CNC GEAR HOBBING MACHINE MODEL : GHO-200 2010. 4. 6
CNC GEAR HOBBING MACHINE MODEL : GHO-200 Offer No. : Elaborated for : Page no. 2
List of Contents 1. APPLICATION ---------------------------------------------------------- 4 2. BASIC TECHNICAL APPLICATION --------------------------------------- 5 3. TECHNICAL DESCRIPTION OF MAJOR UNIT OF MACHINE TOOL ------ 6 3.1 HOB HEAD UNIT 3.2 TAIL STOCK UNIT 3.3 TABLE UNIT 3.4 BED UNIT 3.5 COLUMN UNIT 3.6 LUBRICATION SYSTEM 3.7 HYDRAULIC SYSTEM 3.8 HOBBING JIG 3.9 CENTERING UNIT 3.10 INTERACTIVE PROGRAMMING ENVIRONMENT 3.11 CNC CONTROL SYSTEM 4. MACHINE TOOL EXECUTION -------------------------------------------- 11 5. STANDARD EQUIPMENT ------------------------------------------------- 13 6. OPTIONAL EQUIPMENT -------------------------------------------------- 14 7. WARRANTY --------------------------------------------------------------- 17 8. TRAINING ----------------------------------------------------------------- 18 9. RELATED DOCUMENTATION TO PURCHASE ORDER -------------------- 18 Page no. 3
1. Application The GHO-200 CNC Gear Hobbing Machine is designed to perform high speed, precision hobbing for automotive gear parts. The following operations according to a technological program are able to be done on the machine tool : - Spur gear - Helical gear - Small Cone gear - Crown gear - Sprocket The machine tool is provided with the following CNC axes : X-axis : column travel, Y-axis : Hob shift Z-axis : hob head A-axis: Hob head swivel C-axis: Table rotation The below figure presents the CNC axes and the directions of its motions. Page no. 4
2. Basic Technical Specifications GHO-200 2.1 TYPE - Ver. CNC GEAR HOBBING M/C 2.2 Max. work-piece diameter /kg Ø 200 2.3 Max. module - M4.5 2.4 Table diameter Ø 240 2.5 Z-axis travel(axial) 350 2.6 X-axis travel(radial) 200 2.7 Hob swivel angle deg MAX±45 2.8 Hob arbor taper - NT NO.40 2.9 Max. hob diameter/length Ø 180/190 2.10 HOB shift travel 170 2.11 Max. hob speed rpm 1500 2.12 Max. table speed rpm 230 2.13 TAIL STOCK stroke 380-780 2.14 Z-axis rapid feed rate m/min 12 2.15 X-axis rapid feed rate m/min 12 2.16 Y-axis rapid feed rate(hob shift) /sec 4.2 2.17 Travel distance from table surface to hob center(z-axis) 200-550 2.18 Travel distance from table center to hob center(x-axis) 15-215 B-axis(Hob spindle) kw AC12/16 A-axis(hob head swivel) Nm 6/10:1 Z-axis Nm 27 /2:1 X-axis Nm 27 2.19 MOTOR C-axis Nm 410 Y-axis(hob shift) Nm 6/10:1 Lubrication kw 0.2 Coolant kw 0.9 Hydraulic kw 3.7/2.2 2.20 Hob head fixation ton 7.6 2.21 Tail stock fixation ton 1.5 2.21 Work-piece fixation Ton 3.3ton(Ø 120 CYLINDER) 2.22 Number of Axes controlled by CNC - 5(X, Y, Z, A, C) 2.23 CNC CONTROL SYSTEM - SIEMENS 840D/FANUC 18iMB 2.24 Floor space(l W H) 2702 3360 2810 2.25 Machine weight kg 9,000 Page no. 5
3. Technical Description of Major Unit of Machine Tool 3.1 Hob head Material : Cast iron & Steel Hob spindle motor : 1PH7133-2ND03-0BC2(SIEMENS) 12/16kW Hob spindle bearing : B7017E. TPA. P4. UL Hob spindle gear ratio : 3:1 Hob shift clamp : Disc spring(4 position), Clamping power 7.6ton Hob swivel clamp : Disc spring(6 position), Clamping power 7.3ton 3.2 Tail stock Material : Cast iron & Steel Tail stock up/down cylinder : 35H-31FB63B400 (Clamp power at 30 bar : 840kgf) Tail stock spindle bearing : B7010E.TPA.P4.UL Tail stock clamp : Disc spring, Clamping power 1.5ton Page no. 6
3.3 Table(C-axis) Material : Cast iron & Steel Table(C-axis)Motor type : Built-in torque motor(direct-drive motor) Table spindle bearing : NNU4938K P4 Table resolution : 0.001 3.4 Bed Material : Cast iron Weight : 3,040kg X-axis Ball screw : Ø50 x 907(Maker: CBC) X-axis Ball screw bearing : 40TAC 90B DFD C10PN7A(Maker: NSK) 3.5 Column Material : Cast iron Weight : 1,850kg Z-axis Ball screw : Ø50 x 850(Maker: CBC) Z-axis Ball screw bearing : 40TAC 90B DFD C10PN7A(Maker: NSK) Page no. 7
3.6 Lubrication System Lubrication tank for slideway - Maker : Hansung - Spec : HMGP303S-01-T12-F/P-F220 Lubrication tank for spindle gear box - Maker : Hansung - Spec : HMTP-3M-200-13MAVB(400x500x250) 3.7 Hydraulic System Main Pump - Maker : NACHI - Spec : PVS-1B-22NS Sub Pump - Maker : SHIMADZU - Spec : YP10-2.5A2H2 -R Sol V/V - Maker : NACHI - Spec : SS-G01-C5-R-C1-31(1EA), SS-G01-C6-R-C1-31(2EA), SS-G01-A3X-C1(4EA) Hyd. Actuator - Hob head unclamp, Hob swivel unclamp, Hob arbor unclamp, Hob arbor support Clamp/Unclamp, Tailstock Unclamp, Tailstock up/down, Work Clamp/Unclamp Page no. 8
3.8 Hobbing jig Maker : S&T Type : Collet, Face drive, Manual, Work arbor and Special type 3.9 Hob centering unit Maker : S&T 3.10 Interactive Prograing Environments - Additional prograing is not necessary. And gear processing is easy with just the input of specifications of hob cutter, workpiece, and cutting condition 호브데이터 공작물데이터 변수설명 입력항목 단위 변수설명 입력항목 단위 HOB_DIA 호브외경 NO_TEETH 잇수 HOB_WEAR 호브마모량 MODULE 모듈 NO_THREAD 호브줄수 H_ANGEL 비틀림각 deg LEAD_ANGLE 호브리드각 deg P_ANGLE 압력각 deg SHIFT_TYPE 호브시프트유형 ROOT_DIA 치저경 SHIFT_VOL 호브시프트량 WORK_DIA 공작물외경 CUT_NO_SH 1 회시프트당가공횟수 EA WORK_WIDTH 공작물절삭폭 START_POS 아버게이지라인에서유효호브날시작부까지길이 CROWN 크라운량 END_POS 아버게이지라인에서유효호브날끝부까지길이 CROWN_H TAPER 크라운중심점높이테이퍼량 호브줄수, 리드각 : - (LH HOB), +(RH HOB) 호브시프트유형 : 1: (+) 방향, 2: (-) 방향, 3: (+)(-) 왕복 모듈 : +(Metric), - (Diameterical Pitch) 비틀림각 : - (LH GEAR), +(RH GEAR) 절삭조건데이터 (1) 절삭조건데이터 (2) 변수설명 입력항목 단위 변수설명 입력항목 단위 RTP_X X 축가공시작, 종료점 1ST_RPM 1 CUT 시호브회전수 RTP_Z Z 축가공시작, 종료점 2ND_RPM 2 CUT 시호브회전수 VARI 가공방법 X_FEED X 축방향절삭이송속도 /rev APPROACH 어프로치량 Z_1ST_FEED 1 CUT 시 Z 축이송속도 /rev OVER RUN 오버런량 Z_2ND_FEED 2 CUT 시 Z 축이송속도 /rev W_LOW_POS 기계원점에서공작물밑면까지의거리 FIN_CUT UP_SOLID 2 CUT시정삭여유량가공상단점위치에서테이블 1회전한후후퇴 DOWN_SOLID 가공하단점위치에서테이블 1 회전한후후퇴 가공방법 : 1(UP CUTTING), 2(DOWN CUTTING), 3(UP-DOWN 2 CUTTING) 3(DOWN-UP 2 CUTTING), 4(UP-UP 2 CUTTING) UP_SOLID : 0( 사용안함 ), 1( 사용함 ) DOWN_SOLID : 0( 사용안함 ), 1( 사용함 ) Page no. 9
3.11 CNC Control System Controller : FANUC 18iM-B or SIEMENS 840D Controlled axis : 6-axis Simultaneous controlled axis : 4-axis Display unit : 8.4 Color LCD Page no. 10
4. Machine Tool Execution 4.1 Electrical equipment is adapted to the following parameters - Working voltage 3 x 220V - Frequency 60Hz - Control voltage AC 110V - Climate conditions +10 ~ +35 NOTE: The other parameters to be agreed. The working voltage and the frequency have to be finally specified in the Purchase Order. The adaption of the machine tool to the other voltage and/or frequency requires considerable modifications and results in higher costs. 4.2 Standard paint of the machine tools is as follows: - Fixed elements Dark Gray (8.3B 4.5/0.9) - Movable elements Bright Gray (2.2B 7.1/0.7) - Platform, ladders White(2.2B 8.8/0.6) 4.3 Technical acceptance of the machine tools at Manufacturer s site will be carried out by S&T Dynamics Quality Control Department. 4.4 The geometrical accuracies of the machine tools will be checked according to KS standard defining the testing conditions of machine tools under no load or during finish machining conditions. The geometrical accuracies of machine tools will be checked in ambient temperature of 20 ±1. Temperature fluctuation before 12 hours and during entire course of tests will not exceed 1. All thermal influences on tested machine tools from one side or draughts will be eliminated. Maximum gradient of changes in air temperature is 1 at change in attitude by 5m. The machine tool will be installed on foundation separated from thermal influences, vibrations or shocks Page no. 11
from external sources. 4.5 Positioning accuracies of assembly units of the machine tools will be tested in identical environmental conditions as those of the geometrical accuracies. 4.6 Preliminary acceptance of machine tools at Manufacturer s will be carried out using both work piece and tools under the conditions complying with KS standard. 4.7 Final acceptance of the machine tool will be carried out at Purchaser and will include the following: - The geometry check of machine tools - Test of machining accuracies using test work piece. Optionally, the acceptance tests may include machining of a Purchaser s regular work piece. Purchaser is to supply work piece, tools and fixtures and machining software. Optionally, the machining software can be elaborated during at site training as a result of co-operation between the Purchaser s and Contractor s prograing engineers. 4.8 Machine tools will be executed according to the Korean standards of industrial safety regulations and a CE declaration will be provided. 4.9 S&T Dynamics has been awarded with the following certificates: - Quality System Certificate issued by Korean Foundation for Quality conforming accordance with KSA 9001:2001 ISO 9001:2000 standard. - Environmental Management System certificate issued by Korean Foundation for Quality conforming according with KS A ISO 14001:2004 ISO 14001:2004 standard. 4.10 The Manufacturer reserves a right to introduce any of changes in the design of machine tools and the offer conditions resulted from the Purchaser s additional requirements. Page no. 12
5. Standard Equipment No. Description of Equipment Price in USD 5.1 Main body 5.2 Full splash guard 5.3 Hob arbor set(ø25.4) 5.4 Leveling bolt & Base plate 5.5 Standard tool kit 5.6 Work light 5.7 Oil cooler 5.8 Hob centering unit 5.9 M.Q,.L unit 5.10 Base jig(collet type) 5.13 SIEMENS 840D 5.14 Operation and Maintenance Manual 5.15 CNC system operating and prograing documentation Total Assembly, Installation, Coissioning, Training, Tests and Acceptance at Purchaser s site Note : costs of accoodation and travels of Manufacturer s Installation Team is not included Page no. 13
6. Optional Equipment CODE NAME Price in USD Maker : CHANGYONG Magnetic separator Type : Block magnet type Maker : YHB Model : YOC-350 Oil mist collector Hob arbor set *. Maker : S&T *. Model : Ø22, 22.225, 27, 31.75, 32, 38.1, 40 SPECIAL - Ø12.7, 13, 16, 19.05 *. Maker : S&T Hobbing jig *. Model : User specification Page no. 14
*. Maker : DTR Hob cutter *. Model : User specification *. Maker : SMC, TPC Auto door Transformer *. Maker : SUNJIN TRANS *. Model : 60kVA Deburring unit *. Maker : S&T *. Maker : S&T Skiving sensing unit Page no. 15
*. Maker : S&T Auto loading system *. Model : User specification *. Maker : MASTERTEC *. Model : MSCC-3000F Coolant oil cooler Page no. 16
7. Warranty 7.1 The product liability for the supplied machine tool expires after 12months from a date of positive acceptance at Purchaser s site, but not later than 18months from a date of delivery. Extension of the warranty period by each next 12 months results in price increase by 5% of a subject of delivery. 7.2 Contractor guarantees free-of-charge after sales servicing of the machine tool during warranty period and coercial services after the warranty expires. Response time of after sales service - 24 hours in Korea - 72 hours outside Korea, Page no. 17
8. Training 8.1 Training by Machine Tools Manufacturer The Manufacturer will submit the training program for the Purchaser s personnel carried out by the Manufacturer. The training amounting received by the operators and maintenance staffs of the Purchaser. during the machine tool coissioning at the Purchaser s site 9. Related Documentation to Purchase Order 9.1 The scope of delivery according to items 5.14 and 5.15 of the Standard Equipment covers the following: - Operation and Maintenance Manual related to machine tools including the mechanical, hydraulic and electrical parts - CNC system operating and prograing documentation - Remaining documents related to the Purchase Order, e.g. packing list, shipping documents, etc. Page no. 18