Agent - Manufacturer of Boreal geothermal heat pumps The ground source heat pump system is most advantageous heating and air-conditioning system available: economical, clean and environmental! Economical: Compared with electrical heating, a ground source heat pump system will enable you to save more than 66 % of the annual costs of energy. Clean: No combustion inside the house thus, a system of an exceptional cleanliness. Renewable energy: To heat and air-condition a building using a source of natural, renewable and nonpolluting energy constitute a step moreover in walk aiming at reducing the gas emissions, source of the global warming. It help to reduce the impact of the human activity on the environment. Email: info@boreal-geothermal.com Recycled Paper Web site: www.geothermie-boreale.com
HW Series (W) (Water-to-Water) GEOTHERMAL HEAT PUMP Equipment Summary Boreal heat pumps are available in the following series: HW (Water-to-Water) units are available with domestic hot water desuperheaters and as either heating only or heating /cooling systems. Very popular for use with a radiant floor heating system, swimming pool heating, or any other application where large quantities of hot water are required. Available in high capacity configurations with dual compressors (HW3 system) to give 3 stages of capacity at an ultra high efficiency rate. High Capacity Geothermal Heat Pump Hot / Cold Water Output Geothermal Heat Pumps. Radiant Floor Heating System, Fancoil. Heating and Cooling, Domestic Hot Water production. Simultaneously Heating / Cooling design. Output capacities from 24,000 Btu to 780,000 Btu (High Capacity Commercial Geothermal Heat Pumps). Wastewater, Water-well or Ground Loop operation. HW Series Applications : Office buildings, Schools, Hotels, Ice rinks, Swimming pools, Other commercial, recreational and institutional facilities; Greenhouses; Pulp and Paper, Textile, Food processing and Other industries. AC Split Series (RS) COMPRESSOR SECTION GEOTHERMAL HEAT PUMP (Water-to-Refrigerant) and REMOTE AIR HANDLER (Refrigerant-to-Air) For use with a Remote Air Handler. Output capacities from 36,000 Btu to 780,000 Btu. Wastewater, Water-well or Ground Loop operation. ACS series Applications : Heating and a Cooling source for Homes and Buildings, Make Up Air source for commercial, recreational and institutional facilities and industries. - Engine noise programmable ECM breakdown with direct and long life. - Copenland screw compressor «Scroll» in two courses. - Refigerant R-410a without danger for the ozone layer.
Water-to-Air) WELL L A L A AND P DC full package units contain both compressor and blower sections of the heat pump in one cabinet. The desuperheater coil for production of domestic hot water is a standard option. Units are operated with water from an open well and discharge the water either to a return well or other suitable method. The refrigeration circuit is only operated in the heating mode while cooling is provided directly by pumping cold well water to the special section of the air coil. The most economical and ecological heating and cooling available on the market. Domestic hot water available only during heating mode. Ducted Air Heating and Passive (Direct) Cooling (by pumping cold well water directly to the air coil). Specially designed for Water-well operation. DC Series DC Series Applications : Heating and a Cooling source for Homes. Water-to-Air) REVERSIBLE SERIES L A AND L A P. (also available in a horizontal configuration) AC full package units are similar in appearance to the (DC) series however they offer mechanical cooling and are specifically suited to either well water or geothermal ground loops. Active cooling is required for a geothermal groundloop application due to the high loop fluid temperatures which may be encountered during summer operation. Can provide more cooling than (DC) style units. The desuperheater coil is a standard option. Domestic hot water is available in both heating and cooling mode. Ducted Air Heating and Mechanical (Active) Cooling. Water-well or Ground Loop operation. Applications : Heating and a Cooling source for Homes and Buildings, Make up air source for commercial, recreational and institutional facilities and industries. AC Series Water-to-Air) L A P. 17,5 inches high, designed to be installed above false ceilings. Ducted Air Heating and Mechanical (Active) Cooling. Output capacities from 36,000 Btu to 60,000 Btu. Water-well or Ground Loop operation, other available water supply. Applications : Heating and a Cooling source for Schools and Commercial Buildings, Make up air source for commercial and institutional facilities. ACH Series
AHW Series (TF) (Water-to-Water and Water-to-Air in the same machine) TRIPLE FUNCTION SERIES GEOTHERMAL HEAT PUMP. AHW units provide hot air or full capacity hot water on demand with priority set to the air side of the machine. This means that the unit will automatically look after the heating or cooling of the home as required by the thermostat... any off cycle time can be used to generate full capacity hot water. Excellent for a radiant floor heating system on one floor and area with ducted heating and cooling in another. AHW models are also ideal for heating an indoor or outdoor swimming pool or spa. The desuperheater coil is a standard option. Domestic hot water is available in both heating and cooling modes. Hot / Cold Air or Full Capacity of Hot Water on Demand Geothermal Heat Pumps. Ducted Air Heating and Mechanical (Active) Cooling and Radiant Floor Heating System. Water-well or Ground Loop operation. Applications : Heating and a Cooling source for Homes and Buildings. AHW Series IFW Series (Water-to-Water) ENERGY MODULE SERIES GEOTHERMAL HEAT PUMP. IFW units provide an easily applied solution for the marriage of a radiant floor heating system to a geothermal heat pump. Required components such as the HP, 316 SS distribution tank, domestic hot water, back-up heat, expansion tank, floor circulator, pressure gauges, thermostats and relief valves are built into one easy to install package. Hot Water Output Geothermal Heat Pumps. The IFW series packages all the components required to combine a Radiant Floor Heating System to a GHP. Water-well or Ground Loop operation. Applications : Heating source for Homes and Buildings. IFW Series
INDOOR POOL CONDITIONERS. Indoor pool conditioners units operate by dehumidifying the pool room area and returning the latent heat back to the pool water. Properly sized units generally will also provide enough excess heat to condition the air in the pool room. An integral plenum heater attachment also allows the homeowner to initially bring the pool up to temperature without an auxiliary source of heat. Units can be constructed with either a top or side air discharge. Dehumidifying pool room, conditioning air in the pool room, preheating pool water. Output capacities from 36,000 Btu to 72,000 Btu. NOTE: The PC is NOT a Geothermal Product. PC Series Two Well System Horizontal Closed Loop Vertical Closed Loop Open Loop Water Flow Model HP IGPM Home IGPM Total IGPM Boreal 45 8 3 11 Boreal 55 10 3 13 Boreal 65 12 3 15 Model Horiz. Loop Req d per Linear Ft. Plastic Pipe Ground Loop Minimum Requirements Horiz. 250 Ft. Trenches Req d Horiz. Loop Min. Area (10 Ft. Spacing) Sq. Ft. Sizing Chart Model CFM Available Floor Grills Will Heat (Sq. Ft.) Output Btu Boreal 45 1600 16 1800 43,000 Boreal 55 1800 20 2700 51,000 Boreal 65 2000 24 3500 58,000 Assumes groundwater temperature of 45 F. Higher EWT or flows will yield greater performance. Min. Seperation between Loops Vertical Loop Req d (Ft.) (U Tube) Vertical Borehole Req d (Ft.) Min. Seperation between Boreholes (Ft.) Boreal 45 1500 3 10,500 10 900 450 15 Boreal 55 2000 4 14,000 10 1200 600 15 Boreal 65 2500 5 17,500 10 1500 750 15 Assumes ground temperature of 45 F. Warmer earth temperature may allow shorter loop lengths.
Geothermal Pipe Energy efficient solutions Complete range of HDPR 3408 geothermal piping products for downhole / horizontal geothermal loop systems (close-loop, ground coupled refrigerating and heating applications). Meets specifications madated by the Canadian Standard Association (CSA C448). SDR 9, 11, 13.5, 15.5 and 17. Coil Coil pipe is available in 3/4", 1", 1-1/4", 1-1/2", and 2" sizes. U-Bend Coil Prefabricated pressurised U-bend coil (unicoil). The installation-ready unicoils are available in sizes 3/4", 1", and 1-1/4". Available in variety of lengths including 310' (150' bore hole), 410' (200' bore hole), 510' (250' bore hole), 610' (300' bore hole). Straight Pipe Straight pipe is available in 3/4", 1", 1-1/4", 1-1/2", 2" and 3" sizes. Pumping unit Accessories Boreal Geothermal Inc. carries a variety of heating and ground loop accessories such as: Electric plenum heaters Pump modules Thermostats Valves Headers Ground loop pump kits Fittings and adapters Fabricated custom U-bend assemblies Flowmeter Retailer Draining unit P/T plugs Please contact us at 450 534-0203 or email info@boreal-geothermal.com for a complete offering of geothermal pipe fittings. Merge set