FIRE SAFETY AIR TREATMENT FIRE DAMPERS ESAR SMOKE CONTROL DAMPER» TECHNICAL CATALOGUE
2 ESAR Smoke control damper Technical catalogue Circular smoke control damper ESAR is specially designed to use in single fire compartment applications as a closing or as an opening damper for smoke extract purposes. ESAR is fulfilling the new european product standard EN 12101-8 requirements for single compartment applications and it is CE marked. The product has been tested according to EN 1366-10 fulfilling fire class E 120 S with pressure class 1000 Pa and temperature class 600 C. ESAR dampers are suitable both for automatically by a fire alarm activated systems (AA) and manually, after the fire has started, by fire fighter activated systems (MA), 25 min open / close. ESAR smoke control damper is designed so, that opening or closing can be made even 25 minutes after the fire has started, in 600 C. Factory mounted electrical actuator is placed inside fire resistant calcium-silicate box. By design phase and installation work it is very important to notice, that all cable system with connection boxes has to be done by fire resistant products. Electrical actuator changes the damper position from open or close with transfer time not more than 60 s. If the electricity is cut off, damper blade will remain in its position. Smoke control damper has two safety positions open or closed Smoke control damper is activated to transfer to safety position automatically by smoke detection or manually by switch used by fire fighters. Electrical actuator has 2 free auxiliary switches for open / close position indication Flow direction has no affect to the function of the damper PRODUCT DATA Sizes Ø100 - Ø630 mm (rectangular ESAS dampers with round connection pieces are used for bigger sizes) CE marking ESAR MPA No. 0761-CPD-0278 Fire class according to EN 13501-4 E600 120 (ve i <-> o) S1000C300MAsingle The fire damper fulfills the requirements of leakage class 3 according to EN 1751. The damper casing fulfills the requirements of leakage class C according to EN 1751. Pressure drop across a closed damper may amount to 2500 Pa. PRODUCT CODE EXAMPLE Smoke control damper ESAR-315-54-1 Smoke control damper ESAR is always delivered with factory mounted elctrical actuator 24 V or 230 V. Actuator is placed inside calcium-silicate box.
Technical catalogue ESAR Smoke control damper 3 TECHNICAL DATA - PRESSURE DROP, SOUND DATA PRESSURE DROP Pressure drop, when the damper is fully open 100 125 160 200 250 315 400 100 500 50 630 20 p t, Pa 10 5 2 1 L p10a, db(a) 30 50 100 200 500 1000 2000 5000 10000 q v, l/s 35 40 SOUND POWER LEVEL CORRECTION BY OCTAVE BANDS Octave band (Hz) 125 250 500 1000 2000 4000 8000 Correction K oct 16 10 5 0-7 -13-18 Tolerance +/- 6 3 3 3 3 3 3 L woct = L p10a + K oct DEFINITIONS q v Air flow l/s L Woct Sound power level in kanal db L p10a Sound pressure level with 4 db room attenuation (10 m 2 sab) db(a) K oct Correction db p s Pressure drop Pa
4 ESAR Smoke control damper Technical catalogue DIMENSIONS AND WEIGHTS Li 318 E C ØD 175 515 Size ØD C E Li Weight (kg) 100 * 160 159 220 35 10,7 125 * 160 159 220 35 10,7 160 160 159 220 35 10,3 200 200 203 260 35 10,8 250 250 237 310 40 11,2 315 315 281 380 40 13,3 400 400 390 470 60 14,7 500 500 480 570 60 17,2 630 630 600 740 60 21,6 * Delivered with extension piece BDED, when the total length is 495 mm (Ø100) or 465 mm (Ø125).
Technical catalogue ESAR Smoke control damper 5 PRODUCT CODE AND ACCESSORIES PRODUCT CODE EXTENSION PIECE FLD-AAA-1 Smoke control damper ESAR-aaa-bb-c A Size (aaa) 100, 125, 160, 200, 250, 315, 400, 500, 630 Actuator (bb) 54 = 24 V AC/DC 56 = 230 V AC Actuator model (c) 1 = Standard ACCESSORIES Ø D B C Size ØD A B C 100 80 35 10 125 80 35 10 160 80 35 10 200 80 35 10 250 100 45 10 315 100 45 10 400 162 75 12 500 162 75 12 630 130 75 12 Extension piece FLD-aaa-1 GRILLE FND-AAAA-1-1 Size (diameter mm) 100, 125, 160, 200, 250, 315, 400, 500, 630 Grille FND-aaaa-1-1 Size (diameter mm) 0100, 0125, 0160, 0200, 0250, 0315, 0400, 0500, 0630 ØD
6 ESAR Smoke control damper Technical catalogue DAMPER MOTOR WIRING DIAGRAM FOR DAMPER MOTOR Wiring of the actuator has to be done inside the fire resistant calcium-silicate box, since the cable delivered with the actuator is non fire resistant. The wiring of ESAS smoke control damper must always be done using fire resistant cables and switch boxes in order to guarantee the damper s operation in case of fire. ACTUATOR ELECTRICAL DATA Toimilaitteen jännite Maksimi teho pito / ajo Tehontarpeen mitoitus 24V AC/DC 0,5 W / 12 W 18 VA 230V AC 0,5 W / 8 W 15 VA L1-L2 open (90 ) L1-L3 closed (0 ) N L1~ + T AC 230 V AC 24 V DC 24 V Closed (<3 ) Open (>87 ) Contact between Contact between S1-S2 S4-S6 1 2 3 S1 S2 S3 S4 S5 S6 <3 <87
Technical catalogue ESAR Smoke control damper 7 DESCRIPTION AND INSTALLATION DESCRIPTION Smoke contol damper ESAR Fläkt Woods Smoke Control Damper ESAR for Single Compartment smoke control systems With factory mounted safety actuator, which is placed inside fire resistant calcium-silicate box Opening and closing with electrically driven actuator 24 V or 230 V Fire tested and CE marked according the harmonised product standard EN 12101-8 Fire class according to EN 13501-4; E600 120 (ve i <-> o) S1000C300MAsingle Fläkt Woods ESAR fullfills the requirements for MA class for opening / closing (25 min, 600 C) Suitable both for AA and MA smoke control systems INSTALLATION Installation instructions from Fläkt Woods has to be followed to be able to fulfill fire classification. The duct outlet must be placed so that the extraction damper is protected from water coming from outside as well as ice and snow that could hinder the opening of the damper. The ductwork section between the smoke extraction damper and duct outlet must be designed and insulated so that the fire resistance and tightness requirements are met. Also take account of possible condensation.
FWG-Fire damper-esar-technical data-en-2017.03.15 9417EN Copyright 2017 Fläkt Woods Group WE BRING BETTER AIR TO LIFE WWW.FLAKTWOODS.COM ESAR 9417EN 20170315 With over a century of innovation and expertise to share with our customers, Fläkt Woods is a global leader in Air Technology products and solutions. We specialize in the design and manufacturing of a wide range of products and solutions for Air Movement, Air Treatment, Air Distribution, Air Management and Air Diffusion with focus on two major benefits Air Comfort and Fire Safety. With market presence in 65 countries we are in a unique position to be a local supplier and an international partner in our customer s projects. Our product brands such as SEMCO, eq, eq Prime, JM Aerofoil, Econet, Veloduct, Optivent, Optimix, Econovent and Cleanvent are well-known and trusted by customers all over the world to deliver high quality and energy efficient solutions.» To learn more about our offering and get in contact with your nearest sales representative please visit www.flaktwoods.com