 16 18 MERCRED 15h8 N A A 6 8 1 1 1 16 18 MERCRED 15h8 6 8 1 1 1 16 18 MERCRED 15h8 N A A N L N L N L N L N L N L EXAMPLE OF NSTALLATON nstallation of x GT boilers connected in cascade, with circuits with mixing valve and 1 DHW circuit, downstream of a disconnecting cylinder 1-stage burner 1-stage burner DEMATC DEMATC FM8 FM8 FM8 FM8 AD 1 -stage / modulating burner -stage / modulating burner DEMATC DEMATC FM8 AD1 FM8 AD 1 AD 1 AD 1 AD 1 (1) (1) 1 Key BUS Cable AD1 1 1 V single phase 1 6 1 6 Slave boiler 5 16 18 1 Heating flow Heating return -bar safety valve Manometer Automatic air vent 8 Manual air vent Valve 1 -way mixing valve 11 Heating pump 16 Expansion tank 1 Drainage valve 18 Filling the heating circuit 1 Outside temperature sensor Control unit boiler sensor Outlet temp. sensor downstream of the mixing valve Primary input on the DHW calorifier exchanger V single phase 1 AD 18 8 1 65 5 11 1 5 Primary output on the DHW calorifier exchanger 6 DHW load pump Non-return valve 8 Domestic cold water inlet Pressure reducer Sealed safety device DHW loop pump (optional) DHW temperature sensor 6 Motorised gate valve njection pump Thermostat limiting the temperature to 65 C with manual reset for underfloor heating 6 -way -position directional valve 5 Disconnector 51 Thermostatic valve 65 5 11 1 65 5 11 1 5 Differential valve (only with module fitted with a -speed pump) 56 DHW circulation loop return 61 Thermometer 65 Low temperature circuit (radiator or underfloor heating) 5 Domestic water pump 81 Electrical resistance 8 Stop cock with unlockable nonreturn valve 85 Primary solar circuit pump (for connection to SOL PLUS solar regulation) 8 Safety valve calibrated to 6 bars 88 Solar circuit expansion tank 8 Container for solar fluid 65 5 11 1 6 5 Antithermosiphon lyre (= 1 x Ø pipe) 1 Thermostatic mixer tap 11a Solar collector sensor 1 Cascade outlet sensor 16 Solar control unit 1 Manual air vent (Airstop) 11 Collector field 8 no outside sensor with B and B control panels (1) PCB delivered as standard with GT 6 D to 8 D boilers + AD1, available as optional equipment for other models of boiler GT_F 1/16 111B.555.55 Strasbourg Companies Register Document not contractually binding - Printed in France - OTT mprimeurs 61 Wasselonne - 1655 DE DETRCH THERMQUE S.A.S. with corporate capital of 8 61 5, rue de la Gare - F-658 MERTZWLLER Tel. + 88 8 - Fax + 88 8 www.dedietrich-heating.com SUSTANABLE COMFORT