SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SHANGHAI INSPECTION AND TESTING INSTITUTE OF INSTRUMENTS AND AUTOMATION SYSTEMS CO., LTD. 103 Cao Bao Road Shanghai, 200233 People s Republic of China Mr. Xu JianPing Phone: 86 021 64368180 306 Email: xujianping@sipai.com ELECTRICAL (EMC) Valid to: September 30, 2018 Certificate Number: 3294.01 In recognition of the successful completion of the A2LA accreditation is granted to this laboratory to perform the following tests: Test Technology: Automotive EMC Tests Electrostatic Discharge (ESD) CS-11979; CS-11809; ISO 10605; ISO 10605 (2001); JASO D001; 28400 NDS09; 28400 NDS10; B21 7110; MGR ES:62.61.627; MES PW 67600; TL 824 66; VW 801 01 RF Conducted Emissions CISPR 25; CS-11979; CS-11809; 9.90110; 7-Z0443; B21 7090; 28400 NDS05; EDS-T-5006; B21 7110; MGR ES:62.61.627; MES PW 67600; T-752 DELCO Radiated Disturbance CISPR 25; CS-11979; CS-11809; E/ECE/324 R10; MIL-STD-461F; B21 7090; 9.90110; 7-Z0472; 28400 NDS21; B21 7110; MES PW 67600; DC-10614 (A2LA Cert. No. 3294.01) Revised 08/03/2017 Page 1 of 5
Automotive EMC Tests (cont.) Bulk Current Injection (BCI) ISO 11452-4; GMW 3097 (2012); CS-11979; CS11809; 7-Z0446 Radiated Immunity (Substitution Method, Metallic and Non-metallic Table) Radiated Immunity (Pulse Modulation) Radiofrequency Electromagnetic Field Immunity Test ISO 11452-2; GMW 3097 (2012); CS-11979; CS-11809 ISO 11452-2; GMW 3097 (2012); CS-11809; CS-11979 ISO 11452-5; GMW 3100; E/ECE/324 R10; 9.90110; B21 7090; B21 7110; MGR ES:62.61.627; MES PW 67600; VW 801 01; TL 821 66 Conducted Disturbance CISPR 25; GMW 3100; T-752 DELCO; 9.90110; DIN 57 879; B21 7090; B21 7110; MES PW 67600; TL 965; VW 801 01 Electrical Load ISO 16750-2; GMW 3172 (2010); DC 10615; 7-Z0444; JASO D 001; B21 7090; 28400 NDS02; 28400 NDS81; 28400 NDS01; B21 7110; MGR ES:62.61.627; MES PW 67600 Magnetic Field Immunity GMW 3097 (2012); MIL-STD-461F; JASO D 001; 9.90110; 28400 NDS22; B21 7110; EDS-T-5514; MES PW 67600 Low Frequency Conducted Immunity 28400 NDS02; B21 7110; MGR ES:62.61.627; MES PW 67600 (A2LA Cert. No. 3294.01) Revised 08/03/2017 Page 2 of 5
Automotive EMC Tests (cont.) Electrical Transient Conduction Along Lines ISO 7637-1; ISO 7637-2; ISO 7637-3 (excluding DCC); JASO D 001; 7-Z0440; 7-Z0441; MES PW 67600; B21 7090; 28400 NDS04; 28400 NDS03; MGR ES:62.61.627; MES PW 67600; VW 801 01; TL 823 66; TL 820 66 Voltage Transient Emission Test ISO 7637-1; ISO 7637-2; 9.90110; 7-Z0471; B21 7090; 28400 NDS28; B21 7110; MGR ES:62.61.627; MES PW 67600 Basic EMC Tests Generic / Product Specific IEC 61000-6-1; EN 61000-6-1; IEC 61000-6-2; EN 61000-6-2; IEC 61000-6-3; EN 61000-6-3; IEC 61000-6-4; EN 61000-6-4; IEC 60601-1-2; EN 60601-1-2; IEC 61326-1; EN 61326-1; IEC 61326-2-1; EN 61326-2-1; IEC 61326-2-2; EN 61326-2-2; IEC 61326-2-3; EN 61326-2-3; IEC 61326-2-4; EN 61326-2-4; IEC 61326-2-5; EN 61326-2-5; IEC 61326-2-6; EN 61326-2-6; IEC 61326-3-1; EN 61326-3-1; IEC 61326-3-2; EN 61326-3-2; EN 12015; EN 12016; IEC 61000-2-2; CISPR 14-1; EN 55014-2; CISPR 14-2; EN 55020; EN 55024; CISPR 24; EN 300 386; IEC 60945; IEEE STD C62.91.2; NRC RG 1.180 Current Harmonic and Voltage Flicker IEC 61000-3-2; EN 61000-3-2; IEC 61000-3-3; EN 61000-3-3 Electrostatic Discharge (ESD) IEC 61000-4-2; EN 61000-4-2 Radiated Immunity IEC 61000-4-3; EN 61000-4-3 Electrical Fast Transient/Burst IEC 61000-4-4; EN 61000-4-4 (A2LA Cert. No. 3294.01) Revised 08/03/2017 Page 3 of 5
Basic EMC Tests (cont.) Surge Immunity IEC 61000-4-5; EN 61000-4-5; IEEE ANSI C62.45 Conducted Immunity IEC 61000-4-6; EN 61000-4-6 Power Frequency Magnetic Field Immunity IEC 61000-4-8; EN 61000-4-8 Pulse Magnetic Field Immunity Test IEC 61000-4-9; EN 61000-4-9 Damped Oscillatory Magnetic Field Immunity Test Voltage Dips, Short Interruptions and Line Voltage Variations IEC 61000-4-10; EN 61000-4-10 IEC 61000-4-11; EN 61000-4-11; IEC 61000-4-29; EN 61000-4-29 Ring Wave Immunity Test EN 61000-4-12; IEC 61000-4-12 Damped Oscillatory Wave Immunity Test IEC 61000-4-18 Harmonics and Inter-harmonics including Mains Signaling at A.C. Power Port, Low Frequency Immunity Tests Supply Voltage and Frequency Variations Immunity Test Test for Immunity to Conducted, Common Mode Disturbances in the Frequency Range (0 to 150) khz Radiated & Conducted Emissions (Radiated up to 18 GHz) EN 61000-4-13; IEC 61000-4-13 IEC 61000-4-14; EN 61000-4-14; IEC 61000-4-28; EN 61000-4-28 EN 61000-4-16; IEC 61000-4-16 FCC Part 15 B (using ANSI C63.4-2009); FCC Part 18 (using MP5-1986); CISPR 11; EN 55011; CISPR 13; EN 55013; CISPR 14-1; EN 55014-1; CISPR 22; EN 55022; CISPR 32; IEC 61000.6.3; IEC 61000.6.4 Disturbance Power CISPR 14-1; EN 55014-1; ANSI C63.4:2009 Military EMC Tests Conducted Emissions Conducted Susceptibility Radiated Emissions Radiated Susceptibility MIL-STD-461E/F/G CE101, CE102 MIL-STD-461E/F/G CS101, CS114, CS115, CS116 MIL-STD-461E/F/G RE101, RE102 MIL-STD-461E/F/G RS101, RS103 (A2LA Cert. No. 3294.01) Revised 08/03/2017 Page 4 of 5
US NRC EMC Tests Guidelines for Evaluating EMC and RF Interference in Safety Related Instrumentation and Control Systems US NRC Regulatory Guide 1.180 Revision 1, (2003 Oct) Testing Activities Performed in Support of FCC Declaration of Conformity and Certification in Accordance with 47 Code of Federal Regulations and FCC KDB 974614, Appendix A, Table A.1 # Rule Subpart/Technology Test Method Maximum Frequency (MHz) Industrial, Scientific, and Medical Equipment Part 18 FCC MP-5 (February 1986) 18000 # Accreditation does not imply acceptance to the FCC equipment authorization program. Please see the FCC website (https://apps.fcc.gov/oetcf/eas/) for a listing of FCC approved laboratories. (A2LA Cert. No. 3294.01) Revised 08/03/2017 Page 5 of 5
Accredited Laboratory A2LA has accredited SHANGHAI INSPECTION AND TESTING INSTITUTE OF INSTRUMENTS AND AUTOMATION SYSTEMS CO., LTD. Shanghai, People s Republic of China for technical competence in the field of Electrical Testing This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated 8 January 2009). Presented this 25 th day of October 2016. President and CEO For the Accreditation Council Certificate Number 3294.01 Valid to September 30, 2018 Revised August 3, 2017 For the tests to which this accreditation applies, please refer to the laboratory s Electrical Scope of Accreditation.