IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the requirements of applicable codes and standards. This activity is coupled with periodic surveillance of the supplier's factory and warehouses as well as the assessment of the supplier's Quality Assurance System. This listing is subject to the conditions set forth in the characteristics below and is not to be construed as any recommendation, assurance or guarantee by IAPMO Research and Testing, Inc. of the product acceptance by Authorities Having Jurisdiction. The most updated information on this Certificate of Listing is available online at pld.iapmo.org Effective Date: June 2017 Void After: June 2018 3124 Valley Avenue Winchester, VA 22601 Identification: Plumbing supply fitting shall be marked with the manufacturers recognized name, trademark, or other mark or, in the case of private labeling, the name, trademark, or other mark of the customer for whom the fitting was manufactured. The marking shall be accomplished by use of a permanent mark or by placing a permanent label on the product. Markings on supply fitting shall be visible after installation. Single handle, single control, and automatic compensating mixing bath and shower valves shall have identifiable temperature control settings in which the settings are indicated by words cold, warm, hot, by numbers, or graphically. Packaging shall be marked with the manufacturers recognized name, trademark, or mark of the consumer for whom the fitting was manufactured as well as the model number. The product shall also bear the cupc certification mark. Characteristics: Plumbing fittings are to be installed in accordance with the manufacturer's instructions and the requirements of the latest edition of the Uniform Plumbing Code. Products listed on this certificate have been tested by an IAPMO R&T This listing period is based upon the last date of the month indicated on the Effective Date and Void After Date shown above. Any change in material, manufacturing process, marking or design without having first obtained the approval of the Product Certification Committee, or any evidence of non-compliance with applicable codes and standards or of inferior workmanship, may be deemed sufficient cause for revocation of this listing. Production of or reference to this form for advertising purposes may be made only by specific written permission of IAPMO Research and Testing, Inc. Any alteration of this certificate could be grounds for revocation of the listing. This document shall be reproduced in its entirety.
recognized laboratory. This recognition has been granted based upon the laboratory's compliance to the applicable requirements of ISO/IEC 17025. Products are in compliance with the following code(s): Uniform Plumbing Code (UPC ) National Plumbing Code of Canada International Plumbing Code (IPC ) Products are in compliance with the following standard(s): ASME A112.18.1-2012/CSA B125.1-12
MODELS: TECHNICAL CONCEPTS Commercial Lavatory Set: Description 1782742 Milano Automatic Faucet (AFCT SST MV-HC CP LOW LEAD TC) 1782743 Milano Automatic Faucet (AFCT SST MV-HC CP LOW LEAD TC) 1782744 Milano Automatic Faucet (AFCT SST MV-HC CP LOW LEAD TC) 1789162 Shank and Spout 401818-UPC TC SST AutoFaucet Milano Basic Model (0.5 GPM PC Spout, Valve Box, 6VDC Battery Box, No Cover Plate, No Mixing Valve, No Supply Hoses) 500483-UPC TC SST AutoFaucet Milano Single Hole (0.5 GPM PC Spout, Valve Box, 6VDC Battery Box, No Cover Plate, Std Mixing Valve, Supply Hoses) 500484-UPC TC SST AutoFaucet Milano w/ 4 Cover Plate & Mixing Valve (0.5 GPM PC Spout, Valve Box, 6VDC Battery Box, Cover Plate, Std. Mixing Valve, Supply Hoses) 500485-UPC TC SST AutoFaucet Milano w/ 8 Cover Plate & Mixing Valve (0.5 GPM PC Spout, Valve Box, 6VDC Battery Box, Cover Plate Std. Mixing Valve, Supply Hoses) Retrofit or OEM Components: Description 490125 SST Single Valve Box Commercial 490144 SST Single Valve Box Commercial (Ground Wire Kit and Battery Box) 490144-NSF SST Single Valve Box Commercial (Ground Wire Kit and Battery Box) 490251 SST Single Valve Box Commercial Spare Part/Replacement (w/o Battery Box) 490398 SST Milano PC Spout Assy 0.5 GPM Laminar Commercial 490401 SST Capri PC Spout Assy 0.5 GPM Laminar Commercial 490402 SST Sienna PC Spout Assy 0.5 GPM Laminar Commercial 490403 SST Verona PC Spout Assy 0.5 GPM Laminar Commercial 490179 SST Mixing Valve (Flow Control) 402188 SST Thermostatic Mixing Valve (TC Thermostatic) 402188-NSF SST Thermostatic Mixing Valve (TC Thermostatic) 500546 SST Dual Valve Box Residential Retrofit (is sold to OEMs for their kits) 500546-NSF SST Dual Valve Box Residential Retrofit (is sold to OEMs for their kits) 500570 SST Single Valve Box Residential Retrofit (is sold to OEMs for their kits) 500570-NSF SST Single Valve Box Residential Retrofit (is sold to OEMs for their kits) FG401818 FG500480 FG5000483 FG500615 Page 3 of 5
FG750594 FG500478 FG500481 FG500484 FG500616 FG750399 FG500479 FG500482 FG500485 FG500617 FG750595 Description 1903286 AFCT MILANO CP LOW LEAD RCP 1903287 AFCT MILANO MN HOSE CP LOW LEAD RCP 1903288 AFCT MILANO SST 4CP CP LOW LEAD RCP 1903289 AFCT MILANO 4-MN HOSE CP LOW LEAD RCP 1903290 AFCT MILANO 8-MN HOSE CP LOW LEAD RCP 1903291 AFCT MILANO SST 8CP CHM LOW LEAD RCP 1903292 AFCT MILANO DM 4 MV HC CP LOW LEAD RCP 1903293 AFCT MILANO SST 4CP MV HC LOW LEAD RCP 1903294 AFCT MILANO MV-HC SAT LOW LEAD RCP 1903295 AFCT MILANO 4-MV-HS SAT LOW LEAD RCP 1903199 AFCT MILANO 8-MV-HS SAT LOW LEAD RCP 1818966 AFCT MILANO TMV-HC CP LOW LEAD RCP 1818967 AFCT MILANO 4-TMV-HC CP LOW LEAD RCP 1818968 AFCT MILANO 8-TMV-HC CP LOW LEAD TC FG750613 AFCT VEN 3.5 WM 4-TMV-HC CP LOW LEAD RCP FG750353 AFCT VEN 5.5 DM TMV-HC CP LOW LEAD RCP FG500609 AFCT VEN DM MV-HC CP LOW LEAD RCP FG500611 AFCT VEN DM 8-MV-HC CP LOW LEAD RCP FG750095 AFCT VEN 5.5 DM 8-MV-HC CP LOW LEAD RCP FG500610 AFCT VEN 3.5 DM 4-MV-HC CP LOW LEAD RCP FG750099 AFCT VEN 5.5 DM MV-HC CP LOW LEAD RCP FG750355 AFCT VEN 5.5 DM 8-TMV-HC CP LOW LEAD RCP FG750354 AFCT VEN 5.5 DM 4-TMV-HC CP LOW LEAD RCP FG750096 AFCT VEN 5.5 DM 4-MV-HC CP LOW LEAD RCP 1903200 AFCT VERONA MV-HC CP LOW LEAD RCP 1903281 AFCT VERONA TMV-HC CP LOW LEAD RCP 1903282 AFCT VERONA 4-MV-HC CP LOW LEAD RCP 1903283 AFCT VERONA 4-TMV-HC CP LOW LEAD RCP 1903284 AFCT VERONA 8-MV-HC CP LOW LEAD RCP 1903285 AFCT VERONA 8-TMV-HC CP LOW LEAD RCP Page 4 of 5
ADDITIONAL COMPANY INFO: Bradley Fixtures Corporation Description 269-1918 Shank and spout S53-315 Auto Faucet w/surround Sensor Centershank S53-325 5.5 Automatic Faucet with Surround Sensor Technology Page 5 of 5