Each year, Neptronic produces thousands of humidifiers to meet a diverse and expanding worldwide demand. Great care has been taken to select materials which have proven themselves for their exceptional performance in very harsh conditions. The SKS series of steam-to-steam humidifiers offers an innovative design and trouble free operation. Chemical free steam is produced by using on-site boiler steam as a heat source. The wide modulation range, high capacities and ease of servicing makes it the most dependable and best humidifier on the market. The attractive and innovative design of the SKS has a scale management system that simplifies the maintenance of scale removal. The SKS also uses a patented water level control called the AFEC System which is energy efficient. Modulating Controls The SKS are supplied with a linear actuated globe valve giving full modulating control of low pressure steam. Principle of Operation The main energy source of the SKS is either raw steam under pressure or high temperature hot water (HTHW) from a central boiler. The raw steam or HTHW passes through the heat exchanger of the humidifier, thus providing the energy to produce clean sterilized steam to be distributed to the Air Handling Unit (AHU) system.
Features Capacities from 45-568 kg/hr of clean steam Maximum boiler steam pressure 103 kpa on standard unit to 689 kpa on special applications Plated copper and stainless steel heat exchangers are available Uses either Domestic, RO or DI water Comprehensive system of scale management AFEC system, mass measuring water sensor Temperature of the drain water is tempered below 60ºC Ease of servicing: cleans and re-installs within minutes BACnet remote communications protocol Simplicity of Operation and Service Easy to remove scale trap trays The SKS offers built in scale trap trays located at the bottom of the evaporation chamber. These trays can be accessed from the top of the unit allowing for easy maintenance and scale removal. Self Cleaning System A comprehensive system of scale management where the supply of cold water at the sloped bottom of the evaporation chamber forces the precipitated mineral deposits into the scale trap trays.
The AFEC - System The AFEC technology developed by the Neptronic engineering team offers a unique, safe and energy efficient control of boiling water and steam. The AFEC system consists of a mass measuring water sensor, antifoam sensor, electronic high temperature sensor, interactive LCD display and microprocessor controller. The AFEC system is unique because the water level sensor cannot be falsely triggered by foam forming on the surface of the boiling water. The foam sensing probe which is unique to our design automatically initiates a drain cycle upon foam formation. Unlike other humidifiers the drain can be initiated only when necessary without having a continuous skimming to drain off expensive boiling water. AFEC is designed to work equally well in deionized, reverse osmosis or potable water. Water and Temperature Probe LCD Display & Control Panel Check Unit indicates an abnormal condition of operation Power Unit is connected to power source Fill Water supply valve is open Fan Indication that fan is on Steam Humidifier is on and there is a humidity demand Drain Unit is in drain cycle Clean steam outlet(s) Control panel Raw steam or HTHW Inlet(s) Condensate or return outlet(s) Power supply Electrical controls Main drain outlet Water supply inlet Exceptional Reliability Legs (Optional) Skirt Panels (Optional) The SKS was designed and built upon the Neptronic philosophy to provide high quality, safe, easily maintained and energy efficient units. The fully enclosed cabinet eliminates the possibility of accidental contact with hot surfaces and saves energy by virtue of the insulated panels. Adjustable legs (optional) can be provided in order to ensure proper level when installed directly on the floor. Skirt panels are also available (see illustration above).
Steam Distribution Systems In order to prevent the accumulation of condensation in air ducts, NEP has designed 2 basic configurations of steam distribution to provide the most economical solution for any particular application. A "Multi-Steam" System The multi-steam system is to be installed in critical locations, particularly where absorption distances are very short (less than 900mm) or low air duct temperatures are in effect. "S.A.M.E2" (steam absorption manifold) The SAME2 is to be installed where absorption distances are short (less than 1500mm) and/or low duct temperatures are in effect. Technical Information Dimensions in cm Weight kg A B Model In A B C D Empty 4 í [10.1] Operation SKS-100 50.0 116.3 66.5 112.0 120 221 6 í [15.2] SKS Neptronic SKS-130 50.0 116.3 66.5 112.0 122 220 30.5 C SKS-190 57.9 116.3 74.7 120.1 141 263 SKS-290 57.9 120.0 74.7 120.1 143 280 D SKS-390 69.9 149.3 69.3 114.8 179 E 376 F SKS-500 69.9 149.3 69.3 114.8 182 373 SKS-690 78.7 149.3 84.3 128.8 213 501 2.6 í SKS-950 78.7 149.3 84.3 128.8 215 [6.6] 531 SKS-1250 76.2 149.3 107.2 153.2 259 715 G Heat Exchanger - SLP Stainless Steel 316 - Low Pressure (103 kpa Max.) Model Nb of heat exc. Output steam capacity kg/h for supply steam pressure 34.5kPa 55.1kPa 68.9kPa 82.7kPa 103.4kPa Steam outlet Qty & Ø mm SKS-100-SLP 1 15 24 30 36 45 (1x) 76 SKS-130-SLP 1 19 31 39 47 59 (1x) 76 SKS-190-SLP 1 28 46 57 69 86 (1x) 76 SKS-290-SLP 1 44 70 87 105 132 (1x) 108 SKS-390-SLP 1 59 94 118 142 177 (1x) 108 SKS-500-SLP 1 76 121 151 182 230 (1x) 133 SKS-690-SLP 1 104 167 209 251 314 (1x) 133 SKS-950-SLP 1 144 230 287 345 432 (2x) 108 SKS-1250-SLP 2 189 303 378 454 568 (2x) 133 Heat Exchanger - CHP Plated Copper High Pressure (689 kpa Max.) Model Output steam capacity kg/h for supply steam pressure 116 C 121 C 127 C 138 C 149 C 160 C 170 C 69kPa 103kPa 137kPa 241kPa 344kPa 517kPa 689kPa Steam outlet Qty & Ø mm SKS-200-CHP 18 30 39 69 99 150 200 (1x) 108 SKS-333-CHP 29 50 66 116 166 249 333 (2x) 108 SKS-667-CHP 59 100 132 231 331 499 667 (2x) 133
distributed by: Manufacturer of actuators, actuated valves, controls, humidifiers and electric heaters. Head Office National Environmental Products Ltd 400 Lebeau Blvd, Montreal, Quebec H4N 1R6 Tel.: (514) 333-1433 Fax: (514) 333-3163 Toll Free (Canada/USA): 1-800-361-2308 U.S. Office NEP Inc. 355 North Main Street, Suite 2 Hiawassee, Georgia 30546 Tel.: (954) 421-6216 Fax: (954) 421-8785 Middle East & India NEP International P.O. Box 125687, Dubai, UAE Tel.: +97155 8825487 Fax: +9714 3362778 email: shyam@neptronic.com Copyright 2012, Neptronic All Rights Reserved. 090001 _KS 090911