HOT FOOD HUMIDITY CABINET

HOT FOOD HUMIDITY CABINET MODEL HFD- Installation and Operation Instructions 2M-Z02 Rev. M 8//20 HFD-

SAFETY SYMBOL These symbols are intended to alert the user to the presence of important operating and maintenance instructions in the manual accompanying the appliance. RETAIN THIS MANUAL FOR FUTURE REFERENCE NOTICE Using any part other than genuine Star factory supplied parts relieves the manufacturer of all liability. Star reserves the right to change specifications and product design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment. Due to periodic changes in designs, methods, procedures, policies and regulations, the specifications contained in this sheet are subject to change without notice. While Star International Holdings Inc., Company exercises good faith efforts to provide information that is accurate, we are not responsible for errors or omissions in information provided or conclusions reached as a result of using the specifications. By using the information provided, the user assumes all risks in connection with such use. MAINTENANCE AND REPAIRS Contact your local authorized service agent for service or required maintenance. Please record the model number, serial number, voltage and purchase date in the area below and have it ready when you call to ensure a faster service. Model No. Serial No. Voltage Purchase Date Authorized Service Agent Listing Reference the listing provided with the unit or for an updated listing go to: Website: E-mail www.star-mfg.com Service@star-mfg.com Service Help Desk Business 8:00 am to :30 p.m. Central Standard Time Hours: Telephone: (3) 78-303 Fax: (3) 78-27 E-mail Website: Parts@star-mfg.com Service@star-mfg.com Warranty@star-mfg.com www.star-mfg.com Mailing Address: Star International Holdings Inc., Company 0 Sunnen Drive St. Louis, MO 33 U.S.A 2

. Add water to pan and adjust bottom 2. Adjust top dial to desired temperature 3. Drain and clean water pan daily dial to desired humidity. Consult Operator's manual for complete Information on operating and cleaning.. Do not run dry 33 PRODUCT IDENTIFICATION Humidified Cabinet Models: HFD- 20V, HFD--P 20V, HFD--CR 20V, HFD- 20V*, HFD--P 20V, HFD--CR 20V * These models are equipped with European cord set and 20V elements. Note: - = Multipurpose Shelving; --P = Pretzel Rack; --CR = Pizza Rack All models were designed and tested to the guidelines set forth by the National Sanitation Foundation (NSF), Standard Number. SPECIFICATIONS Capacity: Electrical: Dimensions: Weight: 8 large pretzels/bagels (P models), three 2" (30 cm) pizzas (CR models) 3 multi-purpose shelves 20 volt, 0/0 hertz, single phase, 280 watts, 0. amps 20 volt, 0/0 hertz, single phase, 280 watts,.3 amps "W x "D x 28-/"H (38. cm W x 38. cm D x 7.7 cm H) Approximately 0 lbs. (27.2 Kg) OPERATING CONTROLS The temperature controls are located at the top of the unit above the door and the humidity controls are located on the bottom of the unit below the door (see illustrations below). OPERATING INSTRUCTIONS CAUTION: HOT RACKS Do NOT Rotate Manually STAR MANUFACTURING INT'L INC 2 0 3 P.O. BOX 3029 ST. LOUIS, MO TEMPERATURE CONTROL HUMIDITY CONTROL 2 0 3 LOW WATER POWER Door Switch Drain Tube Humidity Dial Low Water Indicator ON/OFF Switch Temperature Dial Allows the rotisserie motor to rotate when the door is closed. Allows the water reservoir to be emptied during cleaning. Adjusts cabinet humidity. Illuminates when water needs to be added. Activates cabinet light, and air circulation system. Adjusts cabinet temperature. 3

200 80 0 0 20 00 F 90 80 70 0 0 0 C CAUTION CAUTION This equipment is designed and sold for commercial use only by personnel trained and experienced in its operation and is not sold for consumer use in and around the home nor for use directly by the general public in food service locations. All shipping containers should be checked for freight damage both visible and concealed. This unit has been tested and carefully packaged to insure delivery of your unit in perfect condition. If equipment is received in damaged condition, either apparent or concealed, a claim must be made with the delivering carrier. Concealed damage or loss - if damage or loss is not apparent until after equipment is unpacked, a request for inspection of concealed damage must be made with carrier within days. Be certain to retain all contents plus external and internal packaging materials for inspection. The carrier will make an inspection and will supply necessary claim forms.. INSTALLATION Each machine has been properly wired and inspected at the factory for operation on the voltage and type of current specified on the nameplate. Machines with a nameplate stamped 20V, are equipped for operation on 20 volt 0/0 hertz AC single phase service. Machines with a nameplate stamped 20V, are equipped for operation on 20 volt 0/0 hertz AC single phase service. Each condition must be connected to a separate amp circuit with a 3 wire grounded, polarized receptacle. DO NOT CONNECT TO ANY OTHER TYPE OF CURRENT OR THE MACHINE WILL WARNING BE SERIOUSLY DAMAGED. The guarantee of this machine as covered by the warranty card does not apply if an improper installation has been made. GENERAL OPERATING INSTRUCTIONS DO NOT BLOCK VENT HOLES ON TOP OF THE CABINET CAUTION. Ensure cabinet is plugged into the proper voltage receptacle prior to turning on. 2. Fill reservoir with water (distilled preferred) such that the water is approximately level with the top of the water reservoir (low water indicator should extinguish). Capacity is 3/ gallon (2.8 L). CAUTION: DO NOT OVERFILL! 3. Follow preheat instructions on the following page. Allow approximately minutes for the machine to reach the proper temperature.. Monitor product temperature via the thermometer (see Figure 3).. Load product into the racking system. For maximum product freshness, adjust the settings as specified. Pizza and pretzel racks are adjustable for different applications using the screws provided.. Periodically monitor the water level by the red indicator light on the lower control panel. If the light is illuminated, add water (distilled preferred) until the indicator light is no longer illuminated or to the maximum recommended water level (see Figure ). CAUTION DO NOT OVERFILL! 7. See attached sketch for instructions on reversing the door. Figure 3

CLEANING INSTRUCTIONS. Disconnect the electrical cord before cleaning the cabinet. 2. To maintain the finish and shine of the unit, wipe it daily with a damp cloth and mild soap. Do not use harsh detergents or scouring pads. 3. Daily cleaning of the inside glass, bottom pan and racking system with a damp cloth is recommended.. Unscrew the drain cap to drain the water reservoir. After the water reservoir is empty, recap the drain tube and fill to the recommended water level (see Figure ). Recommended Dial Settings Temp Humidity Preheat 2 Pizza High Pretzels / Bagels STAR MANUFACTURING INT'L INC P.O. BOX 3029 ST. LOUIS, MO 33 HUMIDITY CONTROL 2 Temp Dial Settings Dial Temp* 00 F / (3 C) 2 20 F / (9 C) 3 30 F / ( C) 0 F / ( C) F / (7 C) High 7 F / (80 C) 0 3 LOW WATER POWER MAXIMUM WATER LEVEL DO NOT OVERFILL! Figure Humidity Dial Settings, 2 Low 3, Medium, High CAUTION: DO NOT OVERFILL! * Dial Setting For Desired Temperature (Approx.) All settings are recommendations only and could vary depending on product preparation, cooking time, and internal food temperature. MAINTENANCE AND REPAIRS Contact the factory, a service representative or a local service company for service or required maintenance.

Visit our Website at: www.star-mfg.com The foregoing warranty is in lieu of any and all other warranties expressed or implied and constitutes the entire warranty. FOR ASSISTANCE Email: service@star-mfg.com THOROUGHLY INSPECT YOUR UNIT ON ARRIVAL This unit has been tested for proper operation before leaving our plant to insure delivery of your unit in perfect condition. However, there are instances in which the unit may be damaged in transit. In the event you discover any type of damage to your product upon receipt, you must immediately contact the transportation company who delivered the item to you and initiate your claim with same. If this procedure is not followed, it may affect the warranty status of the unit. LIMITED EQUIPMENT WARRANTY All workmanship and material in Star products have a one () year limited warranty on parts & labor in the United States and Canada. Such warranty is limited to the original purchaser only and shall be effective from the date the equipment is placed in service. Star's obligation under this warranty is limited to the repair of defects without charge, by the factory authorized service agency or one of its sub-agencies. Models that are considered portable (see below) should be taken to the closest Star service agency, transportation prepaid. > Star will not assume any responsibility for loss of revenue. > On all shipments outside the United States and Canada, see International Warranty. * The warranty period for the Ultra-Max, Hot Plates, Griddles, Charbroilers is (3) years parts & labor. * The warranty period for the Star-Max, Charbroilers, Griddles, Hot Plates, Fryers & Finishing Oven is (2) years parts & labor. * The warranty period for the JetStar six () ounce & Super JetStar eight (8) ounce series popcorn machines is two (2) years. * The warranty period for the Chrome-Max Griddles is five () years on the griddle surface. See detailed warranty provided with unit. * The warranty period for Dura-Tec coatings is one year under normal use and reasonable care. This warranty does not apply if damage occurs to Dura-Tec coatings from improper cleaning, maintenance, use of metallic utensils, or abrasive cleaners, abrasive pads, product identifiers and point-of-sale attachments, or any other non-food object tha comes in continuous contact with the roller coating. This warranty does not apply to the non-stick properties of such materials. > This warranty does not apply to "Special Products" but to regular catalog items only. Star's warranty on "Special Products" is six () months on parts and ninety (90) days on labor. > This warranty does not apply to any item that is disassembled or tampered with for any purpose other than repair by a Star Authorized Service Center or the Service Center's sub-agency. > This warranty does not apply if damage occurs from improper installation, misuse, wrong voltage, wrong gas or operated contrary to the Installation and Operating instructions. > This warranty is not valid on Conveyor Ovens unless a "start-up/check-out" has been performed by a Factory Authorized Technician. PARTS WARRANTY Parts that are sold to repair out of warranty equipment are warranted for ninety (90) days. The part only is warranted, the labor to replace the part is NOT warranted. SERVICES NOT COVERED BY WARRANTY. Travel time and mileage rendered beyond the 0 mile radius limit 2. Mileage and travel time on portable equipment (see below) 3. Labor to replace such items that can be replaced easily during a daily cleaning routine, ie; removable kettles on fryers, knobs, grease drawers on griddles, etc.. Installation of equipment. Damages due to improper installation. Damages from abuse or misuse 7. Operated contrary to the Operating and Installation Instructions 8. Cleaning of equipment 9. Seasoning of griddle plates installation OR created by acts of God PORTABLE EQUIPMENT Star will not honor service bills that include travel time and mileage charges for servicing any products considered "Portable" including items listed below. These products should be taken to the Service Agency for repair: * The Model 0FD, 0FF Fryer. * The Model 2TOA Toaster Oven. * The Model JR, oz. Popcorn Machine. * The Model 8CMA & 2CMA Cheese Melter. * The Model 2MC & MC & 8MCP Hot Food Merchandisers. * The Model 2NCPW & NCPW Nacho Chip/Popcorn Warmer. * All Hot Dog Equipment except Roller Grills & Drawer Bun Warmers. * All Nacho Cheese Warmers except Model WLA Series Nacho Cheese Warmer. * All Condiment Dispensers except the Model HPD & SPD Series Dispenser. * All Specialty Food Warmers except Model 30R, RW Series, and WSA Series. * All QCS/RCS Series Toasters except Model QCS3 & RCS3 Series. * All Fast Steamer Models except Direct Connect Series. 0. Voltage conversions. Gas conversions 2. Pilot light adjustment 3. Miscellaneous adjustments. Thermostat calibration and by-pass adjustment. Resetting of circuit breakers or safety controls or reset buttons. Replacement of bulbs 7. Replacement of fuses 8. Repair of damage created during transit, delivery, & ALL: * Pop-Up Toasters * Butter Dispensers * Pretzel Merchandisers (Model PD-A Only) * Pastry Display Cabinets * Nacho Chip Merchandisers * Accessories of any kind * Sneeze Guards * Pizza Ovens (Model PO2 Only) * Heat Lamps * Pumps-Manual Should you need any assistance regarding the Operation or Maintenance of any Star equipment; write, phone, fax or email our Service Department. In all correspondence mention the Model number and the Serial number of your unit, and the voltage or type of gas you are using. 2M-97-2 /2/

7

8

. Add water to pan and adjust bottom dial to desired humidity 2. Adjust top dial to desired temperature 3. Drain and clean water pan daily. Do not run dry. Consult Operator's manual for complete Information on operating and cleaning. CAUTION: HOT RACKS Do NOT Rotate Manually 0 2 3 F C 72 OPERATING INSTRUCTIONS TEMPERATURE CONTROL 3 32 3 38 3 200 90 80 80 0 70 0 0 20 0 00 0 2 23 27 33 7 0 37 39 3 3 2 20 2 28 29 3 2 3 2 2 22 20 30 8 2 9 7 9 0 9 2 3 3 8 THIS DRAWING CONTAINS INFORMATION CONFIDENTIAL TO STAR MFG. INT'L. INC. NO REPRODUCTION OR DISCLOSURE OF ITS CONTENTS IS PERMITTED. MODEL: HFD- 20V/20V 9 STAR MANUFACTURING INTERNATIONAL INC. SK0 Rev E 0/0/200

STAR MANUFACTURING INT'L INC P.O. BOX 3029 ST. LOUIS, MO 33 200 90 80 80 0 0 20 0 00 0 F C 7 8 9 3 0 2 3 2 3 7 0 70 0 HUMIDITY CONTROL 2 3 0 LOW WATER POWER 8 7 3 9 9 8 THIS DRAWING CONTAINS INFORMATION CONFIDENTIAL TO STAR MFG. INT'L. INC. NO REPRODUCTION OR DISCLOSURE OF ITS CONTENTS IS PERMITTED. MODEL: HFD- STAR MANUFACTURING INTERNATIONAL INC. SK Rev D 03/22/200 0

PARTS LIST August, 203 Rev. M Model HFD- Humidified Cabinet Fig No. Part No. Qty Description Cabinet Application C3-G802 20V CORD ASSEMBLY C3-3922 20V 2 2K-Y298 BUSHING - STRAIN RELIEF 3 2I-Z007 FOOT D-Z03 GLASS CHANNEL VERTICAL D-Z03 GLASS CHANNEL HORIZONTAL 2Q-Z08 3 GLASS - SIDE 7 2K-39 BUSHING - HEYCO 8 D-Z032 BOTTOM 9 2E-Y98 2E-Z02 RELAY 0 2E-Z0802 WIRE HARNESS - BOTTOM 2N-Z33 2N-Z9 ELEMENT - ASSEMBLY 2 2T-Z20 THERMOSTAT - BOTTOM 3 2R-Y82 2 KNOB D-Z089 BODY - RESERVOIR D-220093 FLOAT-SWITCH ASSEMBLY D-2203 TRAY - ASSEMBLY 7 D-220072 PAN - ASSEMBLY 8 9 D-Z379 2 DOOR - LATCH manufactured after 7/2000 D-Z0 DOOR - LATCH manufactured before 7/2000 D-22009-PS HFD- DOOR SERVICE KIT manufactured before 7/2000 D-22009 DOOR ASSEMBLY HFD- manufactured after 7/2000 20 2I-Z0877 2 GLASS CHANNEL - HORIZONTAL DOOR 2 2I-Z087 GLASS CHANNEL - VERTICAL DOOR 22 2Q-Z079 GLASS DOOR 23 2I-Z078 HINGE - DOOR 2 2A-Y808 2 PIN - DOWEL 2 A3-329 CAP AND CHAIN 2 2I-9772 GASKET 27 2E-Y9700 SWITCH - INTERRUPT 28 29 2J-Y89 2J-Z2329 PILOT LIGHT PS-2207 SWITCH KIT SERVICE KIT (manufactured before /200) 2E-Z009 SWITCH (manufactured after /200) 30 2I-Z0878 DOOR - GASKET 3 2M-Z0880 BOTTOM - LABEL 32 D-Z03 HINGE - BRACKET (TOP) 33 D-Z02 HINGE - BRACKET (BOTTOM) IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED PAGE INCLUDE MODEL AND SERIAL NUMBER OF 2 Some items are included for illustrative purposes only and in certain instances may not be available. 20V 20V 20V 20V 20V 20V Star Manufacturing International, Inc.

PARTS LIST August, 203 Rev. M Model HFD- Humidified Cabinet Fig No. Part No. Qty Description et Application 3 D-Z0320 CONTROL PANEL 3 D-Z039 3 ANGLE - BOTTOM 3 D-Z032 2 CORNER - POST 37 D-Z0323 CORNER - POST RIGHT DOOR 38 D-Z0322 CORNER - POST LEFT DOOR 39 2T-Z03 THERMOMETER 0 D-Z038 2 FILLER - POST D-Z03 RACK ANGLE - LEFT DOOR 2 D-Z032 RACK ANGLE - RIGHT DOOR 3 D-Z03 RACK ANGLE - RIGHT D-Z033 RACK ANGLE - LEFT D-Z00 TOP COVER 2M-Z0879 TOP LABEL 8 2B-Z899 3 HOLDER ASSEMBLY 9 D-220079 PRETZEL SHAFT 0 2B-Z93 ASSEMBLY - PIZZA SHAFT 2B-Z7 3 SHELF - PIZZA RACK 2 2B-Z030 3 SHELF 3 2N-Z0337 ELEMENT - AIR 20V 3 2N-Z0793 ELEMENT - AIR 20V D-Z090 COVER - DUCT D-Z092 BACK - DUCT D-Z09 FRONT - DUCT 7 2U-Z83 BLOWER - ASSEMBLY 8 2E-Z00 HARNESS - TOP 9 D-22008 REFLECTOR - ASSEMBLY 0 2E-Y98 SOCKET D-Z077 TOP LINER 2 2S-Y98 2S-Z030 LAMP 00W 3 D-Z739 2U-Z32 MOTOR - ROTISSERIE, Fan Not Included -- 2U-Z98 FAN BLADE FOR MOTOR D-Z70 THERMOSTAT BRACKET 2T-Z09 THERMOSTAT - TOP -- 3 SOCKET HEAD CAP SCREW (SUPPLIED WITH ITEM 8) 7 2C-Z COTTER - PIN 8 2M-Z089 DOOR DECAL 9 2I-Z03 GASKET - PAN 7 2C-Z0 SCREW 3/ ALLEN HEAD 72 2M-Z089 DOOR DECAL, FRESH & FAST 20V 20V 20V 20V IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED PAGE 2 INCLUDE MODEL AND SERIAL NUMBER OF 2 Some items are included for illustrative purposes only and in certain instances may not be available. Star Manufacturing 2 International, Inc.