DWF Series DECORATIVE WATER FEATURES IP68 www.afo.es
DWF400 BASES The new DWF400 fixture base is a solid cast from a mixture of polymers and silica sand that houses connectors or LED light sources and electronics depending on model. The molding technology ensures protection from water ingress through seepage or capillarity to IP68. Each base is delivered with 200mm of neoprene-clad (8mmØ 2x1mm Cu) cable and a pair of IP68 connectors, one of which is already installed on the fixture s cable. Bases can be active (AB) or passive (PB). Active bases (AB) are fiber optics illuminators. They house a 1,3W CREE LED and its driver to power fiber optics reeds and fixtures. Active bases must be connected to a 12VAC power supply. Passive bases (PB) house a female connector on top from where to power LED reeds and other LED fixtures. Passive bases must be connected to a 12VAC power supply. Active bases (AB) Active DWF40X base with a 1,3W CREE LED for radial installation with optical port for reeds and other fiber optics fixtures. Active DWF41X base with a 1,3W CREE LED for in-line installation with optical port for reeds and other fiber optics fixtures. DWF400 Radial DWF410 In-line Installation White 6000º K White 3000º K Blue Green Red Amber Radial DWF401 DWF402 DWF403 DWF404 DWF405 DWF406 In-line DWF411 DWF412 DWF413 DWF414 DWF415 DWF416 Passive bases (PB) Passive DWF421 base for radial installation with female connector for LED reeds and other 12VAC fixtures. Passive DWF431 base for in-line installation with female connector for LED reeds and other 12VAC fixtures. DWF421 Radial DWF431 In-line
TECHNICAL DATA IP68 Connectors Active bases (AB) Housing: Cast polymer Light source: Cree LED XR-E 1,3W Driver: Encapsulated IC 350mA Operating voltage: 12VAC (magnetic transformers only) Power load: 2W Power cord: 2 x 1mm H07RN-F neoprene clad Cable length: 0,2m Connector on cable: DWF40X (1) DWF41X (2) Connector on base: - Extra connector: DWF40X (1) DWF41X (2) Ingress protection grade: IP68 Weight: 1,2Kg Packing: 190x135x100mm 80 120 Passive bases (PB) Housing: Cast polymer Light source: - Driver: - Operating voltage: 12VAC (magnetic transformers only) Power load: - Power cord: 2 x 1mm H07RN-F neoprene clad Cable length: 0,2m Connector on cable: DWF421 (1) DWF431 (2) Connector on base: 1 Extra connector: DWF421 (1) DWF431 (2) Ingress protection grade: IP68 Weight: 1,2Kg Packing: 190x135x100mm 75 120
INSTALLATION Radial installation 12VAC TOTAL CABLE LENGTH: 20m. MAX. 220/240VAC In-line installation 12VAC 20 BASES MAX. IN EACH CIRCUIT TOTAL CABLE LENGTH: 20m. MAX. 220/240VAC
DECORATIVE WATER FEATURES Decorative Water Features are decorative lighting effects for gardens, lakes, ponds, mirrors, shallow pools, and other damp, wet, or water environments. The range comprises fiber optics and LED fixtures with different shapes and possibilities; reeds with lengths of up to four meters, luminous bushes, plants, and fronds. The fixtures are firmly secured in water or soil by means of IP68 bases, which deliver power to features with LED lamps, or light to fiber optics elements. Each Decorative Water Feature consists of two products: 1) A luminous element: reed, bush, frond, or palms. 2) An anchoring base housing a matching connector for reeds with an LED tip (Passive Base PB) or an LED illuminator to light fiber optics features (Active Base AB). The bases must be connected to a 12VAC magnetic transformer by means of the paired connectors supplied with each unit. This arrangement allows multiple fixtures to be easily wired in parallel. The Water Features low voltage allows their installation in damp areas, soil, or underwater with total safety. CARBON COMPOSITE REEDS Manufactured with hi-tech carbon fiber tubes, these fixtures afford unparalleled flexibility and long-lasting features. The thinner (4mm) reeds sway in the slightest breeze and resemble fireflies when set in groups. Thicker reeds (8mm) sit straight in all conditions. Each reed incorporates a replaceable G4 almond LED lamp and plug directly its connector into a matching one in the AFO PB, IP68 base. Tube Ø LED Color / Length 1 meter 2 meter 3 meter 4 meter 4mm White 6000º K DWF561 DWF562 DWF563 DWF564 4mm White 3000º K DWF571 DWF572 DWF573 DWF574 8mm White 6000º K DWF581 DWF582 DWF583 DWF584 8mm White 3000º K DWF591 DWF592 DWF593 DWF594 0,5 to 4m
FIBER OPTICS REEDS Slender 10mm clear PMMA tubes house thin fiber optics in different configurations to light the reed s full length. The tubes can be clear for a sparkling effect or frosted for a more subdued and even brightness. These reeds are powered by an LED illuminator housed in its AFO AB, IP68 base. Finish / Length 0,5 meter 1 meter 1,5 meter 2 meter Clear DWF501 DWF502 DWF503 DWF504 Frosted DWF511 DWF512 DWF513 DWF514 0,5 to 2m FIBER OPTICS BUSHES Bush fixtures consist of conformable sidelight guides, which can be formed by hand to adopt and maintain any shape. The designer can shape the individual fibers to intertwine bramble-like, trail like a creeper, or fan out to spread over a large area. Each of the eight light guides houses several Toray Ultra optical fibers and a light-alloy wire, in a clear PVC sleeve protected by a PMMA clear end cap for ingress protection. These fixtures are powered by an LED illuminator housed in its AFO AB, IP68 base. Finish / Length 0,5 meter 1 meter 1,5 meter 2 meter Clear DWF521 DWF522 DWF523 DWF524 0,5 to 2m
FIBER OPTICS FRONDS Frond fixtures are formed by seven (regular) or nine (irregular) 4mm ABS polymer reeds, each housing a 1,5mm Toray Ultra optical fiber, but curved so the bright light on the reed tips face downward to draw a circle of points on the water surface. The curved reeds are protected by a PMMA clear cap for unimpeded view and ingress protection. These fixtures are powered by an LED illuminator housed in its AFO AB, IP68 base. Type / Length 0,5 meter 1 meter 1,5 meter 2 meter Regular DWF531 DWF532 DWF533 DWF534 Irregular DWF541 DWF542 DWF543 DWF544 0,5 to 2m FIBER OPTICS PALMS Palm fixtures are formed by nine 4mm ABS polymer reeds, each of which houses a 1,5mm Toray Ultra optical fiber, these fixtures fan out like aquatic fronds and gently move with the wind. The bright light points on the reed tips are protected by a PMMA clear cap for unimpeded view and ingress protection. These reeds are powered by an LED illuminator housed in its AFO AB, IP68 base. Finish / Length 0,5 meter 1 meter 1,5 meter 2 meter Black DWF551 DWF552 DWF553 DWF554 0,5 to 2m
Images in this leaflet are copyright of Advanced Fiber Optics, S.L., its clients, or distributors, and cannot be used in any way without authorization of the copyright holder. Layout & Digital Art: L. M. Cano 2016. MKT170 rev. 1 All AFO products are original and exclusive designs made or assembled in Europe. Advanced Fiber Optics, S.L. Escornalbou, 1 08041 Barcelona Spain Tel.+34 93 455 72 00 - info@afo.es www.afo.es