Fire control panels FC726 FC726-XA Modular, pre-confectioned, microprocessor-controlled fire control panel for up to max. 1512 device addresses Integrated, user-friendly operating unit Detection and automatic reading in (auto-configuration) of all C-NET devices, ready for operation immediately Can be extended with additional line cards and I/O cards Fast Ethernet interface for a heterogeneous network In-built power supply with uninterrupted changeover to battery operation Suitable for standalone operation or networking Up to 64 stations can be connected in a network Integrated degraded mode function Redundant networking with degraded mode operation in accordance with EN 54 Various extension options 2016-05-03 Control Products and Systems
Properties Station layout Operating unit The operating unit was designed in accordance with Australian standards and contains the following components: CPU module and electronic components for operating unit Ethernet connection Slots for RS232 and RS485 modules and network modules (SAFEDLINK) Space for key switch (AU) Space for event printer (only in housings (Comfort) and (Large)) Periphery board with four integrated C-NET detector lines Two relay outputs for alarm and fault Four monitored outputs for alarm, fault, and horn Twelve configurable 24 V inputs / outputs Two slots for loop extension (C-NET) Card cage with slots for serial interfaces and max. 5 extra cards Line card (FDnet / C-NET) FCL2001-A1 (for additional lines) Line card (interactive), FCL2006-A1 Line card (interactive, Ex), FCL2007-A1 Line card (SynoLOOP), FCL7201-Z3 I/O card FCI2008-A1 (with 12 configurable inputs / outputs) I/O card (horn / monitored), FCI2009-A1 I/O card (RT) FCI2007-A1 Power supply (150 W), emergency power supply The power supply feeds the hardware and charges the batteries. In the event of a power cut, the batteries provide emergency current for a bridging time of up to 72 hours. Housing The housing provides space for additional fixtures on the U-rails and next to the periphery board. Extension Floor repeater displays, operating units, and alarm devices on the C-NET detector line Connection to the Siemens danger management system C-NET detector lines All C-NET detector lines are monitored for ground faults. Processes signals of the Cerberus PRO FD720 detector series 2
Functions Up to 2000 events can be called up for each station according to various criteria. The fire control panel can be configured with the Cerberus-Engineering-Tool FXS7212. Configuration of complex applications and controls Adaptation of customer texts on the terminal itself or using the Cerberus-Engineering- Tool Automatic summer / winter time changeover Stored data can be uploaded via remote access The firmware for all processor-controlled control panel components can be downloaded The control panel can be operated via an additional, separate fire terminal FT724. Processes signals from various devices such as: FD720 devices from the Cerberus PRO series, SynoLOOP, and interactive devices Mixed use of all line cards and I/O cards possible In the event of a defect, the line cards can be replaced without the control panel having to be powered down. 3
System overview Extensions for card cages FCL2001-A1, line card (FDnet / C-NET) 4 loops with max. 252 addresses FCL7201-Z3, line card (SynoLOOP) 4 loops of max. 128 devices FCL2006-A1, line card (interactive) 1 loop of max. 128 devices FCL2007-A1, line card (interactive, Ex) 1 stub of max. 32 devices FCI2008-A1, I/O card (configurable) 12 freely configurable inputs / outputs per I/O card 2 24-V supply outputs FCI2009-A1, I/O card (horn / monitored) 8 monitored horn outputs FCI2007-A1, I/O card (remote transmission) Relay outputs for alarm and fault 1 24-V voltage output 1 monitored fault output 2 configurable outputs 2 GPIO outputs (general purpose input / output) Mixed use possible 4
Networking of several fire control panels Up to 32 control panels and terminals can be connected to form a single cluster (C-WEB / SAFEDLINK network) or up to 16 stations if the cluster is connected to the Siemens danger management system. 5
Extended networking By using a fiber optic backbone (C-WEB / LAN), up to 14 clusters with up to 16 stations can be operated via the Ethernet switch (modular) in a homogeneous network (a maximum total of 64 stations). You will find more information about system networking in system description A6V10210355. You will find more information about fire control panel FC726-ZA in data sheet A6V10263277. Use Application ranges Fire control panel FC726 is intended for medium-sized, complex applications such as: Hotels Schools Office complexes Due to the various networking options, the FC726 can also be used for large sites. 6
Fire control panel FC726-XA (modular) Housing (Large) Operating unit (AU) Periphery board with four integrated C-NET detector lines Integrated power supply (150 W) Max. battery capacity 45 Ah With card cage (5 slots) Can be extended with the following cards: Line card (FDnet / C-NET) Line card (SynoLOOP) Line card (interactive) Line card (interactive Ex) I/O card Operating add-on FCM7213-Y3 (2 LED) 48 indicator zones with one red / green and one yellow LED each For retrofitting Operating add-on FCM7214-Y3 (4 LED) 96 indicator zones with one red / green and one yellow LED each For retrofitting Event printer FTO2001-A1 Printer for installation in all control panels RS232 module must be ordered separately For operating add-on (empty) and operating add-on (2 LED) only Matrix printer DL3750+ (external) RS232 interface RS232 module must be ordered separately 7
Operating unit FCM7222-X3 (AU) 1 Alarm indicator lights up red when an alarm event occurs 2 Backlit display (LC display with 8 lines of 40 characters) with detailed information on all events that occur Event type, event location, action texts, operating conditions, etc. Behavior instruction shown directly in alarm situations Convenient operation via softkeys and navigation button 3 Softkeys for direct, condition-dependent operation 1) 4 Navigation button 1) 5 Menu button 6 Keypad for entering numeric and alphanumeric texts, e.g., password, customer text, etc. 7 LED indicators 8 Key switch (optional) for operating access (AU) 9 Button for switching off alarm messages 10 Two operating buttons with LEDs for acknowledging events and changing the operation mode 11 Buttons for 'Silence buzzer', 'Silence alarm', and 'Reset' 12 Freely configurable button fields 13 Button for scrolling through alarm messages 14 One configurable LED and four standard LEDs 15 'System fault' LED and 'Power' LED 1) In 'Fire Brigade' mode (access level 2.1), the softkeys (3) and the navigation button (4) have no function. A password is required for access level 2.1. 8
Design Possible layout of the FC726-XA Basic equipment Designation Notes 1 Rear panel (large) FHA2005-A1 2 Periphery board (4 loops) FCI2004-A1 3 Power supply (150 W) V24230-Z6-A5 4 Mains terminals on U-rail TS35 Space for socket, relay modules, etc. 5 Operating unit FCM7222-X3 System operation and CPU 6 Card cage (5 slots) FCA2008-A1 For line cards and I/O cards 7 Space for batteries 2x 12 V / 17 45 Ah Fire Safety 9 2016-05-03
Extensions Designation Notes 8 Relay module Z3B171 Relay for fire controls 9 Key switch (AU) FTO7201-X3 For operating access authorization 10 Loop extension (C-NET) FCI2003-A1 For doubling the integrated loops, the number of addresses remains the same 11 Max. 5 module bus cards Line card (FDnet / C-NET) FCL2001-A1 For additional C-NET detector lines, 4 loops with 252 addresses Line card (SynoLOOP) FCL7201-Z3 For additional SynoLOOP lines, 4 loops, max. 128 addresses per loop Line card (interactive) FCL2006-A1 For one addressed detector line (interactive) Line card (interactive, Ex) FCL2007-A1 For one stub with line devices (interactive) I/O card (configurable) FCI2008-A1 12 configurable inputs / outputs 2 supply outputs I/O card (horn/monitored) FCI2009-A1 8 horn outputs, monitored I/O card (RT) FCI2007-A1 2 relay outputs 2 configurable outputs 1 GPIO 1 fault output, monitored 1 DC 24 V output 12 RS485 module (isolated) FCA2002-A1 For peripheral devices with RS485 interface 13 RS232 module (isolated) FCA2001-A1 For peripheral devices with RS232 interface 14 Network module (SAFEDLINK) FN2001-A1 For networking several stations 15 Repeater (SAFEDLINK) FN2002-A1 For extending the SAFEDLINK connection 16 Sounder module FCA2005-A1 For splitting 1 sounder into 4 sounders 17 Batteries (12 V, 17...45 Ah, VDS) For emergency power supply, dependent on load and bridging time 18 Operating add-on (2x LED indicators) FCM7213-Y3 Instead of operating add-on (empty) Operating add-on (4x LED indicators) FCM7214-Y3 Instead of operating add-on (empty) 19 Event printer FTO2001-A1 For logging events 20 19" mounting kit FHA2016-A1 For installation in 19" third-party housing 21 License key Sx FCA20xx For software extension 22 Cable kit (communication) FCA2014-A1 For flexible cable connections to the modules on the operating unit 23 Power supply kit (150 W, B) FP2005-A1 For extra power supply 24 Relay module Z3B171 Space for U-rail TS35, 70 mm long (provided by customer) for max. 4 relay modules 10
Type Overview Type Order no. Designation Weight FC726-XA S54400-C166-A2 Fire control panel (modular) 20.900 kg Extensions Z3B171 BPZ:4843830001 Relay module AC 250 V / 10 A (1 relay) 0.042 kg FTO7201-X3 S54400-N177-A1 Key switch (AU) 0.050 kg FCI2003-A1 A5Q00010136 Loop extension (C-NET) 0.064 kg FCL2001-A1 A5Q00009875 Line card (FDnet / C-NET) 0.120 kg FCL7201-Z3 S54400-A116-A1 Line card (SynoLOOP) 0.120 kg FCL2006-A1 S54400-A108-A1 Line card (interactive) 0.120 FCL2007-A1 S54400-A134-A1 Line card (interactive Ex) 0.120 FCI2008-A1 S54400-A6-A1 I/O card (configurable) 0.120 kg FCI2007-A1 S54400-A20-A1 I/O card (RT) 0.210 kg FCI2009-A1 S5440-A21-A1 I/O card (horn/monitored) 0.200 kg FCA2002-A1 A5Q00009923 RS485 module (isolated) 0.067 kg FCA2001-A1 A5Q00005327 RS232 module (isolated) 0.068 kg FN2001-A1 A5Q00012851 Network module (SAFEDLINK) 0.077 kg FN2002-A1 S24236-B2502-A1 Repeater (SAFEDLINK) 0.154 kg FCA2005-A1 A5Q00014866 Sounder module 0.140 kg FCA2014-A1 A5Q00023027 Cable kit (communication) 0.224 kg FCM7213-Y3 S54400-B149-A1 Operating add-on (2x LED indicators) 2.600 kg FCM7214-Y3 S54400-B150-A1 Operating add-on (4x LED indicators) 2.800 kg FHA2016-A1 A5Q00020179 19" mounting kit 3.000 kg FN2006-A1 S54400-A109-A1 Fiber optic cable network module (SM) 0.770 kg FN2007-A1 S54400-A110-A2 Fiber optic cable network module (MM) 0.770 kg Auxiliary power supply FP2005-A1 A5Q00018779 Power supply kit (150 W, B) for cascading 1.100 kg Extended networking (backbones) FN2012-A1 S54400-B152-A1 Ethernet switch (modular) 0.580 kg FHA2029-A1 S54400-B79-A1 Mounting kit for Ethernet switch (Comfort) 0.500 kg FHA2030-A1 S54400-B81-A1 Mounting kit for Ethernet switch (Large) 0.500 kg Batteries FA2005-A1 A5Q00019677 Battery (12 V, 17 Ah, VDS) 5.640 kg BAT12-25 S54302-Z102-A1 Battery (12 V, 25 Ah, VDS) 7.572 kg FA2007-A1 A5Q00022897 Battery (12 V, 45 Ah, VDS) 15.320 kg License keys FCA2033-A1 S54400-P154-A1 License key (S1) 0.010 kg FCA2034-A1 S54400-P155-A1 License key (S2) 0.010 kg FCA2035-A1 S54400-P156-A1 License key (S3) 0.010 kg 11
Type Order no. Designation Weight External printer DL3750+ A5Q00023962 Matrix printer (external) 7.300 kg Spare part A5Q00023963 Color ribbon for matrix printer DL3750+ 0.078 kg 12
Technical data Mains voltage Power supply Operating voltage (modulated) Operating current (quiescent) Battery capacity Battery monitoring / mains monitoring Connectable detector series FC726-XA AC 98 127 V / AC 196 253 V 150 W DC 21 28.6 V Max. 5 A 2x 12 V, 45 Ah Yes / yes Cerberus PRO FD720 (C-NET) Number of C-NET addresses Max. 1512 Number of lines Loops with loop extensions Stub lines 4 / 8 8 / 16 C-NET (4 per line card) Max. 20 Integrated inputs / outputs Relay output RT alarm / FT fault Monitored outputs Alarm / fault / horn Freely configurable inputs/outputs Freely configurable inputs / outputs with max. 5 extra I/O cards Operating unit 1 / 1 1 / 1 / 2 12 60 (12 per card) Integrated Slots for RS232, RS485 serial ports 2 Slots for network modules 2 Slots for loop extension 2 Slots for extra line cards or I/O cards (on integrated card cage) Max. 5 Mounting spaces for cable kit (communication) 2 Sounder module Max. 2 Ethernet port RJ45 1 Operating temperature -8...+42 C Storage temperature -20...+60 C Air humidity (no condensation permitted) Dimensions (W x H x D) Without cover cap With cover cap Color Housing Cover cap Protection category (IEC 60529) 95 % rel. 430 x 796 x 265 mm 430 x 796 x 288 mm ~RAL 7035 light grey ~RAL design 000 50 00 grey IP30 13
Product documentation Document ID A6V10225323 A6V10229261 A6V10210355 A6V10210368 A6V10210362 A6V10210390 A6V10210424 A6V10211076 A6V10263277 Title Equipment overview Cerberus PRO Detector system FD720 List of compatibility (for 'Cerberus PRO' product line) FS720 Fire detection system - System Description FS720 Fire detection system - Product Data FS720 Fire detection system - Planning FS720 Fire detection system - Mounting / Installation FS720 Fire detection system - Configuration Operation Manual Fire control panel / Fire terminal FC72x / FT724 Data Sheet Fire control panel FC726 Issued by Siemens Switzerland Ltd Division International Headquarters Gubelstrasse 22 CH-6301 Zug Tel. +41 41-724 24 24 www.siemens.com/buildingtechnologies Siemens Switzerland Ltd, 2016 Technical specifications and availability subject to change without notice. 14 Document ID Edition 2016-05-03