SPECIFICATIONS Model CFX2-RGB Beam Angle 120 Input Voltage 24V DC Wattage 3.9W/ft Lamp Life 50,000 hours Dimensions 5/16 W x 1/8 H LEDs (per ft) 18 Operating Temperature 4 F to 122 F Max Run 20 ft. Min Run ~4 Environment Indoor - Dry Certifications Warranty 5 Years see published warranty terms for detailed information. Exceeding the operating temperature values may damage the LEDs by reducing the lifespan, lumen output, and/or adversely impact color consistency. Improper thermal management may lead to premature product failure and void the warranty. LUMEN DATA DESCRIPTION COLOR WATTS /FT LUMENS /FT EFFICACY (lm/w) WAVELENGTH (nm) RED 1.3 38 30 620 GREEN 1.3 90 70 530 BLUE 1.3 20 16 460 WHITE 3.9 148 38 / CFX2 is a contractor-grade, value engineered, LED RGB Flexible Tape lighting system sold in 20 foot reels. 20 foot reels of CFX2-RGB are preinstalled with a power connector on each end providing two working ends readily connectable to a driver if the tape is cut. Field cuttable for shorter runs. Made of highly flexible material that can be applied to most clean, dust-free surfaces using pre-installed 3M double sided tape. Choices in drivers and simple or DMX controllers. Can be used for various applications such as cove, soffit, accent, path, contour, edge, display, back lighting, under-shelf and undercabinet lighting. FEATURES Low power consumption, low heat output No UV/IR radiation, no mercury Even, 120 degree light distribution Mounts with 3M hi-bond adhesive Low profile and flexible (for bends 90 degrees or tighter do so at the cutting mark) Straight line installations can be achieved by using an aluminum mounting channel with clear or diffused lens CFX2 uses a 24V power supplies Color changing Specifications subject to change without notice. Page 1 of 5
ORDERING INFORMATION SERIES LENGTH CFX2-RGB - 20FT 20FT 20ft Sold in 20ft (i.e. CFX2-RGB-20FT) reels Example: CFX2-RGB WIRING DIAGRAMS For reference purposes only. Not for installation. Not to scale. PLUG & PLAY DESCRIPTION A. Power Supply DL-PS-XX/24 B. Controller & interface LC-IR-300 C. LED strip CFX2-RGB W1. Wire Included with power supply W2. Power Connector CFX-RGB-PC Specifications subject to change without notice. Page 2 of 5
OPTIONAL ACCESSORIES CFX-RGB-PC 8 Plug and Play Power Connector. Can only be connected to ends cut along the cutting mark. CFX-RGB-PC-HW 7 Hard Wire Power Connector. Can only be connected to ends cut along the cutting mark. CFX-RGB-4WR-CONN 2-Wire Direct Connector. Connects cut ends where indicated by a cutting mark. CFX-RGB-CC6 6 Connecting Cable. Connects cut ends where indicated by a cutting mark. CFX-RGB-CC12 12 Connecting Cable. Connects cut ends where indicated by a cutting mark. POWER SUPPLIES DL-PS-WP24/24 24W, Wall Plug, Plug & Play, LPS, UL listed 5 DL-PS-24/24 24W, Desktop, Plug & Play, LPS, UL listed 5 DL-PS-48/24 48W, Desktop, Plug & Play, LPS, UL listed 11 DL-PS-60/24 60W, Desktop, Plug & Play, LPS, UL listed 14 DL-PS-100/24 90W, Desktop, Plug & Play, LPS, UL listed 20 DL-PS-100/24-CL2 96W, Desktop, Plug & Play, Class 2, UL listed 22 * DL-PS-20/24-JBA 20W, Hard Wire in Junction Box, Class 2, UL Listed 4 DL-PS-60/24-JBA 60W, Hard Wire in Junction Box, Class 2, UL Listed 14 DL-PS-96/24-JBA 96W, Hard Wire in Junction Box, Class 2, UL Listed 22 * DL PS 12/24 HW 12W, Hard Wire, Class 2, UL Listed 2 DL PS 20/24 HWA 20W, Hard Wire, Class 2, UL Listed 4 DL PS 35/24 HWA 35W, Hard Wire, Class 2, UL Listed 8 DL PS 60/24 HWA 60W, Hard Wire, Class 2, UL Listed 14 DL PS 96/24 HWA 96W, Hard Wire, Class 2, UL Listed 22 * * Max run of 20 ft. Multiple or split runs may be powered a single, higher power driver. DL-PS-2Y or 3Y split power feeds necessary. OPTIONAL CONTROLLERS LC-IR-300 Infrared RGB Handheld Controller. Need to point in the general direction of receiver to function properly. LC-RF-300 Radio Frequency RGB Handheld Controller. Can be used in remote location without line of sight. NOTE: Contact factory for advanced control options. Specifications subject to change without notice. Page 3 of 5
OPTIONAL MOUNTING CHANNELS SMALL DEPTH PROFILE BASIC CFX2-RGB Mounting Channels Surface Mounting A A A A 45 Mounting Recessed For Miter Grooves B C B C Adjustable Mounting Flangeless Flanged CH-SM31 CH-SM-32 CH-SM-33 CH-SM-34 CH-SM-35 Lens Included Lensless Focusing Lens Small Profile Depth Diffused Light Aluminum Anodized DL-FLEX-CH6-B Specifications subject to change without notice. Page 4 of 5
SUGGESTED MOUNTING TECHNIQUES A. Surface Mounting with Bracket. B. Recessed Mounting into Mitered Groove with Bracket. C. Recessed Mounting into a Mitered Groove using a flanged Channel. Specifications subject to change without notice. Page 5 of 5