INSTALLATION INSTRUCTIONS

Similar documents
PAL-380 Precision Architectural Loudspeakers

PAL-80, PAL-65, PAL-45 Precision Architectural Loudspeakers

Instruction Manual ICTS-6 HT. In-Ceiling Theater System Speaker - 3 T W E E T E

DC265 / DC365 INSTALLATION & OWNERS' MANUAL

ORIGINAL SERIES LARGE RECTANGLE SPEAKERS

In-Wall Loudspeakers C 280, C 265, and C 260. Ceiling Loudspeakers C 85, C 70, and C 65

AO-520 & AO-620. OUTDOOR SPEAKERS I n s t a l l a t i o n & O p e r a t i o n M a n u a l

PAL-265 Precision Architectural Loudspeakers

PAL-245 Precision Architectural Loudspeakers

Bravo II. High Performance Multi-Purpose Speaker

IWTS Series IWTS-5 LCR & IWTS-10 LCR In-Wall Theater System Speakers. Instruction Manual

Acclaim 5 Series OutBack Outdoor Loudspeaker Installation Manual

SI-744 IN-WALL SURROUND SPEAKER. O w n e r s M a n u a l

IN-CEILING SPEAKERS. I n s t a l l a t i o n a n d I n s t r u c t i o n M a n u a l

CTx Series pictured here with the S Series S-8 Powered Subwoofer. CTx Series Compact Speakers. O w n e r s M a n u a l

MODEL inch, 3-way studio monitor

Custom Series In-Wall and In-Ceiling Loudspeakers

MC-553 LCR IN-WALL SPEAKER. O w n e r s M a n u a l

EW25 EW30 EW35 USER & INSTALLATION MANUAL. Model. Model. Model

MiniCube. When Used In Theaters. Performance. Dimensions. When Used For Distributed Audio. Predictive Placement. 6" wide. 8-1/2" deep.

MC SERIES. O w n e r s M a n u a l

VVR1, VR2, VR3 V VRB, VRC High Performance Home Theater Loudspeakers

Aria Polypropylene In-wall & In-ceiling Speakers. P/Ns 18586, 18587, 18588, 18589, User's Manual

On-Wall Loudspeakers OWNER S MANUAL. Now Hear This 527 Stone Road Benicia, CA NHT-9993

SOUNDPOINT SERIES SP5II, SP6II, SP6CII, SP6CSII, SP8II, SP8CII OWNER S GUIDE

HOME CINEMA IN-WALL SPEAKER

MS SERIES MS 401 MS 601 MS 801 MS 401W MS 601W MS 801W. All-Weather Loudspeaker System. User Manual

Installation Guide Atmospherix and Atmospherix A20

pg.2 Support:

Amber In-wall & In-ceiling Speakers. P/Ns 24431, 24432, 24433, 24434, User's Manual

NS-IW360C HOME CINEMA IN-CEILING SPEAKER OWNER S MANUAL CONTENTS

C363, C363DT, C563, C763, C563DT, C383, C583, C783 In-Ceiling Architectural Loudspeaker Instruction Manual

B E RY L L I U M C O N E S PE A K E R S 41-SE/B. Model BERYLLIUM CONE SPEAKERS

HEAR IT, DON T SEE IT!

CM610 6" CEILING MOUNT LOUDSPEAKER

A Completely New Installer Series by MartinLogan

Owner s Manual Epix - Back Box

Owner s Manual OH-S7 OH-T7

W363, W563, W763, W553L, W383, W583, W783, W873, W893 In-Wall Architectural Loudspeaker Instruction Manual

Power for the Digital Revolution. HKS 4 LOUDSPEAKERS OWNER S MANUAL

Thank you for choosing the Totem Acoustic Kin Architectural series.

JBL SYNTHESIS FOUR S4S FLUSH-MOUNT LOUDSPEAKER OWNER S GUIDE. Two units minimum

CONGRATULATIONS! TABLE OF CONTENTS. Introduction. Features and Benefits. Parts Guide 4. Installation Considerations 4. Installing the Loudspeaker 6

LS205EB INSTALLATION/OWNERS MANUAL

EVID FM-Series Loudspeaker User Manual

A NEW WAVE OF IN-CEILING SPEAKERS

M&S 8-Ohm Stereo Speaker Systems

CP-CT260 CP-WT150 CP-WT260 CP-CT150

VM-WA525-S / VM-WA65-S VM-WA8-S SHAKER SERIES 2-WAY HIGH PERFORMANCE IN-WALL SPEAKER

VISUAL PERFORMANCE SERIES VP10SUB NC VP10SUB NC ENCLOSURE DSP AMPLIFIER VP12SUB NC VP12SUB NC ENCLOSURE DSP AMPLIFIER

PPI PPI PPI SERVICE PPI PPI PPI PPI PPI PPI CAUTION! PPI

TK SERIES FREESTANDING SPEAKERS. I n s t a l l a t i o n & O p e r a t i o n M a n u a l

MANUAL CMSQ108

Installation Instructions Component Systems Professional Line

INSTALLATION MANUAL ES-TERRAIN-SYS-4.1 ES-TERRAIN-SAT-2.0 ES-TERRAIN-SUB ES-TERRAIN-SAT-2.0 ES-TERRAIN-SYS-4.1 ES-TERRAIN-SUB

SPEAKERS OWNER S GUIDE C205 C336 CC225

IWCB-727 THX Select In Wall Closed Box Speaker. Instruction Manual

EPISODE SPEAKERS. Episode speakers were created to be the. best in its class, and were designed from the. ground up with both the custom integrator

Alpha In-Wall Speaker 10-Inch Carbon Fiber 300W Subwoofer

SPECIFICATIONS OWNER S GUIDE. SoundPoint SP5, SP6, SP6C, SP8. Series SP5 SP6 SP6C SP8 PRO SOUND COMES HOME

MASK2. Instruction manual

OWNER S MANUAL MUSICA SERIES DISTRIBUTED AUDIO CUSTOM SPEAKERS MTX.COM

WaterVue Bluetooth Bathroom Music System

Introduction. Positioning

Speakers. A speaker for every space, project and price point.

RSA-835 RSF-610 RSF-620 RSF-635 RSF-610T RSF-820 RSA-635. AcclaimTM Speakers. With Magnetic Edgeless Grilles. Installation Manual

HT300 HT400LCR. owner's manual. analog and digital systems

Discover yours. CONGRATULATIONS OUR VISION

JBL Studio 1 series loudspeakers

D80 Series. Director Collection. Installation Manual D89, D87, D85, D83DT/SUR, D83, D83A, D81

1. Flat On-Axis Frequency Response with Wide Bandwidth Because we ve sweated the details, you ll swear the performance is happening in front of you!

AAS SERIES. AAS6, AAS8, AAS55, AAS6C and AAS6CS OWNER S GUIDE

SONANCE ORIGINAL SERIES MEDIUM ROUND SPEAKERS

CONGRATULATIONS! TABLE OF CONTENTS. Introduction. Features and Benefits. Parts Guide 4. Installation Considerations 4. Installing the Loudspeakers 6

F300 SERIES FREESTANDING SPEAKERS

ARENA 6IC, ARENA 8IC, ARENA 6ICDT In-Ceiling Architectural Loudspeaker Instruction Manual

STUDIO SERIES L226W, L226C, L228C, LS326W, LS326C, LS328C OWNER S GUIDE

Schönberg. Features. To provide maximum bass capacity with absolute authority, SCHÖNBERG features two bass-reflex ports of different lengths.

The Architectural Loudspeaker: Preference

95.44 (Front) (Center) (Sat) (On-Wall) Owners Manual

OS7.5 OS6.5 OS5.5 I N D O O R / O U T D O O R W E A T H E R P R O O F L O U D S P E A K E R S

2-Way Center Channel

A twig cracks in the background as the

INSTRUCTION MANUAL SONANCE VIRTUOSO D-SERIES INTRODUCTION SAFETY WARNING: PARTS LIST

Instruction Manual. Atlantic Technology. System T70 High Performance Ultra-Compact Home Theater Loudspeaker System

O W N E R ' S M A N U A L

AMC. Owner s Manual dp

Component Speaker System OWNER'S MANUAL

STUDIO L SERIES L810, L820, L830, L880, L890, LC1, LC2 OWNER S GUIDE

DALI SPEKTOR WHITEPAPER

L200e, L300e, L400e. /,J/: / analog and. a/u 5 digital systems. Miniature loudspeaker system Owner's manual

Coaxial Speaker System OWNER S MANUAL

HOME CINEMA SPEAKER PACKAGE

JBL ES SERIES ES10, ES20, ES30, ES80, ES90, ES100, ES25C OWNER S GUIDE

PROFESSIONAL SOUND SYSTEMS. Programme 105 / 105T OPERATING MANUAL AND USER GUIDE 108 / 108T 205 / 205T 206 / 206T 406 / 406T.

MASK4(T) & MASK6(T) Instruction manual

Trimless In-Ceiling & In-Wall

VAS12SUB / VAS15SUB VAS18SUB SHAKER SUBWOOFER SYSTEMS

SI 26. speakers. n Exclusive conical horn design. n 1" (2.5 cm) ferrofluid-cooled, aluminum dome tweeter

PROFESSIONAL SERIES IN-CEILING PS-C63RT. Introducing the Sonance Professional Series. Features & Benefits. Applications SONANCE PROFESSIONAL SERIES 1

Transcription:

INSTALLATION INSTRUCTIONS Ceiling and In-Wall Speaker Systems INTRODUCTION The XTC and XTC Reference series loudspeakers are the result of Xantech s commitment to build the best speakers possible. In their quest for perfection, Xantech engineers examined every aspect of their performance and design, from electronic components to structural material, even how they interact with the home environment. The Result: Flawless performance that you never thought possible from an installed speaker. Pivoting Tweeters Pivoting dome tweeters provide brilliant highs, and allow the sound field to be adjusted to fit the specifics of the listening environment. In-wall speakers can accept a Dinky Link IR receiver for a convenient, discreet mounting solution. In-ceiling speakers have an aerodynamic dome-shaped tweeter housing that eliminates woofer sound-wave restriction. FIM FIM (Flexible Impedance Matching) binding posts provide a more dependable solution for adding a second pair of speakers to a room or zone. One post is set for 6 ohms, delivering maximum SPL. Another flexible post provides 8 ohms for attaching two speaker pairs in parallel without harming the amplifier. XTC Technology Xantech XTC technology delivers amazing sound quality. Custom-designed crossovers deliver a pure, smooth tonal range that goes beyond the typical expectations of an installed speaker. High-density MDF Baffles The In-Wall baffles are constructed with the same high-density MDF wood material found in premium box speakers. An MDF based speaker provides sonic clarity by reducing vibrations and resonance. The XTC baffle design increases dynamics, provides solid bass and midrange performance. SoundPATH Bridge Design The XTC Reference In-Ceiling baffles are designed to eliminate the adverse-effects of having the tweeter placed directly over the woofer. SoundPATH s solid-density bridge design provides sonic clarity by reducing vibrations and resonance. An aerodynamic shape eliminates woofer sound-wave restriction. XA and XB Series The XTC series is also known by the model numbers as the XB series. The XTC Reference series is also known by the model numbers as the XA series. 08905092C - 1 -

APPLICATION SINGLE ZONE A single zone setup can be created using an audio receiver, general purpose amplifier, or a multiroom amplifier. The figure below shows a typical stereo left and right speaker setup. APPLICATION SMALL AREA (BATHROOM, LAUNDRY ROOM) Small areas such as bathrooms and laundry rooms may not have enough room for a pair of left and right speakers. The XA65CS and XB65CS are perfect for this type of situation. The CS ceiling stereo speakers are designed with stereo left and right audio in one single installed package. The figure below shows a typical installation. 08905092C - 2 -

ADVANCED APPLICATION LARGE AREA, MULTIPLE SPEAKER SYSTEMS Large areas such as gathering rooms or banquet halls may require more than a single pair of speakers. Multiple speakers can be connected to the same amplifier channel. This application requires careful understanding of the amplifiers capabilities. 1) Determine what the minimum speaker impedance the amplifier can handle. This should be noted on the amplifier or the amplifier s instruction manual. Typically, most amplifiers can had a minimum of 4-ohms per speaker channel. 2) The XA and XB series speakers are 6-ohms. By connecting two 6-ohm speakers to one amplifier channel, a 3-ohm speaker load is created. For amplifiers with a 4-ohm minimum, this is an improper application that can cause damage to the amplifier. 3) The XA and XB series speakers provide a third wiring post for this type of application. Remove the yellow plastic cap to expose the +8 wiring post. Using the +8 wiring post will make the XA and XB series speaker 8-ohms. By connecting two 8-ohm speakers to one amplifier channel, a 4-ohm speaker load is created. For amplifiers with a 4-ohm minimum, this is an acceptable application. The figure above shows multiple speakers connected to a single output amplifier channel by using FIM (flexible impedance matching). To make sure the impedance matches the amplifiers minimum 4- ohm specification, the +8 post is used. The yellow cap that was once on the +8 post is moved to the +6 post as an added precaution. Note: A 6-Ohm load is the optimum load for a single speaker per channel. The best sound is a result of a single 6-Ohm connection. Be sure to verify the amplifiers minimum impedance capability. 08905092C - 3 -

REQUIREMENTS SPEAKER PLACEMENT The best sound can be achieved by making sure the speakers are placed is the best position possible. The surface material should be similar for right and left pairs. Also, the cavity volume behind each speaker should be identical. Placing a speaker near a corner tends to emphasize bass. Large surface areas emphasize treble. Drapes and upholstered furniture may muffle sound. Be sure that both right and left pairs are equal distance from the corners of a room and facing identical surfaces. Non-equality between the left and right speakers may result in inconsistent sound. The objective of a well designed speaker system is how well it replicates live sound. A speaker system that can present a 3-dimensional replication as if the performer is in front of the listener presents stereo imaging. The left and right channels of a speaker system are best placed 6 to 8 feet apart. The best height for the in-wall systems is where a person standing and a person sitting are within the optimum range of the tweeter. In general, the optimum height should be 4.5 feet from floor to tweeter. This height covers both standing and sitting. REQUIREMENTS WIRE For the best installation, using high-quality speaker wire is recommended. High-quality speaker wire is stranded. Do not use solid gauge wire (commonly used for 120VAC and 240VAC power connections). Wire Length Up to 50 feet Up to 100 feet Greater than 100 feet Recommended Size 16-gauge 14-gauge 12-gauge The general rule is that a heavier gauge wire is recommended for all installations, especially for long distances. Be sure to select a wire that has an easy to follow indicator (such as a white stripe or indented ridge). This will make connecting the polarity correctly an easier task. Be sure to observe the proper polarity. The positive (+) wire must always be connected to the positive (+) terminal and the negative (-) wire must always be connected to the negative terminal. An incorrect polarity connection will result in poor imagining and bass response. Note: Be sure that each wire strand is completely isolated from other connections. Frayed or poorly twisted strands may cause short circuits and damage the systems equipment. 08905092C - 4 -

CAUTION: In-Ceiling Installation Be sure that the ceiling material has a good integrity and is of a material and thickness to support the weight and vibrations of the speaker installation. NEW CONSTRUCTION INSTALLATION The preferred method for new construction installation is using Xantech s new-construction brackets. The brackets provide an installation process that protects the high-value speaker system. The bracket material is heavy-duty ABS plastic. Wings can be assembled to the frame in several locations, thus allowing the speaker system to be installed in almost any position. 1) The speaker bracket installation takes place after wiring and wall box placement has been completed. The speaker brackets are to be installed before the dry-wall process. The dry-wall contractors can accurately cut out the speaker holes using the installed speaker brackets as a reference. 2) After the dry-wall process is complete, the painting process is next. The bezel frame from the speaker system can be installed using the speaker bracket as a mounting point. There are two mounting points to fasten the bezel frame to the bracket. Remove the bezel from the speaker frame by locating and removing the shipping screws (silver) on the rear of the system. The dog-ears screws also have to be removed. With the bezel frame installed into the speaker bracket, paint can now be applied to the wall and speaker bezel. 08905092C - 5 -

3) The baffle part of the speaker system can now be installed into the speaker bezel. Place the baffle into the bezel frame. Use the dog-ears on the speaker bezel to secure the system into place. 4) Installation complete! The benefit of using the new construction speaker brackets is that you can maintain possession of the high-value portion of the speaker system instead of passing it through several different contractors. 08905092C - 6 -

EXISTING CONSTRUCTION INSTALLATION 1) Determine the location for the installed speaker. Use a stud-finder to locate the studs behind the wall. It is a good idea to use a voltage detector to determine if any live wiring is in the area. Typically an electrical or switch outlet will identify the location of a stud. The adjacent stud may be 12, 16 or 24 inches apart. 2) Using the included mounting template, draw an outline of the area that will be removed. The outline should at least 2 to 3 inches away from a stud. This will allow the proper clearance for the dog-ears. For applications where the speaker frame must be against a stud, the speaker frame has an area on each leg where direct-to-stud mounting can be applied. It is a good idea to use level to be sure the rectangular outline is level. Drill a small pilot hole to allow probe entry. 3) Use a stiff wire to probe inside the wall. Use this probe to check for obstruction such as pipes. The probe can also be used to verify the depth is adequate for the installed speaker. 4) Use a dry-wall saw or a jig-saw to slowing remove the outlined area. Place the speaker in the cavity to verify the fit and level is correct. It is recommended to loosely fill the cavity with firerated fiberglass insulation. This will prevent unwanted sound to adjacent rooms. Filling the cavity also enhances the performance of the speaker system. 08905092C - 7 -

5) Connect the speaker wires to the speaker and place the speaker inside the wall cavity. 6) Carefully tighten the clamping screws. Be sure to alternate diagonally between each screw position. For wall speakers, carefully adjust the frame level after each screw is installed. CAUTION: DO NOT OVER-TIGHTEN THE SCREWS! This may cause damage to the wall and speaker system. 7) INSTALLATION COMPLETE! 08905092C - 8 -

FINISHING TOUCH PIVOTABLE TWEETER All speaker models, except the stereo ceiling models, have pivot-able tweeters. As mentioned in the speaker placement section, the tweeter should be level to the listener s ear. Adequate Tweeter Direction Optimum Tweeter Direction Gently push the edge of the tweeter frame to adjust the angle. Be careful not to touch the dome portion of the tweeter. The tweeter must be treated with care to maintain it s high performance characteristics. FINISHING TOUCH TWEETER & EQUALIZATION SWITCH All XA series speakers are designed with a 3-position equalization switch. The center position is nominal (normal position). Moving the speaker switch towards the + will increase the equalization response. Moving the speaker switch towards the - will decrease the equalization response. The equalization will affect the treble and bass. All XB series speakers are designed with a 3-postion tweeter switch. The center position is nominal (normal position). Moving the speaker switch towards the + will increase the tweeter response. Moving the speaker switch towards the - will decrease the tweeter response. The tweeter will affect the treble only. FINISHING TOUCH PAINTING The frame and grill can be painted to match the wall or ceiling color. Included is a paint shield that is meant to replace the grill on the speaker assembly. This will protect the speaker while exposing only the frame. The grill should not be painted while assembled to the speaker assembly. It is suggested to use spray paint on the grill. Be sure the perforations (holes) in the grill do not fill with paint. Several light coats will yield the best results. 08905092C - 9 -

TROUBLESHOOTING 1. POLARITY It is a good idea to test the polarity of the speaker and wire connection. Testing the polarity confirms that positive (+) wire is connected to the positive (+) terminal on the speaker and amplifier. A reversepolarity connection (positive (+) wire connected to negative (-) terminal) will result in poor speaker performance and possibly damage the system. To test the polarity, take a 9 Volt battery. Connect the negative (-) terminal of the 9 Volt battery to the negative (-) wire. Then, while observing the woofer on a speaker, connect the positive (+) terminal of the 9 Volt battery to the positive (+) wire. If the woofer on the speaker moves outwards, the wiring polarity is correct. If the woofer on the speaker moves inward, the wiring polarity is incorrect. In this situation, it is best to correct the polarity by swapping the positive (+) and negative (-) wire on back of the speaker. 2. CHANNEL CHECK To check that the left speaker is not connected as a right speaker, you will need an amplifier or preamplifier that has BALANCE control. Turn on the system so that music is coming from the speaker system. Move the BALANCE control to the far right. The right speaker should only be producing sound. Move the BALANCE control to the far left. The left speaker should only be producing sound. If the above case is not true, then it would be easiest to correct the problem at the equipment rack. The problem may not be at the amplifier to speaker connection. It is a good idea to check source to amplifier connection as well. 3. NO SOUND FROM SPEAKER In the event that no sound from the speaker is heard, check the wiring or the items below. A. Verify the correct source is playing and is selected on the receiver\amplifier end. B. Verify mute and volume levels are correct. Verify volume control is wired properly. C. Some receivers have A or B selector switches, verify the correct output is switched. This also applies to speaker selector switches and advanced volume controls. D. A wire short-circuit may cause the amplifier to shut-down in protection mode. E. Bad connecting between the source and receiver\amplifier end. SPECIFICATIONS - OVERVIEW XTC SERIES Tweeter: Pivotable Teteron dome tweeter constructed with advance neodymium magnet, fluid cooled, and rear acoustic damping. Woofer: Durable IMG (injection molded graphite) woofer for higher sensitivity and increased sound pressure levels. Crossover: Second-order network. (12dB per octave). Premium components specified and designed into the system. XTC REFERENCE SERIES Tweeter: Pivotable Titanium dome tweeter. Rear acoustic damping and positive rubber surround removes ringing and achieves pure tones with low distortion. Woofer: Premium Al/Mg (aluminum magnesium material) woofer stays rigid during the most extreme bass notes and the agility results in accuracy and dynamic bass response. Crossover: Third-order network. (18dB per octave). Premium components specified and designed into the system. 08905092C - 10 -

SPECIFICATIONS XB525C Driver size: 5.25 Woofer / 22mm Tweeter Recommend Amplifier Power: 5-60 Watts Frequency Response: 50Hz-22kHz Overall Dimensions: 7.96" DIA. x 5.25 Depth Cut-Out Size: 6.75 DIA. Construction Bracket Available: XBKT525C XB525W Speaker Type: Wall Mount Driver size: 5.25 Woofer / 22mm Tweeter Recommend Amplifier Power: 5-60 Watts Frequency Response: 50Hz-22kHz Overall Dimensions: 11.45 W x 7.30 H x 3.75 Depth Cut-Out Size: 10.23 W x 6.08 H Construction Bracket Available: XBKT525W XB65C Driver size: 6.5 Woofer / 22mm Tweeter Recommend Amplifier Power: 5-80 Watts Frequency Response: 42Hz-22kHz Overall Dimensions: 9.24" DIA. x 5.50 Depth Cut-Out Size: 8.05 DIA. Construction Bracket Available: XBKT650C XB65W Speaker Type: Wall Mount Driver size: 6.5 Woofer / 22mm Tweeter Recommend Amplifier Power: 5-80 Watts Frequency Response: 42Hz-22kHz Overall Dimensions: 13.46 W x 8.24 H x 3.75 Depth Cut-Out Size: 12.24 W x 7.02 H Construction Bracket Available: XBKT650W XB8C Driver size: 8 Woofer / 28mm Tweeter Recommend Amplifier Power: 10-100 Watts Frequency Response: 35Hz-20kHz Overall Dimensions: 10.92" DIA. x 6.00 Depth Cut-Out Size: 9.72 DIA. Construction Bracket Available: XBKT800W XB8W Speaker Type: Wall Mount Driver size: 8 Woofer / 28mm Tweeter Recommend Amplifier Power: 10-100 Watts Frequency Response: 35Hz-20kHz Overall Dimensions: 16.37 W x 9.80 H x 4.00 Depth Cut-Out Size: 15.15 W x 8.58 H Construction Bracket Available: XBKT800W XB65CS Driver size: 6.5 Dual Coil Woofer / Twin 22mm Tweeters Recommend Amplifier Power: 5-70 Watts Frequency Response: 42Hz-22kHz Overall Dimensions: 9.24 DIA. x 6.00 Depth Cut-Out Size: 8.05 DIA. Construction Bracket Available: XBKT650C 08905092C - 11 -

SPECIFICATIONS XA65C Driver size: 6.5 Woofer / 22mm Tweeter Recommend Amplifier Power: 10-85 Watts Frequency Response: 40Hz-30kHz Overall Dimensions: 9.24" DIA. x 5.50 Depth Cut-Out Size: 8.05 DIA. Construction Bracket Available: XBKT650C XA65W Speaker Type: Wall Mount Driver size: 6.5 Woofer / 22mm Tweeter Recommend Amplifier Power: 10-85 Watts Frequency Response: 40Hz-30kHz Overall Dimensions: 13.46 W x 8.24 H x 3.75 Depth Cut-Out Size: 12.24 W x 7.02 H Construction Bracket Available: XBKT650W XA8C Driver size: 8 Woofer / 26mm Tweeter Recommend Amplifier Power: 10-110 Watts Frequency Response: 32Hz-24kHz Overall Dimensions: 10.92" DIA. x 6.00 Depth Cut-Out Size: 9.72 DIA. Construction Bracket Available: XBKT800C XA8W Speaker Type: Wall Mount Driver size: 8 Woofer / 26mm Tweeter Recommend Amplifier Power: 10-110 Watts Frequency Response: 32Hz-24kHz Overall Dimensions: 16.37 W x 9.80 H x 4.00 Depth Cut-Out Size: 15.15 W x 8.58 H Construction Bracket Available: XBKT800W XA65CS Driver size: 6.5 Dual Coil Woofer / Twin 22mm Tweeters Recommend Amplifier Power: 10-80 Watts Frequency Response: 40Hz-30kHz Overall Dimensions: 9.24 DIA. x 6.50 Depth Cut-Out Size: 8.05 DIA. Construction Bracket Available: XBKT650C Xantech Corporation 13100 Telfair Avenue, 2/F Sylmar, CA 91342 Phone: (818) 362-0353, Fax: (818) 362-9506 Instructions, Speakers 2007 Xantech Corporation This document is copyright protected. No part of this manual may be copied or reproduced in any form without prior written consent from Xantech Corporation. Xantech Corporation shall not be liable for operational, technical, or editorial errors/omissions made in this document. 08905092C - 12 -