HydroPower Washing. Setting the Standard in thorough Cleaning of Plastics: The Friction and Tornado Washers
Robust and Versatile: The economical Solution to convert Plastic Waste into commodities The Friction and Tornado Washer are a perfect combination to clean continuously heavily contaminated film and rigid plastics with water and mechanical forces. Typical contaminations are soil and sludge from agricultural film, paper lables and dust from post industrial film and food residues from all types of post consumer plastics. For a Thorough Cleaning: The Friction and Tornado Washer 2 Pla.to HydroPower Washing.
The Friction Washer FW55-70 The Friction Washer The Friction Washer is designed to dissolve all types of water soluble contaminations like detergents and paper fibres. The rotor inside the machine rotates with a relative slow speed which results in a long residence of the plastic particles in presence of water. To feed directly to the downstream Tornado Washer the Friction Washer can be inclined. Depending on type of contamination the quantity of the cycle water is between 30 and 100 m 3 /h. After purification the cycle water can be used again and again. Pla.to The Friction and Tornado Washers. 3
The Friction Washer disolves paper. Impurities leave the machine together with the water in a separate outlet. Mayor benefits at a Glance The Ease of Maintenance access to rotor and screen for maintenance purposes quick-connect leavers for opening the top lids access to the screen with 5 removable plates on both sides of the machine State of the Art Sealing Technology advanced packed stuffing box system and labyrinth seal for main bearing rotor shaft protected by a hardened steel bush labyrinth sealing ring made of stainless steel anti-rust nickel-coating for console The Robust Screen four replaceable screens in stainless steel screen with huge surface for thorough cleaning various screen holes with diameter of 3, 4, 5, 6 or 10 mm screen cleaning with water jet system The Low-Wear Design heavy drum rotor for an extended durability replaceable beaters made from carbonized steel anti-rust paint finish 4 Pla.to HydroPower Washing.
The Friction Washer in Operation Trouble free Performance long residence time for dissolving paper and food residues in the presence of water water feeding through a large inlet chute for avoiding bridge building Water Supply and Discharge pressure free supply of water together through the inlet chute additional water injection through nozzles directly on the rotor water discharge via a drain at the bottom of the trough Sealing for Leakage Free Operation major parts and access flaps sealed with rubber cut NBR seals Body and Frame with Corrosion Protection trough and lids in 2-K paint finish solid hot galvanized frame An integrated Solution For completing the washing line it is recommended to integrate a wet granulator on top of the Friction Washer. Please ask for more information. The Friction and Tornado Washer require a small footprint. Pla.to The Friction and Tornado Washers. 5
The Tornado Washer MW110-130 One Step Cleaner: The Tornado Washer The Tornado Washer cleans the prewashed plastics by spinning off residual contaminations from the surface of the flakes. By the high speed of rotor the plastic is simultaneously dewatered. No additional water is added to the Washer. Components of the machines that are susceptible to corrosion are manufactured from stainless steel (quality 1.4301 or 304 SS) e.g. screen baskets and screen fixing rings. 6 Pla.to HydroPower Washing.
The Tornado Washer MW110-130 The Heavy Rotor Design high speed rotor for best cleaning performance extra huge rotor diameter approx. 1300 mm 54 rotor beaters made from carbonized steel for a long lifetime The Automation of Cleaning and Discharging automatic screen cleaning by two rotating rubber scrapers sludge, water and contaminants are forced discharged via an auger out of the washer The Efficiency and Reliability water tightness by rubber cut NBR seals machine based on hot galvanized heavy frame central lubrication system with hand pump for homogeneous feeding of grease to the slewing ring five large inspection plates fitted along the body of the machine giving access to both sides Meeting your Requirements for a Comprehensive Solution For downstream drying of the plastics Pla.to offers efficient individual designed Thermal Dryers. Please ask for more information. Pla.to The Friction and Tornado Washers. 7
Performance Table Friction Washer Tornado Washer Type FW37-60 FW55-70 MW75-90 MW110-130 film [kg/h] thickness > 15 60 µm rigid plastics [kg/h] thickness > 0,5 mm rated power main motor [kw] 500 700 700 1200 500 700 700-1200 2000-2500 3000 4000 2000 2500 3000 4000 37 55 75 110 Discover the Benefits Pla.to GmbH Nickrischer Straße 20 02827 Görlitz Germany Phone: +49 35822 312735 Fax: +49 3222 2454132 E-Mail: info@plato-technology.de Friktions-/Intensivwäscher/02-2013/EN www.plato-technology.de