PERIMETER m i n i c a t a l o g u e
PERIMETER PROTECTION Aritech have for many years been recognised as a market leader in the commercial security market. The performance of the mirror based PIR s and dual technology detectors, as well as the highly performing CD range of control panels and support equipment, has maintained our leading position as the preferred supplier to the professional security industry. Perhaps not so well publicised is that Aritech have also for many years been active in the perimeter security segment and have built up an excellent reputation as a supplier of innovative perimeter detection products. Many customers today recognise the need to identify potential intruders at the perimeter, long before they have had the opportunity to cause damage or theft. Perimeter security however is not only limited to the high profile applications of airport / power stations / prisons / bond warehouses / distribution centres / car parking / etc., but also in general commercial and high end residential applications. In discussion with customers, it can be seen that applications are as varied as the imagination. It is our aim therefore to provide you with the innovative products required to take best advantage of these opportunities. With this in mind, we currently support the market with two different technologies: 1. INTELLI-FLEX SENSOR CABLE JUNCTION JUNCTION SENSOR CABLE THE INTELLIGENT FENCE SENSOR Intelli-FLEX - an intelligent fence sensor designed specifically to detect the cutting / climbing / lifting of a fence as well as the penetration of walls / ceilings and roofs. TERMINATOR CONTROL UNIT TERMINATOR FEED-IN CABLE NON-SENSITIVE DISTRIBUTOR DOME LIGHTS VENTILATION SHAFT BOARDER LIGHTS zone I outdoor area central control lines, voltage supply synchronisation lines voltage supply for heaters DOME LIGHTS zone II entrance ROLLING GATE DISTRIBUTOR Integration of infrared barriers into security system 2. A COMPREHENSIVE RANGE OF AIR Active Infra Red beams are ideal for the detection of either casual or deliberate perimeter intrusion. Unobtrusive, yet with a high probability of detection and virtually no nuisance alarms, AIR beams make an ideal choice for a wide range of perimeter protection applications. 2
Intelli-FLEX the intelligent fence sensor Intelli-FLEX is an outdoor perimeter security system that really works! Intelli-FLEX uses advanced microprocessor technology in combination with a unique, proprietary coaxial cable detector mounted on chain link or weld mesh fences. By analysing the various signals that are generated by the proprietary sensor cable in response to fence activity, the Intelli-FLEX signal processor s Adaptive Algorithms can differentiate between environmental conditions and genuine encroachment including: Attempts to cut through a fence Attempts to climb over a fence Attempts to lift the fence fabric Attempts to penetrate a wall, ceiling and roof The Intelli-FLEX signal processor provides failsafe detection circuitry and calibration capability for two completely independent zones. Although pre-programmed for typical intrusion scenarios, the microprocessor s detection parameters can be easily modified on-site to any local conditions and security requirements using a separate, hand-held plug-in programming module. Easy to install and easy to use, Intelli-FLEX is a reliable outdoor security approach that really works. The Intelli-FLEX system is a low-cost solution for demanding security applications such as airports, correctional institutions, military bases, power plants, communication sites, and other commercial and industrial facilities. Intelli-FLEX is the Worldwide Standard in Smart, Outdoor Perimeter Security Systems Intelli-FLEX is the latest of a range of high-end perimeter intrusion detection systems and is the most reliable fence disturbance sensor on the market today. Intelli-FLEX System Operation Each Intelli-FLEX zone (two per processor) can be connected to up 300 metres of proprietary sensor cable. This length of cable will protect approximately 275 meters of 2.5 meters high fence. In most cases, facility perimeters are configured in shorter zones to match CCTV assessment capabilities and to allow rapid response to the area of intrusion attempt. For long perimeters, multiple zones of the Intelli-FLEX sensor can be monitored and controlled over copper or fiber optics using the Intelli-FLEX signal processor's built-in multiplex communication.
System Supervision and Self Test Individual zones report any damage to the sensor cable, or tampering with the signal processor by associated supervision alarms. A terminator, located at the end of each zone's sensor cable, permits the signal processor to supervise the integrity of each zone. An optional remote test terminator not only performs this function, but also generates a simulated intrusion signal in response to a central command. The remote test terminator tests and verifies the performance of the entire Intelli-FLEX sensor. These tests can also be initiated at each signal processor location using the hand-held plug-in programming module. "Listen-In" Audio Assessment Module Intelli-FLEX offers a unique and beneficial audio option. The microphonic properties of the sensor cable allow direct audio listen-in assessment of possible breaches to the protected perimeter. A simple audio module, designed to drive a long line such as a telephone interface, can be inexpensively added to any Intelli-FLEX signal processor. Install Intelli-FLEX for years of effective operation Installation of an Intelli-FLEX system is quick and easy. The proprietary sensor cable can be directly attached to the fence fabric using UV-resistant tiewraps, or installed in conduit. There is no need to weave the cable in and out the fence. The sensor cable is a high quality, high performance transducer designed specifically for long term outdoor operation. PRODUCT SPECIFICATION DF 420 DF 901 DF 906 Application Internal External External Number of zones 1 2 2 Total monitored cable length 1 x 300 m 2 x 300 m = 600 m 2 x 300 m = 600 m Voltage 10.5 to 15 V d.c. 18 to 56 V d.c. 18 to 56 V d.c. Current 90 ma 50 ma @ 18 V d.c. 50 ma @ 18 V d.c. 15 ma @ 56 V d.c. 15 ma @ 56 V d.c. Operating temp. -10 C to +60 C -40 C to +70 C -40 C to +70 C Adjustable operating Yes Yes - via Yes - via parametres - sensitivity, programming interface programming interface number of cuts, climb time, etc. Audio module accessory No Yes Yes Housing NEMA4 NEMA4 NEMA4 - stainless steel Dimensions 20 x18 x 2.7 cm 28 x 23 x 12.7 cm 28 x 23 x 12.7 cm SYSTEM COMPONENTS DESCRIPTION DF 420 - Indoor E-Flex processor DF 901 - Dual zone Intelli-flex processor DF 906 - As per DF901 but with stainless steel housing DF 924 - Programming interface with parameter display DF 902 - Plug-in audio module DF 811-300 m reel of sensor cable (Processing zones monitor up to 300 m of transducer cable). Complete range of accessories available FEATURES High probability of detection (Pd) Passive sensor technology assures complete immunity to interference (EMI and RFI) Microprocessor-controlled with non-volatile firmware Adaptive Algorithms virtually eliminate environmental nuisance alarms Common Mode nuisance rejection between adjacent zones Audio "Listen-in" capability for low-cost, remote assessment Compatible with all existing E-Flex installations Independent cut and climb threshold and parameter adjustments Relay outputs; copper or fiber optics, multiplex interface 4
AIR beams A comprehensive range of AIR beams and accessories Aritech offers the market the benefit of over 20 years of Active Infra Red perimeter product experience. The recent addition of the new Digitalk 2000 (a series of intelligent quad AIR beams) ensures that Aritech products maintain a leading edge over the competition and provide the very latest innovative solutions. SYSTEM PERFORMANCE What determines the performance of an AIR beam is the understanding and quality of 3 main system parts: 1 The Transmitter/Receiver elements Quality, high powered infra-red emitting diodes are used, operating at 940 nm, just above the spectrum observable through the human eye. 2 The optical system chosen One of several optical solutions may be used dependant on application/range. The optical physics of the Aritech beams using mirror and lens or parabolic mirrors are all well understood and optimised for system performance. 3 The signal processing Custom microprocessor control, incorporating the experience gained over the past 20 years, ensures excellent detection yet is insensitive to sunlight or other false alarm sources. PERIMETER SOLUTIONS With a wide variety of performance AIR beams and accessories, Aritech have the solution for your perimeter protection needs. SPECTRUM OF ELECTROMAGNETIC WAVES nm 380 violet wave length / nm Activ-IRalarm visible range IR-alarm 780 880 940 blue green yellow orange red 10-7 10-6 10-5 10-4 10-3 10-2 10-1 10 0 10 1 10 2 10 3 10 4 10 5 10 6 10 7 10 8 10 9 10 10 10 11 10 12 10 13 10 14 10 15 10 16 cosmic rays gamma rays X-rays ultraviolet infrared UKW range KW MW range LW NF range medical testing of material density measurement filler measurement sunlamp lighting medical radar technology broadcast TV multiple telephones 1300 5
Air New Product Development Considerable behind the scenes development has now resulted in both new and upgraded products. Many of the Aritech AIR beams have had their electronics significantly improved with respect to RFI rejection, line induced interference, lightning rejection etc. For those of you familiar with the specification and coding of our AIR beams, we have simply coded these beams with a suffix N for New. The technical advances however on our latest family of quad AIR beams deserve a new reference - the Digitalk 2000 series. Developments include: higher efficiency and higher powered AIR transmitters/receivers, sophisticated processing, simple and precise mechanical alignment, user friendly LED power display, wireless display accessory for one man alignment and much, much more. Supported by a wide range of accessories, we believe we have the AIR beam for your needs. DO 505 / 505M DG 2100 / 2100M & DG 2200 / 2200M NEW The DO 505 has twin beams, from transmitter to receiver. Both must be interrupted simultaneously to generate an alarm. This results in a very high immunity to false alarms while maintaining an excellent detection performance. Two high capacity transmitter diodes generate simultaneous pulses of IR energy. The parabolic mirrors are hermetically sealed in providing high performing optics. This barrier combines sophisticated technology with easy mounting and efficient operation. DUAL BEAM OPERATION HEATING ELEMENTS SUPPLIED STAND-ALONE AND PILLAR VERSION (M) RANGE: 100 METRES INDOORS / 75 METRES OUTDOORS The DG 2100/2200 units are highly featured with built-in fog disqualification circuitry, 4 field selectable channels available as standard, built-in signal strength meter and heaters. Available in both stand-alone and pillar-versions (M). It incorporates 4 powerful AIR-beams per system. In order to simplify the alignment procedure when long distances are concerned, an optional radio accessory is available to monitor signal levels remotely, allowing for one person alignment. 4 POWERFUL AIR TRANSMITTERS/BEAMS SWITCHABLE AIR TRANSMISSION POWER LOW/HIGH SIMPLE AND PRECISE HORIZONTAL AND VERTICAL ALIGNMENT. LOGARITHMIC POWER DISPLAY QUICKLY ALIGNS THE SYSTEM TO MAXIMUM POWER. FOG DISQUALIFICATION OUTPUT TECHNICAL ALARM OUTPUT RANGE: DG2100/2100M - 100M OUTDOORS, DG2200/2200M - 200M DO 500N UPGRADED This model shares the processing of the D0 510, but has been designed especially for indoor applications. ADJUSTABLE OPTICS ADJUSTABLE REACTION TIME RANGE: 80 M - INDOOR APPLICATIONS ONLY D0 510N / DO 515N UPGRADED The DO 510N forms the basis of the mirror/lens based products with a full range of features and accessories as expected from a product designed for external security applications. This unit operates with a single high power Tx/Rx beam. The DO 515N has been specified for "off the shelf" purchases, fully specified for outdoor applications. In principle it is a DO 510N with a lens heater and fog disqualification board already fitted. ADJUSTABLE OPTICS ADJUSTABLE REACTION TIME FOG DISQUALIFICATION CIRCUITRY LENS HEATER RANGE:160 METRES INDOORS / 100 METRES OUTDOORS 6
DO 530N UPGRADED The DO 530N has been specially featured for pillar applications. It shares the same processing as the D0 510N, also supported with a full range of accessories. ADJUSTABLE OPTICS ADJUSTABLE REACTION TIME SPECIALLY DESIGNED FOR PILLAR APPLICATIONS OPTIONAL FOG DISQUALIFICATION CIRCUITRY OPTIONAL LENS HEATER RANGE:160 METRES INDOORS 100 METRES OUTDOORS FULL RANGE OF ACCESSORIES DO 560N / 560MN UPGRADED This VdS approved product has been featured to ensure the highest level of security. A synchronisation cable is connected between transmitter and receiver in order to ensure that there is no tamper interference with the A.I.R. transmitted signal. Additionally, up to 4 beams can be installed in any link without crosstalk between units. At the receiver the alarm sensitivity can be selected from steps (20, 50, 150 or 300 ms). VdS APPROVED A.I.R. SIGNAL PROTECTED UP TO 4 BEAMS PER LINK STAND-ALONE AND PILLAR VERSIONS (M) TECHNICAL ALARM OUTPUT IN CASE OF MALFUNCTION RANGE: 160 METRES INDOORS / 100 METRES OUTDOORS Pillars for AIR Beams: DO 505M / DG 2100M / DG 2200M OPENINGS ON 3 SIDES. INCLUDES STEEL PILLAR, PLASTIC PANELS, TOP COVER, TAMPER CONTACT AND FIXING MATERIALS. DO 891 DO 892 DO 893 DO 894 DO 895 DO 903 DO 904 DO 905 DO 916 DO 865 Pillar, 3 views, length 1 metre As DO 891, length 1,5 metres As DO 891, length 2 metres As DO 891, length 2,5 metres As DO 891, length 3 metres Pillar heating element, 12 V ac/dc, 800 ma Pillar heating element, 24 V ac/dc, 400 ma Pillar heating element, 48 V ac/dc, 250 ma Pair of tamper switches for top and bottom of pillar Floor socket for mounting pillar DO 530N / 560N DO 751 Moulded column, 1 view, length 1 metre DO 814 DO 752 As DO 751, 1,5 metres DO 815 DO 753 As DO 751, 2 metres DO 816 DO 754 As DO 751, 2,5 metres D0 754-2 As DO 751, 3 metres DO 590 DO 765 Floor socket; 3 view on concrete DO 781 Moulded column, 3 views, length 1 metre DO 782 As DO 781, 1,5 metres DO 783 As DO 781, 2 metres DO 784 As DO 781, 2,5 metres D0 785 As DO 781, 3 metres DO 809 Pillar heating element 12 V ac/dc, 450 ma DO 810 Pillar heating element 36 V ac/dc, 240 ma DO 811 Pillar heating element 48 V ac/dc, 150 ma Base cover for wall mounted pillar Top cover Set of 2 tamper switches for top and bottom of column Standard column assembly comprising 2 x DO 753 columns 2 x DO 530N detectors 2 x DO 809 column pane heating elements 2 x DO 816 tamper switch sets 2 x DO 820N plug-in disqualification board with lens heaters, thermostat control; 10-16 V ac/dc, 170 ma 2 x DO 817 connector boards Others available on request 7
ACCESSORY DESCRIPTION DO 501/511/516/531 DO 502 DO 512N/517N/532N DO 503/513 DO 801 DO 803 DO 817 DO 820N Spare Transmitter Spare Receiver Spare Receiver Retro reflector - for up to 20 m range Alignment light Plug-in lens heater with thermostatic control; 10-16 V ac/dc, 160 ma Connector board for use in pillars Plug-in lens heater with thermostatic control; 10-16 V ac/dc, 170 ma; with disqualification DO 823N DO 825N DO 900 DO 901 DO 902 DO 906 DO 907 DO 908 TM 700 DG RF1 Plug-in lens heater with thermostatic control; 10-16 V ac/dc, 180 ma; with disqualification and alarm memory Alarm memory board (indoor use only); 12 V ac/dc, 10 ma Heating element standard (for pillar version); 12 V, 800 ma Heating element (for pillar version); 24 V, 400 ma Heating element (for pillar version); 48 V, 250 ma Heating element (standard); 12 V, 250 ma Heating element; 24 V, 150 ma Heating element; 48 V, 80 ma Test meter for precise alignment Wireless display for alignment ACCESSORY AVAILABILITY DO 505/M DG 2100/M DG 2200/M DO 500N DO 510N DO 515N DO 530N DO 560N/MN Retro reflector DO 503 DO 513 Spare Transmitter DO 501 DO 511 DO 516 DO 531 Spare Receiver DO 502 DO 512N 00517N DO 532N DO 801 Y Y Y Y Y DO 803 Y Y Y Y DO 817 Y Y/M DO 820N Supplied (M) Y Y DO 823N Y Y Y DO 825N Y Y DO 900 Supplied (M) Supplied (M) Supplied (M) Y DO 901 Y Y Y DO 902 Y Y Y DO 906 Supplied (M) Supplied (M) Supplied (M) DO 907 Y Y Y DO 908 Y Y Y TM 700 Y Y Y Y Y Y DG RF1 Y Y PRODUCT SPECIFICATION DO 505/M DG 2100/M DG 2200/M DO 500N DO 510N DO 515N DO 530N DO 560N/MN Range outdoors 75 m 100 m 200 m NA 100 m 100 m 100 m 100 m Range indoors 100 m 100 m 200 m 80 m 160 m 160 m 160 m 160 m Number of beams 2 4 4 1 1 1 1 1 Voltage (V ac/dc) 10-18 11-24 12-24 10-16 10-18 10-18 10-16 10-16 Current per pair 50 ma 70 ma 70 ma 45 ma 55 ma 55 ma 55 ma 55 ma IR wave length 940 nm 940 nm 940 nm 940 nm 940 nm 940 nm 940 nm 940 nm Peak optical power 170 mw 140 mw 220 mw 170 mw 170 mw 170 mw 170 mw 170 mw Parabolic mirror Y Y Y - - - - - Aspheral crystal lens - - - Y Y Y Y Y IR divergence angle 2,5 2,5 2,5 2,1 2,1 2,1 2,1 2,1 Adjustm. angle horiz. ~90 ~90 ~90 ~95 (*) ~95 (*) ~95 ~95 ~95 Adjustm. angle vert. ~15 ~15 ~15 ~10 ~10 ~10 ~10 ~10 Fog discrimination N Y Y N Option Y Option Option Channel selection N Y Y N N N N Reference Adjust sensitivity Y Y Y Y Y Y Y - Integral heater Y Y Y N Option Y Option Option Alarm & tamper output Y Y Y Y Y Y Y Y IP rating 33 33 33 54 54 54 54 54 Operating temp -30 C to +80 C -30 C to +80 C -30 C to +80 C -30 C to +80 C -30 C to +80 C -30 C to +80 C -30 C to +80 C -30 C to +80 C Dimensions (mm) 203 X 95 X 91 400 X 95 X 97 400 X 95 X 97 140 X 55 X 55 173 X 60 X 60 173 X 60 X 60 173 X 60 X 60 173 X 70 X 60 SLC Technologies U.K. Ltd. Unit 5, Ashton Gate, Ashton Road Harold Hill, Romford, Essex RM3 8UF Tel. 01708-381496 - Fax 01708-381371 Aritech Ireland Ltd. Taurus Business Centre Greenhills Road Tallaght, Dublin 24 Tel. 01-4599.760 - Fax 01-4527.448 MC-Perimeter 03