NÁVRHY NORIEM IEC PREDLOŽENÝCH NA VEREJNÉ PREROKOVANIE za obdobie od 1. augusta 2012 do 31. augusta 2012 Documents Title Closing Date 1/2213/FDIS Amendment 2 to IEC 60050-131: International Electrotechnical Vocabulary - Part 131: Circuit theory 2012-10-05 3C/1814/CD IEC 60417-C00262 Ed.1: Graphical symbol for electronic controlgear, sudio-frequency impredace 2012-11-16 9/1720/CDV 9/1729/CD IEC 61881-3 A1 Ed.1: Amendment 1 to IEC 61881-3 Ed.1: Railway applications - Rolling stock equipment - Capacitors for power electronics - Part 3: Electric double-layer capacitors IEC 60050-811 Ed.2, International Electrotechnical Vocabulary - Part 811: Electric traction IEC 60050-821 Ed.2, International Electrotechnical Vocabulary - Part 821: Signalling and security apparatus for railways 2013-01-18 9/1730/CD IEC 60310 Ed.4: Railway applications - Traction transformers and inductors on board rolling stock 20/1378/CD 20/1379/CD 20/1380/CD IEC 62821-1: Halogen free thermoplastic insulated and sheathed cables of rated voltages up to and including 450/750 V - Part 1: general requirements IEC 62821-2: Halogen free thermoplastic insulated and sheathed cables of rated voltages up to and including 450/750 V - Part 2: test methods IEC 62821-3: Halogen free thermoplastic insulated and sheathed cables of rated voltages up to and including 450/750 V - Part 3: flexible cables (cords) 23A/663/CDV Amendment 1 to IEC 61386-1 Ed.2: Conduit systems for cable management - Part 1: General requirements 2012-11-16 23B/1083/DTR IEC 60083 TR Ed.7: Plugs and socket-outlets for domestic and similar general use standardized in member countries of IEC 23E/757/CD IEC 62752 ed.1: In-Cable Residual Current Device for mode 2 charging of electric road vehicles (IC-RCD) 2012-11-16 31/1009/CD IEC 60079-29-1/Ed2: Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases 2012-11-16 Page 1 of 8
31J/210/CD IEC 60079-10-2/Ed2: Explosive atmospheres - Part 10-2: Classification of areas - Combustible dust atmospheres 2012-11-23 34A/1608/FDIS Amendment 1 to IEC 62031 Ed 1: LED modules for general lighting - Safety specifications 34A/1605/CDV IEC 62707-1 Ed. 1: LED - Binning - Part 1: General requirements and white grid 2013-01-11 34A/1602/CDV Amendment 5 to IEC 60081 Ed.5: Double-capped fluorescent lamps - Performance specifications 2013-01-04 34C/1023/FDIS Amendment 2 to IEC 61347-1 Ed.2: Lamp controlgear - Part 1: General and safety requirements 2012-10-05 34C/1027/CD IEC 62756-1 Ed.1: Digital load side transmission lighting control - Part 1: Basic requirements 34D/1064F/CDV IEC 60598-1 ed 8: Luminaires - Part 1: General requirements and tests 2012-11-23 35/1303/FDIS IEC 62281/Ed2: Safety of primary and secondary lithium cells and batteries during transport 35/1303/FDIS IEC 62281/Ed2: Safety of primary and secondary lithium cells and batteries during transport 38/440/DTR IEC/TR 61869-102: Instrument Transformers - Ferroresonance oscillations in substations associated with inductive voltage transformers 40/2177/CD IEC 62813 Ed.1: Lithium ion capacitors for use in electric and electronic equipment - Test methods for electrical characteristics 42/312/CD IEC 61083-3/Ed1: Instruments and software used for measurement in high-voltage and high-current tests - Part 3: Requirements for digital instruments for tests with alternating and direct voltages and currents - "Proposed Horizontal Standard" 2012-11-09 44/676/CD IEC 60204-1 Ed 6: Safety of machinery - Electrical equipment of machines - Part 1: General requirements 45B/740/CDV 46A/1108/CD IEC 62709 Ed.1: Radiation protection instrumentation - Measuring the imaging performance of X-ray systems for security screening of humans IEC 61196-10: Coaxial communication cables- Part 2: Sectional specification for semi-rigid cables with polytetrafluoroethylene (PTFE) dielectric 2013-01-04 Page 2 of 8
46A/1110/CD IEC 61196-10-1: Coaxial communication cables- Part 10-1: Blank detail specification for semi-rigid cables with polytetrafluoroethylene (PTFE) dielectric 46F/216/CDV IEC 61169-1 ed 2.0: RADIO FREQUENCY CONNECTORS - Part 1: Generic specification - General requirements and measuring methods 47E/444/CD IEC 60747-6 Ed. 3: Semiconductor devices - Discrete devices - Part 6 : Thyristors 2012-10-05 47F/126/CD 47F/127/CD 47F/128/CD IEC 62047-15 Ed.1: Semiconductor devices - Micro-electromechanical devices - Part 15: Test method of bonding quality between PDMS and glass IEC 62047-21 Ed.1: Semiconductor devices - Micro-electromechanical devices - Part 21: Test method for Poisson's ratio of thin film MEMS materials IEC 62047-22 Ed.1: Semiconductor devices - Micro-electromechanical devices - Part 22: Electromechanical tensile test method for conductive thin films on flexible substrates 2012-10-05 47F/130/CD IEC 62047-20: Semiconductor devices - Micro-electromechanical devices - Part 20: Gyroscopes 48B/2314/CDV 48B/2316/CD IEC 61076-2-109 Ed 1.0: Connectors for electronic equipment - product requirements - Part 2-109: Circular connectors - Detail specification for connectors with m 12 x 1 screw-locking, for data transmissions with frequencies up to 500 mhz IEC 61076-3-104 Ed 3.0: Connectors for electronic equipment - Product requirements - Part 3-104: Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 2 000 MHz 2013-01-18 2012-11-16 49/1005/FDIS IEC 62276 Ed.2: Single crystal wafers for surface acoustic wave (SAW) device applications - Specifications and measuring methods 2012-10-05 57/1274/FDIS IEC 61850-7-410 Ed.2: Communication networks and systems for power utility automation - Part 7-410: Basic communication structure - Hydroelectric power plants - Communication for monitoring and control 2012-10-05 61/4434/FDIS IEC 60335-2-11-A1 Ed 7.0: Household and similar electrical appliances - Safety - Part 2-11: Particular requirements for tumble dryers 2012-10-05 61/4444/FDIS 61/4445/FDIS IEC 60335-2-27-A1 Ed 3.0: Household and similar electrical appliances - Safety - Part 2-27: Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation IEC 60335-2-102-A2 Ed 1.0: Household and similar electrical appliances - Safety - Part 2-102: Particular requirements for gas, oil and solidfuel burning appliances having electrical connections Page 3 of 8
61/4446/FDIS IEC 60553-2-2-A1 Ed 6.0: Household and similar electrical appliances - Safety - Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances 61/4447/FDIS IEC 60335-2-4-A1 Ed 6.0:Household and similar electrical appliances - Safety - Part 2-4: Particular requirements for spin extractors 61/4448/FDIS IEC 60335-2-9-A1 Ed 6.0: Household and similar electrical appliances - Safety - Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances 61/4449/FDIS IEC 60335-2-14-A2 Ed 5.0: Household and similar electrical appliances - Safety - Part 2-14: Particular requirements for kitchen machines 61/4450/FDIS IEC 60335-2-5 Ed 6.0: Household and similar electrical appliances - Safety - Part 2-5: Particular requirements for dishwashers 61/4451/FDIS IEC 60335-2-15 Ed 6.0: Household and similar electrical appliances - Safety - Part 2-15: Particular requirements for appliances for heating liquids 61/4452/FDIS IEC 60335-2-21 Ed 6.0: Household and similar electrical appliances - Safety - Part 2-21: Particular requirements for storage water heaters 61/4454/FDIS 61/4453A/FDIS IEC 60335-2-35 Ed 5.0: Household and similar electrical appliances - Safety - Part 2-35: Particular requirements for instantaneous water heaters IEC 60335-2-31 Ed 5.0: Household and similar electrical appliances - Safety - Part 2-31: Particular requirements for range hoods and other cooking fume extractors 61J/518/CD IEC 60335-2-69 A1-f1 Ed 4.0: Particular requirements for wet and dry vacuum cleaners, for commercial use 2012-11-09 62A/831/DTR 62D/1037/CD IEC/TR 62348: Assessment of the impact of the most significant changes in Amendment 1 to IEC 60601-1:2005 and mapping of the clauses of the IEC 60601-1:2005 to the previous edition IEC 80601-2-58: Medical electrical equipment - Part 2-58: Particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery 65/509/CD IEC 62708: Document kinds for Electrical and Instrumentation Projects in the Process Industry 65B/843/CD IEC 61285 Ed 3.0: Industrial-process control - Safety of analyser houses 2012-11-23 65B/844/DTS IEC/TS 62692-2 Ed1: Industrial process control devices - Radiation thermometers - Part 2: Determination of the technical data for radiation thermometers 2012-11-23 Page 4 of 8
65B/845/FDIS IEC 61499-1/Ed.2: Function blocks - Part 1: Architecture 65B/846/FDIS IEC 61499-2/Ed.2: Function blocks - Part 2: Software tool requirements 65C/714/CDV IEC 62734/Ed 1: Industrial communication networks - Wireless communication network and communication profiles - ISA 100.11a 2013-01-25 65C/713/CD IEC/TS 62657-1: Industrial Communication Networks - Wireless communication networks - Part 1: Wireless communication requirements and spectrum considerations 65E/271/FDIS IEC 62382 Ed2.0: Electrical and instrumentation loop check 66/487/CDV 69/222/CD IEC 61010-2-101 Ed 2: Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-101: Particular requirements for laboratory equipment for in vitro diagnostic (IVD) medical equipment IEC 61851-21-1/Ed. 1: Electric vehicle conductive charging systems - Part 21-1: Electric vehicle onboard charger EMC requirements for conductive connection to an a.c./d.c. supply 2013-01-04 73/162/CD IEC 60909-0/Ed.2:Short-circuit currents in three.phase a.c. systems - Part 0: Calulataion of currents 2012-11-16 73/163/CD IEC 60865-2/Ed.2: Short-circuit currents - Calculation of effects - Part 2: Examples of calculation 2012-11-16 78/967/CD Amendment 1 to IEC 61243-3: Live working - Voltage detectors - Part 3: Two-pole low-voltage type 2012-11-09 85/421/FDIS IEC 60688: Electrical measuring transducers for converting a.c. electrical quantities to analogue or digital signals 2012-10-05 86/433/DTR IEC 62785/TR/Ed1: Guide to the environmentally conscious design of fibre optics related products and subsystems 86A/1467/FDIS 86A/1468/FDIS IEC 60794-4-20/Ed1: Optical fibre cables - Part 4-20: Aerial optical cables along electrical power lines - Family specification for ADSS (All Dielectric Self Supported) Optical cables IEC 60794-2-31/Ed2: Optical fibre cables - Part 2-31: Indoor cables - Detailed specification for optical fibre ribbon cables for use in premises cabling 2012-10-05 86B/3486/CDV IEC 61300-3-52/Ed1: Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-52: Measurement -Guide hole and alignment pin deformation constant, CD for 8 degree angled PC rectangle ferrule, single mode fibres 2013-01-04 Page 5 of 8
86B/3487/FDIS IEC 61300-2-11/Ed2: Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-11: Tests - Axial compression 86B/3488/FDIS IEC 61300-2-14/Ed3: Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-14: Tests - High optical power 86B/3491/FDIS IEC 61753-143-2/Ed1: Fibre optic interconnecting devices and passive components - Performance standard - Part 143-2: Optical passive VIPA-based dispersion compensator of single-mode fibre transmission for category C- Controlled environments 86B/3492/FDIS IEC 61300-2-19/Ed3: Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-19: Tests - Damp heat (steady state) 86B/3493/FDIS IEC 61753-022-2/Ed2: Fibre optic interconnecting devices and passive components - Performance standard - Part 022-2: Fibre optic connectors terminated on multimode fibre for category C - Controlled environment 86B/3494/FDIS IEC 61300-3-4/Ed3: Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-4: Examinations and measurements - Attenuation 86B/3495/FDIS IEC 61753-021-3/Ed1: Fibre optic interconnecting devices and passive components - Performance standard - Part 021-3: Single-mode fibre optic connectors for category U - Uncontrolled environment 86B/3494/FDIS IEC 61300-3-4/Ed3: Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-4: Examinations and measurements - Attenuation 86B/3495/FDIS 86C/1084/CD IEC 61753-021-3/Ed1: Fibre optic interconnecting devices and passive components - Performance standard - Part 021-3: Single-mode fibre optic connectors for category U - Uncontrolled environment IEC 61280-4-2 Ed. 2.0: Fibre-optic communication subsystem test procedures - Part 4-2: Installed cable plant- Single-mode attenuation and optical return loss measuremento 88/437/CDV IEC 61400-2 Ed.3: Wind turbines - Part 2: Small wind turbines 2013-01-25 88/436/FDIS IEC 61400-11 Ed.3: Wind turbines - Part 11: Acoustic noise measurement techniques 89/1126/CDV IEC 60695-9-2 Ed 1.0: Fire hazard testing - Part 9-2: Surface spread of flame - Summary and relevance of test methods 2013-01-11 90/308/CDV 91/1047/CD Superconductivity - Part 19: Mechanical properties measurement - Room temperature tensile test of reacted Nb3Sn composite superconductors IEC 60068-2-58 Ed.4: Environmental testing - Part 2-58: Tests - Test Td - Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD) 2013-01-18 Page 6 of 8
91/1049/CD 91/1050/FDIS 91/1051/FDIS IEC 62326-15: Printed boards - Part 15: Device Embedded Substrate General electrical test guide for device embedded substrate with active devices, passive components (Capacitor, Resistor, Inductor, etc), Integrated passive device (IPD), and discrete packages IEC 61249-2-27 Ed.1: Materials for printed boards and other Interconnecting structures - Part 2-27 Reinforced base materials clad and unclad - Bismaleimide/triazine modified with non-halogenated epoxide woven glass laminate sheets of defined flammability (vertical burning test), copper-clad IEC 61249-2-30 Ed.1: Materials for printed boards and other interconnecting structures - Part 2-30: Reinforced base materials clad and unclad - Non-halogenated epoxide modified cyanate ester woven glass laminate of defined flammability (vertical burning test), copper-clad 91/1052/FDIS IEC 61249-2-39 Ed.1: Materials for printed boards and other interconnecting structures - Part 2-39: Reinforced base materials clad and unclad - High performance epoxide and non-epoxide, woven E-glass laminate sheets of defined flammability (vertical burning test), copperclad for lead-free assembly 91/1053/FDIS IEC 61249-2-40 Ed.1: Materials for printed boards and other interconnecting structures - Part 2-40: Reinforced base materials, clad and unclad - High performance, non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copperclad for lead-free assembly 100/2024/CD IEC 62753/ Ed. 1: Digital Terrestrial Television Receivers for the DTMB system (TA1) 2012-11-16 100/2031/CD IEC 62634 Ed. 2.0: Radio Data System (RDS) - Receiver products and characteristics - Methods of measurement (TA 1) 2012-11-16 100/2032/CD IEC 62106 Ed. 3: Specification of the Radio Data System (RDS) for VHF/FM sound broadcasting in the frequency range from 87,5 to 108,0 MHz (TA 1) 100/2050/CDV IEC 62379-5-2 Ed.1.0: Common control interface for networked digital audio and video products - Part 5-2: Transmission over networks - Signalling (TA 4) 2012-11-16 100/2051/CDV IEC 61883-8/Ed.1 Amd.1: Consumer audio/video equipment - Digital interface - Part 8: Transmission of ITU-R BT.601 style digital video data (TA 4) 104/582/FDIS IEC 60068-2-78 Ed 2: Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state 105/403/CD IEC 62282-6-400 Ed.1: Fuel cell technologies - Part 6-400: Micro fuel cell power systems - Power and data interchangeability 108/490A/FDIS IEC 62623 Ed 1.0: Desktop and notebook computers - Measurement of energy comsumption 112/218A/CDV IEC 60544-1 Ed.3: Electrical insulating materials - Determination of the effects of ionizing radiation - Part 1: Radiation interaction and dosimetry 2013-01-04 113/154/DTS ISO/TS 80004-6: Nanotechnologies - Vocabulary - Part 6: Nano-object characterisation 2012-11-16 Page 7 of 8
115/59/CD IEC/TR 62681 Ed.1: Electromagnetic environment criterion for high-voltage direct current (HVDC) overhead transmission lines 116/106/CDV IEC 6xxxx-3-1 Ed. 1.0: Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 3-1: Particular requirements for transportable table saws 116/108/CDV IEC 6xxxx-3-6 Ed. 1.0: Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 3-6: Particular requirements for diamond drills with liquid system CIS/I/417/PAS IEC/PAS 62825: Methods of measurement and limits for radiated disturbances from plasma display panel TVs in the frequency range 150 khz to 30 MHz 2013-01-11 2013-01-11 CIS/D/400/CD CISPR 25: Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers CIS/F/583/ISH Interpretation Sheet 1 to CISPR 15: Interpretation sheet on the assessment of retrofit Extra Low Voltage LED lamps CIS/F/584/ISH Interpretation Sheet 2 to CISPR 15: Test conditions for wall dimmers JPC2/34/CD ISO/IEC 13273-1: Energy efficiency and renewable energy sources - Part 1- Energy efficiency JPC2/35/CD ISO/IEC 13273-2: Energy efficiency and renewable energy sources - Part 2- Renewable energy sources Page 8 of 8